Nested Tables - Unable to make Table Header row to repeat in subsequent pages

Hi,
I am unable to make the header row to repeat in subsequent pages for nested tables.
Can anyone reply with a sample form to illustrate a similar scenario?
Thanks,
Rohit

Hi All,
I have selected the the check box Insert Header Row in Subsequent Pages then also the header is not getting flowed in subsequent pages only till 2nd page its getting flowed.
I have used table wizard to create table and i have made the table subform as flowed then also table header is not repeating in subsequent pages.
MainForm (Flowed)
TableSubform1(Flowed)
Table1
HeaderRow
Row1
TableSubform2(Flowed)
Table2
HeaderRow
Row1
I selected TableSubform1 and in Pagination tab OverFlow Leader dropdown i selected HeaderRow, the same i did for TableSubform2 also but the table header is not getting repeated in subsequent pages.
Please help me in solving this problem.
Regards,
Bala Baskaran.S

Similar Messages

Table Header not getting repeated in subsequent pages

Hi,
I have a table and i want to table header to be repeated in subsequent pages but only till 2nd page the table header is repeated from the 3rd page onwards the table header is not repeated.
I have selected the Header Row in hierarchy and in Pagination tab for the header row i have checked the the check box Insert Header Row in Subsequent Pages.
After selecting the checkbox also table header is repeated only in 2 pages and not repeated after the second page.
My table hierarchy in form is :
TableSubform
---Table
HeaderRow
Row1
I am using Designer 8.0 and Acrobat Reader 8.1.2
Can you please help me in solving this issue.
Regards,
Bala Baskaran.s

Hi All,
I have selected the the check box Insert Header Row in Subsequent Pages then also the header is not getting flowed in subsequent pages only till 2nd page its getting flowed.
I have used table wizard to create table and i have made the table subform as flowed then also table header is not repeating in subsequent pages.
MainForm (Flowed)
TableSubform1(Flowed)
Table1
HeaderRow
Row1
TableSubform2(Flowed)
Table2
HeaderRow
Row1
I selected TableSubform1 and in Pagination tab OverFlow Leader dropdown i selected HeaderRow, the same i did for TableSubform2 also but the table header is not getting repeated in subsequent pages.
Please help me in solving this problem.
Regards,
Bala Baskaran.S

Changes to table header row that repeat in several pages

Hello.
I have a table that expands over several pages, with a header row that repeats in all of them.
I want to hide some of the header row's columns by code.
When I change the header row, it changes only for the first occurence of the header row, and not for other occurences.
I tried to do somthing like that:
for (i = 0; i < Table1.nodes.length; i++)
if (Table1.nodes.item(i).name == "HeaderRow")
// ..hide the column..
But it only entered the loop once, and only changed it for the first row.
I also tried to look at Table1.HeaderRow.instanceManager.count, but again, it has the value of 1, so I can't access
Table1.HeaderRow<i>
or somthing like that.
So how can it be done?
Best regards,
Udi Dekel.
Edited by: Udi Dekel on Jul 30, 2008 9:24 AM

Hi Rahul,<o:p></o:p>
I have tried using multiple formats of images (.jpg & .png) for the problem and have been able to successfully achieve the desired result as per design.<o:p></o:p>
To further verify the issue that is happening on your system we need to do some extensive troubleshooting to isolate the issue. This would require you to open a ticket with Microsoft.<o:p></o:p>
Following is the link along with the number for Microsoft which would help you to open a ticket with us – <o:p></o:p>
http://support.microsoft.com/OAS<o:p></o:p>
1800 MICROSOFT
Thanks & Regards,
Vinayak Shetty

Repeating Header Rows - Not repeating beyond page 2

Hello,
I'm at my wit's end and I have yet to see a response to questions related to repeating headers (though I've seen it in a few forums).
I have a flowed form with an initial header table and then 4 subforms, each made up of tables with a header group of two rows and then a user-modified number of data rows. Each of the subforms has it's own 2 line header, which includes a static "topic" row (with "add/delete row" button) and then a second header row with the column titles (9 columns across). As I said, these two header rows are grouped together.
Each of the 4 subforms can (and does) flow on to multiple pages once filled in by the users. At first, my issue was getting the two rows (grouped) that make up my header to repeat on subsequent pages for each subform. No go - apparently grouped header rows can't make up an overflow leader (I can only choose one of the two), and when I check the box to make the GROUP appear on subsequent pages under pagination, it will only appear on page 1 and 2 for that particular subform...so I've given up on that. Now I just want the second header row (with the column titles) to appear on every page that each subform overflows on to, but I can still only get it to appear TWICE. Anytime a subform moves onto a third page, requiring a third instance of the header, it doesn't work.
I came across one solution involving the "repeat header for each row", but that came with a host of new bugs, including a bug where every time I open, edit data in a particular subform and save the file, a NEW header group row is added to that subform (after 12 opens, there is literally 12 header rows at the top of each of my 4 subforms if I edit data in all 4)...though it solves the other issue and the header rows DO appear properly on subsequent pages beyond page 2!!!!
Any solutions? I've run into this on three separate occasions over the past year when building forms and every time, I've hit this wall, given up the search for a solution and sacrificed aesthetics and functionality in my forms that I shouldn't really have to.
Ck.

Here is a sample I did for you..
https://acrobat.com/#d=BSeyeLhbaeyqXfwX*wrwzA
The difference with this file, is I created a table and then in the top row I merged all cells. Then created a table with two rows inside this merged cell.
In the Header row properties I checked, repeat header in Subsequent pages.
Let me know if you have any issues..
Thanks
Srini

SSRS Table/Row Header does not repeat on every page when exported to PDF

Hi, I have a SSRS Report in which the rows are grouped and the Tablix has a Table/Row header. I wanted the header to repeat on every page for a group because sometimes the data from the group would be more than one page.
                               To achieve this
                              - I went to Advance mode by clicking the arrow next to column group
                              - Selected the Header Static column from Row Group
                              - Changed the following properties
                              - KeepWithGroup: After
                              - RepeatOnNewPage:
True
                              - The header columns
are set to not grow.
The problem only occurs when the nested grouped data in one of the columns goes over a page. The following pages don't have any header.
So half of the time the header row repeats but when the nested grouped data extends over one page the header does not show. Problem only occurs when rendered to pdf.
I found this line "Headings are repeated on each page only if there is sufficient room" in SQL 2008 version. But I could not find it in later versions of sql server. So does that mean it is fixed

Hi Mumblesnz1,
According to your description, you specify value of RepeatOnNewPage as True in the report. When exporting the report to PDF, one grouped data extend over one page, and tablix header display on first page, not repeat on following pages.
As we tested in our environment(SQL Server 2008(SP3)-10.0.5520.0(X64)), it works as you required. We set KeepWithGroup as After and RepeatOnNewPage as True. After exporting to PDF, the grouped data display on two pages, and tablix header repeats on each
page. Since we haven’t found any document mentioned this issue is fixed on which version, I suggest you try to install the service pack 3 for sql server 2008.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

How to get header row to flow to next page with table content?

I am setting up a dynamic form with a series of question/answer tables.
Example:
Header (Text): List your accomplishments for the year.
Row 1 (Text Field): Associate types their response to the question above.
If I type enough text in the response that it flows down to a second page, both the header AND the response box drop down to the second page....ultimately leaving a big white space on Page 1. I would like for the header to flow to the next page, but only with the 'extra' text that didn't fit on page 1...not ALL of the text.
Is this possible?

I am doing exactly that. My issues is that, VO attribute is passed correct for the table rows which are fetched from the database. For the table rows which got created through 'Add Another button', the VO attribute passed through URI as {@FdTaskId} is returning null. The VO attribute sets only when a form submit happens. For example, after adding a row through 'Add another row' button, click the same button again to add one more row and now go back to previously added row and now you can see that its VO attribute is set ({@FdTaskId} carries value )

Issue: Saving dynamic form as reader extended (to allow saving) causes certain header rows to repeat

I use LiveCycle to create electronic forms/worksheets for the group I support at work. I've had two worksheets have this issue recently. One I was able to fix by going to my previous version, re-editing, and re-saving. The other continues to be a problem. The worksheet is dynamic, and has several add row features. The form continues to work fine, but the header rows in certain tables repeat when saved as a reader extended file which allows my users to save the form (required for our work). I've completely re-done the worksheet from scratch, as well as re-editing from previous versions with no luck. The best I can do is get repeats to change header rows.
This is the dynamic file prior to saving as a reader extended document:
And after:
Any suggestions on how to fix this issue? I can't spend hours re-creating the entire document if its just going to happen again...
Thanks.

The entire worksheet was created in Design View - so all the script written was done automatically by LiveCycle - The tables all exist with a single row to start, and rows have the ability to be added dynamically. As far as the scripts referencing header rows, I do notice that the header rows in each table are all named the same ("header row") in the script - could this have caused a glitch? In the hierarchy chart, they are separated out by a bracketed number, so it seems to realize they are separate. But let me try renaming each one separately...
Well that worked! Its the first time I've been able to Extend the document without extra rows on this version of the worksheet! So all I did for future users, was to make sure each Header Row was specifically named differently - so HeaderRow1, HeaderRow2, etc.
Thank you so much!

AddAnotherRow of Advanced Table, does not make the new row as current row

Hi OAF Gurus,
Requirement:
When user presses 'AddAnotherRow' button on OAAvancedTable, the new row that gets added should become the current row of the underlying VO of the table.
What’s happening:
When user presses 'AddAnotherRow' button on OAAvancedTable, the new row is not the current Row(VO’s previous current row retains its current status)
What I tried by far
APPROACH #1 - when create row
In VORowImpl - override create and set this new row as current
public void create(AttributeList attributeList)
try
super.create(attributeList);
// PSUDO CODE
am = this.getApplicationModule
vo = am.findViewObject("OAAdvancedTableVO1");
vo.setCurrentRow(this) // this should set the new row to current.
But VO's current row is still the old current row and not this new row.
APPROACH #2 - when insert Row
I thought that AddAnotherRow , internally must be doing a create() then an insert() row on the VO, so i overridden the insertRow(row) of the VO
public void insertRow(Row row)
super.insertRow(row);
this.setCurrentRow(row)
System.out.println("COMMENT insert called .............................................");
But this method is never called by the framework.
***Please help me make the newly created row on the OAAdvancedTable using 'AddAnotherRow' (out of the Box) , as the currentRow of the underlying VO***
Thanks
Chaitanya

Thanks a lot Chris.
I have used your code and it works perfect.
Now I am not using the out-of-the-box AddAnotherRow, as it does not make the newly added Row as 'currentRow' of the VO
I have used the following code by Chris and it solves the issue.
1. Determine the number of already displayed rows on the table
OAAdvancedTableBean tableBean = (OAAdvancedTableBean) webBean.findChildRecursive(tableID);
int rowsDisplayed = tableBean.getNumberOfRowsDisplayed();
replace tableID with the actual value.
2. I have the following routine to create the row and set it as the current row.
OAViewObject viewObject = (OAViewObject) findViewObject(viewObjectName);
int rowCountInRange = viewObject.getRowCountInRange();
Row row = viewObject.createRow();
int insertIndex = rowCountInRange;
if (rowCountInRange == rowsDisplayed) {
insertIndex = rowCountInRange - 1;
viewObject.insertRowAtRangeIndex(insertIndex, row);
viewObject.setCurrentRow(row);
Thanks again all of you for help
Regards
Chaitanya

Can't see or reference table generated by 'Make Table' query.

Hi,
MS Access 2013 --
Not really a programming question per se, but, if I create a query in the MS Access user interface, I cannot reference it; neither can I see it in the Access Objects List, nor can I see using the Objects Search Bar. I have observed this behaviour
numerous times. This seems to be somewhat like SQL 2008 SSMS which requires a refresh at the parent object level before you can see, for instance, a stored procedure you've just created. But, in the MS Access case, the only seeming solution is to open
and close the program. . . .which isn't an actual solution when this is a frequent occurrence. Any thoughts?
Jim

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Thanks
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"
George,
Please explain why you marked your post as "answer" rather than mine. I gave the same advice to update Office 2 days before you. How do you justify your actions? Here is a copy of your post where you advised the OP to follow my suggestion.
Chris Ward

How to make inline format command carry over to subsequent pages

Using Designer 5.7. Using inline formatting in the data file (\b. \b0.) to make part of the text bold (Example: bold text bold text regular text). The problem occurs when the end of page is reached. The text flows to the next page and if the text is split across pages after the bold command was turned on but before it is turned off, the text at the top of the new page is not formatted.
Example of Bottom of Page 1: This is an example of the text at the bottom of page one. This text is supposed to be
Example of Top of Page 2: all bold but the end of page commands cause the bold command to be "forgotten".
Using 1 line subform and an identical overflow subform formatted to reserve space and a Switchpage override in in the Preamble.
It's not feasible to use a field formatted for bold and also be able to determine when it should be used during document generation since the text may be variable in length. Any information is appreciated.

For the time being, I can only respond to Pages for iOS. OS X I'll need to check when I get home (or perhaps someone else will beat me to it). You may wish to post in the Pages for Mac forum for better exposure.
In Pages for iOS you are limited to a single header and footer. There is no Section structure so no way to do different headers/Footers for different pages (as you can do in MS word for example). To modify the Header and insert the text you want: Tap the Tools icon (wrench in upper right), then Document Set up. Tap in the header field, then tap and hold to use the menu to insert pages numbers, then type the text you need.
Quite possibly. Check the app store. Or you may be able to set this up in Pages for OS X and import it into Pages on the iPad. I'm not certain the sections will import however.
Also consider using a different app, such as word for iOS or any of the numerous other word processing apps available.

Repeating Table header rows ?

Tables need one or more header rows that repeat when the
table breaks across pages.
Speaking of breaking, do not let rows break across pages
(unless they are taller than a page). Don't make it an option; just
never do it.
Cheers

Hi Richard,
I will respond to you below!
quote:
Tables need one or more header rows that repeat when the
table breaks across pages.
This is on our list of tables enhancements for the future,
thanks!
quote:
Speaking of breaking, do not let rows break across pages
(unless they are taller than a page). Don't make it an option; just
never do it.
We never break table rows across pages even if it is taller
than the page; any content that exceeds the available space on a
page is clipped.
Regards,
Pete

Header row on multiple pages

Hi All,
Please could someone explain how to conditionally display the Header row on first and subsequent pages, but make it dependent on the body row. That is, if the output flows into the second page and there are line items to display on the second page, only then should the Header appear. If there are no line items for the second / subsequent page then the Header should be suppressed.
I have had a look at form - F110_AVIS_INT - this form has the functionality mentioned above and doesn't use conditional breaks for the Header row - but I cant decipher how it works. Please advise.
Kind regards,
Arijit

Hi Gaurav,
      I have a table and i want to table header to be repeated in subsequent pages but only till 2 pages the table header is visible from the 3rd page onwards the table header is not repeated.
I have selected the Header Row in hierarchy and in Pagination tab for the header row i have checked the the check box Insert Header Row in Subsequent Pages.
After selecting the checkbox also table header is repeated only in 2 pages and not repeated after the second page.
My table hierarchy in form is :
TableSubform
   Table
       HeaderRow
       Row1
In your previous reply you have placed header in a separate subform and you have selected the body subform and in overflow leader you have selected the header subform to be repeated.
In my scenario i selected the TableSubform and in Overflow Laader i selected HeaderRow and tried but it was not working.
I am using Designer 8.0 and Acrobat Reader 8.0
Can you please help me in solving this issue.
Regards,
Bala Baskaran.s
Edited by: Bala Baskaran on Feb 18, 2009 11:11 AM

Header not repeating after 2nd page

Hi,
I want my header to be repeated in all pages of my form.
For this In item subform.I have a added a subformset and its properrties
Acessibility subform role -header row .
Pagintaion:
tick for include header row in intial page
tick for include header row in subsequent pages
place: following previous
tick next
After: continiuos filling parent
But my header is showing up in only two pages but my output of table is 3 pages.
Also,
if I have multiple tables and how can i make same header to be repeated on each page?
rgds
praveen
Edited by: PRAVEEN s on Mar 20, 2009 1:17 AM

Resolved Had to create a new master page & content area.

Dynamic Header row for table not aligned properly on 2nd Page

Hello Friends,
The problem is like this :
We have a table with dynamic number of columns and few of them are being hidden at runtime based on a configuration table.
Now problem while printing is that first page is printing the header row, but same is not being repeated on subsequent pages.
Please see the layout
Header row is warped in 2 subforms both are flowed - western text so that they will get squeezed if column is hidden
Here are the properties for subforms
1) overflowLeader => Flow top-bottom
2) OF_SF => Flowed , western text
On 2nd page all the columns are getting aligned to left hand side whereas printing fine on first page.
Thanks,
Nitin

Hi Nitin,
in this case, you must use more nested wrapper subforms and set the root subform layout from "flow" to "positioned". I cannot give advice on how the wrapper subforms are organized, since it depends on your logic, just try it out.
Cheers,
Tao

Multiple heading rows in a table template does not come across

Hello,
   I've created a table with two heading rows with different content (please see attached file).
   When I import this table format into a new Frame doc, the first heading row gets repeated twice.
   Any ideas about how to fix this?
   I have even tried to make one heading and the other a footer row (at the bottom) but even that formating does not come across in the template.
   Any help would be greatly appreciated.
Thanks,
Anupam.
Using : Framemaker 9 on Windows XP

Anupam,
The import into a new document has nothing to do with what you are seeing. If you look in the table designer, you will see that there is nothing there that specifies that the table must have two heading rows. When you insert a table and select the ids_register table format, the dialog box lets you specify the number of heading rows; it can even be one.
Note that if you insert a second table in your original document and specify you want two heading rows, you get the same result: two heading rows that are both like the first one.
Without know the real details, I am guessing that the table format is capable of remembering only one heading row format.
I know this is not what you wanted to hear, but maybe someone else has a workaround to this.
Good luck,
Van

Nested Tables - Unable to make Table Header row to repeat in subsequent pages

Similar Messages

Maybe you are looking for