Netweaver CE 7.1 and Windows 2008
Hi everybody,
I'm trying to install netweaver CE 7.2 on a Windows 2008. Do you know if there is any incompatibility? I'm having lots of trouble installing it... On a Windows 2003 I have no problems....
Best regards,
LMA
Refer: https://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/00846edd-355b-2b10-f38c-df94ec96eb74
System Requirements :
Windows XP Professional (Service Pack 2) or Windows 2003 Server (Service Pack 1), english only
This version runs on Windows XP (SP2) with password accounts and Windows Server 2003 (32bit), english only
Hope this helps!
Similar Messages
-
ACS Se 4.2.1.15 patch 4 and Windows 2008 R2
Hi, Can anyone advise whether ACS Se and Remote Agent 4.2.1.15.4 supports Windows 2008 R2 please. Thank you.
Hi,
ACS 4.2.1.15 does not support windows 2008 R2.
ACS 5.2 supports the same.
It is a bug CSCtg12399 which is resolved on ACS 5.2.
The release notes of ACS 5.2 describing the same.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/release/notes/acs_52_rn.html
The following link gives details of the ACS 4.2 and Windows 2008 compatibility.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/release/notes/ACS42_RN.html#wp100949
Hope this helps.
Regards,
Anisha
P.S.: please mark this thread as answered if you feel your query is answered. Do rate helpful posts. -
SAP Conversion Agent for PI 7.1 EHP 1 and Windows 2008 Support
Hello
I have read that some people were able to run SAP Conversion Agent on a PI 7.1 EHP1 Installation on Windows 2008 Sever. But in the Product Availability Matrix there is no support for 2008 yet.
In the SAP Library (http://help.sap.com/saphelp_nwpi71/helpdata/en/43/fc39c16bfb025ee10000000a1553f7/frameset.htm) under the release notes for SAP Conversion Agent there is still version 8.5, but when I install the actual Support Package I have Conversion Agent 8.6 running and according to information on the informatica.com site this version is running under 2008!
Has anybody clear and actual information about which OS the newest SAP Conversion Agent for PI 7.1 EHP1 supports? Or has anyone experiance on Conversion Agent and Windows 2008 Server?
Thanks
ChristophHi Mark
Thanks for your reply! Fact is that in the actual Package (SP06) the version of Conversion Agent Engine supplied is not 8.5.5 as in the SAP Note mentioned, it is version 8.6.0:
C:\Documents and Settings\pi1adm>CM_console -v
Engine-Version: 8.6.0(Build:30)
Engine-Syntaxversion:4.00.10
I will oben a ticket for that ...
Regards
Christoph -
WIndows 7 and Windows 2008 authentication failed in Windows 2003 Domain
Hi,
We have Domain with Windows 2003 and recently Windows 2008 Doamin controllers also added.
We are facing authentication failure for Windows 7 and Windows 2008 Domain members when user is trying to login.
Schema Master is on Windows 2003 and remaining roles on Windows 2008 Domain controller.
Windows XP clients login is working fine.
Problem si for Windows 7 and Windows 2008 Domain members login.
Any hint/solution will be really great help.
Pls share if you have any solutions.
Regards:MaheshHi,
I found some more details about issue
Below are the events getting generated. It looks like due to encryption mismatch with Windows 2003 Domain and Windows7 and Windows 2008 clients. However i am looking for solution if someone tested this case.
Event Type: Error
Event Source: KDC
Event Category: None
Event ID: 26
Date: 08/06/2014
Time: 9:41:04 AM
User: N/A
Computer: AAAAAA
Description:
While processing an AS request for target service krbtgt, the account ADDADA$ did not have a suitable key for generating a Kerberos ticket (the missing key has an ID of 2). The requested etypes were 17. The accounts
available etypes were 23 -133 -128 3 -140.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Event Type: Error
Event Source: Kerberos
Event Category: None
Event ID: 4
Date: 08/06/2014
Time: 9:34:17 AM
User: N/A
Computer: AAAAAA
Description:
The kerberos client received a KRB_AP_ERR_MODIFIED error from the server ADADDFHDHDH$. The target name used was . This indicates that the password used to encrypt the kerberos service ticket is different than that on the
target server. Commonly, this is due to identically named machine accounts in the target realm (DOMAINNAME.COM), and the client realm. Please contact your system administrator.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Regards:Mahesh -
Hello,
We've had SPnego integrated authentication for Windows working with our EP for sometime.
Our company is moving to W2k8 domain and dc's (kdc's) for this question.
When one of our kdc functional servers has been replaced, it appears that the SPNego authentication function has started to fail upon restart of the Java\EP system.
Can anyone provide any info as to what might need to change for the continued use of the SPNego authentication against a W2k8 kdc?
Upon pointing the java\ep system back to a w2k3 kdc the implementation continues to work. So it looks to be windows version related.
Appreciate any help. Not seeing much from SAP areas possibly related to this?
RickHi,
>the Windows 2008 R2 server does not support DES encryption by default. So you have to enable it manually
This workaround works but is not secure : DES has been abandonned for default because it has been conpromised.
The real solution is to use the new SAP SPNEGO/Kerberos implementation which is able to use RC4 or AES.
If you cannot because of an unsufficient relaase or SP level, you have to do like we had to do in my company : buy a third party product which is able to use RC4 even for Netweaver 7.0 J2EE.
The security team has forbidden the use of DES in my company...
Regards,
Olivier -
Below is my question around the OIM AD connector version 9.1.1 and its support with Windows Server 2008 R2.
From the AD Connector Documentation I can see that Active Directory 2008 is a supported target system by the OIM connector v9.1.1. There is no mention of Windows 2008 R2 at all in this document: http://download.oracle.com/docs/cd/E11223_01/doc.910/e11197.pdf
My question is: Is Active Directory on Windows Server 2008 R2 supported as a target system by v9.1.1 of the AD User Management Connector. If not what version of the AD User Management connector do we need to upgrade to (9.1.1.4 or 9.1.1.5)?
I am crossing my fingers for the answer to be that v9.1.1 does support Windows Server 2008 R2 to save us the pain of an upgrade.
Thanks..It depends on if you mean "officially supported" or "will work".
On the officially supported line AD 2008 R2 is sometimes considered different enough to need a separate certification. Check your connector release notes and if that doesn't include AD 2008 R2 open a support case with Oracle to get the official ceritification schedule.
With 99% likelyhood it will work fine but you may end up in a non supported state which may or may not be acceptable in your organization.
Best regards
/martin -
Hi,
Any ideas about the best practices for the migration/upgrade reflected with the below question?
I have a source EBS11i 11.5.10.2 running as a two tier configuration ( apps tier on server ora10 on Windows 2003, DB tier 11.2.0.2 on server ora1 on Windows 8 R2. Can I use the Note 1377213.1 for a migration to a two tier configuration ( apps tier on server T10 running Windows 2008 R2 and EBS 12.2.3 and DB tier running 11.2.0.4 on Windows 2008 R2 )? What alternative approach could you suggest? As far as I know EBS11i is not certified on Windows 2008 R2 and R12.2.0 is not certified on Windows 2003.Yes you can by following "Application Tier Upgrades and Migrations" section -- Install 12.2 apps tier on 64-bit Windows and proceed with the upgrade.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.2) for Microsoft Windows x64 (64-bit) (Doc ID 1330706.1)
Thanks,
Hussein -
Problems setting up WNA with OAS 10.1.2.0.2 and Windows 2008
Hi,
I am trying to set up WNA with an OAS 10.1.2.0.2 in a RHEL 4 platform. I have been able to configure Synchronization and Windows External Authentication following these steps:
http://download.oracle.com/docs/cd/B14099_19/idmanage.1012/b14085/odip_actdir003.htm#i1010999
I have also tried to configure WNA without success with those steps.
The scenario is here:
* OAS 10.1.2.0.2 infra in a RHEL 4
* Windows 2008 SP1 (only i use AD from it)
* Windows XP (client) that should be able to log in without problems when WNA is configured
How can make it work? I haven´t find any useful documentation
Thanks,
MaxCheck these out:
http://www.freeoraclehelp.com/2011/09/oid-integration-with-ms-active.html
http://www.freeoraclehelp.com/2011/09/enable-ssl-for-oid-instance-of-oracle.html
http://www.freeoraclehelp.com/2011/09/oracle-password-filter-to-sync.html -
Problems with RH 8 and Windows 2008 64-bit servers with IIS7?
I have been informed that my company's servers are being upgraded to Windows 2008 64-bit servers with IIS7, from Windows 2003 & IIS6. Probably will be online in April 2011.
I have a project created using WebHelp, RoboHelp HTML v5. I have RoboHelp HTML v8 (haven't had a chance to use it yet). We are currently using IE7 on XP. Does anyone have any info on issues with RoboHelp v8 WebHelp projects running on Windows 2008 64-bit servers & IIS7 that I need to be concerned about? I thought I should convert the project developed using RH 5 to and RH 8 project, then FTP it to the new server when it becomes available.
Any helpful info would be much appreciated.
Thanks,
AldenAcrobat 8 is not certified for Win7, particularly the x64 version. If you got the installation to go, the first step is to update AA8 to at least AA8.2. The x64 with XP required at least AA8.2 and I suspect that has not changed. I would suggest updating to the latest, either from the help menu (until no more updates are available) or by downloading the updates from the adobe.com>downloads page. For the latter, download ALL updates after your current version and install them in ORDER. They are not cummulative in most cases. You only need to reboot after the final update. The updates may get you going. If not, you may simply have to upgrade to AA9 or search for what others have been able to do in your situation.
-
Please help me! The code below creates perfect output file son windows 7 and 2012 but on windows 2008 and win 2003 the generated images are corrupted without generating any exception during the process.
Both win 2008 and win 2003 are up to date. What do I have to install? Some hotfix? Please help me I'm stuck.
public void appendTiffs(string tiff1inputFilePath, string tiff2inputFilePath, string outputFilePath)
Stream imageStreamSource = null;
try
//Prepare encoders:
System.Drawing.Imaging.ImageCodecInfo encoderInfo = getEncoderInfo("image/tiff");
System.Drawing.Imaging.EncoderParameters encoderParams = new System.Drawing.Imaging.EncoderParameters(2);
System.Drawing.Imaging.EncoderParameter compressionEncodeParam =
new System.Drawing.Imaging.EncoderParameter(System.Drawing.Imaging.Encoder.Compression, (long)System.Drawing.Imaging.EncoderValue.CompressionLZW);
System.Drawing.Imaging.EncoderParameter saveEncodeParam =
new System.Drawing.Imaging.EncoderParameter(System.Drawing.Imaging.Encoder.SaveFlag, (long)System.Drawing.Imaging.EncoderValue.MultiFrame);
encoderParams.Param[0] = compressionEncodeParam;
encoderParams.Param[1] = saveEncodeParam;
int numberOfPages = getNumberOfPages(tiff1inputFilePath);
MemoryStream byteStream;
imageStreamSource = new FileStream(tiff1inputFilePath, FileMode.Open, FileAccess.Read, FileShare.Read);
System.Drawing.Bitmap sourceBitmap = (System.Drawing.Bitmap)getTifPage(imageStreamSource, 0, out byteStream);
System.Drawing.Bitmap outputBitmap;
outputBitmap = (System.Drawing.Bitmap)System.Drawing.Image.FromStream(byteStream);
outputBitmap.Save(outputFilePath, encoderInfo, encoderParams);
//For subsequent pages, prepare encoders:
saveEncodeParam =
new System.Drawing.Imaging.EncoderParameter(System.Drawing.Imaging.Encoder.SaveFlag, (long)System.Drawing.Imaging.EncoderValue.FrameDimensionPage);
encoderParams.Param[1] = saveEncodeParam;
for (int i = 1; i < numberOfPages; i++)
sourceBitmap.Dispose();
byteStream.Close();
byteStream.Dispose();
sourceBitmap = (System.Drawing.Bitmap)getTifPage(imageStreamSource, i, out byteStream);
sourceBitmap.Save(byteStream, System.Drawing.Imaging.ImageFormat.Tiff);
System.Drawing.Bitmap tmpOutputBitmap = (System.Drawing.Bitmap)System.Drawing.Image.FromStream(byteStream);
outputBitmap.SaveAdd(tmpOutputBitmap, encoderParams);
sourceBitmap.Dispose();
byteStream.Close();
byteStream.Dispose();
imageStreamSource.Close();
imageStreamSource.Dispose();
imageStreamSource = new FileStream(tiff2inputFilePath, FileMode.Open, FileAccess.Read, FileShare.Read);
numberOfPages = getNumberOfPages(tiff2inputFilePath);
for (int i = 0; i < numberOfPages; i++)
sourceBitmap.Dispose();
byteStream.Close();
byteStream.Dispose();
sourceBitmap = (System.Drawing.Bitmap)getTifPage(imageStreamSource, i, out byteStream);
sourceBitmap.Save(byteStream, System.Drawing.Imaging.ImageFormat.Tiff);
System.Drawing.Bitmap tmpOutputBitmap = (System.Drawing.Bitmap)System.Drawing.Image.FromStream(byteStream);
outputBitmap.SaveAdd(tmpOutputBitmap, encoderParams);
//Finally flush the file:
saveEncodeParam = new System.Drawing.Imaging.EncoderParameter(System.Drawing.Imaging.Encoder.SaveFlag, (long)System.Drawing.Imaging.EncoderValue.Flush);
encoderParams = new System.Drawing.Imaging.EncoderParameters(1);
encoderParams.Param[0] = saveEncodeParam;
outputBitmap.SaveAdd(encoderParams);
finally
imageStreamSource.Close();
imageStreamSource.Dispose();I solved the problem. The following code works also on 2003 and 2008.
public void appendTiffs(string tiff1inputFilePath, string tiff2inputFilePath, string outputFilePath)
FileStream fileStream = new FileStream(tiff1inputFilePath, FileMode.Open, FileAccess.Read);
ImageCodecInfo tiffCodecInfo = getEncoder(ImageFormat.Tiff);
Encoder saveEncoder;
Encoder compressionEncoder;
EncoderParameter saveEncodeParam;
EncoderParameter compressionEncodeParam;
EncoderParameters encoderParams = new EncoderParameters(2);
saveEncoder = Encoder.SaveFlag;
compressionEncoder = Encoder.Compression;
saveEncodeParam = new EncoderParameter(saveEncoder, (long)EncoderValue.MultiFrame);
compressionEncodeParam = new EncoderParameter(compressionEncoder, (long)EncoderValue.CompressionLZW);
encoderParams.Param[0] = compressionEncodeParam;
encoderParams.Param[1] = saveEncodeParam;
FileStream outputStream = new FileStream(outputFilePath, FileMode.Create, FileAccess.ReadWrite);
Image image = Image.FromStream(fileStream);
image.Save(outputStream, tiffCodecInfo, encoderParams);
fileStream.Close();
fileStream = new FileStream(tiff1inputFilePath, FileMode.Open, FileAccess.Read);
saveEncodeParam = new EncoderParameter(saveEncoder, (long)EncoderValue.FrameDimensionPage);
compressionEncodeParam = new EncoderParameter(compressionEncoder, (long)EncoderValue.CompressionLZW);
encoderParams.Param[0] = compressionEncodeParam;
encoderParams.Param[1] = saveEncodeParam;
TiffBitmapDecoder tiffBitmapDecoder = new TiffBitmapDecoder(fileStream, BitmapCreateOptions.PreservePixelFormat, BitmapCacheOption.Default);
TiffBitmapEncoder tiffBitmapEncoder;
int numberOfPages = tiffBitmapDecoder.Frames.Count;
for (int i = 1; i < numberOfPages; i++)
BitmapFrame frame = tiffBitmapDecoder.Frames[i];
System.Drawing.Bitmap bitmap;
using (MemoryStream outStream = new MemoryStream())
tiffBitmapEncoder = new TiffBitmapEncoder();
tiffBitmapEncoder.Frames.Add(frame);
tiffBitmapEncoder.Save(outStream);
bitmap = new System.Drawing.Bitmap(outStream);
image.SaveAdd(bitmap, encoderParams);
fileStream.Close();
fileStream = new FileStream(tiff2inputFilePath, FileMode.Open, FileAccess.Read);
tiffBitmapDecoder = new TiffBitmapDecoder(fileStream, BitmapCreateOptions.PreservePixelFormat, BitmapCacheOption.Default);
numberOfPages = tiffBitmapDecoder.Frames.Count;
for (int i = 0; i < numberOfPages; i++)
BitmapFrame frame = tiffBitmapDecoder.Frames[i];
System.Drawing.Bitmap bitmap;
using (MemoryStream outStream = new MemoryStream())
tiffBitmapEncoder = new TiffBitmapEncoder();
tiffBitmapEncoder.Frames.Add(frame);
tiffBitmapEncoder.Save(outStream);
bitmap = new System.Drawing.Bitmap(outStream);
image.SaveAdd(bitmap, encoderParams);
fileStream.Close();
saveEncodeParam = new EncoderParameter(saveEncoder, (long)EncoderValue.Flush);
encoderParams.Param[0] = saveEncodeParam;
image.SaveAdd(encoderParams);
outputStream.Close();
private ImageCodecInfo getEncoder(ImageFormat format)
ImageCodecInfo[] codecs = ImageCodecInfo.GetImageDecoders();
foreach (ImageCodecInfo codec in codecs)
if (codec.FormatID == format.Guid)
return codec;
return null; -
HUM 1.2 and Windows 2008 - Server
Hello,
it is possible to run HUM with Windows 2008-Server? Problem is: It runns always CWLMS 3.2 and the customer wantes to add HUM. The hardware is not the problem.There is both client and server support for Windows 2008 in Ciscoworks LMS starting with release
3.2 (Common Services V3.3). Please have a look at the following links:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.3/release/notes/cs33rel.html#wp79176
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/overview.html#wp1086601
Regards
Farrukh -
Office 2013 and Windows 2008 R2 SP1 AD RMS
Hi All,
I have installed Windows 2008 R2 SP1 AD RMS service, and it works well with Office 2010/2007, does not however work with office 2013, below is the error I get:
sorry, something went wrong opening information rights management protected content. the request is not supported
I have added the AD RMS cluster URL and the AD RMS licensing URL to the loacl Intranet security zone (http://realercheng.wordpress.com/2013/01/23/office-2013-failed-to-create-and-consume-protected-content-with-connect-to-digital-rights-mangement-services-and-get-template/),
however, I still get the same error.
Does Office 2013 work with Windows 2008 AD RMS, and if it does what is the issue here and how do I go about sort it?
KimaniBobHi,
Im am using server 2008 r2 sp1 and users are using windows 7 enterprise, office 2010 pro. plus. They can see right policy
template with office 2010.
But now I have installed office 2013 pro. plus and added new admx files to new gpo for office 2013 also enabled this policy
"Enter Permission Policy Default Server for Quick Access Toolbar" and this is writing in the policy \\serverhostname But I cant receiving ad rms templates from my outlook?
Is server 2008 r2 sp1 ad rms compatible with office 2013 or am I have to install server 2012 ad rms for office 2013?
How can I fix this problem?
Thanks. -
Windows 7 Enterprise and Windows 2008 R2 RDS
Hello folks,
Using SRSS 4.2 / SRWC 2.2 with Sun Ray Connector Windows Components software installed on the clients.
Our test show amazing screen speed, and full 32 bit colour depth, great flash speed on Windows 2008 R2 RDS but no audio.
Our test using Windows 7 Enterprise displayed fast graphic speed, Windows Aero disabled, no audio and cannot be changed thus the user experience is not pleasant.
Anyone know when this will be addressed as it is crucial for any new deployments and upcoming desktop refreshes.
Thanks!After talking with Sun Support, this is a known bug that is slated to get fixed in the next SRWC patch. No timeline was available for the patch.
Edited by: segfaultcoredump on Jan 14, 2010 9:11 AM -
NWBC 3.0 PL4 and WIndows 2008 R2 Citrix.
I was able to get the SAP NWBC 3.0 client up and running. We knew that the .net framework 3.5 SP1 was included in Windows 2008 R2 but we did not known that you actually need to initialize the feature itself. It seams to be a totally different way to configure this within Windows 2008 R2.
For now the application is working perfectly local on the server itself but we are still suffering with an issue when we like the present it to the clients via Citrix Xenapp 6. The application is starting but at the moment when a user likes to maximize or minimize the whole application is disappeared from the screen. The Citrix session is still running on the back ground but the user doesn't see anything anymore related to this client. Changing the session windows size or color quality didn't help.
Does someone know what could cause this issue?Just wondering if you have resolved this issue?
We have exactly the same problem.
Thanks -
SAP Backup Service SAP 8.8 and Windows 2008 R2 64 Bit
Dear All ( Mr Gordon)
I am facing problem with the Backup Service on windows 2008 R2 64 Bit.
1)The Service starts - There is no Issue
2)THere is no Backup - Even though i schedule it perform the backup
3)EvenLog has a lot of messages - Messages says some Dll are Missing or Corrupt.
COmpletely Uninstalled the Server Tools and Reinstalled back ,still there is error.
PLease help !
Best Regards
DayalDear Dayal,
Thank you for your trust on me. To be honest, I never use SAP Backup Service. This is because: SQL Server provides its own Backup Service. No other vendor can compete with its build in function.
Thanks,
Gordon
Maybe you are looking for
-
How and where can I combine several pdf files?
I have written a Guide Book for Music Teachers in Word, converted it into a pdf file and would now like to insert sheet music files written with Sibelius Notation Program which have also been converted into pdf files, since they are otherwise not com
-
my iCal calendar that I created with the color green keeps changing to purple. no matter how many times I change it to green, it turns it back to purple. Of course this only happens with iCloud and not "from my Mac". Any ideas on how to correct th
-
I cannot install itunes. The error message telss me I need a CD
I am unable to install itunes 10.5. I am asked for the CD to provide a needed file. I cannot uninstall the prior version of itunes.
-
Can't Un/Install QuickTime due to "QuickTime.msi" being "unavailable"
I'm trying to install iTunes version 9, but at the end of the installation it returns an error saying that it can't install quicktime because it cannot uninstall the older version. I have traced this error back to the fact that the unintsall wizard c
-
WR DVD Drive not capable of writing
i have a ThinkPad W520 (4276-37U). In the product spec it says the following regarding the DVD drive "CDRW/DVDRW", which I assume means read / write. I'm trying to burn and ISO image to a DVD. Windows reports that the drive is not capable of