Needed info about io devices and cpu without using prtdiag

Hi
I need to collect info about io devices and cpu. but i cannot use prtdiag.
is there any way to collect this information on solaris machine....
may any available c APIs
Thanks in advance.
Nagesh

yep.... prtconf -vp | grep <wot u r looking 4>

Similar Messages

Need info about Serena Collage and Netweaver 04 WEBAS

Is anyone using SERENA Collage with Netweaver Web Application server? I have some deployment questions. Any assistance is appreciated.

Hi Ravikumar
you can check the following whitepaper
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/eac9cf35-0801-0010-918b-ab231eba0bd0
and the verify the following
http://help.sap.com/saphelp_nwce10/helpdata/en/45/51b5d88a853bdce10000000a1553f7/content.htm
if it helpful reward points are appreciated

Need info about HDD adaptor and Vista utilities installation on Equium A110

I own an Equium A110-233 (PSAB2E), and I recently upgraded to Vista after installing 2GB of RAM. However, I found myself a little short of hard drive space and treated myself to a new 120GB HDD. However, it seems that the computer has an edge connector interface, as does the existing Hitachi TravelStar HDD - it doesn't look like there's an adaptor plug on the drive. Does anyone know where I can get an adaptor for my "traditional" 40-pin hard drive?
After installing Vista and reflashing my BIOS, I reiinstalled ConfigFree and the Value Added Package (amongst other drivers). However, running ConfigFree always leads to a crash with the BSOD ID "NO_MORE_IRC_STACK_LOCATIONS".
As for the VAP, I wanted it mainly for Power Saver. However, searching for it gives only "Power Saver Help".
Can anyone give me any pointers here? Thanks.

Hi,
did you know that you have a serial-ata drive in your machine which is not compatible to the IDE standard (40 pin)? You wont get an adaptor from 40 pin to serial ATA, because SATA is a completely different technology to IDE.
You will have to return the harddrive you purchased and buy a serial-ata drive, which will fit in your machine.
A little idea from my side regarding your BSOD:
Download the powersaver and the configfree for vista from the internet (this is a good address: http://209.167.114.38/support/Download/ln_byModel.asp) and reistall that stuff, maybe it helps.
Greets

HT4623 I cannot install my ipod to my computer. Says something about the device driver. I did not get it new either and so have no info about it. And I have never used one before and have no friends who have either. Can someone help me?

I cannot install my ipod to my computer. Says something about the device driver. I did not get it new either and so have no info about it. And I have never used one before and have no friends who have either. Can someone help me?

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Need Info about BW CRM Analytics

Hi all,
Guys,
Please help me out...
I need Info about BW with CRM Analytics
What are the core areas where data's are extracted for CRM to BW
What will be the Interview question related to BW CRM Analytics
If possible if u have any docs kindly email me at [email protected]
Thanks in Advance.
Jaffer Ali.S

Dear Jaffer Ali S.,
The following types of analyses can be carried out:
CRM Lead Analysis
Use the InfoCube CRM Lead Management (Technical Name: 0MKTG_C01) for reporting.
The Lead Management InfoCube contains all the characteristics and data used for the administration of leads. This InfoCube enables you to execute the following standard queries available in SAP BW:
Channel Analysis
Efficiency Reporting
Historical Evaluation
Lost Leads
Channel Management: Top-n Lost Leads (Current Year)
CRM Activities Analysis
Use the InfoCube CRM Activities (Technical Name 0CSAL_C01) for reporting.
The InfoCube for activities in CRM provides the data basis for evaluating business activities undertaken by your employees. It provides you with information about how much time is being spent on contacting the customer, whether customers actively seek out contact with your company and how intensively your employees look after your customers. It delivers data for queries such as:
Intensity of customer care
Activity History
Success/failure analysis
Customer Interaction Center (CIC)
Activate the InfoCube Interactive Scripting Evaluation (IC WinClient) 0CRM_CIC1.
Interactive Scripting Evaluation (IC WinClient)
This InfoCube provides the data base for the interactive scripting evaluation. It supplies the data to the Interaction Center (IC): Interactive Scripting Evaluation query.
Opportunities Analysis
Activate InfoCube 0CRM_C04 - Opportunities.
The CRM Opportunities InfoCube contains all the characteristics and data used for the opportunities analyses.
Sales Order Complaints Analysis
Activate InfoCube Complaints (Technical name: 0CSAL_C09).
You can carry out the complaint analysis on a daily, monthly, weekly or a quarterly basis. The analysis can be done in relation to CRM Service Organization, CRM Sales Organization, CRM Product, and Sold-To Party.
Service Qualtiy Analysis
Activate the MultiProvider 0CSRVMC04 - CRM Service - Orders and Confirmations with Complaints.
The MultiProvider 0CSRVMC04 - CRM Service - Orders and Confirmations with Complaints gets the data from the following ODS objects for analyses in various queries:
0CRM_PROI - Orders: Item Data
0CRM_COI - Controlling (Item Data)
0CRM_CNFI - Confirmations (Item Data)
0CRM_COMP - CRM Complaints (Items)
Let me know if you need further help.
Reward points if it helps.
Regards,
Naveen.

I need info about CL_XML_DOCUMENT

Hi to all,
I need info about the class CL_XML_DOCUMENT and his methods.
I only have seen information of a few methods.
Where can I find more information and examples of use about this class?

Hi,
This question is already answered before in this forum, check out the below link -
Information about CL_XML_DOCUMENT
Hope this helps.

I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

Thanks for that. He is one of the last holdouts in IT so an email address for him would just mean I have 2 to check so that is what I am trying to avoid as we move into retirement:)

HT6114 hello .. i am using mavericks OS and it is showing it needs updates about 800 meg. and every time i download that it dosent do anything and again it is beginig to download again and again that.. please help me. the update is 10.9.2

hello .. i am using mavericks OS and it is showing it needs updates about 800 meg. and every time i download that it dosent do anything and again it is beginig to download again and again that.. please help me. the update is 10.9.2

To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

HT1689 I have given my iPad and iPhone to my wife, she has synchronized with her Apple ID but it keeps going back to my Apple ID when she tries to purchase something in iTunes. Do I need to deregister the device and register it in her Apple ID?

I have given my iPad and iPhone to my wife, she has synchronized with her Apple ID but it keeps going back to my Apple ID when she tries to purchase something in iTunes. Do I need to deregister the device and register it in her Apple ID?

What id shows at the bottom of the Featured tabs in the App Store apps on the two devices ? If they still show your account id then try tapping on the id and log out of it and your wife can then try logging in with her account.
Any content that is already on them that was downloaded by your account will remain tied to your account, so only your account will be able to download updates to your apps.

Use HCM processes and Forms without using the Enterprise Portal

is it possible to leverage existing HR Admin Services (HCM processes and Forms) functionality without using the Enterprise Portal?
1) Create an Adobe form and Interface using SFP
2) Set up ISR and Form Scenario
3) Set up Forms configuration to use existing Backend and generic Services
4) Set up workflow to updated Backend using Services
is it possible to do the above steps and not use the Portal? If Yes, how do we present the forms to the Manager, and provide different buttons that appears on the Portal by default?
Any ideas will be greatly appreciated.
Thanks,
Saurabh

Hi Saurabh,
your assumptions and findings (items can not be started from the backend workflow inbox etc.) are correct: These processes can not be started without the Portal and it is not intended to do this.
The above mentioned backend report are only forseen for implementation and testing purposes and not for productive use.
In addition to the fact, that you already can't execute the work items a lot of other features of the framework (Process Browser etc.) are only available through the Portal.
Best Regards
Michael Bonrat - Solution Manager HCM Processes and Forms
Info about HCM Processes and Forms:
www.service.sap.com/erp:
- SAP ERP Human Capital Management -> Workforce Process Management -> HCM Processes and Forms

Connect as sysdba between Linux and Windows without using password

hello
Hello
I need to connect as sysdba between Linux and Windows without using password for the sys user
Sqlplus /@string_connection
Plz help me

Duplicate post:
Connect as sysdba between Windows and Linux
Actually you have been given the answer in your above thread. You need to read the Oracle documentation. Search password file at tahiti.oracle.com
regards

What is the best way to open emails and attachments without using wifi?

For I-phone and I-pad, what is the best way to open emails and attachments without using wifi? I turned off wifi in my settings but my boss thinks there may be another way and a better way to use something else instead of wifi. Any help would be appreciated! Thank you!

Thanks! That is a very good question you post. My boss asked me that and I am assuming that he is having issues with using wifi wherever he is at. My boss is the kind of person that when he asks something you look into it and ask him no questions...he's the only one asking questions! But thank you for your response I will tell him the information you told me and hopefully that will help!

In the icloud settings, i am told i need to accept the terms and conditions to use icloud, but when i try to do so, i get a message "unable to connect to server". This has been going on for a week. There is no problem with either my wifi or cellular conne

In the icloud settings, I am told I need to accept the terms and conditions to use icloud. However, when I click on "Terms and conditions", I get a message "unable to connect to server". This has been happening for a week now since I upgraded to iOS 7.06. There is no problem with my wifi or cellular connectivity, all other applications work perfectly. P.S.I have never used icloud before, but wish to do so now. How do I overcome this problem?

Have you turned the iPad off then back on? That often helps with problems.

Tell me about PCH , PAP and PNPCE database using in HR reports

Hi SAP-HR Experts .
May anybody tell me about PCH , PAP and PNPCE database using in HR reports .
Does anybody have any ABAP report code about using thses LDB's .
I always used PNP database in my reports , i never come across in which i should use PCH , PAP and PNPCE database .
may some body tell me the practical use these LDB's .
My Best Regards to ALL : Rajneesh .

     minimize the amount of programming required, it often makes sense to use logical databases when generating reports. Reports are special programs that provide selection screens and access databases. The logical database PNP consists of the database driver SAPDBPNP and is activated using the report attributes. It fulfils three main functions:
     Data retrieval:
HR data is written for each employee to the main memory, where it can be processed.
     Screening: A selection screen enables you to select employees in accordance with organizational criteria. For example, you can select all of the hourly wage earners of a particular personnel subarea.
     Authorization check: The implicit authorization check is another advantage of the logical database. Personnel data is frequently confidential and it does not make sense to allow all programs carry out the authorization check.

How do you swap two variables A and B without using a 3rd variable? No fun

How do you swap two variables A and B without using a 3rd variable? No function or method allowed.
For example:
Given:
A = 35
B = 10
Result
A = 10
B = 35

How do you swap two variables A and B without using a
3rd variable? No function or method allowed.
For example:
Given:
A = 35
B = 10
Result
A = 10
B = 35
A = A + B (A = 35 + 10 = 45)
B = A - B (B = 45 - 10 = 35)
A = A - B (A = 45 - 35 = 10)

Needed info about io devices and cpu without using prtdiag

Similar Messages

Maybe you are looking for