NEED VL02N VL09 USER-EXIT FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER

I NEED VL02N VL09 USER-EXITS FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER POSITIONS.
F.X: IF POST QUANTITY 10, BUT PURCHASE ORDER POSITION QUANTITY 30, I NEED AT ANY CASE TO SET DELIVERY COMPLETE INDICATOR FOR RELEVANT OUTBOUND DELIVERY AN P. ORDER POSITIONS.
THANKS/

Hi Malka,
It's possible set the system to mark automatically the delivery completed indicator.
First you need to set the under delivery and over delivery tolerances.You do this in customizing:
Materials Management under Purchasing -> Material Master -> Define Purchasing Value Keys.
Once you set this, you can insert this value keys on Material Master Record for the materials.
When you create the PO with a material with this value keys set the system will check the under delivery and over delivery set on customizing.
In customizing you also have the option to let the system mark automatically the delivery indicator based on delivery tolerances set.
In Customizing for Inventory Management and Physical Inventory under Goods Receipt -> Set Delivery Completed Indicator, you can determine for each plant whether the system automatically sets the delivery completed indicator for delivery quantities within the underdelivery and overdelivery tolerances.
You can test setting the under delivery for 0 (with a warning message) and see if the system will only mark delivery complete only for over delivery.
You can also work with the following Badi: MB_GOODSMOVEMENT_DCI. This Badi also allows custom logic for setting the delivery completed indicator in a PO item.
Message: M7 433 (The "delivery completed" indicator is set for the purchase order item)
Regards,
Rodrigo

Similar Messages

"Delivery Completed" Indicator in Purchase Order

Hi,
While doing GR, we want to check the "Delivery Completed" on the Goods Receipt Screen if we are expecting no future receipt against the Purchase Order.
On SDN & SAP Note, I got to know that we canu2019t tick the "Delivery Completed" Check Box while doing Goods Receipt.
We have implemented the Release Strategy on the Purchase Order. To tick the "Delivery Completed" Check Box, we need to cancel the Release Strategy.
Is there any other way (T Codes) to achieve the same?
Regards,

Even you flag Delivery Completed" Indicator in Purchase Order, system still allows GRN for open Qty.
Use MEMASSPO trxn & Put Deletion indicator for the PO Line Item. So that you can not do GRN for the open Qty of PO line item.
Check
mass setting of delivery completed indicator

User exits for delivery picking confirmation and transfer order creation

Hi
We have a scenario for which we need help.
This is to do with replenishment from plant to plant.
We have sales sets.
The sales sets needs to be replenished from one plant to another. We want the componenets of the sales sets to picked from the issuing plant. For this we need a transfer order. this needs tobe confirmed and then the goods issue should take place from the issuing plant. Its a two step process.
we are doing Sales sets in STO. The explosion takes place in STO. However when we create deliveries for this. Only the sales set header item without its components are flowing into the delivery.
The Tranfer order does not contain the components either.
However post the goods issue we can create a TO with reference to the TR. This is is not acceptable because we want the picking and confirmation to occur before PGI from the issuing plant.
Could anybody help: We want the TO to be created with the components even though in the delivery only the Sales set header appears. Can u suggest a user exit in which when we create the TR from the delivery the components of the set.
After confirmation of the TO then we want the picking status to be put as C.
Supreeth

Hi,
Check the following users exits.
MWMRFSSG            user exit for sorting TOs in RF system-guided transaction
MWMRFUP             Customer defined general purpose pushbutton called from scr.
MWMRP001            Cust. Exit for Fixed Bin Replenish.: Delivery Item Selection
MWMRP002            Cust. Exit for Fixed Bin Replenishment: TR Quantity Distr.
MWMRP003            Customer Exit for Replenishment using RLLNACH1
MWMRP004            User Exit for Replenishment using RLLNACH4
MWMTO001            Enhancements for end of transfer order generation
MWMTO010            Exit: Calculation of Total Planned TO Processing Time
MWMTO011            Correction of Planned Processing Time for TO Item
MWMTO012            Correction of Sorting and Split Transfer Order
MWMTO013            Stock Removal for Sev. Storage Types as in Stringent FIFO
MWMTOAU3            Separate selection of posting changes for autom.TO creation
MWMTR001            Exits at the end of transfer rqmnt creation (IM,PP interf.)
MWMD0001            Transfer order print via RLVSDR40
MWMD0002            Transfer order print as multiple process with RLKOMM40
MWMIDI07            Enhancement for Output WMPIHU (Create Pick-HU) Inbound
MWMIDO11            Enhancement for message WMTORD: TO with several items
MWMIDO12            Enhancement for Output WMPIHU (Pick-HUs) Outbound
MWMIDO13            Extension for WMMBXY (subsequent tasks after goods movement)
MWMPP001            Enhancement WM/PP Interface (automatic TR generation)
Regards,
Murali

User exit for setting tax indicator in Sale order

Hi All,
I want to know if there is a way (user exit) that could look at the Sales Order Type , particular Item Pricing Condition and Ship-to party State and set the materialu2019s tax classification (VBAP/TAXM1) to u201C0u201D (Exempt) ?
Thanks in Advance!
Sonali.

Hi Ramesh,
I have put the code in the user exit, and I am able to set the tax classification indicator but I have a problem... Before setting the indicator I need to check for the Usage code of the line item (This code I am using instead of checking the Pricing condition) . I am able to read all the values of line item in VBAP structure in the user exit except for the first time this user exit is hit as soon as a line item is entered it is not picking up the Usage code. That field is blank.
But if add another line item and go into the user exit I can see the previous line item Usage code in XVBPA table.
Do you have any idea why usage code is missing in VBAP structure in the user exit or is there any other table or structure where I can get the usage code?
Thanks in Advance!
Sonali.

Delivery completed indicator in purchase order for service item

How can I make the delivery completed indicator (EKPO-ELIKZ) in a purchase order for a service item ready for direct changes.
Per default this field is hidden on purpose for service items (according to SAP note 735404). Please inform me of customizing entry where that can be changed!
Thanks,
Johnny

delivery completed indicator only gives information for MRP ( That not consider balance qty as onorder stock), it has no control on GR, so I am not sure what you will achieve to mark it in service PO?

User exit for check/save/hold in Purchase order

>The client requirement is like this :-
>The client has development a Order Approval Form process and want the user to create all the purchase orders having value all inclusive value of Purchase order above Rs. 300000/-.
>The user should not be able to save/hold/modify any purchase order above Rs. 300000/- in normal SAP through tcodes ME21N, ME22N, ME23N.
>For this we need to use a user exit and flash an error message that PO value is above Rs. 300000/-, hence please process the purchase order in OAF.
>Can any one please provide details of which user exit to use for the above scenario.
>Thanks in advance
>AJ

BADi:ME_PROCESS_PO
Method: PROCESS_HEADER
PROCESS_ITEM
Or
BADi:ME_PROCESS_PO_CUST
Method: PROCESS_HEADER
PROCESS_ITEM
Call your ABAPer to do the same.

User-exit for ME59 - Automatic creation of Purchase Order from Requisitions

Hi,
In ME59, is there a way to prevent PO of being saved, but instead created with the « hold » option?

Hi,
I tried this for ME59N and struggled.
I think EXIT_SAPMM06E_013 cannot change EKKO (it only imports it as the exit is for posting customer data) and BAdi ME_PROCESS_PO_CUST cannot change MEMORY because method SET_DATA uses mepoheader (and later mepoheaderx).
Check the two structures in SE11, in our ECC5 system mepoheaderx doesn't have field "memory" so the BAdi can work out its been changed (via method SET_DATA).
Even though lots of people have asked this question and the same exits/BAdi get highlighted I cannot see anyone confirming that they have managed to do it.
If anyone has then please share the details.
Thanks, Matt

BDC/BAPI for set delivery cmlition indicator in purchase order @ item level

Hi Expert,
could you please suggest me bapi to set/reset delivery completion indicator in purchase order at item level for t-code "ME22n"?
Thanks and regard,
Santosh Gupta

Use BAPI_PO_CHANGE to set the delivery completed indicator.
Refer to table section in the BAPI Interface
POITEM LIKE BAPIMEPOITEM
POITEMX LIKE BAPIMEPOITEMX
Set Field POITEM-NO_MORE_GR = 'X' & Set field POITEMX-NO_MORE_GR = 'X'

User exit for Delivery output execution

Hello All,
         My query is i need a delivery relevant user exit for output trigger which the specific order reason and for this only it should trigger in the VL01N (delivery) output. Kindly let me know if any user exit is there where i can give my condition(by checking the specific order reason from the proceding sales document) and for that only it should trigger in the VL01N output . PLZ let me know the answer ASAP.

Hi
Check the following enhancements and BADI's
Enhancement
VMDE0004                                Shipping Interface: Message SDPACK (Packing, Inbound)
VMDE0003                                Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0002                                Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0001                                Shipping Interface: Error Handling - Inbound IDoc
V53W0001                                User exits for creating picking waves
V53C0002                                W&S: RWE enhancement - shipping material type/time slot
V53C0001                                Rough workload calculation in time per item
V50S0001                                User Exits for Delivery Processing
V50R0004                                Calculation of Stock for POs for Shipping Due Date List
V50R0002                                Collective processing for delivery creation
V50R0001                                Collective processing for delivery creation
V50Q0001                                Delivery Monitor: User Exits for Filling Display Fields
V50PSTAT                                Delivery: Item Status Calculation
V02V0004                                User Exit for Staging Area Determination (Item)
V02V0003                                User exit for gate + matl staging area determination (headr
V02V0002                                User exit for storage location determination
V02V0001                                Sales area determination for stock transport order
Business Add-in
DELIVERY_ADDR_SAP                       Address Change in Delivery Processing
DELIVERY_PUBLISH                        Announcement of delivery data during database update
Also look at the Standard program of Delivery SAPMV50A
for the user exit Include MV50AFZZ
<b>Reward points for useful Answers</b>
Regards
Anji

User Exit for Delivery Updating

Hi,
I am creating one user exit for delivery ,
My condition:
If XLIKP-UPDKZ (Update indicator) = Update (U).
Read table Deferred COGS Activity (Z1009) with key
Delivery Number eq LIKP-VBELN.
If sy-subrc <> 0
Exit.
Else.
If V50AGL-WARENAUSGANG=X (PGI is active)
Update table Z1009 with
WADAT_IST = XLIKP-WADAT_IST
PGI_ERNAM = SY-UNAME
PGI_ERDAT = SY-DATUM.
where Delivery Number (DL_NO) eq LIKP-VBELN.
If delivery updated successfully then no problem ,
if not updated then I need to through error message to log.
I need Function Module for this.
Can u help me.

These ar all the User Exits used in VL01N.
Exit Name           Description
V02V0001            Sales area determination for stock transport order
V02V0002            User exit for storage location determination
V02V0003            User exit for gate + matl staging area determination (headr)
V02V0004            User Exit for Staging Area Determination (Item)
V50PSTAT            Delivery: Item Status Calculation
V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
V50R0001            Collective processing for delivery creation
V50R0002            Collective processing for delivery creation
V50R0004            Calculation of Stock for POs for Shipping Due Date List
V50S0001            User Exits for Delivery Processing
V53C0001            Rough workload calculation in time per item
V53C0002            W&S: RWE enhancement - shipping material type/time slot
V53W0001            User exits for creating picking waves
VMDE0001            Shipping Interface: Error Handling - Inbound IDoc
VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)
You can also look at BADI: LE_SHP_DELIVERY_PROC. It has several implementations which could be useful to you.

User Exit for Delivery Creation

Hi,
I am looking for an User Exit for Delivery Creation, which should provide a Sales Order Number. This is required before Batch determination. Can any one help.

Hi,
I think you can try with MV50AFZ1 user exit.
In move fields to LIKP and LIPS routine you can get the sales order.
LIPS-VGBEL gives the sales order.
Thanks,
Rohan

Extended Idoc - User exit for delivery VL01 and Invoice VF01

Hi Experts,
We are developing Extended Idoc for order - cash cycle.The extended Idoc contains 4 extra fields.
I want to know the User exits where i can populate the extended segment field values for VL01 and VF01 transactions.

HI
exits available for VL01.
VMDE0004                                Shipping Interface: Message SDPACK (Packing, Inbound)
VMDE0003                                Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0002                                Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0001                                Shipping Interface: Error Handling - Inbound IDoc
V53W0001                                User exits for creating picking waves
V53C0002                                W&S: RWE enhancement - shipping material type/time slot
V53C0001                                Rough workload calculation in time per item
V50S0001                                User Exits for Delivery Processing
V50R0004                                Calculation of Stock for POs for Shipping Due Date List
V50R0002                                Collective processing for delivery creation
V50R0001                                Collective processing for delivery creation
V50Q0001                                Delivery Monitor: User Exits for Filling Display Fields
V50PSTAT                                Delivery: Item Status Calculation
V02V0004                                User Exit for Staging Area Determination (Item)
V02V0003                                User exit for gate + matl staging area determination (headr)
V02V0002                                User exit for storage location determination
V02V0001                                Sales area determination for stock transport order
For VF01..
Enhancement
V61A0001                                Customer enhancement: Pricing
V60P0001                                Data provision for additional fields for display in lists
V60A0001                                Customer functions in the billing document
V05N0001                                User Exits for Printing Billing Docs. using POR Procedure
V05I0001                                User exits for billing index
SDVFX011                                Userexit for the komkcv- and kompcv-structures
SDVFX010                                User exit item table for the customer lines
SDVFX009                                Billing doc. processing KIDONO (payment reference number)
SDVFX008                                User exit: Processing of transfer structures SD-FI
SDVFX007                                User exit: Billing plan during transfer to Accounting
SDVFX006                                User exit tax line in transfer to accounting
SDVFX005                                User exit reserves in transfer to accounting
SDVFX004                                User exit G/L line in transfer to accounting
SDVFX003                                User exit cash clearing in transfer to accounting
SDVFX002                                User exit for A/R line in transfer to accounting
SDVFX001                                User exit header line in delivery to accounting
J_3RSINV

User exit for Delivery Module

Hi ,
I had a include program in Development for Delivery module, "MV50AFZ1" in program "SAPMV50A", which is supposed to be a user exit. So I transported that to production on clients requirement, but then its creating some problems for client, so he wants his previous program to be back. But I can't change this "MV50AFZ1" program in development nor in Production. So how could I bring that previous code in production.
Plz help, and if possible tell me how can I change "MV50AFZ1" program code.
Thanks.
Shailesh.

check the below link for user exits in SD
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
Some more links r here....
User Exits In Sales Document Processing
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
Get the access key from basis for the program SAPMV45A. And change the screen.
First create a subscreen with that two fields, call that subscreen in the screen 8309.
call subscreen s2 including 'SAPMV45A' '9002'.
How to add custoim fields on the additiondata b tab of va01 and va02
VA01/VA02 screen exit
Re: Is there any enhancement available .....for va01??
Add a field in va01 transaction
Additional Screen field in VA41 or VA01
Here are the user exits available for creating PO.
AMPL0001 - User subscreen for additional data on AMPL
LMEDR001 - Enhancements to print program
LMELA002 - Adopt batch no. from shipping notification when posting a GR
LMELA010 - Inbound shipping notification: Transfer item data from IDOC
LMEQR001 - User exit for source determination
LMEXF001 - Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 - Customer-Specific Source Determination in Retail
M06B0001 - Role determination for purchase requisition release
M06B0002 - Changes to comm. structure for purchase requisition release
M06B0003 - Number range and document number
M06B0004 - Number range and document number
M06B0005 - Changes to comm. structure for overall release of requisn.
M06E0004 - Changes to communication structure for release purch. doc.
M06E0005 - Role determination for release of purchasing documents
ME590001 - Grouping of requsitions for PO split in ME59
MEETA001 - Define schedule line type (backlog, immed. req., preview)
MEFLD004 - Determine earliest delivery date f. check w. GR (only PO)
MELAB001 - Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 - Enhancement to Document Overview ME21N/ME51N
MEVME001 - WE default quantity calc. and over/ underdelivery tolerance
MM06E001 - User exits for EDI inbound and outbound purchasing documents
MM06E003 - Number range and document number
MM06E004 - Control import data screens in purchase order
MM06E005 - Customer fields in purchasing document
MM06E007 - Change document for requisitions upon conversion into PO
MM06E008 - Monitoring of contr. target value in case of release orders
MM06E009 - Relevant texts for "Texts exist" indicator
MM06E010 - Field selection for vendor address
MMAL0001 - ALE source list distribution: Outbound processing
MMAL0002 - ALE source list distribution: Inbound processing
MMAL0003 - ALE purcasing info record distribution: Outbound processing
MMAL0004 - ALE purchasing info record distribution: Inbound processing
MMDA0001 - Default delivery addresses
MMFAB001 - User exit for generation of release order
MRFLB001 - Control Items for Contract Release Order
EXIT_SAPMM06E_001 Other Number Range or Own Document Number
EXIT_SAPMM06E_004 User Exit for Cust.-Specific Control of Import Data Screens in Purchasing
EXIT_SAPMM06E_005 Field Selection Control: Vendor Address Screen
EXIT_SAPMM06E_006 Export Data to Customer Subscreen for Purchasing Document Header (PBO)
EXIT_SAPMM06E_007 Export Data to Customer Subscreen for Purchasing Document Header (PAI)
EXIT_SAPMM06E_008 Import Data from Customer Subscreen for Purchasing Document Header
EXIT_SAPMM06E_009 Reset Customer Data at Beginning of New Document (Without Dialog)
EXIT_SAPMM06E_010 Export of Service RFQ Data
EXIT_SAPMM06E_011 Import Service Prices for Quotation
EXIT_SAPMM06E_012 Check Customer-Specific Data Before Saving
EXIT_SAPMM06E_013 Update Customer-Specific Data in Purchasing Document
EXIT_SAPMM06E_014 Read Customer-Specific Data when Importing Purchasing Document
EXIT_SAPMM06E_016 Export Data to Customer Subscreen for Purchasing Document Item (PBO)
EXIT_SAPMM06E_017 Export Data to Customer Subscreen for Purchasing Document Item (PAI)
EXIT_SAPMM06E_018 Import Data from Customer Subscreen for Purchasing Document Item
EXIT_SAPMM06E_020 User Exit: Change Document for Requisitions (Conversion into PO)
EXIT_SAPMM06E_021 Fulfillment of Target Value: Release Orders Against a Contract
EXIT_SAPMM06E_022 Relevant Texts for "Texts Exist" Indicator
EXIT_SAPMM06E_023 Definition of Relevant Texts for "Texts Exist" Indicator
EXIT_SAPMM06E_024 Customer Enhancement: Activate PReq Block
user exit for sto
Regards.

User-exit for delivery while assigning serial numbers(urgent)

hi all,
can u plz tell me the specific user exit for delivery (VL01n) while assigning serial numbers?
i am getting the serial numbers for material in database table OBJK .i am also getting these serial no.s in IQ01.
   while doing delivery,i am going for extra-->serial number.at this time one screen for serial number is comming.those serial numbers which are stored in objk will transfer to this screen of delivery automatically.
for this , i want a specific user-exit for delivery so that i can transfer the serial nos from objk to that screen of delivery.plz suggest .(urgent )
any idea is highly appreaciated
Regards
pabitra

You can find from below list of user exists
V02V0001            Sales area determination for stock transport order
V02V0002            User exit for storage location determination
V02V0003            User exit for gate + matl staging area determination (headr)
V02V0004            User Exit for Staging Area Determination (Item)
V50PSTAT            Delivery: Item Status Calculation
V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
V50R0001            Collective processing for delivery creation
V50R0002            Collective processing for delivery creation
V50R0004            Calculation of Stock for POs for Shipping Due Date List
V50S0001            User Exits for Delivery Processing
V53C0001            Rough workload calculation in time per item
V53C0002            W&S: RWE enhancement - shipping material type/time slot
V53W0001            User exits for creating picking waves
VMDE0001            Shipping Interface: Error Handling - Inbound IDoc
VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)

USER-EXIT for DELIVERY--very very urgent

Hi all,
can u plz tell me the user-exit for delivery i.e this exit should be called after the delivery order is created.
plz suggest some specific exit.it is very very urgent.
Regards
pabitra

Rout ,
u cannt find out user exits after the Creation.
V02V0001            Sales area determination for stock transport order
V02V0002            User exit for storage location determination
V02V0003            User exit for gate + matl staging area determination (headr)
V02V0004            User Exit for Staging Area Determination (Item)
V50PSTAT            Delivery: Item Status Calculation
V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
V50R0001            Collective processing for delivery creation
V50R0002            Collective processing for delivery creation
V50R0004            Calculation of Stock for POs for Shipping Due Date List
V50S0001            User Exits for Delivery Processing
V53C0001            Rough workload calculation in time per item
V53C0002            W&S: RWE enhancement - shipping material type/time slot
V53W0001            User exits for creating picking waves
VMDE0001            Shipping Interface: Error Handling - Inbound IDoc
VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)
*        FORM-Routinen für Userexits
         include mv50afzz.
         include mv50afz1.
         include mv50afz2.
         include mv50afz3.          "Userexit neu zu Release 3.0A
         include mv50afzk.          "Userexit 4.6A (KOMKG/KOMPG)
         include mv50afzl.          "Userexit 4.6A Liefergruppen
                                                               "n_693000
         include mv50afzp.          "Userexit for pricing screen input
Regards
Prabhu

NEED VL02N VL09 USER-EXIT FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER

Similar Messages

Maybe you are looking for