Netweaver 04s - Use of two structures in the query craeted dump

I have used two structures in a query, The same query works fine in current BW 3.5 system but in BI 7.O sandbox (copy of prod), it dumps out.
When I check the query, it does give these message (same as in PROD, where it runs without a problem).
- Different hierarchies are used for characteristic Cons Group
- Number variable ZFV_HTES cannot be replaced.
- Fiscal year variant is to be specified for key figure Cumulative (YTD) Value in Group Currency

Hi Rakesh.
Did you get a satisfactory outcome to this problem? Does the current patch of Netweaver 04S cover it?
Would appreciate your reply, please.
Patrick

Similar Messages

BRAIN416 InfoObject 1KYFNM is used in both structures of the query

Hi Expert,
I have some problem with MDXTEST on BW 3.5 which i select multiprovider to generate MDX Staement but it goes to ABAP Debugger "CX_RSR_PROG_ERROR" and message BRAIN 416 information said "InfoObject 1KYFNM is used in both structures of the query".
Anyone please explain me what should i do????
Thank you for your help
=SJ=

Dear RajNi,
In This Multiprovider A, i use only 1 infoset which only 1 ODS B.
I'm so confuse because i create new ODS like ODS B and do step like Multiprovider A.
Please help me if you have ever seen like that.
Many thanks
=SJ=

InfoObject 1KYFNM is used in both structures of the query

I am getting the error message - "InfoObject 1KYFNM is used in both structures of the query", while executing the query. Can you please help me remove this error and proceed with the query execution?
Thanks and Regards,
Sachin Kalani.

Hi Sachin,
As the error suggested, make sure that u have used that KF only once in ur Query definition.
Regards,
Rajkandula

I own an account on iTunes two years ago, almost always used it two days ago, the account stops working do not know why when I open the account Italpin reset your password and resend the email to and I did not receive any Klnh aftermarket tried a lot and

hi
I own an account on iTunes two years ago, almost always used it two days ago, the account stops working do not know why when I open the account Italpin reset your password and resend the email to and I did not receive any Klnh aftermarket tried a lot and Amaisalna something please help

CHANGING APPLE ID/EDIT ACCOUNT INFORMATION/CHANGE ITUNES COUNTRY
Tap Settings / iTunes & App Stores, then tap the Apple ID signed in. Sign out of the current Apple ID account and then sign in with another account or create a new Apple ID http://support.apple.com/kb/HT2731?viewlocale=en_US
To edit account information tap Settings / iTunes & App Stores / Apple ID: / View Apple ID
To change your iTunes Store country, sign in to the account for the iTunes Store region you would like to use, tap Settings/iTunes & App Store/Apple ID/View Apple ID/Country/Region
Read this article for information http://support.apple.com/kb/HT1311

Using several global structures in one query?

Hello Together,
I want to use several global structures in a query and group them for instance in the rows. I have tried it out, and it does not seem to be possible.
Any ideas- can I overgo this problem somehow?
Thanks,
Elisabeth

Hi Elisabeth,
This should help:
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a5632e09411d2acb90000e829fbfe/content.htm

The structure in the query

HI,BW experts, I have a question about the structure of the query :is there only one key figure in the query?in my query ,i have a key figure structure already, could I create another key figure structure,and how to ?
Thanks for your help.

Hi Cindy
If your query already has a structure then why you want to create a new one? add new key figures to the exisiting structure.
If you have to create new structure for key figures then
GO to Query change in Query designer & in Columns section do right mouse click and select structure. This will add new structure and then you can add new key figures to that if you need.
Hope this helps
Regards
Pradip

Copy existing structure in the query

Hello,
I have couple of existing structures in the query, my requirement is I need to create a new structure similar to the existing stricture.
Is there anyway to copy the existing structure.
Please help me.
Thanks,
John

Hi Roberto
I did like this,
I have chosen save as option by right clicking the structure and provided tech name and descriptions. It created new structure with the existing fields.
Thanks a a lot for your help.
Regards,
John

How can i reuse a structure in the query designer in 3.5

Hi all,
we are using the version BW 3.5, now how can i reuse a structure made int he query designer, because i need it in another query, i did the structure and put it a technical name and save, help guys

HI Richard,
Create a Structure in Rows/columns and save As it, then in the left Panel of the Query Designer you can see three Folders
1) Structures
2) Keyfigures
3) Dimensions
then Expand the structures Folder, there you can find your saved structure, Structures are 2 types
1) With Key figures
2) Without Key Figures
If you have the key figures in your saved structure, then you can find it in the subfolder of with Keyfigures, else in the other folder.
Now you can use this structure by draging in all the queries which are on the same InfoProvider (CUbe. MultiProvider)
Regards
ReddY A

Navigation Attribut is not shown in two rows in the Query

Hello,
we are using a multiprovider with the infoobject 0material. In the multiprovider we use a navigation attribut MH_PR_ST of 0material.
Normally, the query rows should show the material number and the corresponding attribut MH_PR_ST, but in some materials in the multiprovider exist some rows where the attribute is shown correctly from the master data table and in some rows the attribute is not shown.
Therefore in the query two rows are shown:
Material No. MH_PR_ST Key Figure
4711           A                    10
4711           #                       5
Sum                                  15
With all other navigation attributs there is only 1 row.
Do you have any good ideas?
Thank you very much + best regards,
Ilona

Hi,
Assuming the second row comes from one of your basic cube; since it looks that 0MATERIAL is populated (it is coorectly identified), ensure that the identification of the nav 0MATERIAL__MH_PR_ST is done properly in your multiprovider.
hope this helps...
Olivier.

BW 7.0 - display of the global structures in the query designer

Hi colleagues,
When I open the gobal structures of an infoprovider in the query designer, the system shows me all levels of the structures; that is not clearly arranged.
It would be better, the system would show allways only the next level.
Is there any idea ?
regards
Dieter Gerl

Hi,
I can think of three possibilities for a solution.
1. Store the name of the required table in a config table and select at runtime
2. use an 'IF' or 'CASE' statement to deterimine which system you are currently in and then place the required varible within this statement.
3. Preferred solution: use a Field Symbol to assign the table at run-time, this way no errors will occur and your program will compile.
There are many examples of FIELD SYMBOLS on SDN and even the F1 help in SAP.
regards,
CH

Two questions about the query and lsmw .

Hi Experts ,
Could you tell me how to download the query to local driver ? is it possible to do that ?
I hear somebody introduce lsmw this t-code . it can transfer the data from non-sap/r3 system ? has somebody can fully expain this t-code ?
Many thanks !!!
Best Regards,
Carlos Z

Hi,
      LSMW Step by Step Guide: Legacy System Migration Workbench is an R/3 Based tool for data transfer from legacy to R/3 for one time or periodic transfer.
Basic technique is Import data from Spreadsheet / Sequential file, convert from source format to target format and import into R/3 database. LSMW not part of standard R/3, if we need this product email [email protected]
Advantages of LSMW:
    Most of the functions are within R/3, hence platform independence.
   Quality and data consistency due to standard import techniques.
   Data mapping and conversion rules are reusable across projects.
   A variety of technical possibilities of data conversion.
   Generation of the conversion program on the basis of defined rules
   Interface for data in spreadsheet format.
   Creation of data migration objects on the basis of recorded transactions.
   Charge-free for SAP customers and partners.
Working With LSMW:
Use TCODE LSMW
Objects of LSMW:
Project   ID with max of 10 char to Name the data transfer project.
Subproject   Used as further structuring attribute.
Object   ID with max of 10 Characters, to name the Business object .
Project can have multiple sub projects and subprojects can have multiple objects.
Project documentation displays any documentation maintained for individual pop ups and processing steps
User Guide: Clicking on Enter leads to interactive user guide which displays the Project name, sub project name and object to be created.
Object type and import techniques:
Standard Batch / Direct input.
Batch Input Recording
      o If no standard programs available
      o To reduce number of target fields.
      o Only for fixed screen sequence.
    BAPI
    IDOC
      o Settings and preparations needed for each project
Preparations for IDOC inbound processing:
    Choose settings -> IDOC inbound processing in LSMW
    Set up File port for file transfer, create port using WE21.
    Additionally set up RFC port for submitting data packages directly to function module IDoc_Inbound_Asynchronous, without creating a file during data conversion.
    Setup partner type (SAP recommended US) using WE44.
    Maintain partner number using WE20.
    Activate IDOC inbound processing.
    Verify workflow customizing.
Steps in creating LSMW Project:
    Maintain attributes choose the import method.
    Maintain source structure/s with or without hierarchical relations. (Header, Detail)
    Maintain source fields for the source structures. Possible field types C,N,X, date, amount and packed filed with decimal places.
    Fields can be maintained individually or in table form or copy from other sources using upload from a text file
    Maintain relationship between source and target structures.
    Maintain Field mapping and conversion rules
    For each Target field the following information is displayed:
      o Field description
      o Assigned source fields (if any)
      o Rule type (fixed value, translation etc.)
      o Coding.
      o Some fields are preset by the system & are marked with Default setting.
    Maintain Fixed values, translations, user defined routines Here reusable rules can be processed like assigning fixed values, translation definition etc.
    Specify Files
      o Legacy data location on PC / application server
      o File for read data ( extension .lsm.read)
      o File for converted data (extension .lsm.conv)
    Assign Files to defined source structures
    Read data Can process all the data or part of data by specifying from / to transaction numbers.
    Display read data To verify the input data being read
    Convert Data Data conversion happens here, if data conversion program is not up to date, it gets regenerated automatically.
    Display converted data To verify the converted data
Import Data Based on the object type selected
    Standard Batch input or Recording
      o Generate Batch input session
      o Run Batch input session
    Standard Direct input session
      o Direct input program or direct input transaction is called
BAPI / IDOC Technique:
    IDOC creation
      o Information packages from the converted data are stored on R/3 Database.
      o system assigns a number to every IDOC.
      o The file of converted data is deleted.
    IDOC processing
      o IDOCS created are posted to the corresponding application program.
      o Application program checks data and posts in the application database.
Finally Transport LSMW Projects:
    R/3 Transport system
      o Extras ->Create change request
      o Change request can be exported/imported using CTS
    Export Project
      o Select / Deselect part / entire project & export to another R/3 system
    Import Project
      o Exported mapping / rules can be imported through PC file
      o Existing Project data gets overwritten
      o Prevent overwriting by using
    Import under different name
    Presetting for Inbound IDOC processing not transportable.
Regards

Using an "EXISTS" test in the QUERY parameter for an expdp

Has anyone successfully used EXISTS in the QUERY parm during an export datapump? I can get IN to work, but not exists:
Works:
tables=fred.export1
directory=dpump_dir_dev
dumpfile=expdpdev_export_test2_20101216.dmp
logfile=expdpdev_export_test2_20101216.log
query=export1:"WHERE state in (select state from fred.export2)"Doesn't work
tables=fred.export1
directory=dpump_dir_dev
dumpfile=expdpdev_export_test4_20101216.dmp
logfile=expdpdev_export_test4_20101216.log
query=export1:"WHERE exists (select * from fred.export2 where fred.export2.state = fred.export1.state)"Oracle unhappy:
Processing object type TABLE_EXPORT/TABLE/TABLE
ORA-31693: Table data object "FRED"."EXPORT1" failed to load/unload and is being skipped due to error:
ORA-00904: "FRED"."EXPORT1"."STATE": invalid identifier
. . .I tried "where export2.state = export1.state)" and that returned the same error
It's like Oracle is aliasing the table or something, such that when I try to reference it in the WHERE clause of the subquery, it can't recognize it. Any ideas on another way of writing the EXISTS test? I can use IN, but in some cases that might be a list of values over 500,000 items long. Looks like an EXISTS runs faster as a SELECT statement, so I thought the same might be true during the datapump process.
--=Chuck

Hi,
It looks like boolean expression in query does not work in expdp where as it works for in clause as in that case it is referring to export table column and matching it to the value from other table.
"where export2.state = export1.state)" also will not work as you are only exporting export1 table so it does not have references to export2 table (as there is no select for export2 table)
My 2 cents
Regards

Problem to get ResultSet when it is used a Date type in the query condition

hello ,
I having a bit of nightmare getting a ResultSet how result of one simple Query for a table when the condition WHERE involve a Date type.
To change the String value in a date to use in the query condition, I tried both:
String strDate = "dd/mm/yyyy";
(1.) java.sql.Date sqlDate = new java.sql.Date(strDate.getTime() )
(2.) SimpleDateFormat formatter = new SimpleDateFormat(strDate) ; sqlDate = formatter.parse(strDate);
and finally I use this code to get the ResultSet:
sql = "SELECT * FROM myTable Where (idCli = " + cd_Cli + " And dateReg = " + sqlDate + ")";
statement = connection.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_READ_ONLY);
resultSet = statement.executeQuery(sql);
boolean ok = resultSet.last();
totNumberOfRegistration = resultSet.getRow();
But In both the cases I get a empty resultSet.
I shoul like if someone would look my code to say me where it is the mistake...
thank you
tonyMrsangelo
P.S. I tryed using PrepareStatement too to get the ResultSet, but in that case I couldn't use the ResultSet because executing the statement resultSet.last() I get the error: "Result set type is TYPE_FORWARD_ONLY"

In a database like Oracle, you need to use a function like TO_DATE; other databases may have something similar.
However, the proper way to do this is to use a PreparedStatement. Then you can say
PreparedStatement ps = conn.prepareStatement("update SOMETABLE set SOME_DATE=? where SOME_ID=?");
ps.setDate(1, new java.sql.Date(someJavaUtilDate.getTime()));
ps.setInt(2, theId);
ps.executeUpdate();

Show all the structure in the Query

Hi people,
I would like to know if there is some way to show all the structure I created by hierarchy to my query, enven if some nodes there isn´t any data.
I have configurated to show only the lines there is amount. It means it won´t show the lines that have zeros.
But the structure (all of the nodes) I would like to show, include that one there aren´t any datas.
Thanks in advance,
Rosana.

Jaya,
You are 10. It worked!.
I only will leave opened this request yet because I would like a new suggestion.
For exemple, I have the hierarchy but on the side "colum" I already have a structure where is restricted by data because it is a report "Year to Date".
On this case, is it possible to do something to show all the structure of the hierarchy?
Ps.: If it is necessary close this request and open a new one, you can tell me ok?
Thanks a lot,
Rosana.

How to view/use 0costcenter txt fields in the query

Hi,
How to use the fields defined in the text table (/BI0/TCOSTCENTER) of 0costcenter. I want to be able to include them as fields in the query I am configuring and I don't see them available for choose from in the Query Designer. The cube that I am using is CO-OM-CCA(cost and allocation), standard cube from the business content. Do I need to include them separately in the dimension of the cube first to be able to use them in the report? The fields that I want to use are DATETO, DATEFROM, CO_AREA and COSCENTER. I assume description is already available in the display tab of the query designer tool.
Thanks,
Sharon

Hi,
In the Query designer, select the characteristics Cost center in the Rows/ Columns tab.
On the display properties tab there are display options available,
1. Key - Will display cost center number only
2. Key and Text - Will display the CC number and the associated text.
Selecting the second option will solve your problem.
Also check for the same in Business Explorer Tab of the info object.
Regards,
Shyam.

Netweaver 04s - Use of two structures in the query craeted dump

Similar Messages

Maybe you are looking for