NetMsmqActivator and NetPipeActivator Services

Hi fellow Server Managers
I have searched for endless hours about this, and all i find is developer related articles. The two services mentioned in the subject has stopped, and when i try to start them manually, Visual Studio wants to debug them.
I am out of options here, so i hope that someone can shed some light on this.
Thank you, as always.

Hi,
The Display name of NetMsmqActivator service is: NetMsmqActivator. The Display name of NetPipeActivator service
is: Net.Pipe Listener Adapter. Would you please let me know OS edition information of the server? Did you remember that do any changes before this issue occurred? For examples, install updates, reboot the server or any other? Meanwhile, please open Event Viewer
and check if find some relevant errors. Those may help us to go further analyze.
In addition, please run
net start netmsmqactivator and net start netpipeactivator commands with Administrators, then monitor the result.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Similar Messages

Following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions?

following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions as this is messed up all of my work relations?

Had the same problem this morning after updating to 10.8.2. Mail was finding my dot-mac account as always, but System Preferences popped up and said my iCloud password was incorrect. Did the "forgot password" reset, but still had the same problem. Then I went to icloud.com in Safari, logged in with the new password, it worked no problem. So I went back to the icloud preference pane, signed out of icloud, answered yes to all the warnings about data being deleted from my mac, blah blah blah, then re-signed in to icloud. Everything worked. I did have to set up my icloud account in Mail again, which now lists the account mailbox as "iCloud", and not "mac.com" as it did before. But so far, everything is working (fingers crossed.)

Business Systems and Business Service - does any difference

Hi Experts,
Could any one please guide me what is the difference between
Business Systems
and
Business Service.
Which situations we use Business Systems / Business Service.
Does it have any performance issues?
Why we are not configuring Business service in SLD?
Cheers Experts!!
Sunil

Hi Sunil,
Business System: Address a particular business system as the sender or receiver of messages.
A business system is an actual application system in a system landscape. A business system
(service) comprises information about the inbound and outbound interfaces and the software
component versions of the business system. The business system services are used when
configuring internal company processes.
Business Systems are Logical Senders or Receivers that exchange messages by using the Integration
Server and that are entered in the System Landscape Directory.
The Business Systems in the System Landscape Directory relate to a system landscape.
The Business Systems of business partners are therefore not entered in the System Landscape
Directory. To be able to address such business partners logically, use communication components in
the Integration Directory. A business system is a way of specifying a communication component in the
Integration Directory more precisely (business system component).
Business Service: Address an abstract business entity as the sender or receiver of messages.
Using a business service, you can define the technical or business subunits of the companies
involved and then assign them the relevant interfaces. The business services are used when
configuring cross-company processes.
In the PCK, the Service is of type Business Service. It represents an abstract, addressable unit.
Business services are used in cross-company processes, for example, if the parties involved have only
published their interfaces and not their system landscape, or it is only partly known.
Using a Business Service,we can define the technical or business subunits of the companies involved
and then assign them the relevant interfaces.
It is useful to use Business Services when configuring cross-company processes. Usually, the
interface descriptions of the business partners involved are made publicly available.
Also,There is already lot of thread regarding the same discussion, please see it below.
Business service or Business system??
Re: Business Service <--> Business System
Difference between Business service, Business system and Business process
Business Service vs Business System in Integration Directory.
Business Service (vs) Business System in Integration Directory.
What is the difference between Business System and Business Service?
business system and business service
Diff b/w Business service & Business System?
Regards,
Vinod.

Parties, Business Systems and Business Services

Hi guys,
I've read a lot about items in subject, but have some doubts about applying them to my scenario. I have to integrate SAP system and web service.
As far as I understand concepts, this is B2B communication, so I have to use parties. To represent SAP system I use Business System, as it's described ins SLD, and for Web service I use Business Service... just as we use business services for web services
--- Am I right here? Will it work ok in reciever determination, agreement?
Thank you.

Hi,
You are doing the usage of business systems and services in proper way.
The scenario will difinately work with combination of business system and service.
It will be fine for all other configurations such as Receiver Determination, Sender/receiver agreements and interface determination etc.
Please see below the importance of Parties, Business Systems and Business Services
A communication party
A communication party (party for short) represents a larger unit, which is involved in a collaborative process. Using a communication party, you generally address a company within a cross-company process.
You can assign a communication party one or more services to address it as the sender or receiver of messages.
A business system
If you want to address a particular business system as the sender or receiver of messages, choose this service type.
A business system is an actual application system in a system landscape. A business system (service) comprises information about the inbound and outbound interfaces and the software component versions of the business system.
You usually use business system services when configuring internal company processes.
A business service
If you want to address an abstract business entity as the sender or receiver of messages, choose this service type.
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
You usually use business services when configuring cross-company processes. In this case, you only make your interfaces known to the business partners involved and either do not make any details about your own system landscape available, or only specific details.
For example, you can define RosettaNet Partner Interface Processes (PIPs) as business services.
Thanks
Swarup

What is difference between ESB Service and ESB Service Group

Guys please tell me What is difference between ESB System and ESB Service Group and when we use them, i mean in what condition.
Many Thanks
Deepak

The use of these is explained in the ESB developers guide along with some examples in what case to use them. See: http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28211/esb_jdev.htm#sthref167

Diff b/w Web service and window service

What is the difference between web service and window service, whether the both are same or not, Give some explain about that each one and give some examples also.

An XML Web service is a component that implements program
logic and provides functionality for diseparate
applications. These applications use standard protocols,
such as HTTP, XML, and SOAP, to access the functionality.
XML Web services use XML-based messaging to send and
receive data, which enables heterogeneous applications to
interoperate with each other. You can use XML Web services
to integrate applications that are written in different
programming languages and deployed on different platforms.
In addition, you can deploy XML Web services within an
intranet as well as on the Internet. While the Internet
brings users closer to organizations, XML Web services
allow organizations to integrate their applications.
A Windows service starts much before any user logs in to
the system (if it has been setup to start at boot up
process). A Windows service can also be setup in such a way
that it requires a user to start it manually ? the ultimate
customization!
Windows services run as background processes. These
applications do not have a user interface, which makes them
ideal for tasks that do not require any user interaction.
You can install a Windows service on any server or computer
that is running Windows 2000, Windows XP, or Windows NT.
You can also specify a Windows service to run in the
security context of a specific user account that is
different from the logged on user account or the default
computer account. For example, you can create a Windows
service to monitor performance counter data and react to
threshold values in a database.

Starting single sign-on and directory service

i am trying to install oracle 9i infrastructure on my clean win2000 box with 2.4 GHz proc and 1GB RAM.
i am getting falilure messages for the following:
infrastructure instance configuration assistant: failed
oracle 9i application server randomize password: failed
single sign on configuration assistant: failed
infrastructure mod-osso configuration assistant: failed
OPMN configuration assistant: failed
log file says:
Configuration failed for IAS
IAS Instance creation failed
Configuration failed for JAZN
JAZN configuration failed: unable to establish a directory context.
Configuration succeeded for IASProperty
Configuration failed for IAS
Configuration failed for JAZN
after which single sign-on and directory service dont start. which means no connectivity :(
can somebody please guide me about how to avoid this failure in installation or how to manually start these after installation.
it would be a great help
ashish

Hi,
we're having exactly the same problem.
Could you tell me what the problem is with the network ?
You say configure it properly but what do you mean ?
It's installed on a Windows 2000 Server machine, it's own DNS.
Thanks,
Yuri Arts

BEST BUY ONLINE NEEDS SOME HELP AND CUSTOMER SERVICE NEEDS TO BE HELPFUL

After having just spent an hour trying to order something that the website says was in stock, and then finding it really wasn't available, it became obvious to me that Best Buy online leaves something to be desired. It seems like a classic bait and switch. Get people to the website with a low priced "deal", only to find it isn't available, however a more expensive version is available.
So, I call customer service. I get someone who assures me the order will go through, provide my credit card, redeem my points, and only to find it would not work after all, as it didn't for me. So I ask for a supervisor. And I get someone who says "I don't know" and has no answers except that this is the way it is. To add salt to the wound, he announces that unlocked phones cannot be ordered via telephone. When asked why the rep didn't know that, yes, another "I don't know".
As a Best Buy customer who spends way too much money at Best Buy, I find this entire situation unacceptable. As they say, vote with your feet, I will be exploring other stores to spend my money at. A website that says something is available, and then isn't, simply is bad business. And customer service who can only say "I don't know" isn't really customer service at all.
A "out of the box" idea would be to listen to what I'm saying, and fix it; this isn't the first time this has happened. Simply saying "I don't know" is only irritating customers who are trying to buy things from Best Buy. I am so frustrated with the situation and I assure you I will look elsewhere for future needs/wants.

Hello User269123,
I apologize for the lengthy delay in responding to you. While we try to reply to all customer service issues posted on the forum within 3 to 5 business days, we don’t usually receive requests for assistance through our IdeaX board. In the future, please make sure that you are posting any customer service related issues to the Customer Service boards to ensure a timely response.
Having said that, I pulled up your account via the email address attached to your forum profile to properly document your ideas to make sure we take advantage of the feedback you’ve offered. I was glad to see your concerns reached Dan on our executive support team and that he was able to address your case in a timely manner.
Thank you for posting,
Alex|Social Media Specialist | Best Buy® Corporate
Private Message

Correct idea to scale out testing environment and test service pack2 installation

Hi
I have a sharepoint 2010 farm it has one sharepoint server, one database server
In one server below services are running
Central administration service
SharePoint Server Search
User Profile Service
Microsoft SharePoint Foundation Web Application
so i want to scale out this form to
1 application server
1 web front end server
1 Search server (index server)
1 databse server
here how i scale out to this form
1)here how i move sharepoint server search service to new index server and
2) here how i move Microsoft SharePoint Foundation Web Application to new webfront end server
and in this single server some web appllications are running also how i move these to new wf server
i want to do like this because i want to test service pack 2 installation, now sharepoint version is : service pack1
my actual production environment has
2 application servers
2 webfront end servers
2 index servers
1 databae server
so this correct idea to scale out testing environment and test service pack2 installation
adil

Hi Adil,
The link below describes how to scale SharePoint Web Front-End with only web applications and the search query server out of one SharePoint server with all roles running.
http://sharepointsolutions.com/sharepoint-help/blog/2011/02/how-to-scale-out-a-sharepoint-2010-farm-from-two-tier-to-three-tier-by-adding-a-dedicated-application-server/
Now you have two SharePoint server with:
Tier 1 – SharePoint Server dedicated as a Web Front-End (WFE) with only the web application(s) and the search query service running on it
Tier 2 – SharePoint Server dedicated as an Application Server with all of the other service applications running on it, but no web applications or query service
Tier 3 – SQL Server for the databases
Then you would scale out WFE server with web applications from tier1. Now please install a new SharePoint server and join it to the existing farm and deploy it as Web Front Server. Enable the relevant services on Web Front servers per the topology picture
below, and stop the services running on the old server.
http://technet.microsoft.com/en-us/library/cc263044(v=office.14).aspx
Regards
Rebecca Tu
TechNet Community Support

The lack of details and customer service.

After less than one month of ownership, my Ideapad K1 power button broke. After talking to a customer service rep (K). She informed me it will have to be returned to Lenovo for repair, which will take about 7 to 10 business days from time of delivery. I asked to speak to a supervisor at which point she puts me on hold and then comes back on the line to tell me the supervisor stated the same thing. At no point did I ask her to confirm this with the supervisor. I asked again to speak to her supervisor, to which she puts me on hold again. The supervisor (R) comes on the line to tell me that the Ideapad K1 will have to be returned for repair. He then transfers me back to K to finalize the return, to which she now informs me I will have to pay for shipping. This is very poor customer service in my view. I will never buy another Lenovo product as long as I live and would advise every one I meet not to buy one either. I was looking at their high end laptops for my corporate deployment, its a shame. Maybe I will be going with DELL as they will send a Tech to my house to perform repairs. I do hope that all customer calls are recorded as I believe someone needs to listen to the lack of professionalism and customer service that both K and R display.
Note from Moderator: Employee name/e-mail/phone removed to protect their privacy per the forum rules.

Hi i had the excact same thing i got the k1 for christmas and now its january and the power button doesnt work ..i never dropped it always put it in its case and there is not a dam scratch on the thing least they could do is pay for shipping there defective product back to them so it can be fixed

My experience in Toshibas product and customer services

Just a warning to people who may be considering purchasing a Qosmio based on my own experiences and the research I have done in the last week.
Toshibas customer service is simply not what it once was and there are 100s of reports of Qosmios of all generations suffering extreme issues just outside of warranty periods.
Ref: Toshiba Qosmio X500-149, Support call reference ********
I am writing to express my frustration, anger and disappointment in Toshibas product and customer services.
I am a Freelance Community Manager, Video Game and hardware reviewer in the video games industry presently looking after 2 communities for 2 employers totalling over 2.5m users, I travel to a lot of trade shows, expos and community meet and greets where I require a laptop suitable of showing the employers products which are usually AAA video games or editing video on the fly for publication to social networking sites.
In January of 2011 my 4 year old Alienware hit that point where it really needed replaced, I opted for a Toshiba Qosmio over the Asus G73 as there was a 300 price difference for near identical spec.
I managed to source a X500-149 at PCWorld the companies flagship model here in the UK paying 1499 for it on January 26th 2011 reduced from 1799.
For the 1st 13 month this laptop performed admirably aside a design issue of the fan guards that I raised on the 16th May 2011 with PCWorld where the heat expelled causes the rear guard plastics to become exceptionally brittle and crack. I evangelised the product to anyone who asked me what laptop and model it was that was running these AAA games in such great detail, something I certainly won't be doing in future.
In early March 2012 it then began randomly locking up requiring a hard reboot this would then suffer issues restarting, reporting Operating system could not be found this would usually point to a fault on the primary HD, disk checking software however reported no errors but this continued to happen which would lead me to suspect the motherboard.
Within a month of this problem starting the left laptop fan began making a horrible screeching noise and had a distinct wobble whenever high RPM's were required and the machine began to often go into thermal shut-down whilst performing my work duties and utilising graphics and higher than idle CPU.
I decided on the 23rd April 2012 that enough was enough and I was going to speak to Toshiba as for this to happen to a flagship laptop that was only just out of warranty was simply unacceptable.
23rd April called to report the issue and was basically told tough luck its out of warranty at this point I also updated my tel numbers with Toshiba as the info was outdated, after expressing my anger at this Toshiba agreed to offer me a extended warranty at a cost of 166.
I was fuming to say the least Toshibas flagship laptop breaks at 14 month old and I am expected to stump up more money. If I was not desperate as the machine is critical to my work I would have returned the machine to PCWorld under the sales of goods act and it not being fit for purpose.
As that course of action would likely lead to legal proceedings, engineer reports and even more delay than just dealing with Toshiba for a repair, against my better judgement I called back at 11am on 24th April paid the 166 and took Toshiba up on the warranty extension, order number ********** again having to provide correct tel numbers as where once again incorrect, immediately after I reported the faults.
Toshiba Support centre on fault reporting where great noting each issue in detail and raised a collection with UPS for the following day.
The evening of the 24th April whilst I was retrieving data from the laptop in preparation for factory resetting it the machine went into thermal shut-down with a very distinct smell of burning chemical/plastic coming from the rear vents.
It took me over 90 minutes to get the machine cool enough to actually reboot and get my data after this I shut it back down and boxed it up not be used again.
I thought the best course of action would be to report this as it was a fair step up from the previous overheating. Wednesday 25th April at around 9am I called Toshiba to report this and was advised this would have to be dealt with by a head office case manager, as the item had become hazardous thus the collection that would take the laptop to the service centre was cancelled.
At this stage the advisor took my contact numbers again and escalated the case to head office advising at that time that I would be called by HO within 24 hrs.
Thursday 26th April 15:31 Well past the 24 hr mark and no sign of a call so I called support again and spoke to a advisor called Jacob. Jacob advise that HO had indeed tried calling on 01670 ******* this number was my old number, this number was the number I had advised twice already was incorrect and had provided both a correct land-line and mobile number 3 times previously. To say I was annoyed was a understatement.
Jacob attempted to contact Chloe Sontag who was looking after my case but the line just rang out so Jacob advised that he had sent an email asking for Chloe to contact myself.
Friday came and still no contact by 15:00 so I called support who once again tried to patch me to Chloe who's number once again just rang out and again an email was sent asking to call me.
No call by 17:30 so I called tech support again and spoke to Ian asking for head offices number so I could call them direct, Ian provided the number yet advised that HO are now closed.
After expressing my frustration with this whole process and just how critical this machine is to my daily working life Ian promised to look into the case on Monday AM and try and expedite actually getting a phone call to at least start the process of having this laptop repaired.
To say I'm annoyed is really a understatement not only has this failure to receive a simple phone call at least delayed the repair by almost a week but it is costing me more and money daily when I spent a large amount on what I imagined would be a great laptop for 3-4 years and believed Toshiba actually had good customer service in the event something did happen.
My best guess is that Chloe is on holiday or is part time or such like as her phone just rings out and if that is the case then I would question why assign a case to her, if she isn't then I would want to know why after 2 additional mails advising that the customer is not happy and to contact them has there been no contact or are your case workers just so overworked with faulty products that they can't manage the workload ??
So far Toshibas inability to produce a product that last as long as you expect it would has cost me 2 days off work that I am having to make up this weekend thus cancelling prior commitments, 166 extended warranty 600 for a HP laptop that I had to go and purchase yesterday 27th April 2012 to actually perform my work on and who knows how much in phone calls by the time this matter will finally be resolved.
I was happy with Toshiba as a manufacturer and of course laptops can have issues however having now researched these issues far to many Qosmio X500 users report severe overheating just after the 12 month period or within it and many state that repair after repair has taken place but still to no avail, this on top of the cracking of the rear heat-sink guards has to be a design fault.
This letter will not arrive with you before I have hopefully had a phone call and my laptop has at least been collected for repair, If I have not had that phone call then I would expect another letter very shortly.
Why have I wrote this letter ? To express my disappointment with just how poor the durability of your flagship laptop is and also at just how poor your customer service are, 1500 is a lot of money in the PC purchasing scheme of things and to expect this quality of hardware and customer service is simply unacceptable.
I expect the repair to be expedited and if like some of the horror storys I have read online parts required will take 4 weeks + then I would expect a replacement laptop, not everyone uses these things for entertainment and whilst the HP I had to rush out and buy with money I didn't really have available can allow me to perform my core duties to the minimum it cannot allow me to perform my duties to my standards, my employers standards or my expectant communities standards.
This has been a really unfortunate series of events as I had been considering the X870 Ivy Bridge based on the Nvidia 670m Qosmio which would release soon and passing this X500 onto my partner but after these events and the fact that the HP laptop had to come out of the money saved for it then I can categorically state that will not be the case and I will instead opt for the Asus G55 or G75.
If this issue cannot be resolved to a satisfactory manner then I will have no option but to seek an independent engineers report as well as printing the myriad of similar reports of these issues on the internet and return the item to PCWorld.
In line with the sale of goods act 1979 a large electrical item has to be of satisfactory quality and fit for purpose for a period of 6 years whilst I wouldn't expect the full 6 years from a laptop I would expect at least 3-4 year especially considering that this is a near 2000 flagship model not a 200 budget model.
This is a action I really do not want to take as it will likely end in small claims court against PCWorld a company that on this occasion has done nothing wrong, I do not believe in punishing those who are not at fault so its a action I really wouldn't be happy with and I'm sure PCWorld one of if not the largest vendor of Toshiba products when you incorporate the rest of the DSG group wouldn't be too pleased with it either.
Frustratingly

So I received my laptop back today after having fans replaced and a good clean as well as the top cover replaced.
Opened the box and took the laptop out 1st thing I noticed was a screw rattling around inside, SIGH!!!!
Plugged the laptop in and attempted to boot it at this point it just cycle through finalisation of windows install and shutdown.
How could a laptop have been tested if it didn't even have windows installed ?
An hour later and I gave up unplugged it and lo and behold it actually booted when on battery only.
I then noticed that the SSD was full, oh wait no it wasn't the head office engineer in his infinite wisdom decided that partitioning a 64GB SSD to 2 drives barely even leaving enough for Windows on the C: and wait for it putting the HDD recovery on the second partition was a good course of action.
So a completely borked install and a screw floating around inside remind me how this particular engineer has a job ??
I spent the next 15 minutes just moving data around and creating and deleting partiitions to fix this mess up.
Grabbed HWMonitor to check temps and at an idle 50c on CPU and 36c on GPU they didn't look too bad,
Installed the Toshiba recommended Nvidia driver a driver I hasten to add that was released in 2010 as Toshiba have not updated the drivers for their flagship series laptop since then, They are happy to take your 1643 that the unit cost but then don't expect support for it.
Anyway that aside I then installed 1 of the games I work on and began to run the machine through our benchmark software wooooosh the temps shot up to 90c+ on both CPU and GPU and remained at this temp for the duration of the benchmark never quite triggering thermal shutdown, I then loaded into a warzone for further testing and sure enough half way through it the machine shut down due to thermal shutdown.
I then uninstalled the toshiba driver and tried a NVidia one sure enough as others have advised actual Nvidia drivers seem worse and thermal shutdown came so much earlier.
I have been to PCWorld today to begin proceedings of returning outside of warranty due to not being fit for purpose or of suitable quality. This is costing me a further 60 and at least 2 weeks more without a proper machine and will likely result in me getting about 1300 back from PCWorld.
So lets do the math on just what this will have cost me by the time its finished.
1634 Original purchase
166 Extended Warranty
600 Backup Laptop whilst this was away for a month
60 outside of warranty assessment
50 phone calls
I will probably receive 1300 back but then 1300 doenst buy me the spec I need for work so I will have to pull out another 300-400 for the required spec so lets add that to the original figures.
A Toshiba Qosmio, Toshibas flagship laptop will have cost me in total 2910 almost double its actual retail price.
I will NEVER buy a Toshiba product again and it will become my lifes mission to let everyone know just how terrible they are.

Bad experience with Verizon Fios Internet and Customer Service

I had an extremely bad experience with Verizon Fios Internet service and I will never use Verizon again.
In August 2014, I called and installed the Verizon Fios Internet and phone bundle. I asked the customer agent several times if I will be charged anything before the installation of the Internet and phone service. She said, 'No, we will only start charging after the Internet and phone are installed at your apartment'. I went to the store and picked up the router and phone and installed it at home by myself. The router did not work. I called Tech support and they said it will take several days for another available agent to come and look into the issue. I decided to discontinue the service and closed the account that same night.
At the end of the month, I received a bill of $80 of activation fee for the internet service. Nothing was ever activated, my internet router did not work, and I got charged an activation fee for a service that I did not even start using. From August to December, I called customer service over 10 times and some of them said they will waive it while the others said it's a non-refundable activation fee. One lady said, 'Ma'am, the activation fee starts when you placed the order, the warehouse received it and packed the router in the boxes....' Isn't that ridiculous? If that's the case, please ask all your customer representative to say a clause before new customers open their account: Are you aware that you will be charged a non-refundable activation fee once you open the account regardless of whether or not you use the service or not.
So after 3 months (November 2014), I decided to get out of all these troubles and paid off my $80 activation fee. They put the bill in the collection agency and I called them and paid the overdue balance. Then in December 2014, I received a statement saying I have a $3.11 overdue balance. The collection agency told me that they will charge me for the whole activation fee and a $3 transaction fee for the transaction. So now Verizon came back and said I owed them the $3 because I paid the collection agency their transaction fee.
I am very disappointed and furious about the whole Verizon operating system. Charging a customer for an activation fee for a service s/he has not consumed or used does not make any business sense. In addition, they do not know how to coordinate with the collection agency on overdue bills. Give the customer a heads-up that they will be charged a transaction fee on top of the overdue balance, and that transaction fee does not count towards clearing the balance.
I have completely lost my confidence in Verizon albeit the many good feedback from my friends.

Hi crystallau52,
Sorry you are having difficulty. An agent with access to your account will reach out to you directly by email, private message in the Forums and/or the billing telephone number on your Verizon account for more information or to help you resolve your issue.

Redirect Printer is not working in windows 2008 R2 Server( Server Running as AD and Terminal Service(both role in single server))

Dear Team
i need solution from Microsoft for the issue;
My infrastructure
- Windows Server 2008 R2 (Role - AD and Terminal Service)- Updated
- Client Machine running with windows 7 pro (Updated)
- Client Using RDP Client to connect Windows 2008 Terminal Session
- All are working fine, but Redirect Printing is not working (Through Windows 7 Pro) ... (HP Laser Jet 1020 plus - attached in Client PC)
- it is working fine from Windows XP
- i was done All terminal setting in both end, also try RDP Login with Administrator User, but issue is not resolve;
What Microsoft can say about the issue;
Thanks & Regards,
VIMAL PRAJAPATI | 09824111686

Have you checked the Print Service log in event viewer?
Here's How.
I have the Microsoft XPS driver on my clients, so I use that fact to my advantage below.
Click Start Button/Administrative Tools/Remote Desktop Services/Remote Desktop Services Manager on the RDSH server
Click the Sessions tab. PC’s are listed Under Client Name by their computer name. Take Note of the corresponding
ID. We will use this to locate the Printer information in the Event Log.
In the Event Log open Application and Services Logs/Microsoft/Windows/Print Service/Admin/ and Find the Event ID 823 entry that has the corresponding ID from the sessions tab you previously noted.
This Event Log Entry is created at Logon and you can only get the session ID when they are logged in.
This tells you what client printer was mapped for the client. The name that appears is the name of the Printer that was set on the client when the printer was installed.
See if you see any errors here.
If you see Event Id 823 with the following message “The default printer was changed to Microsoft XPS Document Writer,winspool,Ne00:. See the event user data for context information.” Twice in a row with no other messages in between, and the first occurs
at the time the user logged in, then their printer was not properly redirected.
You see the Microsoft XPS driver mapped for each session prior to Easy Print redirecting the client machine’s Default Printer.
Since your printer is the HP 1020 I would bet the driver on the client does not work with Easyprint. I would try the the HP Universal Print Driver or the driver for a printer that is very close, like the HP 1018.
Thanks,
Jeremy

Is there an EASY way to submit podcasts to the itunes store? i've tried creating podcasts in garageband, then somewhere after wordpress itunes doesn't recognize the feed. my process has been (i am open to suggestions for other free and EASY services/me

is there an EASY way to submit podcasts to the itunes store? i've tried creating podcasts in garageband, then somewhere after wordpress itunes doesn't recognize the feed.
my process has been (i am open to suggestions for other free and EASY services/methods):
garageband : create & edit audio. add 1400x1400 image.
share to itunes.
drag file to desktop.
upload .m4a file to google drive.
create a link post in wordpress using "podcast" tag & create "podcast" category.
click on "entries rss" in wordpress, which takes me to the rss subscribe page (which is basically just my wordpress address with "/feed" at the end.
i copy this url.
go to itunes store > then "submit a podcast"
itunes gives me the error message "we had difficulty downloading episodes from your feed."
when i try to subscribe to my podcast in itunes, it does, but gives me no episodes available.
i went back into wordpress and changed settings/ reading settings to : "full text" from "summary"
still the same error message.
i added a feedburner step after wordpress but got the same errors. i don't think i should have to add feedburner.
wordpress seems to be encapsulating the rss, what am i doing wrong?
this so much easier when you could go directly from garage band to iweb to mobileme; i miss those apple days (also idisk).

if anyone has a super EASY process, i would LOVE to know what it is. EASY, meaning no html and also free. there are many free online storage systems available, many of which i currently use. the above process was just me trying to figure it out, if you have an easier method, please share. thank you so much!

I have an iphone 2g unlocked for tmobile. For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day. It can't find tmobile on my phone?

I have an iphone 2g unlocked for tmobile. For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day. It can't find tmobile on my phone for some reason but for 2 years previous it could no problem? tmobile says it is a problem with my phone and not their service.
Any ideas what to do?

I would just explain that this just started happening, that nothing has changed on the phone, that it is an original iPhone and I wondered if they are implementing a change in coverage with their Edge network in my area.
If you restore your phone, you will be given an option to back up your phone at the beginning of the process (see step 6 here: http://support.apple.com/kb/HT1414). You will be given the option to restore to that backup at the end of the restore process. Your messages are stored in the backup so restoring to the backup will return the messages to your phone. Be sure to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts somewhere before restoring your phone as these sometimesget lost in the restore process.

NetMsmqActivator and NetPipeActivator Services

Similar Messages

Maybe you are looking for