Netflix is not showing up in menu

Netflix is not showing up in menu, any suggestions?

I am having the same problem!  Where are you located?  I live in Japan but stream Netflix using an US IP address.  I bought a tv and apple tv just to stream Netflix.  It's so frustrating!

Similar Messages

  • Air Play icon not showing up in menu bar. How do I fix this?

    Air Play icon not showing up in menu bar. How do I fix this?

    What year is the MacBook Pro from?
    AirPlay: iOS and Mac

  • TS3798 My Apple TV Does NOT show the Internet menu option. Has all the other options but the Internet. I am connected to the Internet as I can  Rent, Buy ,etc..movies from the Apple Store...

    I have a first Genreation iPAD and just a new Apple TV, 3rd Generation. The Apple TV does not show the Internet menu option after booting up.

    There isn't one.
    AppleTV3 has icons for all the internet features.

  • I have a imac mid 2011 model, why can't i connect to airplay?  And the airplay icon does not show in the menu.

    I have a imac mid 2011 model, why can't i connect to airplay?  And the airplay icon does not show in the menu.

    Hi there cjperido,
    You may find the troubleshooting steps in the article below helpful.
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts5209
    -Griff W. 

  • Hard disk not detected during booting or also it does not show in boot menu.

    hard disk not detected during booting or also it does not show in boot menu please tell

    you may have a failed hard drive or bad cables, i would check first to see if the hard drive is powering on. if it doesn't try a different power connection, and if it still doesn't start spinning i would say that it is bad and get a new hard drive. If
    it does start spinning and just isn't being recognized, try a different sata port if you have the option or a different sata cable all together.

  • Application list not showing in GoTo menu in 5130

    When I try to add applications to the GoTo menu in 5130-c2, the application list (from Select Options) is not showing. Instead it hangs and I need to switch off my phone and restart. My software version is latest. Please help me solve this. I have installed applications both on phone and on memory card.

    Hi,
    dont dispaly data directly,after  creating the both objects for containers and code for fcat and lay out ,
    then execute the report , if you able tos see small grid in corner, u can dispaly internal table by using settable_for_first_display.
    Thanks
    Srini

  • Pic not showing up in Menu (Black and Gray 3 photos across)

    I created a menu and it was all okay when I went back into it to burn, I preview it first and the 3 photos across arn't showing so I droped them in again and it's still not working.
    What am I doing wrong or what did I do to make them not show. Can anyone help? I need this get this DVD done tonight
    Thank you
    Alicia

    GOT IT!!!!
    I del. the com.apple.iDVD.plist....
    Thanks to others posts I've read....

  • Non-button text not showing up in menu

    Is it normal for text in a Blu-ray menu that is not a button to not show up in the menu once it is on a disc or disc image? This is the last issue I am having.
    I have some text on a menu that is just text. I have had plain text in the past work perfectly, but this time around Encore isn't rendering it. In the past though, my motion menu footage was in compliant m4v format, and this time it's mp4 so that Encore would transcode it. Using m4v was causing red frames to show up in the footage.
    Is there a way for me to fix this easily, either in Encore of Photoshop?

    I feel really slow...
    The only background in a multipage menu is the background in page 0.
    When you add anything to the page 1 or 2 groups, it can only be a button.
    So yes, the workaround to getting text that only shows on a single page is to put it in a button.
    You told us everything we needed in the original post, except, of course, that it was a multipage - but the symptom made that an easy guess. Sorry a little slow on getting there!

  • Scripts will not show up in menu

    Hello
    I just recently started using Photoshop CS5. In the past versions you would be able to drop a java script in the Adobe/Presets/Scripts folder and the next time you launched photoshop the script would then be listed under File > Scripts. It now seems that in CS5 that is not the case in both the windows version and the mac version. I really need the script to show up in the menu and I do know the script works in CS5 because if I select File > Scripts > Browse it does run without any issues. The next thing I tried is duplicating a default script that DOES show up in the menu and renaming it and when I launch Photoshop that duplicated script does not show up in the menu. What changed because this was a non-issue in the previous CS versions.  Help needed because this is a very important part of my workflow.
    Thanks in advance

    I use a PC an old one therefore 32 Bit CS5 I do not have that Problem.  In fact I even install my Photoshop Scripts outside of the Adobe's Photoshop Tree.  I'm able to do that by placing a link/shortcut to My Photoshop Script tree into Photoshop's Presets\Scripts. I do this because I use many of my script in actions and when you do that the full script file path is recorded into the action step. So I do not want my scripts path to change with each version of Photoshop My Photoshop scripts stay put. Using HARVEST_EXCEPTION_ZSTRING I have been able to Group them by script type In Photoshop's menu File>Scripts>.... and have my Photoshop Plug-in script show up in Photoshop menu File>Automate>... In fact I think it works better in CS5 for CS3 would only list some number of scripts then stop listing the other scripts  you had to use the browse item to get to the. 
    Here are two examples
    <javascriptresource>
    <about>$$$/JavaScripts/orient/About=JJMack's Orient^r^rCopyright 2009 Mouseprints.^r^rRun twice script utility for action.^rNOTE:Don't play other actions between runs!^rFirst Run records orintation and rotate Protrait to Landscape^rSecond Run removes orintation recorded and rotates Portrats back.</about>
    <category>JJMack's Action Run Twice Utility</category>
    </javascriptresource>
    // BEGIN__HARVEST_EXCEPTION_ZSTRING
    <javascriptresource>
    <name>$$$/JavaScripts/AspectRatioSelection/Name=Aspect Ratio Selection...</name>
    <about>$$$/JavaScripts/AspectRatioSelection/About=Aspect Ratio Selection Plug-in Version 0.0 By JJmack a Hacker use at your own risk Quality forget about it.</about>
    <menu>automate</menu>
    <category>JJMack's</category>
    <enableinfo>true</enableinfo>
    <eventid>3caa3434-cb67-11d1-bc43-0060b0a13dc5</eventid>
    <terminology><![CDATA[<< /Version 1
                             /Events <<
                              /3caa3434-cb67-11d1-bc43-0060b0a13dc5 [($$$/AdobePlugin/AspectRatioSelection/Name=Aspect Ratio Selection) /imageReference <<
                                   /width [($$$/AdobePlugin/AspectRatioSelection/Width=width) /pixelsUnit]
                                   /height [($$$/AdobePlugin/AspectRatioSelection/Height=height) /pixelsUnit]
                                   /flagCENTER [($$$/AdobePlugin/AspectRatioSelection/Center=center) /boolean]
                                   /flagBORDER  [($$$/AdobePlugin/AspectRatioSelection/Border=border) /boolean]
                                   /flagRECTANGLE [($$$/AdobePlugin/AspectRatioSelection/Rectangle=rectangle) /boolean]
                                   /flagELLIPSE  [($$$/AdobePlugin/AspectRatioSelection/Ellipse=ellipse) /boolean]
                                   /flagREPLACE [($$$/AdobePlugin/AspectRatioSelection/Replace=replace) /boolean]
                                   /flagADD [($$$/AdobePlugin/AspectRatioSelection/add=add) /boolean]
                                   /flagSUBTRACT [($$$/AdobePlugin/AspectRatioSelection/Subtract=subtract) /boolean]
                                   /flagINTERSECT [($$$/AdobePlugin/AspectRatioSelection/Intersect=intersect) /boolean]
                                   /feather [($$$/AdobePlugin/AspectRatioSelection/Feather=feather) /pixelsUnit]
                                   /flagANTIALIAS [($$$/AdobePlugin/AspectRatioSelection/anti-alias=anti-alias) /boolean]
                              >>]
                             >>
                          >> ]]></terminology>
    </javascriptresource>
    // END__HARVEST_EXCEPTION_ZSTRING

  • All PDF Presets Not Showing Up in Menu

    There are 14 total PDF presets between both Settings folders on my computer (Mac 10.8.5). Only 10 of them are showing in the Adobe PDF Presets menu item. Does anyone know why all of them wouldn't be showing up?
    Thanks,
    Lloyd

    I'm in InDesign CC 2014. All of the missing ones came with InDesign, as far as I know…they all have the same creation dates. I created two and they ARE showing up. And it's not consistent; some from each folder are showing up, and some from each folder are not showing up. A couple of them are named PDFA1b as opposed to PDFX1a (etc.). Also, two that aren't showing up have JPN in the file name (right before the period) but one that has JPN in the file name IS showing up. It's not a huge deal, I was just curious why some would and some wouldn't.Thanks!

  • Canon IJ Network Scanning Utility not showing up in Menu bar

    Hi, I recently performed an erase and install of my Mac. I then used Migration Assistant to restore my data. I have a Canon MP620 Wireless Printer. I noticed that the Canon IJ Network Scanning Utility is not showing up in the menu bar. How do I get it to show up again?
    Message was edited by: Stuart Lawrence

    When installed, the Canon IJ Network Scan Utility is located HD > Library > Printers > Canon > BJPrinters > Utilities. Double click the utility and the icon will appear on the menubar. If you want the utility to start on login, then you can add it to your Login items, located in System Preferences > Accounts.

  • Officejet 6600 fax not showing up in menu using windows 7 64

    I using windows 7 64 I reinstalled hp software for Officejet 6600 all in one, but my faxing software will not show up in the menu . I have removed all drivers related to Officejet 6600 several times same problem every time . The fax menu was there before all hardware is still the same.

    Hi G2123,
    I understand you are no longer able to fax from your computer as the Officejet 6600 fax is not showing up. I suggest starting with the HP Print and Scan Doctor.
     The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
    Connectivity :
     USB: Verifies that the USB connection from your computer to the HP product is working correctly.
    Network: Verifies that the network connection between your computer and your network is working correctly.
    Device Status Test : Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
    Driver Check : Checks for missing or corrupt driver files.
    Device Manager : Checks for problems in Device Manager that would prevent printing.
    Device Online : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
    Print Queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
    Port Match : Checks the port settings for the HP product.
    Device Conflicts : Checks for conflicts with other drivers, such as other printer brands.
    Ink Issues : Checks the cartridges and ink levels for issues that affect print quality.
    Print Settings : Checks and adjusts the print quality settings.
    Test Print : Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
    Scan Tests : Checks the scan mechanism, drivers, and registry entries.
    You can also click the Printer menu to find the additional features such as cleaning printheads, aligning printheads, checking ink levels, and viewing advanced printer data for your selected printer.
    Source: Try the HP Print and Scan Doctor for Windows
    Click here to download and run the utility > HP Print and Scan Doctor
    Please let me know if this resolves the issue, thanks.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Not showing movie in menu

    My Apple tv does not show the movie or tv series in the menu, so assume it is not able to contact itunes. I have access to internet, as I can watch youtube clips on it.
    Anybody have had this problem before? I have not changed any password etc in itunes lately, and I can use the same apple ID from my Ipad.

    I absolutely love the TV also but I am about to return it. It is driving me crazy. My biggest two gripes about it.
    1. It is not being recognized by my computer. I have restarted everything many times and removed everything from my network and tried to re add it but it just doesn't help.
    2. I always have to resync everything because I have all my media on an external hard drive which is attached to my time capsule. I am constantly having to put in my password (for the time capsule) to make my computer hook up again with the external drive. It is infuriating. Whenever I try to watch a TV show (The Office recently) it says "file format not recognized). I have to go and re enter my password and then resync the TV.
    Can anyone answer this question? How do I get iTunes to recognize TV?

  • Photos Not Showing in Computer Menu

    Everything seems to work fine with my new ATV (2nd gen) except photos from iPhoto will not display in the Computer menu. I can see all of the folders I set to Home Share via iTunes, but the photos do not display in the folders. My movies and music work fine. Screen Share even works fine displaying photos from iPhoto.
    When I first set up the ATV, a few photos displayed in one album (but most did not) under the Computer menu. Now no photos are displayed. The folder names display fine, but when I click on a folder, the photos never show up.

    My photos were not showing up in the Apple TV menu either. You have to click on the music folder listed under computers. Then you need to choose photos and scroll down to your music folder. There you will find your photos. Kind of lame, but Apple accesses everything through iTunes.
    Apple Tech Support walked me through this today.

  • Video podcasts not showing in podcast menu

    my video podcasts are not showing up on ipod touch when I sync. They are on the ipod, cause when I search, they show up under podcast header (so they are not mis-labelled as music or anything), but they do not show up in the podcast menu. This applies to all my video podcasts. I think its a bug.

    Wow, that does work. There they all are but I think this is annoying, that I have to go to a seperate app to see my video podcasts, as apposed to aduio podcasts, in the podcast menu, but at least I can see them. Thanks!

Maybe you are looking for

  • How to use sub folder paths for external table location parameter?

    is it possible to use one Oracle directory and address multiple files under some OS sub-directories beside that Oracle directory? Like; host mkdir /tmp/orcl_dir host mkdir /tmp/orcl_dir/fold1 host mkdir /tmp/orcl_dir/fold2 CREATE DIRECTORY ext_tab_di

  • My Nvidia 8800gt doesn't work properly

    I solved part of this issue removing my 550W UPS from my Mac (obviously, Mac Pro needs at least 1500W UPS) But the problem is that everytime an app, a render or a game (Final Cut, Youtube, Portal 2, etc...) need graphic hardware, the Mac Pro freezes

  • Custom error message on constraint violation?

    Hi All, I have a table with couple of columns where only value can be inserted but never updated. So the users do not have permission to update those couple of specific columns. So when the front end application which is a vendor supplied product iss

  • SSRS passing as Parameter

     I have a table with fields SELECT TOP 1000 [BAT_TYPE]       ,[ITEM_TYPE]   FROM [dbo].[BATT_TYPES] bat_type  item_type 120-M  Batt 54-FM  Batt 45-FM    Batt | | | | commercial Non-Batt fuel            Non-Batt tender          Non-Batt I need to pass

  • ZEN MOZAIC EZ 300 8mg is stuck on rebuilding

    ,Is there?ANY way to get HELP for my ZEN MOZAIC EZ 300 8 Mg player It has shut down and stuck on rebuilding. I have tried for days to get some help on the webpages listed on the instruction sheet. but it has been a waste of time. If no one can help m