NetBoot: full text search not available in Mail.app
Hi,
we got a NetBoot 10.5.2 image with a Mail.app IMAP account already set up.
When you do a search in Mail.app, the "Entire message" button is greyed out and not available.
This probably has to do with Spotlight not playing well in this circumstance...
There is a way to solve this?
Thank you
I don't know if this will apply, but it's worth checking.
http://www.dextechs.com/osx105spotlight.html
It mostly revolves around fonts that can't be indexed by Spotlight, and that may be the case on your NetBook image.
Hope this helps.
Message was edited by: Dave Sawyer
Similar Messages
-
Full-text search not available after upgrade from SQL 2008 R2 Std to SQL 2012 Std
We upgraded our production SQL Server from 2008 R2 Std to 2012 Std last week, and the installation logs show everything was successful, but now we are unable to do any searches against our full-text indexes. The resulting error is as follows:
"Full-Text Search is not installed, or a full-text component cannot be loaded."
When executing the query "SELECT FULLTEXTSERVICEPROPERTY('ISFULLTEXTINSTALLED')", the result is "0". The "Full-Text Daemon Launcher service is also running. When running installation again to add the feature, it shows
"Full-Text and Semantic Extractions for Search" as being installed and unavailable for selection in the list of features to add. As a side note, we did the same upgrade in our identical QA environment before production and everything was successful
and full-text searches are working correctly. We have run the "Repair" routine in the SQL Installation Center and it did not correct the problem.
The full-text catalogs still appear when browsing through the GUI in SSMS or querying sys.fulltext_indexes and sys.fulltext_index_columns. It is not possible to view the properties of the catalog in SSMS, though, as the GUI throws an error and an empty
dialog box is shown. Any other thoughts?
Thanks,
AJI have no idea what is going, but assuming that it is a little pressing to get this fix, I think the best path in this case is to open a case with Microsoft.
Erland Sommarskog, SQL Server MVP, [email protected] -
TREX/Content Server: Full text searches not working
I've setup TREX and Content Server in a sandbox environment and have been trying to get my head around DMS. I've completed what I've believed are the required steps (outlined below) and I have submitted 12 documents of various types into the respository. I'm able to perform meta data searches but not full text searched. Any ideas what I might have missed?
Much thanks!!!!
/Greg
0. Defined connection to TREX Server: TREX_42 (SM59); Using TREXADMIN all services are green.
1. "Define Document Area" - DMS is present; assumed I would use this one.
2. "Defined Indexing Readiness" - selected "Index Release" & "Classify" for DMS; set "Search Srv" to DMS_TEST
3. "Define Content Respository" - Created Z_CR_001 and maintained it as follows:
- Documentation Area: Document Management System
- Storage Type: HTTP content server
- HTTP Server: srv-sptxd2-dal.intervoice.int (content server)
- Port: 1090
- HTTP Script: ContentServer/ContentServer.dll
- Physical Path: /usr/sap/IRD/SYS/global/
4. "Define Content Categories" - Created ZCSSTRUCT; maintained as follows:
- Document Area: DMS
- Content Rep: Z_CR_001
5. Checked CSADMIN for Z_CR_001 - All Green
6. Went into SKPR07 (monitoring tab); entered DMS_PCD1 and "Indexing possible", "Auto indexing" and "DocArea activated" is all green.
7. Went into SMRO
- created SSR: "Search Server ID" = DMS_TEST, "Search engine" = DRFUZZY
- Verified "RFC Destinations"; passed tests; all green.
8. Went into SKPR07; using DMS_PCD1 as document class.
- executed "Clean up table entries"
- deselected "Limited to selected language"
- executed reindex. "Copied successfully from search engine"
- Selected the created index category
- Set the "Document area" indicator
- execute "Trigger process"; 12 documents referenced
9. Going into TREXADMIN I can see the created index; however the document count = 0. Also there is no queue created -- should there be?
Edited by: Greg Preston on Aug 5, 2009 9:11 PMDear
this link will help you,
TREX Architecture
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/71/b26b2bfdc4eb47ab5432e8444290ce/content.htm
File Formats Supported by TREX
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/55/cb634114b78047e10000000a1550b0/content.htm
Detail about TREX Configuration (Basic to advance)
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/46/bab1d48b0a1514e10000000a114a6b/content.htm
Regards
Tushar Dave
Edited by: Tushar Dave on Aug 6, 2009 9:59 AM -
E-Recruiment: Full Text Search Not Working
Hi Guys,
We have a problem with the integration of SAP E Recruitment and TREX Search Engine. Maybe someone can share their idees if same problems occured.
We have of course done investigations on SAP marketplace and the sdn community. In Fact the TREX is configured and works fine for searches with drop down selections, etc> When using full text search however no responses are shown. When performing searches on the indexes in TREX itself we have results on free texts.(as example Web Dynpro application Full Text Search )
Does anyone has a clue where to look? Of course customizing have been reviewed several times. Thanks in advance for any feedback.
Regards
ReginaldI am having the same problem but now in my case the RFC_PERIODICAL_SERVICES job keep running eventually we have to kill it..
It usually runs for less than a min but now it is running for hours..
I have reindex a few time and turn that job off when i was reindexing but still no resolution. Search works in trex admin tool but still not able to search threw website.
I openned up a high priority ticket with sap. Any suggestions would be great.. -
Full text search in local CD-ROM app
Hi all,
I want to develop a local application deploying in CD-ROM,
and I want to use about 1.000 PDF documents.
I thing that it's a good idea to convert the PDFs to SWFs
using the FlashPaper.
My answer is how can I make a full text search using the
contents of these files. Is it possible?
Thanks in advanceHi,
We can create a custom tool for you that will enable you to
search text in
ALL your pdf files. That's not a problem.
If this sounds interesting read this
http://hire.flashjester.com
Regards
FlashJester Support Team
e. - [email protected]
w. -
http://www.flashjester.com
There is a very fine line between "hobby" and
"mental illness." -
Search not working in Mail app
Hello,
I am on a 3.2 ghz intel core i3 iMac 27in from 2010. I'm on 10.7.5 which I recently upgraded maybe a couple months ago from 10.7.2. Mail version 5.3.
For a while now, (and I honestly can't remember if it coincided with the recent upgrade), I have not been able to search my emails which is a huge inconvenience. For example, when I know an email came to me 2 weeks ago with the subject line 'invoice' and I go to type 'invoice' in the mail search box, it comes up with 0 results. Nothing. I know there are probably 30 emails in my mailbox that include that word and nothing comes up. The only thing that does come up is if I search for people, and even then it doesn't come up with everyone, maybe just people in my address book, so if a new email came in from someone and i search their name, that doesn't come up, but if I search my mom's email name, that comes up fine.
This is incredibly annoying and makes no sense why this would just start happening. I have a lot of emails in my inbox and need to search often for old ones. And strangly, the search function works on my phone and seems to work when I connect remotely (my main email I use is icloud).
I have looked at other similar threads and tried using Onyx to reindex my email and spotlight. Didn't help. I tried removing the search box, also nothing.
Is anyone else having this problem or does anyone have a solution? I'm going a little crazy trying to figure this out and wondering why certain things like reindexing seems to work for some but not me.
Thanks for all the help!From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.
If extensions aren't causing the problem, see below.
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found -
Full-Text search is not working with PDF files - SQL Server 2012 64 bit
Hi,
We are in the process of storing PDF files in SQL Server 2012 with Full-Text search capability.
I followed the steps as below and it works fine with word document but not for PDF files. I tried with PDF ifiler 11 & 9 and both are unsuccessful.
Server/DB Level Settings:
1)
Enable FileStream
2)
Install Full-Text
then restart
3)
Use [specific db]
alter
database [db name]
add
filegroup Files
contains filestream;
alter
database [db name]
add
file (
name = N'Files',
filename =
N'D:\SQL\DATA') to
filegroup [Files];
3)
Database level
Settings:
FileStream:
FileStream
Directory name:
[Set the name]
FileStream
non-transacted
Access: [set Appropriate]
3a)
Add a
datafile to DB
with filestreamdata
filetype.
4)
Share D:\SQL\DATA
directory and
add specific accounts
with read/write
access
5)
Give bulkadmin
access to those
specific accounts
at server
level
6)
From the
page (link)
download and
install the *.pdf
IFilter for
FTS. Link:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5542
7)
To the
PATH global system
variable add
path to the
catalog,
where you installed
the plugin.
Default for
this version is:
C:\Program
Files\Adobe\Adobe
PDF iFilter 9
for 64-bit
platforms\bin
8)
From the
page (link)
download a
FilterPackx64.exe
and install
it. Link:
http://www.microsoft.com/en-us/download/confirmation.aspx?id=20109
9)
Now from
SSMS execute the following
procedures:
-sp_fulltext_service
'load_os_resources',1
-sp_fulltext_service
'verify_signature', 0
EXEC
sp_fulltext_service
'update_languages';
-- update language list
EXEC
sp_fulltext_service
'restart_all_fdhosts';
-- restart daemon
reconfigure
with override;
10)
Restart the
server
11)
select document_type,
path from
sys.fulltext_document_types
where document_type
= '.pdf'
-select
document_type,
path from sys.fulltext_document_types
where document_type
= '.docx'
12) Results are OK.
Following is my Table /Index/ catalog script:
CREATE
TABLE dbo.DocumentFilesTest
DocumentId INT
IDENTITY(1,1)
NOT NULL
PRIMARY KEY,
AddDate datetime
NOT NULL,
Name nvarchar(50)
NOT NULL,
Extension nvarchar(10)
NOT NULL,
Description nvarchar(1000)
NULL,
FileStream_Id UNIQUEIDENTIFIER
ROWGUIDCOL NOT
NULL UNIQUE DEFAULT
NEWSEQUENTIALID(),
FileSource varbinary(MAX)
FILESTREAM DEFAULT(0x)
go
--Add default add date for document
ALTER
TABLE dbo.DocumentFilesTest
ADD CONSTRAINT
DF_DocumentFilesTest_AddDate
DEFAULT sysdatetime()
FOR AddDate
EXEC
sp_fulltext_database
'enable'
GO
IF
NOT EXISTS
(SELECT
TOP 1 1 FROM sys.fulltext_catalogs
WHERE name
= 'Ducuments_Catalog_test')
BEGIN
EXEC sp_fulltext_catalog
'Ducuments_Catalog_test',
'create',
'D:\SQL\PDFBlob';
END
--EXEC sp_fulltext_catalog 'Ducuments_Catalog_test', 'drop'
DECLARE
@indexName nvarchar(255)
= (SELECT
Top 1 i.Name
from sys.indexes
i
Join sys.tables
t on
i.object_id
= t.object_id
WHERE t.Name
= 'DocumentFilesTest'
AND i.type_desc
= 'CLUSTERED')
PRINT @indexName
EXEC
sp_fulltext_table
'DocumentFilesTest',
'create',
'Ducuments_Catalog_test',
@indexName
EXEC
sp_fulltext_column
'DocumentFilesTest',
'FileSource',
'add', 0,
'Extension'
EXEC
sp_fulltext_table
'DocumentFilesTest',
'activate'
EXEC
sp_fulltext_catalog
'Ducuments_Catalog_test',
'start_full'
ALTER
FULLTEXT INDEX
ON [dbo].[DocumentFilesTest]
ENABLE
ALTER
FULLTEXT INDEX
ON [dbo].[DocumentFilesTest]
SET CHANGE_TRACKING
= AUTO
ALTER
FULLTEXT CATALOG
Ducuments_Catalog_test REBUILD
WITH ACCENT_SENSITIVITY=OFF;
INSERT
INTO DocumentFilesTest(Extension,
Name,
FileSource)
SELECT
'pdf'
'BOL12006553.pdf'
* FROM
OPENROWSET(BULK
'd:\SQL\PDFBlob\BOL12006553.pdf',
SINGLE_BLOB)
AS BLOB;
GO
INSERT
INTO DocumentFilesTest(Extension,
Name,
FileSource)
SELECT
'docx'
'test.docx'
* FROM
OPENROWSET(BULK
'd:\SQL\PDFBlob\test.docx',
SINGLE_BLOB)
AS Document;
GO
SELECT
d.*
FROM dbo.DocumentFilesTest
d WHERE
Contains(d.FileSource,
'BILL')
Returns nothing. it should come from PDF file
SELECT
d.*
FROM dbo.DocumentFilesTest
d WHERE
Contains(d.FileSource,
'TEST')
Returns from word document as follows:
2 2014-06-04 10:11:41.393 test.docx docx
NULL [BINARY Value] [Binary Value]
Any help is appreciated. Its been a long wait.
Thanks,
Vel
Vel ThavasiHello,
Did you check the fulltext log files for more details about the errors. If the filter isn’t working, there should be errors in the error log file.
The following thread is about similar issue, please refer to:
http://social.msdn.microsoft.com/forums/sqlserver/en-US/69535dbc-c7ef-402d-a347-d3d3e4860d72/sql-server-2008-64bit-fulltext-indexing-pdf-not-working-cant-find-ifilter
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support -
Full-Text Search has not worked since we upgraded to 2012
I have a filestream database and table. Our full-text searches have always worked until we upgraded to SQL 2012 in December. Now, no file that has been uploaded since December is searchable. What has gone wrong here. It should have been
a clean upgrade. We are not getting any error messages. We are just not getting any records returned when we search on a word that we know are in the documents we've uploaded since December (for instance, the word 'aluminum').
Filestream is enabled for the instance.
A full-text catalog exists and contains a full-text index (the same one we've always had). Full-text indexing is ENABLED.
I've tried rebuilding the catalog and the index. I've tried to do a FULL POPULATION on the table.
We haven't changed our queries nor the way the files are uploaded.
Nothing works. I have been a database administrator since the SQL 2005 days and I have never seen anything like this.
Please help.Hi GINGER PIERCE,
Since the issue regards SQL Server Search. I will help you post the question in the related forums. It is appropriate and more experts will assist you.
According to your description, in theory , if you can do a full-text search for SQL Server 2008, when upgrading the SQL Server version from 2008 to 2012, the Full text indexing feature should be run well in SQL Server 2012 databases. If not , you can try
to restore your database from SQL Server 2008 to SQL Server 2012, create an new Full-Text Catalog and Index on the table or view in the database, and then use Full Text Index to search words, phrases and multiple forms of word or phrase via FREETEXT() and
CANTAINS() with “and” or “or” operators. check if it is normal that the full-text search feature is enabled in the SQL Server 2012 instance. For more information , see:
Full Text Search step by step in SQL Server 2012.
Note: In SQL Server 2012 SP1 , the server will report that Full Text Search is not supported in this edition of SQL Server when it clearly is. The workaround is to create the initial catalog by using a T-SQL query:
CREATE FULLTEXT CATALOG
In addition, since it is a fileStream database, we need to verify if you do Full Text Searches on documents in FileTables, if yes, you should enable FileStream database for your SQL Server, and enable FileTable options for the database. For more information,
see:
Full Text Searches on Documents in FileTables.
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support -
Full-Text Search is Enabled But It Is Not Working.
I Have Already Installed SQL SERVER 2008 ANd Full Text Search Is Also Running I Check It Via Query It Is Also Return !. Now What i M DO?????
Hello,
What's the database role of the current user? If it is not a a member of the db_owner, or db_ddladmin,
you must have CREATE FULLTEXT CATALOG permission on the database, or have REFERENCES permission on the full-text catalog and ALTER permission on the table or indexed view.
For example:
GRANT REFERENCES ON FULLTEXT CATALOG :: Catalog_name TO User ;
Reference:GRANT Full-Text Permissions
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
Full text search in Chinese Language not finding results
We are translating one of our Webhelp projects into
simplified chinese, and everything is working fine except full text
search. We can type chinese characters into the search box but no
results appear even though we have already translated a lot of the
webhelp into chinese. Note that we have breadcrumbs, TOC and Index
functioning correctly in chinese.
The FAQ for Robohelp claims that FTS is supported in other
languages but I am stuck - I can't figure out how to make it work.
Any help would be greatly appreciated.There was some language stuff in those patches that I hoped
would fix your problem, obviously not.
I am not familiar with working with languages. Have you tried
changing the language in Project Settings? Have you tried importing
a couple of topics into a new project?
Beyond that, hopefully someone with more relevant knowledge
can help you. -
Full text search in IMAP accounts
I use IMAP with apple mail.
Whenever I try to do a full text search using the spotlight in mail it doesn't find messages most of the time.
I guess that it only finds the messages, which have been viewed previously. It should look at the messages on the server but not necessarily downloaded.
Can somebody shed some light on this on how this is supposed to work.
I have the option to keep messages for offline viewing set for only messages read.
THXManilx, what you're saying doesn't make sense.
I hope I'll myself clear:
It is only available when I select a folder within
a mailbox.
What folders are you talking about? Could it be that
you're calling "mailbox" the (@) icon that
groups the custom mailboxes stored remotely at the
IMAP server?
I have 2 imap accounts defined in mail. Each one has several folders (on the imap server) underneath it. When I select the account (world icon) the option is greyed out. When I select one of the imap folders I can run it.
It clears all messages, runs a while then the messages reappear BUT when I select them this is when they are fetched from the server.
UNLESS mail is still fetching them behind scenes... But there is no indication of this (no counter or whatever to see what it is doing).
This is what Rebuild does (quoted from Mail Help):
For IMAP accounts, locally cached
messages are discarded and the messages are
downloaded again from the server to your hard disk.
Your mailbox appears empty until the download is
complete.
I don't thin k this is what I'm seeing.....
Thx for your suggestions! -
When can oracle support full text search for Simplified Chinese?
When I create index using the create index clause,the following errors appears
"ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: interMedia Text error:
DRG-11440: operation not supported for the SIMPLIFIED CHINESE language"
Maybe I have to use like to query words...
Did somebody encounter the same problem and have a good solutions?I am expecting your help!
nullHi,
Full-text search capabilities is not currently not supported and Unfortunately, we do not have a timeline as to when it will be available.
You can post a feedback on the below link.
http://feedback.azure.com/forums/217321-sql-database
Regards,
Mekh. -
Hi,
I have a problem with UCM (10gR4) full-text search. I does not return any results.
In the Repository Manager applet, Indexer tab, I have run the indexer (under Collection Rebuild Cycle) and waited until it finished. It said that it has indexed 5424 files as full-text.
Under *"Configuration for Stellent"*, I have the following data:
Search Engine:: DATABASE.FULLTEXT
Index Engine Name: DATABASE.FULLTEXT
Active Index: IdcColl1
So, I think everything looks fine. Does anybody know why it doesn't work?
Thanks in advanceDuring installation have to executed fulltextindex.sql that is available under oracle\ucm\server\database\oracle\admin folder?
If not kindly exectute it.. -
I have one user who has issues with full text searching. We're running GW7.0.2 on OES2 - with approximately 140 users - one of which experiences extreme slowness with full text searching. We utilize the DMS - so he's attempting searches thru docs and emails. He does have a rather large mailbox - but his problem started middle of last week. We've run GWChecks (Structure/Content/Rebuild) on his user and message databases - still slow. We've archived mail out (reducing the size of his mailbox) - still slow.
Any ideas?
Thanks!
SueHey Dave!
It does appear to affect his email and not the documents, so much. He gets fairly quick results in the library section.....but searching emails takes longer than he has patience for. Can you clue me on how to redo his email indexes - and nothing else? Or isn't that possible? (hate to mess up someone else trying to fix this guy! lol)
Thanks!
Sue -
I have downloaded JavaHelp using Sun Download Manager (download and extract JavaHelp) to activate Full-text Search in RoboHelp. But, while generating Help in RoboHelp, I get an error that JavaHelp is not installed. I am not able to understand how to Install JavaHelp. Please help.
That's the way it worked in X4 and later versions up but not including RH8. RH8 includes phrase searching in webhelp.
See www.grainge.org for RoboHelp and Authoring tips
Maybe you are looking for
-
Help* Getting a pop up that says Your Apple computer has been blocked
My partner was using my laptop yesterday and was trying to download the NHL hockey game stream from nhl-stream.com. He tried downloading it and downloaded MacKeeper and some video player. This morning I realized what he did so I googled how to uninst
-
Please help, I am running Windows 7 Home Premium and have problems with loading FLASH Player
Everytime I attempt to load Adobe Flash Player, it says it is installing but then I get a screen that say, must close Internet Explorer, which I do, then the down load continues. It eventually takes me to a window that is for Adobe Photoshop Element
-
File Adapter Writting and Reading strategy
Hi All, When i am trying to write data to file, it was opened by another person and it gave error in the receiver communication channel saying like source is using by another application. Which is well and good But in case of Sender channel while wri
-
Open URL Ivew in a new window without loosing the current session in Portal
Hi All , I have a requirement in which there are two tabs in portal which are two roles A and B Where each tabs(role) has an URL Iview attached to it. Current I am in Window 1 - Tab A When I click on Tab B, it has to open in a new window (Window2) wi
-
Unresponsive clicks in MacBook Pro
I have a MacBook Pro with snow leopard (10.6.6) in it. Lately my macbook is somehow unresponsive to clicks wheter using mouse ot not. I sometimes need to click twice for it to get a reaction. Please help me solve this.