Needed Idea for the creation of this report

HI Experts............
    I need to genrate reports on the Transport status. Format of the report
user entery is user id : user 001
  column 1              column 2          column3        column4
No of request       devlopment     Q/A system   production
      8                           2                       4                   2
I have found the table name which contains the transport data that is E070
in this table i have field called status but it gives the status for transport object and not for the transport request
i need to find current status of the transport wether it is in quality or in production or in devlopment .
how to slove this problem
it would b great help  if any one give a solution
Thank u  
gopu77

<font type="verdana">
sql>select * from chem;
<br>
FORMULA CHEM WT RT
<br>
fm1 ch1 10 100
<br>
fm1 ch2 12 200
<br>
fm2 ch1 2 1100
<br>
fm1 ch2 6 2100
<br>
report will be like this
<br>
<img src="http://k.jeneesh.googlepages.com/img1.bmp"/>
</font>
Message was edited by:
jeneesh

Similar Messages

  • HT1349 My Macbook Pro was stolen and I need the serial number. How would I find this? I need it for the police report so if I could get answers soon that would be great, thanks :)

    How would I find this? I need it for the police report so if I could get answers soon that would be great, thanks

    Lanlani wrote:
    ... It there any other solution ?
    Consider using this site: http://www.stolenlostfound.org/
    This is Apple's official word on the subject:
    Reporting a lost or stolen Apple product
    If you have lost or found an Apple product, please contact your local law enforcement agency to report it. Although Apple does not have a process to track or flag lost or stolen product, you can use My Support Profile to find a list of serial numbers for items purchased or registered with your Apple ID.

  • Some calendars in iCal appear corrupted but OK on iPhone. If I sync will the calendar data on the phone restore info on the desktop iCal? any other ideas for how to sort this please?

    Some calendars in iCal appear corrupted (ie have red exclamation mark by them) but are still OK on iPhone. If I sync, will the calendar data on the phone restore info on the desktop iCal or will I lose that as well? Or could I back up the calendars on my iPhone somewhere and then import them into iCal? any other ideas for how to sort this please? it's driving me mad. thanks.

    I don't think there will be a solution to this. Exchange 2003 just isn't supported.

  • I have a macbook pro 1175 its a 2006 model which boot camp will work i tried 4.03 but it says this boot camp is not for this machine thats the oldest one i found here please help i have windows 7 32 bit installed but need drivers for the sound

    i have a 2006 mackbook pro running windows 7 32 bit i need drivers for the sound and the earliest bootcamp on here is 4.03 my machine says its not for this system please help which version of boot camp can i use

    Read this. You need to be running Snow Leopard or later.
    http://support.apple.com/kb/ht3986

  • HT1420 i can't seem to get my iPad to synch with my new iMac.  The iTunes prompt says that this computer isn't authorised although i have registered it on iTunes.  Any other ideas for how to overcome this block?

    i can't seem to get my iPad to synch with my new iMac.  The iTunes prompt says that this computer isn't authorised although i have registered it on iTunes.  Any other ideas for how to overcome this block?

    What do you mean by 'registered it on iTunes' ? You've authorised your account on your Mac's iTunes via the Store > Authorise This Computer menu option ? And you've copied your library onto the Mac ?
    Copying content between computers : http://support.apple.com/kb/HT4527
    You may also find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141

  • *UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

    Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
    Last Updated: Thursday July 15th, 2004
    Bioses:
    (In order of date released.)
    1.1b3 - (Download)
    - Pre-1.1, given to reviewers to use in their reviews and benchmarks.
    - Less stable, but supposedly you get slightly better overclocks.
    1.1 Official - (Download)
    1. This is AWARD BIOS release
    2. This BIOS fixes the following problems of the previous version:
    - Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
    - Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
    1.2b5 - (Download)
    1.2b7 - (No Download Yet)
    1.2b10 - (Download)
    - First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
    1.2b12 - (Download)
    - Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
    1.3b1 - (Download)
    - Another attempt to fix temperature problems?
    - Possibly fixes cold boot/power light issues?
    1.2 Official - (Download)
    1. This is AWARD BIOS release
    2. This BIOS fixes the following problems of the previous version:
    - System can't resume from S3 sometimes when install USB device.
    - Support K8 Sempron CPU.
    - Turn off keyboard LED in S3.
    --Quick Guide for flashing BIOS, provided by MSI--
    1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
    2. Press "Delete" and go to BIOS setup while computer bootup.
    Check BIOS advanced features and see if BIOS flash write control is enabled
    (This option must be enabled. If you can not find this setting, it means the BIOS can be
    flashed.)
    3. Boot from MS-DOS boot diskette and get a:\> prompt.
    4. Type "", then press ENTER
    5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
    6. After flashing complete, remove floppy and reset the system .
    7. Press DELETE or F1 when prompted at first reboot after flashing.
    8. Load BIOS optimized defaults, then save settings and exits.
    Drivers & Needed Files:
    (Note: All these drivers are for Windows XP.)
    Leaked Nvidia nForce3 Chipset Drivers Version 4.40
    (Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
    *NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
    More leaked drivers? Seems some parts of the drivers are older and some are newer.
    1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
    2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
    3. Nvidia nForce3 Chipset Drivers Version 4.24
    4. AMD Athlon 64 Processor Driver Version 1.1.0.14
    5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
    (The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
    5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
    (The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
    6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
    It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
    You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
    Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

    Quote
    Originally posted by RLiu818
    Quote
    Originally posted by Deviation56
    Quote
    Originally posted by RLiu818
    You CAN install the nforce drivers BEFORE installing SP1.  The only requirement to install the nforce drivers is DX9.
    So is SP1 still recommended to install before the nforce drivers?
    The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.  
    oh.  IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed.  So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
    Simplicity-wise, i guess its pretty much equal.  It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
    but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
    i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

  • An error occurred during local report processing.The definition of the report '' is invalid.The definition of this report is not valid or supported by this version of Reporting Services. he report definition may have been created with a later version of R

    Hi,
    I am trying to create rdlc file programmatically. Using Memory Table as dataset. Here is my code
    ' For each field in the resultset, add the name to an array listDim m_fields AsArrayList
      m_fields = NewArrayList()
      Dim i AsIntegerFor i = 0 To tbdataset.Tables(0).Columns.Count - 1
          m_fields.Add(tbdataset.Tables(0).Columns(i).ColumnName.ToString)
      Next i
      'Create Report 'http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition' Open a new RDL file stream for writingDim stream AsFileStream
      stream = File.OpenWrite("D:\MyTestReport2.rdlc")
      Dim writer AsNewXmlTextWriter(stream, Encoding.UTF8)
      ' Causes child elements to be indented
      writer.Formatting = Formatting.Indented
      ' Report element
      writer.WriteProcessingInstruction("xml", "version=""1.0"" encoding=""utf-8""")
      writer.WriteStartElement("Report")
      writer.WriteAttributeString("xmlns", Nothing, "http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition")
      writer.WriteAttributeString("xmlns:rd", "http://schemas.microsoft.com/SQLServer/reporting/reportdesigner")
      writer.WriteStartElement("ReportSections")
      writer.WriteStartElement("ReportSection")
      writer.WriteElementString("Width", "11in")
      writer.WriteStartElement("Body")
      writer.WriteElementString("Height", "5in")
      writer.WriteStartElement("ReportItems")
      writer.WriteStartElement("Tablix")
      writer.WriteAttributeString("Name", Nothing, "Tablix1")
      writer.WriteElementString("Top", ".5in")
      writer.WriteElementString("Left", ".5in")
      writer.WriteElementString("Height", ".5in")
      writer.WriteElementString("Width", (m_fields.Count * 1.5).ToString() + "in")
      writer.WriteStartElement("TablixBody")
      ' Tablix Columns
      writer.WriteStartElement("TablixColumns")
      ForEach fieldName In m_fields
          writer.WriteStartElement("TablixColumn")
          writer.WriteElementString("Width", "1.5in")
          writer.WriteEndElement() ' TableColumnNext fieldName
      writer.WriteEndElement() ' TablixColumns' Header Row
      writer.WriteStartElement("TablixRows")
      writer.WriteStartElement("TablixRow")
      writer.WriteElementString("Height", ".25in")
      writer.WriteStartElement("TablixCells")
      ForEach fieldName In m_fields
          writer.WriteStartElement("TablixCell")
          writer.WriteStartElement("CellContents")
          writer.WriteStartElement("Textbox")
          writer.WriteAttributeString("Name", Nothing, "Header" + fieldName)
          ' writer.WriteAttributeString("CanGrow",  True)' writer.WriteAttributeString("Keeptogether", True)
          writer.WriteStartElement("Paragraphs")
          writer.WriteStartElement("Paragraph")
          writer.WriteStartElement("TextRuns")
          writer.WriteStartElement("TextRun")
          writer.WriteElementString("Value", fieldName)
          writer.WriteStartElement("Style")
          writer.WriteElementString("TextDecoration", "Underline")
          writer.WriteElementString("PaddingTop", "0in")
          writer.WriteElementString("PaddingLeft", "0in")
          writer.WriteElementString("LineHeight", ".5in")
          ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
          writer.WriteEndElement() ' Style
          writer.WriteEndElement() ' TextRun
          writer.WriteEndElement() ' TextRuns
          writer.WriteEndElement() ' Paragraph
          writer.WriteEndElement() ' Paragraphs
          writer.WriteEndElement() ' TexBox
          writer.WriteEndElement() ' CellContents
          writer.WriteEndElement() ' TablixCellNext
      writer.WriteEndElement() ' TablixCells
      writer.WriteEndElement() ' TablixRow'writer.WriteEndElement() ' TablixRows          Do not close Rows tag here colse it after details'End of Headers'Details Rows'writer.WriteStartElement("TablixRows")         Since Rows tag in header is not closed not need to open fresh tag
      writer.WriteStartElement("TablixRow")
      writer.WriteElementString("Height", ".25in")
      writer.WriteStartElement("TablixCells")
      ForEach fieldName In m_fields
          writer.WriteStartElement("TablixCell")
          writer.WriteStartElement("CellContents")
          writer.WriteStartElement("Textbox")
          writer.WriteAttributeString("Name", Nothing, fieldName)
          '  writer.WriteAttributeString("CanGrow", True)'  writer.WriteAttributeString("Keeptogether", True)
          writer.WriteStartElement("Paragraphs")
          writer.WriteStartElement("Paragraph")
          writer.WriteStartElement("TextRuns")
          writer.WriteStartElement("TextRun")
          'writer.WriteElementString("Value", fieldName)
          writer.WriteElementString("Value", "=Fields!" + fieldName + ".Value")
          writer.WriteStartElement("Style")
          writer.WriteElementString("TextDecoration", "Underline")
          writer.WriteElementString("PaddingTop", "0in")
          writer.WriteElementString("PaddingLeft", "0in")
          writer.WriteElementString("LineHeight", ".5in")
          ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
          writer.WriteEndElement() ' Style
          writer.WriteEndElement() ' TextRun
          writer.WriteEndElement() ' TextRuns
          writer.WriteEndElement() ' Paragraph
          writer.WriteEndElement() ' Paragraphs
          writer.WriteEndElement() ' TexBox
          writer.WriteEndElement() ' CellContents
          writer.WriteEndElement() ' TablixCellNext
      writer.WriteEndElement() ' TablixCells
      writer.WriteEndElement() ' TablixRow
      writer.WriteEndElement() ' TablixRows'End of Details Rows
      writer.WriteEndElement() ' TablixBody
      writer.WriteStartElement("TablixRowHierarchy")
      writer.WriteStartElement("TablixMembers")
      writer.WriteStartElement("TablixMember")
      ' Group
      writer.WriteElementString("KeepWithGroup", "After")
      writer.WriteEndElement() ' TablixMember' Detail Group
      writer.WriteStartElement("TablixMember")
      writer.WriteStartElement("Group")
      writer.WriteAttributeString("Name", Nothing, "Details")
      writer.WriteEndElement() ' Group
      writer.WriteEndElement() ' TablixMember
      writer.WriteEndElement() ' TablixMembers
      writer.WriteEndElement() ' TablixRowHierarchy
      writer.WriteStartElement("TablixColumnHierarchy")
      writer.WriteStartElement("TablixMembers")
      'writer.WriteStartElement("TablixMember")ForEach fieldName In m_fields
          writer.WriteStartElement("TablixMember")
          writer.WriteEndElement() ' TablixMemberNext' writer.WriteEndElement() ' TablixMember
      writer.WriteEndElement() ' TablixMembers
      writer.WriteEndElement() ' TablixColumnHierarchy
      writer.WriteElementString("DataSetName", "tbdataset")
      writer.WriteEndElement() ' Tablix
      writer.WriteEndElement() ' ReportItems
      writer.WriteEndElement() ' Body
      writer.WriteStartElement("Page")
      ' Page Header Element
      writer.WriteStartElement("PageHeader")
      writer.WriteElementString("Height", "1.40cm")
      writer.WriteStartElement("ReportItems")
      writer.WriteStartElement("Textbox")
      writer.WriteAttributeString("Name", Nothing, "Textbox1")
      writer.WriteStartElement("Paragraphs")
      writer.WriteStartElement("Paragraph")
      writer.WriteStartElement("TextRuns")
      writer.WriteStartElement("TextRun")
      writer.WriteElementString("Value", Nothing, "ABC CHS.")
      writer.WriteEndElement() ' TextRun
      writer.WriteEndElement() ' TextRuns
      writer.WriteEndElement() ' Paragraph
      writer.WriteEndElement() ' Paragraphs
      writer.WriteEndElement() ' TextBox
      writer.WriteEndElement() ' ReportItems
      writer.WriteEndElement() ' PageHeader
      writer.WriteEndElement() ' Page
      writer.WriteEndElement() ' ReportSection
      writer.WriteEndElement() ' ReportSections' DataSources
      writer.WriteStartElement("DataSources")
      writer.WriteStartElement("DataSource")
      writer.WriteAttributeString("Name", Nothing, "tbdata")
      writer.WriteStartElement("DataSourceReference")
      writer.WriteEndElement() ' DataSourceReference
      writer.WriteEndElement() ' DataSource
      writer.WriteEndElement() ' DataSources'DataSet
      writer.WriteStartElement("DataSets")
      writer.WriteStartElement("DataSet")
      writer.WriteAttributeString("Name", Nothing, "tbdataset")
      writer.WriteStartElement("Query")
      writer.WriteElementString("DataSourceName", Nothing, "tbdata")
      'writer.WriteElementString("CommandText", Nothing, "/* Local Query */")
      writer.WriteElementString("CommandText", Nothing, "TableDirect")
      writer.WriteEndElement() ' Query'Fields
      writer.WriteStartElement("Fields")
      ForEach fieldName In m_fields
          writer.WriteStartElement("Field")
          writer.WriteAttributeString("Name", Nothing, fieldName)
          writer.WriteElementString("DataField", fieldName)
          writer.WriteElementString("rd:TypeName", fieldName.GetType.ToString)
          writer.WriteEndElement() ' FieldNext
      writer.WriteEndElement() ' Fields' rd datasetinfo
      writer.WriteEndElement() ' DataSet
      writer.WriteEndElement() ' DataSets
      writer.WriteEndElement() ' Report' Flush the writer and close the stream
      writer.Flush()
      stream.Close()
      'Convert to StreamDim myByteArray AsByte() = System.Text.Encoding.UTF8.GetBytes("D:\MyTestReport2.rdlc")
      Dim ms AsNewMemoryStream(myByteArray)
      'Supply Stream to ReportViewer
      ReportViewer1.LocalReport.LoadReportDefinition(ms)
      ReportViewer1.LocalReport.Refresh()When I open rdlc in designer I get following error"Data at the root level is invalid."When I run the aspx I get following error
    An error occurred during local report processing.
    The definition of the report '' is invalid.
    The definition of this report is not valid or supported by this version of Reporting Services.
    The report definition may have been created with a later version of Reporting Services, or contain content that is not well-formed or not valid based on Reporting Services schemas.
    Details: Data at the root level is invalid. Line 1, position 1.
    Can anybody guide me?

    Hi Wendy Fu,
    Thanks for your feed back. I could see Microsoft.ReportViewer.ProcessingObjectModel.dll to add as reference to my project. Actually I can open generated rdlc in designer, at run time I get error. I could not make out where is the exact mistake out of three
    options flashed.
    The definition of this report is not valid or supported by this version of Reporting Services.
    The report definition may have been created with a later version of Reporting Services
    or contain content that is not well-formed or not valid based on Reporting Services schemas
    Details: Data at the root level is invalid
    My web config has following references
    <add assembly="Microsoft.ReportViewer.WebForms, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
    <add assembly="Microsoft.ReportViewer.Common, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
    May be I have to change these versions to 9 or 10.
    First I will try adding Microsoft.ReportViewer.ProcessingObjectModel.dll .
    Once thanks for your reply.
    Races

  • Request for the creation of a new Unemployment account for tax

    Hi Guys,
    This is a question with regard to US tax. We have received a request for the creation of a new Unemployment account for the payment of taxes. This is because the account assignment number has changed for a particular company code in Tennassee state. Please let me know where this change could be made in SAP.
    Thanks,
    Subbaiah

    Subbaiah,
    Table T5UTL is used for New Tax Company Codes. If this is a new legal entity, youu2019ll need to set up the Tax Company here. Youu2019ll also need to assign at least one Personnel Area to this new Tax Company. This must be established in order to update the next table shown below, but only if itu2019s a new legal entity. The user will know.
    Table T5UTH is for establishing the account number to be used in BSI. It must be established in order to update the next table shown below.
    Table T5UTI is for assigning account numbers by Tax Company Code. Youu2019ll need one for Tax Authority TN, Tax Type 10. The user will need to supply this information to you.
    Table BTXRATE will need to be updated with the Tax Company Code, year, and the State Unemployment Insurance rate & taxable wage amount.
    Once this is done, youu2019ll need to update BSI.
    If Tennessee is a new state, youu2019ll have work to do with the tax models.
    Regards,
    Howard

  • Give me some ideas for the project.

    Hi,folks
    I am not familiar with programming in web services. Now i have a project related to web services need to finish. I want to someone give me some ideas for the project. how can i implement the access control services. is there anyone can give me some related links for me to learn.
    Project Title: Implementing an access control service
    Project Description:
    Web services are emerging as a new approach to system construction and will make a major impact on the engineering of future business systems. They will allow a move from enterprise to inter-enterprise computing. However, with inter-enterprise computing, there are major problems with providing access to shared data, given that enterprises will not wish to share all data with partners.
    This project aims to investigate this problem by developing a prototype of an access control service that will help decide whether or not data access should be permitted. In essence, companies will outsource their access control to this service and so will not need to maintain their own access control lists for a potentially rapidly changing set of users.
    Suggested Platform: Windows or Linux
    Suggested Languages & Tools: Java

    Well, the approach I've come accross is a central server which is typically accessed indirectly from the web servers (e.g. through SOAP protocol or RMI).
    The remote server sends a user id and a password (or more likely a digest of the password), and receives a session token, basically just a random string of characters which is checked with the central server each time a secure transaction is attempted. The token will be stored in a session object, or perhaps directly in a cookie or in the URLs.
    Active session tokens are stored on the central server for comparison. This means the password doesn't have to be retained in the server.
    It's possible for the session token to be transfered if the user switches from one site to another on the same authentication server.
    Sun distributes one of these beasties, by the way, so you could take a look at their product specs.

  • I need driver for the HDR-SR5 for windows 7

    I need driver for the HDR-SR5 for windows 7

    I used the Vista driver on Win 7 preinstalled notebook and it did work.
    I have no idea what A200 notebook model you have but in my case the driver was called:
    Flash Media Driver 2.0.0.6
    This is a driver for your Bridge Media Slot. This slot lets you insert either a SD card, Memory Stick (Pro) or xD picture card.

  • I got the new iPhone5 back in Dec, I hooked it up to my computer for the 1st time this wk.  It deleted all new data added since Dec (notes,contacts,texts,pics, info in apps) and reverted back to all my old data.  How can I retrieve all the lost data??

    I got the new iPhone5 back in Dec, I hooked it up to my computer for the 1st time this wk.  It deleted all new data added since Dec (notes,contacts,texts,pics, info added to apps) and reverted back to all my old data (literally uploaded all of my old texts and 1400 old pics and deleted anything new).  How can I retrieve all the lost data?? Please help!!

    SkyDaughter29 wrote:
    My current situation: I have soooo many texts on my iphone and I haven't deleted many because I need the information contained in them for future reference and for legal purposes.  I would really like to find a means and way to save them other than on the phone itself. I've done searches for various apps yet I'm not finding what I think I would need.  It appears Apple does not sync the texts between the iphone and my MacBook Pro.
    Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
    http://www.ecamm.com/mac/phoneview/
    http://www.wideanglesoftware.com/touchcopy/index.php
    Best of luck.

  • There is already a transaction for the systems of this product version(MOPZ)

    Hello All,
    I am trying to configure maintenance optimizer in Solution Manager 7.0
    on Windows 2003 server and SQL 2005 server.
    I am configuring this for SAP CRM 2007 server.
    Created the server, database and system in SMSY
    Created Logical Component in TA code SMSY
    SM59 connection for SAP-OSS is OK.
    S-User is assigned to a User.
    Created a solution using TA code solution_manager.
    Defined the product version for the solution created in the TA code
    solution_manager.
    When creating a Maintenance Optimizer transaction, I select the
    product version and its logical component in the Plan Maintenance
    (Phase) and click on Continue to go to Select Files Phase, I get below
    warning:
    Information Procedure 8000000130 Saved
    Warning: Status was reset by system
    Warning: There is already a transaction for the systems of this
    product version
    I cannot get pass this phase.
    I have deleted and recreated the solution, carried out the same
    activity again but its giving the same Warning
    Warning: Status was reset by system
    Warning: There is already a transaction for the systems of this
    product version
    Any help will be appreciated???
    Regards,
    Satish.

    Hello Ragu,
    Thanks for your response.
    As of now, we do not have ChaRM in place. Secondly, we use a single customer number.
    I would like to let you know that in our landscape we have two CRM server, one ECC sever, one SOLMAN7.0 server.
    I tried to configure MOPZ for CRM, ECC, SOLMAN server to download the respective STACKS.
    I was successful in configuring CRM and SOLMAN.
    But  when I tried to configure in ECC, it failed due to RFC erros.
    So I deleted the transaction for the ECC system and deleted the system itself in Solution Manager.
    Reconfigured the Systems in "SMSY", RFC connections are correctly defined to configure MOPZ between SOLMAN7.0 and ECC6.0.
    When I start configuring the MOPZ, I cannot get pass the first phase and this is when I get an error: There is already a transaction for the systems of this product version.
    Please let me know if you need further information.
    Regards,
    Satish.

  • I would like to upgrade my OS to the latest version.  I now have 10.6.8 and my machine has 1Gb of memory.  Need 2Gb for the new OS.  Is is possible (and practical) to add memory to a machine that's five years old?

    I would like to upgrade my OS to the latest version.  I now have 10.6.8 and my machine has 1Gb of memory.  Need 2Gb for the new OS.  Is is possible (and practical) to add memory to a machine that's five years old?

    You can put two 2gb RAM sticks in your model 2,1 but it can only use 3,3gb. This is a hardware limitation and cannot be changed.
    http://en.wikipedia.org/wiki/3_GB_barrier
    http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-core-2-duo-3-g b-memory-limitation-details.html
    OWC tests have found that there is a slight speed increase with having two 2gb sticks in rather than one 1gb and one 2gb. Your model is in the gray lines at the bottom of the graph. http://eshop.macsales.com/shop/Memory_Benchmark/Apple_MacBook/
    You can buy Lion for $29 from the App Store witht a model 2,1 MacBook. Lion will require at least 2gb of RAM but really needs 4gb to run smoothly. As for programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
    Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
    Before Mac switched to Intel processors they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.
    These are good online stores for Mac compatible RAM
    OWC http://eshop.macsales.com/shop/memory/MacBook/DDR2/ - They offer Mac tested RAM at very good prices.
    Crucial Memory http://www.crucial.com/ - good place to buy RAM from all over the world. They also have an excellent memory selector that allows you to choose memory based on your computer's model
    Data Memory Systems http://www.datamemorysystems.com/apple-memory.asp - another good, cheap place to buying RAM if you live in the U.S.
    Here are instructions on replacing RAM in a MacBook with a removable battery. http://homeoffice.consumerelectronicsnet.com/articles/viewarticle.jsp?id=44404
    If you don’t have the tools to open up the MacBook OWC has a set for $5
    http://eshop.macsales.com/item/OWC/TOOLKITMHD/

  • TS3694 my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working.

    my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working.
    I am in the noerthern [parts of australia and accessing an apple store is not possiable for another month. this is my only soucrce or telecommunication. please help

    This is what it says about error 2006
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

  • To make different colours for the columns of ALV report in Grid display.

    Hai Friends,
                       I have created an ALV report in grid display method by using the call function reuse_alv_grid_display.
    I have obtained the report.In that report i want to change the colour of each column.Plz provide the answer with a sample program.
                    Thank u.

    hi i had a program  for the rows with diff colors....do the same thing for the columns..
    REPORT  zdemo_alvgrid                 .
    TABLES:     ekko.
    type-pools: slis.                                 "ALV Declarations
    *Data Declaration
    TYPES: BEGIN OF t_ekko,
      ebeln TYPE ekpo-ebeln,
      ebelp TYPE ekpo-ebelp,
      statu TYPE ekpo-statu,
      aedat TYPE ekpo-aedat,
      matnr TYPE ekpo-matnr,
      menge TYPE ekpo-menge,
      meins TYPE ekpo-meins,
      netpr TYPE ekpo-netpr,
      peinh TYPE ekpo-peinh,
      line_color(4) type c,     "Used to store row color attributes
    END OF t_ekko.
    DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
          wa_ekko TYPE t_ekko.
    *ALV data declarations
    data: fieldcatalog type slis_t_fieldcat_alv with header line,
          gd_tab_group type slis_t_sp_group_alv,
          gd_layout    type slis_layout_alv,
          gd_repid     like sy-repid.
    *Start-of-selection.
    START-OF-SELECTION.
    perform data_retrieval.
    perform build_fieldcatalog.
    perform build_layout.
    perform display_alv_report.
    *&      Form  BUILD_FIELDCATALOG
          Build Fieldcatalog for ALV Report
    form build_fieldcatalog.
      fieldcatalog-fieldname   = 'EBELN'.
      fieldcatalog-seltext_m   = 'Purchase Order'.
      fieldcatalog-col_pos     = 0.
      fieldcatalog-outputlen   = 10.
      fieldcatalog-emphasize   = 'X'.
      fieldcatalog-key         = 'X'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'EBELP'.
      fieldcatalog-seltext_m   = 'PO Item'.
      fieldcatalog-col_pos     = 1.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'STATU'.
      fieldcatalog-seltext_m   = 'Status'.
      fieldcatalog-col_pos     = 2.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'AEDAT'.
      fieldcatalog-seltext_m   = 'Item change date'.
      fieldcatalog-col_pos     = 3.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MATNR'.
      fieldcatalog-seltext_m   = 'Material Number'.
      fieldcatalog-col_pos     = 4.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MENGE'.
      fieldcatalog-seltext_m   = 'PO quantity'.
      fieldcatalog-col_pos     = 5.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MEINS'.
      fieldcatalog-seltext_m   = 'Order Unit'.
      fieldcatalog-col_pos     = 6.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'NETPR'.
      fieldcatalog-seltext_m   = 'Net Price'.
      fieldcatalog-col_pos     = 7.
      fieldcatalog-outputlen   = 15.
      fieldcatalog-datatype     = 'CURR'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'PEINH'.
      fieldcatalog-seltext_m   = 'Price Unit'.
      fieldcatalog-col_pos     = 8.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    endform.                    " BUILD_FIELDCATALOG
    *&      Form  BUILD_LAYOUT
          Build layout for ALV grid report
    form build_layout.
      gd_layout-no_input          = 'X'.
      gd_layout-colwidth_optimize = 'X'.
      gd_layout-totals_text       = 'Totals'(201).
    Set layout field for row attributes(i.e. color)
      gd_layout-info_fieldname =      'LINE_COLOR'.
    endform.                    " BUILD_LAYOUT
    *&      Form  DISPLAY_ALV_REPORT
          Display report using ALV grid
    form display_alv_report.
      gd_repid = sy-repid.
      call function 'REUSE_ALV_GRID_DISPLAY'
           exporting
                i_callback_program      = gd_repid
                is_layout               = gd_layout
                it_fieldcat             = fieldcatalog[]
                i_save                  = 'X'
           tables
                t_outtab                = it_ekko
           exceptions
                program_error           = 1
                others                  = 2.
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    endform.                    " DISPLAY_ALV_REPORT
    *&      Form  DATA_RETRIEVAL
          Retrieve data form EKPO table and populate itab it_ekko
    form data_retrieval.
    data: ld_color(1) type c.
    select ebeln ebelp statu aedat matnr menge meins netpr peinh
    up to 10 rows
      from ekpo
      into table it_ekko.
    *Populate field with color attributes
    loop at it_ekko into wa_ekko.
      ld_color = ld_color + 1.
    Only 7 colours so need to reset color value
      if ld_color = 8.
        ld_color = 1.
      endif.
      concatenate 'C' ld_color '10' into wa_ekko-line_color.
    wa_ekko-line_color = 'C410'.
      modify it_ekko from wa_ekko.
    endloop.
    endform.                    " DATA_RETRIEVAL
    regards,
    venkat

Maybe you are looking for

  • Why do I get an error when I try to configure a channel with the tktds7x4 driver?

    I use the TDS754D scope. My complete function call is: errStatus = tktds7x4_ConfigureChannel( ScopeHandle, "CH1", 5.0, 2.0, TKTDS7X4_VAL_DC, 1.0, VI_TRUE); When I step through it, I see that I get an error on the driver line viCheckParm(Ivi_SetAttrib

  • ITunes version 9 - store won't load properly =/

    I went on iTunes today & updated it to the 9.0 version (& I have noticed everyone seems to be having a problem with this new version lol) & now I cannot sign in to download any music off the itunes store. Whenever I try to either redeem a voucher or

  • Shared Photo Stream in Finder

    Good day anyone, I just restored my MacBook and I would like to have my Shared Photostream at my disposal at the sidebar in the Finder. I have seen several tutorials on how to do this with your regular Photostream, however. One of these steps was tha

  • Aperture on 20" Intel iMac

    I just ordered a 20 inch iMac with two Gigs of ram and 256 Megs of video ram. How will Aperture run on this machine? Also my workflow includes converting all my various Raw files to DNG. Will Aperture open and treat these files just as any Raw file?

  • FZ312

    Dear Consultants, When running F110 I get in the log: "Posting for account type D should be carried out with posting key" Message no. FZ312 Thank you very much.