Netweaver Data base instances for Java and ABAP

Hello Experts,
Please help me to understand how the two technology stacks of SAP WAS (Java and ABAP) are configured to use underline data base in Netweaver.
Is it manadatory to have two separate data base schemas, one for ABAP applications and other for Java applications in the Netweaver?
If yes..the any idea about what are those schema differences??
- Rajan

Hello Krishna,
Thanks for the reply.
Is there any way I can access these shemas? Are they the same by structure or there are major differences?
My requirement is to build a common schema out of these two and have the data from these two schemas to be consolidated in the new schema.
Any help will be greatly appreciated.
- Rajan

Similar Messages

SMSY for ERP JAVA and ABAP Stack

Hi Folks - I have installed SAP ERP 6.0 EHP5 in one database called T12. Now there is a need for a Java stack and I have installed the Java stack in another database called J12.
I was able to define the ABAP stack on system landscape and MOPZ is working fine. However, I am not sure how I should go about the Java (J12) instance definidstion on SMSY.
I am using Somlam 7.1 on Oracle Linux system.
ABAP stack is on ERL 6.0 EHP5 and Java stack is Netweaver 7.0 EHP2.
J12 and T12 systems are connected via JCO.
SLD has been defined for both stacks and they are using the local SLD for the SolMan.
Your help is much appriciated.

Sunny - I checked the SLD and It is working fine. There were couple of issues that I fixed. Since I defined the Java system manually I delete it. Hopefully SLD will populate the definition.
In same note, Would it be possible that installing ERP java and ABAP stack on different hosts (stand alone) is causing this issue, especially they are using different Sid's?
I was reading SAP Note 1344564, It states
III.Some Main Instances include other Main Instances (E.g., in SAP
ERP 6.0, Main Instance SAP NW - Enterprise Portal includes SAP NW -
EP Core.). If the including Main Instance is installed, it's not
necessary to mark the included Main Instance(s) for relevance.
Is this mean in SMSY I do not have to define any product for the Java engine? When installing the Java, I had to create the product manually to be able to generate the installation key.
Your input is appreciated.
Edited by: kourosh Ghouchkhani on Nov 22, 2011 1:20 AM

ESS/MSS sso configure between java and abap instance

Dear Gurus,
I want to configure sso between java and abap instance for ESS/MSS. I couldnt find any guide for it, could you please help me gurus ?
Other question is, is there any specific role for ESS/MSS users in JAVA instance. I want to create users and assign this role to them.
Best Regards

Hi Kemal,
Hope you are doing good.
There should be a / in the ITS path before SAP.
Basically the entry that you have mentioned here should be accessible via browser as well. For eg in your case:
http://<its hist name>/sap/bc/gui/sap/its/webgui should be accessible over browser.
I also think you have put in a extra space in "w ebgui". It should be "webgui".
If the connector settings are working, then we can be sure that system connection is fine. You do not need to configure ITS settings.
Also for SSO, refer the SAP note:1083421 and configure the SS0 settings again.
Please run the SSO2 wizard and then make the automatic connection to
the abap server. This will solve any inconsistencies on the server
due to manual interventions.
Most likely reason for the error is that certificates were loaded
manually rather than using SSO wizard.
More help:
<http://wiki.sdn.sap.com/wiki/display/EP/Troubleshooting+SSO+between+AS-ABAP+and+AS-JAVA>
The SSO enabling parameters should be set on the R/3 server.
SSO Logon Ticket-> login/accept_sso2_ticket and login/create_sso2_ticket
More info:
<http://help.sap.com/saphelp_nw04/Helpdata/EN/22/41c43ac23cef2fe10000000a114084/frameset.htm>
Thank you and have a nice day :).
Kind Regards,
Hemanth
SAP AGS

SAP NetWeaver 70 - Java and ABAP VMware Trial.part02.rar CRC error?

HI,
I've downloaded the file:
SAP NetWeaver 70 - Java and ABAP VMware Trial.part02.rar
of SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition
four times and everytime a get a CRC error in the RAR file. Is the file wrong or the download incorrect?
Regards, Edwin Slee

Hi Henry.
Ive downloaded the file again. Now it is called:
SAP NetWeaver 70 - Java and ABAP VMware Trial.part02.tgz
But it is a RAR file.
As you suggested I open the file with WINRAR 3.61 and select
Tools -> repair archive
In the directory a file:is created with the name:
rebuilt.SAP NetWeaver 70 - Java and ABAP VMware Trial.part02.tgz
The WINRAR message box reads:
Detecting archive type...
---> RAR
Build fixed.SAP NetWeaver 70 - Java and ABAP VMware Trial.part02.tgz
Searching for recovery record
---> recovery record not found
Build rebuilt.SAP NetWeaver 70 - Java and ABAP VMware Trial.part02.tgz
Found SLES10SP1_Test_Drive(2)-s002.vmdk
Found SLES10SP1_Test_Drive(2)-s003.vmdk
Found SLES10SP1_Test_Drive(2)-s004.vmdk
Found SLES10SP1_Test_Drive(2)-s005.vmdk
When I open this file with WINRAR again a try to extract
SLES10SP1_Test_drive(2)-s003.vmdk I still get a CRC error, the archive file is corrupted.
I think the error isnt due to the download, because Ive downloaded the file using three different internet connections (8 times now) and all the files are identical, with a CRC error !
Regards, Edwin Slee

Any difference between webdynpro for java and webdynpro for abap ?

Hi all:
   I would like to build one small system in EP.
   I can choose to use webdynpro for java and webdynpro for abap.
   I would like to ask any major difference between webdynpro for abap and webdynpro for java ?
   Is fpm supported in webdynpro for abap ?

Hi,
see this thread,
ABAP Vs JAVA WebDynpro
Regads,
J.Joe

I need a good data base system for both my imac and my PC. Any ideas?

I am a REaltor looking for a good data base software for my company and my agents that is usable with both the Mac computers and the PC's.

That would be FileMaker Pro, they make versions for both PC's and Macs. You can find information at:
http://www.filemaker.com/products/filemaker-pro/

Communicate link between Java and ABAP Stack for https

I have configured https in both the java and abap stacks (we have a double stack configuration). Due to our future configuration I have changed the hostnames to fully qualified hostnames per SAP instructions.
The question I have is does anyone know what RFC destinations or JCo settings I need to change to make https complete?
I have the problem where when I fire off the Integration Builder from within the ABAP stack (SXMB_IFR) I get a straight hostname (no domain name). Where is this configured? Any help is appreciated..

Check the exchange profile (Administratio tab in /rep/start/index.jsp page; you will have to enter it manually since it is throwing error from SXMB_IFR).
Regards,
Henrique.

Corrupt ? : Java and ABAP Trial Version on Linux - VMware Edition

Has anyone been successfull in downloading / running the brand new testdrive "Netweaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition" ?
I tried downloading it twice, but it appears the second file (part2.rar) is corrupt.
unpacking gives a CRC error on file 'SLES10SP1_Test_Drive(2)-s003.vmdk.
Thanks & Best regards,
Jeroen Engelen
SAP Netweaver Technology consultant

Hello all,
You have to follow instruction on this side>
http://www.novell.com/documentation/sles10/esd/ii_sap_testdrive_sles10sp1_vmware1.html
YOu need to download
part1 > which is soft from NOvell called
SAP Test Drive "SLES10SP1VSAP.rar"
Maybe this link help you "http://download.novell.com/index.jsp?product_id=&search=Search&families=2658&version=8161&date_range=&keywords=&sort_by=&x=14&y=7
After donwload from sdn part two
SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition
from sdn Downloads.
YOu need to use VMWARE soft to start up SLES 10 (part1) and after that use SLES to start up SAP.
But here I have problem I can not login to SLES as I don't know passwrod, I was trying to found it at novell web site or SAP without any sucess.
So at this point I am stuck
Here is the same qeustion from Jim Jiang and me
what is user name and password for SLES10 SP1 SAP Version
Hope this give you overview what needs to be done, to start up Trial SAP version
Peter Nechala

CRC failed in Java and ABAP Trial Version on Linux - VMware Edition part02

I download SAP NetWeaver 70 - Java and ABAP VMware Trial and I couldn't install it because part02 rar file has reported a checksum error.
- SAP NetWeaver 70 - Java and ABAP VMware Trial.part02.rar: CRC failed in SLES10SP1_Test_Drive(2)-s003.vmdk. The file is corrupt
Also, I think file SLES10SP1_Test_Drive.vmdk is missing from the archive files.
Could you please, confirm that the archives in the sdn downloads are correct!

I also have the same problem, CRC error:
X:SAPSAP NetWeaver 70 - Java and ABAP VMware Trial.part02.rar: CRC hiba a SLES10SP1_Test_Drive(2)-s003.vmdk-ban. A fájl sérült

Error while creating connection between Java and ABAP

Experts
I am getting the following error message when I am trying to test the connection between JAVA and ABAP systems.
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (s09f71v06.svr.bankone.net:8100)
5. The host name s09f71v06.svr.bankone.net was resolved successfully.
6. The server s09f71v06.svr.bankone.net *could not be pinged* successfully.
I have JAVA and ABAP on the same system. I am trying to establish a connection. I have checked all the settings and they looks fine. I have also pinged from other system to this server and the Ping works fine.
Please do let m eknow where do I need to check for the errros or logs for the above error message.
Appreciate your quick help.
Mahesh

Check the relevant services are test are active on the Backend system through SICF trransaction.
Also make sure that default icm services are running.See note 517484.
More important the connector test in the portal system should work properly,recheck the WAS path etc are correct.
Regards
Ajay

JAVA and ABAP stack support pakages

Hi,
I am new on installation of solution manager server.
I just install solution manager server EHP1 on windows 2003. Now I want to patch my server.
I have abap and java stack on my server. Can I use jspm to upload my new patches for both Java and ABAP stack or I should use SPAM for abap stack and jspm for java.
Thanks Reza

Hello Reza,
Just to clarify, Best practise is to update your kernel to the latest before you start patching in your system.
So download SAPEXE.SAR (Database independent kernel package), SAPEXEDB (Database dependent kernel package) and IGSEXE.SAR (IGS Package) from the SMP. kernel is dependent on your operating system and database and therefore make sure you download the right package otherwise you'll end up in messing up the system.
follow SAPnote # 19466 for help.
Once you are done with the kernel update then patch you Abap stack by SPAM and JAva stack by JSPM.
I hope that makes things clear.
Best Regards
NIraj

Java and ABAP Stack

Hi All,
I am still not clear about role/function of java and abap stack in XI.
Can anybody explain?

Sireesha,
Tha ABAP stack consists of the Integration Server which in turn contains your Integration Engine and Business Process Engine.
The J2EE stack contains the Adapter Engine and your IR and ID run on the J2EE engine.
Most of XI pipelines happens in the ABAP stack.
All messsages picked by the Adapter Framework running on the J2EE engine are passed to the Integration Engine, which does the routing. The mapping program again gets executed on the Java stack and the rest of the pipeline servies are executed again on the ABAP stack and so on.
please go through links::
ABAP and JAVA in Netweaver stack
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/4aa47d27-0a01-0010-5db4-bb62dfc8c069?prtmode=navigate

Knowladge in Java and ABAP

Hi All,
I am new to SAP XI. Can you please let me know if Java and ABAP knowladge are mandatory for working with XI.
Regards,
Bharath

Hi Bharath,
It is not like compulsary to know JAVA and ABAP to work for XI.
But ,if you want to be in this technology,to know ABAP and JAVA it will always be benificial.
If you are using UDF s in your project,or working with ABAP and JAVA proxies ,JAVA and ABAP mapping, if you know ABAP and JAVA then it will be benificial to you.Otherwise what ABAPER or JAVA programmeer is doing you didn't understand clearly.
It is always advantage to know these two languages,but not compulsary.
Reward points if helpful.........

SAP NetWeaver7.0-Java and ABAP trial version on linux. login problem

Hi all.
The following programs SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition installation.
Written by Mr. Gregor installation at https: / / SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition - Tips & Tricks
Note.
As I write programs that install the setup screen appeared normal. But username: root, password: sap123 is wrong. Ejected.
What is the problem?
Pls reply..
Best regard.

oh~ dear it's noncense $-(
found it.
username:root password:root
have a nice day.

I just ran a software update for Java and MacBook Pro SMC, now my Mini Display Port to HDMI TV is not working. The TV is flickering. The Mac Display is fine.

I was just watching / streaming TV off Safari on my actual TV.
I'm using a Mini-Display Port to HDMI cable for the connection to the external display.
Software update popped-up and said there was an update for Java and for SMC.
I ran the update and upon the computer restarting, my external display (my TV) is no longer working. It is now flickering.
It won't work in Mirroring or set up as an extended display.
I've reset SMC / PRAM / Safe Mode / Even restored from a Time Machine backup (From before the updates were done).
What could it be?!

I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port.

Netweaver Data base instances for Java and ABAP

Similar Messages

Maybe you are looking for