Negaive asset value in AS91

Hi ,
Could any one expalin me how to make subsequent postings if we maintain negative asset values in AS91?
How to do write up postings? What should be the transaction type for write up? Please share your valuable knowledge.
Thanks in advance.
Smruti.
Edited by: Smruti Mohanty on May 4, 2009 10:05 AM
Edited by: Smruti Mohanty on May 4, 2009 10:06 AM
Edited by: Smruti Mohanty on May 4, 2009 10:07 AM

Thanks for your instant reply.
Our client has done a wrong posting of write-up in 2008. We have to reverse that entry. Now 2008 is closed. And we already run depreciation for 2009.
Now how we will reverse the entry of write-up for 2008. As it is affecting net book value. As this asset is with negative values. Client wanted increase the net book value of that asset. So they did write-up but instead of increasing the net book value it decreases as the asset was with negative values.
So how do we reverse the write-up entry for 2008 which is closed now?
Please give your valuable suggestion.

Similar Messages

  • Which table contains net book value for Assets created with AS91.

    Which table contains net book value for Assets created with AS91.
    I have a problem locating where the net book value is stored in SAP.  Is it simply calculated and not stored in any one place?  I am trying to predict how SAP will calculate the net book value for some assets we plan on converting, but my formula doesn't always work consistently and I have not idea what is going on.  If it is stored in a table some place, can anyone please let me know!
    Thank you all

    Hi anar.samadzade & Michael Stewart
    It is not possible to directly get net book value of an any Table. You must migrate the gross book value (acquisition cost) and the accumulated depreciation. SAP will then calculate the NBV.
    Gross Block & Accumulate Dep you will get from Table: ANLC
    http://fixedassetsaccounting.net/migrating-fixed-assets-into-sap-a-harlex-guide/
    Dear anar.samadzade Ask Questions politely
    Regards
    Viswa

  • Asset issue in as91

    Dear Sapgurus,
    while uploading the asset masters through as91 system it is showing error message
    30 Consolidated balance sheet in local currency
    Line item causes scrap value of 0,00 to be violated
    Message no. AA632
    Asset affected: INTERN-00001-0000
    Diagnosis
    The book value of the asset is below the the cut-off value in the amount of 0,00.
    Procedure
    Check your entries for the amount, transaction type and cut-off value specifications, such as memo value, scrap value or cut-off value percentage rate.
    Reg
    SATYA
    Double-post under different name

    dear Freind,
    the feild "ANLB-LGJAN" represent Last fiscal year for the annual values in Asset Acct. so try giving 2009 there instead when you are uploading that data.
    Best Regards

  • Asset Value Date - Wrong posting

    Dear All,
    Company code is on live, Assets legacy data taken as on 31st-March-09.
    Later we find that some of the assets [new purchases, in previous fiscal year (2008)] was not posted.
    For that recently we posted that transactions F-90 using posting date is current date and document date is Actual acquisition date.
    Due to document date in previous fiscal year system taten posting date as asset value date.   So, depreciation posting missing for previous year.
    I need your help.  How can I rectify this???
    Other than reversing the existing posting, what is the scenario????????
    Thanx
    Regards
    partha

    Hi,
    In order to post ,post capitalization please closed the previous asset accounting year.In ABNAN T.Code screen please update the original val date field with the date  of the previous year from where you need to start calculating the dep. Doc date and posting date should be of the current FY.Also check T.Code Ao90 for updating the field Revenue from post capitalization with proper GL Account.
    If your statutory audit for 2008-09 is not yet completed then you can think about T.Code AS91.While  using T.Code ABNAN the following line items are generated.
    Asset        dr
    Acc Dep         cr
    Rev form post capitalization cr
    The system will only calculate dep of previous year.For the current year dep which are yet to be posted will be posted in the next schedule dep posting run.
    Thanks
    Monoj

  • Asset values cannot be displayed due to missing text

    Hi guru's,
        I am facing the problem while i am displaying the asset values,i am able to create asset through as91 but when i go for awo1n system showing error" Asset values cannot be displayed due to missing"
    help would be appreciated.
    Thanks
    Ravi

    Hi Vyas,
       I am getting error like below.
    Asset values cannot be displayed due to missing texts
    Message no. AY363
    Diagnosis
    The values of the selected asset cannot be displayed. Text elements are missing in logon language EN.
    System response
    Processing is terminated.
    Procedure
    First, check if you are logged on in a language that is maintained for this system.
    This error can also occur, if the company code of the selected asset is assigned to a chart of depreciation that is not fully maintained.
    In many cases, the problem can be corrected by re-importing the missing texts from the reference chart of depreciation. You can do this using repair program RACORR14. Refer to SAP note 0773639 for more information.
    Thanks
    Ravi

  • AUC legacy assets uploading through AS91 transaction code with TT- 900

    Hi,
    I am uploading the AUC Legacy assets through AS91 transaction code.
    In AS91 - I need to select Transactions option & should enter the transaction type 900 to give the Legacy AUC valules.
    When i give the Transactioon type 900 for AUC assets load in AS91, the system is giving the Asset Value Data as 01/04/2009.
    But the Asset Data takeover date given in the system was 31/03/2009. But why the system is taking 01/04/2009 (This is Fiscal year starting date for Country India).
    #Now my problem is i should get the *Asset value Date -31/03/2009 but not 01/04/2009.
    Kindly advise me how to change this asset value date to 31/03/2009 from 01/04/2009? It would be a great help for me if any one can help me or provide me some inputs...
    Thanks
    Kishore

    Hi Zubin,
    Thanks for your reply.
    1. we are using V3 fiscal year variant (March-April)
    2. In the Path given by you - I have maintained March -31,2009 for transfer date. In this case system is taking the 1st' April,2009 (This is next financial year first date)
    3. But I should get the same date as transfer date (31st march,2009). I dont want next fiscal year first date as AUC asset value date.
    4.how can i change this value date?
    Thanks
    Kishore

  • Asset value reduction without posting to accounts

    Hi,
    I am facing one problem. I am having asset worth 100000 now I want to reduce it to 0. The asset value change should be made in asset accounting only and it should not have entry in GL. The value for this asset is zero in GL account. Please suggest how can I post only in Asset.
    Points can be awarded.
    Thanks
    Veena

    Hi Rajib,
    It is possible to let created the posting in FI an created a manual reversing with OASV and ABF1.
    But when you retire later the asset you have to make a correction again with OASV or ABF1 (who knows then!!).
    BUT YOUR SUBLEDGER IS NO LONGER IN LINE WITH YOUR G/l ACCOUNTS.
    I think you use these transaction only with conversion (AS91) and take them then out of the authorization.
    When you start with manual posting then you have differences between AA and FI. Over some years the tax office have a look to your books and then you have to explain the differences.  Then you can spend some weeks to found the differences.

  • Asset values as of a particular date.

    Is there a function module from which we can get the Asset values as on a particular date ?

    Use Transaction Code AR01, & give what ever date you want.
    I think system will give .
    Regards
    Prasad

  • Error in Asset Value carry forward to next year

    As a regular periodic process of Month/Year closing activities in SAP, Asset Year 2015 was opened and then closes the year 2014 and carried forward the Asset values to the year 2015. But unfortunately some of the Asset value had not been transferred to the year 2015. As a result, Depreciation had not been charged for those Asset for the year 2015. Need to transfer the Asset value to the current year immediately. Can any one help me regarding the problem ? The APC Start value is showing in the year 2014 but its not showing in 2015.
    The Closing value of Current APC of year 2014 does not match with the Opening value of the APC Start, so what should be the possible reasons for that ?

    Hi Erika,
    I did that on last January 2015. First i use the T-code: AJRW for the Fiscal Year Change and then T-code: AJAB - for Year end-closing Asset Accounting as i did that for last 4 years. Though there was as error message indicating error in depreciation calculation, our consultant assured me that that will not create any problem. The Error was like below:
    600981       0    Secretariat Table                              2014 Error in dep. calculation

  • Need a help to write up the asset value(Land) which is not depreciated

    Hi Experts,
    My client want to write up the asset values(Land value) from 500000 to 750000. But this asset is not having any accumulated dep.
    to write up the vlaues.
    please could some one suggest how can we write up the values which are not having the accumulated dep.
    i tried through tcode ABZU but i am getting the below error.
    You cannot post write-ups
    Message no. AA402
    Diagnosis
    None of the areas to be posted in accordance with the transaction type entered manages one of the depreciation types entered or cumulative values.
    Procedure
    Check the transaction type.
    please could some one help on this.
    Thanks in advance.
    Regards,
    Venkat

    Hi Paul,
    Thanks for your valuable inputs.
    As per second option my client is not configured the Revaluation of assests, hence this is not applicable.
    Then as per your first option we can go ahed on this.
    Please could you suggest me which t code is most suitable for the manual posting.
    Thanks & Regards,
    Venkat

  • What is setting for the depreciation calculate on the basis of assets value date

    Hi ,
    My client requirement to calculate the assets depreciation on the basis of assets value date,
    every assets transaction will have take base assets value date
    Acquision   1  Assets value date 1.4.2014
    transfer Assets value date 15.3.2014
    Wbs settlement  Assets value date 20 .3.2014
    second acquisition Assets value date 28.03.2014
    if anybody know about the setting ,Please provide me important setting ,

    Any setting related to assets posting variant ? to calculate if anybody know the setting please inform.

  • Problem in Asset value calculation ... ANEP and ANLC

    Hellö ,
    We have a problem in calculation of the Fixed Asset values. Please see the link below for the problem. Technically it sums up like transaction values are available in the table ANEP but ANLC table is with the wrong value, Some of the transactions are not reflecting in the calculations of planned values for some of the Assets.
    http://docs.google.com/View?id=ddqnbgm8_49cmgq86gx
    We develop and implemented a functionality with the next
    characteristics:
    a. When we ran the MIRO transaction to a fixed asset situation, a
    substitution in accounting documents (using a user-exit ) determines
    the profit center to the fixed asset and insert the line
    item in a custom table.
    b. The custom program identifies all pending line items for processing
    (via custom table) and, for each fixed asset identified, reverse the
    original accounting document, and post the fixed asset in the profit
    center '04219CL000'. To do this movement between the profit
    center '04106CL000' and '04219CL000' the custom program uses a zero
    balance account.
    c. First of all, the custom program set the Field <negative values>
    (BAPI1022_DEP_AREAS- NEG_VALUES) using the function
    BAPI_FIXEDASSET_CHANGE. Later the custom program post the accounting
    document using the function BAPI_ACC_GL_POSTING_POST;
    d. In less than 1% of the cases the fixed asset posted in this process
    it seems with a problem: the asset line itens (transactions  - ANEP
    table) where correct posted but the fixed asset acquisition values
    (ANLC table) where posted in a wrong way (it's initialized - without
    any value sometime or not summing up some transaction values properly).
    e. Our custom program does not update any field value on the asset.
    All the modifications on the asset are being made by the standard
    functions above.
    Edited by: Ravi Sharma on Jun 17, 2009 9:16 AM

    Hi,
    the problem is: Does anybody give you the correct value for each part?
    If you know the value for each part you can use transaction ABUMN to transfer values from one asset to a new asset. With this transaction you can create a new asset. And you can make a partial transfer.
    If you use this transaction you can simulate before you transfer it.
    But as I said the problem is to find out the correct value. In germany for example we have to activate all in one fixed asset (computer with cbu )
    Hope this answer your question.
    Best regards
    Volker

  • Asset Value Date determination during settlement from Orders or WBS!

    Hi,
    I have a scenario on the asset value date and I am not sure what went wrong, asset side or CO side.
    The scenario is as following:
    1. Asset was converted into the system by 7/31/2008 with $10000.
    2. The capitalized on date is 2/29/2008 on the asset master data.
    3. On 8/31/ 2008, I charged $300 to an internal order and settled the $300 to this asset. The Asset Value Date on the Asset Explorer is 8/15/2008.
    4. On 9/30/2008, I charged #500 to the same internal order and settled the $500 to this asset, the Asset value date on the asset explorer for this charge is still 8/15/2008.
    This messed up the depreciation of this asset. Does anyone know how to control the asset value date from the settlement? Do we need to config in Asset side or in Order side? I want the $300 charge's value date is on 8/15/2008 and $500 value date on 9/15/2008. Is this possible?
    Thanks,
    Ting

    In the settlement you can fill in the asset values date.
    The first posting is the basis for capitalization date(when you don't fill it in manual), when you fill it in for the second time the Asset Value Date it is no longer relefant.
    This is only important when you have say in your depreciation key that the depreciation is based on days( see the help on this field)

  • Asset Acquisition with Asset Value Date earlier than GI post.date

    Dear all,
    I am curently using SAP ECC 6.0. We are not creating AuC assets but directly capitalizing assets from investment accounts.
    If a material is issued with a date in March and i try to acquire it with asset value date from a previous period, for example in February, the system doesnt issue any message and lets me post the transaction. The accountants claim that this hadnt been possible in the earlier version of SAP 4.6 that we had been using and that the system had issued an error message - "Posting not possible (Value date earlier than capitalization date)"
    The accounting logic is that you cant capitalize an asset with a date earlier than the date when it has been in use, i.e. in our case it`s the date the material has been issued from the warehouse.
    Does someone know what logic does SAP follow in this case - and if i can set a validation control that will check and compare the two dates?
    Any opinion would be appreciated
    KR
    Severina Koleva

    We are on ECC 5.0 and we do get that message, but it is a warning.
    AA348...
    that said, you can setup a validation using GGB0 and asset accounting

  • Asset value date

    Hi Guru's
    I have uploaded asset with  capitalization date is 02.07.2008 the i have uploade the data with the posting date 02.10.2008, the depreciation is calculated from the period 02.10.2008 and not fromt the capitalized date
    can one let me know please?the depreciation calculate from teh date of acuisition or from teh date of posting date?
    regards
    Sunitha
    Edited by: sunitha reddy on Mar 3, 2009 4:26 PM

    hi thanks to all.
    my situatui is littlebit different. normally capitalization date will take with end date of  the asset. in my case asset value date, capitalization date and aquisition date and dep start date also same.but as per these date when we compared with end date the asset useful life should be 10.3 yeaes but i has calculated as 10.1 from the posting date of the document
    now i want change teh asset useful life for 10.3 year in master data, how can i change it in mass? and what are the implications?
    thanks
    sunihta

Maybe you are looking for