Network connection problems, please help!

I have had an iPod Touch (4th generation) for over a year now and it worked fine. Today, something went wrong with my network connection. One moment it says that I'm connected to a network, and a few seconds later it says I'm not connected... Then a few seconds later it's connected again. I have full wifi bars, and it does it throughout my whole house. The wifi symbol keeps going on and off. I tried turning my Verizon Westell Model 6100G Modem off and back on because this normally fixes my wifi connection problems. This didn't work. Then I tried turning my iPod off and back on. This didn't work. I tried turning the wifi off and back on. This didn't work. I tried forgetting my network and signing back in. This didn't work. I also tried resetting the network, and this didn't work either. I'm not having any connection problems with my laptop, it's working fine. It's only my iPod. I'm still able to use the wifi, but for a split second, it will not work. I'm not sure what else to do. It's very annoying! I'm going to see if it does this at other peoples houses with their wifi. Can any one tell me what's wrong and how I should fix it? My only theory is a broken antenna...Please help! Thanks!

I have two things you could try.
1. Plug your iPod into the host computer that which the network is based around because sometimes the network has trouble identifying a device if it has been a while since you plugged it into the computer.
2. Find some way to get your network information (IP address, Subnet Mask, Router, DNS numbers) from another device on the network (e.g. laptop). Then go to Settings > Wi-FI and find your router and tap the blue arrow to the right of the name and tap the tab that says "Static" and enter this information accordingly. Then exit back to the network names menu and re-enter your passcode for your network (assuming you have a passcode)

Similar Messages

Network Dropout Problems - Please Help

Hi everyone,
I bought my lovely Z10 from Bell and am using it paired with the Bell (supposed to be) 4G LTE network. However, despite the fact that I have a 4G LTE SIM, live in a prime 4G LTE reception area (smack in the middle of Metro Vancouver), and having spent several hours with Bell techs trying to get my phone to work with the 4G LTE network the best that I can get is H (not even H+ or 4G). Nothing that they have tried or that I have tried works. So far I have used two SIM cards, one LTE and one regular and both times the best I can get for service is H. Please do keep in mind that my Bold 9900 which I still have gets H+ with full bars on the exact same spot where I get only H with 4 bars with the Z10.
Further to this, using the 4G LTE SIM if I toggle the mobile network off and then on, the phone will quickly establish a connection with H, then after about 30 seconds it will drop back down to h with 2 bars, then switch to 4G LTE for about 5-10 seconds and then drop the network entirely (no connection at all, emergency calls only), and then finally after about 30 seconds to a minute it will recover and settle on H only.
What the heck is going on here? I am going to go to a Bell store today on the advice of Bell techs and get them to test my 4G LTE SIM in one of their phones to determine if it is my SIM or the device itself.
Can anyone share their experience? Any problems being reported? The best I could find on the net in this regard are the issues that a lot of iPhone 5 users were having but the causes and fixes are spotty. Many remedied the problem by replacing their hardware pointing to a hardware issue instead of network issue. Others continue to have issues to this day. There are no reports that I can find on Z10s and extremely limited information on Android devices (only a few people reporting SGS3s with similar problems).
Please help

I have a similar problem with a Z10 and M1 provider.
I notice an erratic behaviour of the data connection. Often the data connection drop, move from H+ to G to nothing back to H.. If I try to browse the web it is incredibly slow and half of the time I get the error message it can't load the page.
I connected the Z10 to the laptop using the hotspot function. A simple ping to the M1 DNS or www.google.com shows 50% packets loss. Half of the time a DNS lookup return a time-out.
I found this on the web http://www.berryqa.com/vodafone-facing-issues-with-the-blackberry-z10-data/
It seems the same problem I am having.

Low Network Connection? Please Help.

Hey guys.
I have been having some trouble lately with my network. This actually happens every few weeks, but usually I just switch up the Ethernet cables and it works fine. But I tried that this time countless number of times it did not fix my problem.
On my laptop, my internet is fine. But on my iPod Touch and Xbox, I have a very weak signal.
On my iPod Touch (2G, 16 GB, 4.0 iOS) I can run websites fine, but I Facebook and YouTube will not load. Maybe those apps require more strength to run them? I don't know.
On my Xbox, I have to attempt to sign in about 5 times before I actually am able to sign in. When I am finally able to sign in, though, I can only talk. Whenever I try to play Madden 11, for example, online, I disconnect from the servers immediately or just cannot connect to them. I know it's not the EA servers that are bad because my friends play online with ease and this happens with other games as well.
Also, my Linksys router (WRT54GS) is literally 8 feet away from me, in my room, with no barriers or anything to interfere with it and my iPod Touch's signal bars in the top right corner fluctuates between 1, 2, and 3 bars.
I have also upgraded my router to the latest firmware and have reset my router at least 10 times to no avail.
Also, I called my ISP and they said my modem was working at full strength without any problems, so I'm pretty sure this is an issue with my router.
I have also tried buying brand new Ethernet cables because I thought maybe my old ones were just worn out, but no, that didn't work either.
Also, on my computer, I'm on wireless and it says my connection is "Excellent."
I'll also add that my modem is a Motorola SB5101.
This is an extremely annoying issue. Are there any settings I should change in my router configuration? Can someone please help me out? Thanks!

Follow the below mentioned settings on the router and then check.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case.Click on the Wireless tab
Wireless Network mode should be mixed...
Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbors network...
Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Now see if you can locate your Wireless Network and attempt to connect.

Samsung Galaxy S3 Issues - No Network Connection! Please Help.

I have had my S3 for a few weeks now with no issues.
Suddenly in the last two days, my phone is silent for a while, which is uncommon. I generally have a consistent stream of notifications, emails, texts, etc. So when I picked up the phone, the 4GLTE signal is usually located, I saw a Ø icon. I thought that was weird but thought maybe I was in a bad coverage area. So I walked around outside the office building and got a notification when I clicked the Internet app, "No Network Connection."
Of course, I initially thought the SIM card was maybe messed up. I restarted the phone, and all was well. Then yesterday, the same thing! Now this morning my alarm goes off at 4:30am like always - only I get up to get ready for the gym and I see it's only 3:30. The auto-detect for time zone is wacky.
Upon googling no network connection with the galaxy, I see some S2 users had this same issue. Is this a phone issue? Network issue? SIM issue? It's done it twice in the last two days, so I don't know if I need to contact Verizon or what!
Thanks for any advice you can give.

It's really funny that anyone believes Verizon when they say an OTA is coming "soon" or "next month" or "next week". They only tell you these things to placate you and get you off the phone. They have no idea when an OTA is being rolled out!!!
Verizon is the absolute worst provider when it comes to timely phone updates. How long did it take for Verizon to update the Nexus compared to the GSM version? 6+ months!!
Be prepared to wait that long for an OTA to fix the dropped call issue, the data reception issue, the SIM card issue and the time zone issue.

Really annoying Internet Connection problem, please help!!!

At first my macbook ran perfectly, but about a month ago i started running into this problem. Everytime i boot my computer up at home it acts like im connected (bars...it even checks my email using gmail notifier which is running)...then after about 20 seconds or upon opening a browser it boots me off.
-if i use the pulldown menu to get my network it fails to connect, if i hit reconnect after that it fails to connect and i have to restart in order for it to work.
-the only way i can get it to work is from the pulldown go to "open internet connect" then from that pulldown select my network.
does anyone know what the problem is here? it is terribly annoying to to be able to just boot up and surf.
another, not terribly important question as i dont use windows much...if im using the mac side, then reboot onto windows my internet dies after about 2 minutes every time. If i just boot up windows without having been in mac first it doesn't do this. (and the only fix is to unplug and then plug back in the router).
thanks for any help,
Jeremy

I am seeing a similar problem at home.
We have two existing PowerBooks and an iMac G5 which all connect to my Airport Extreme basestation with no problems.
We just got a MacBook Pro which is having a lot of trouble staying on the airport wifi network. It keeps dropping off and when I attempt to reconnect, it gets an error doing that and offers to retry. The retry always fails.
This seems to happen if the MacBook is idle for a time and comes back up. I am running the airport environment as pure 802.11G only with WPA encryption. This feels like it is an issue with the wireless card in the MacBook Pro as our other machines in the exact same area do not have the problem.

Oracle connection problem - please help

Hi.
On my Win2k machine I first installed Oracle Developer 6.0 in C:\ORANT.
After that I also installed Oracle in C:\ORACLE.
I always used sqlplus C:\ORACLE\BIN\SQLPLUS.EXE till now. Now I have to
use Forms builder to complete my homework. The problem is that I can't
connect to my Oracle database with Forms builder.
I try to solve my problem by comparing runs of C:\ORACLE\BIN\SQLPLUS.EXE
with C:\ORANT\BIN\SQLPLUS.EXE (from developer tools). So I execute:
- sqlplus my_user/my_pass@testconn
in each directory. In the C:\ORACLE\BIN (using sqlplus that come with
Oracle database) all works fine, while in C:\ORANT\BIN (using sqlplus
that come with development tools) I get an error:
- ORA-12705: invalid or unknown NLS parameter value specified
I try to fix the problem by editing copying connection data from
C:\ORACLE\network\ADMIN\tnsnames.ora to
C:\ORANT\NET80\ADMIN\tnsnames.ora, but this didn't help.
Can someone help me?
My tnsnames.ora:
TESTCONN.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SID = MYSID)
[i]Long postings are being truncated to ~1 kB at this time.

Hi Damir,
Basically, it's possible the NLS_LANG parameter for your
database install is invalid or isn't a available default
value. This is a known problem.
I didn't any specific about one connection route working
and the other not, as in your case. However, I did find
some information on this problem when connecting through
Developer to a DB install.
The quick fix is to ensure your client initialisation
files have the 'NLS_LANGUAGE' parameter commented out.
If the client doesn't have an "NLS_LANGUAGE" parameter
entry the client and server use the language parameter
indicated by the server.
If that doesn't work (or you want to keep this parameter)
check the NLS_LANG parameter in the DB using your working
SQL*Plus connection. Try a default value like:
AMERICAN_AMERICA.US7ASCII
Also, you can try this:
SELECT * FROM sys.v$nls_valid_values;
Whatever you set for NLS_LANG should exist in the values
returned for this query, otherwise you'll get the error.
Unfortunately, resolving NLS_LANG issues is not always
this easy. If commenting out or changing the parameters
above still doesn't fix the problem, it is possible you need to reinstall the DB and choose the default language option. How you do this depends on the installer options
for DB version you are using.
One last point - I suggest you post your query to the
Forms & Reports forums here on OTN too. This forum is
ideally for Designer, rather than Developer questions.
Hope all this helps.
Regards,
Dominic
Designer Product Management
Oracle

Touch connectivity problems - please help!!!

Hi.
I've got an 1st gen 8Gb Touch that has been fine for ages until now !
Safari can't open a web page - I get the message "Safari can't open the page because it can't find the server". Also Mail, YouTube, Weather and Stocks don't update.
It is showing I'm connected to my WiFi network and all the other computers in my house can connect to the internet without any problem. I haven't changed anything on mt router or Touch from yesterday when everything was working fine
I've just tried restoring the Touch through iTunes but this hasn't solved the problem I'm afraid
Thanks for any help
Mark.

Have you tried resetting your network settings?
Settings > General > Reset > Reset Network Settings
Even though you just restored the iPod, try this step if you restored it from your backup vs. setting it up as a new iPod.
If that doesn't help, try powercycling your router. Just turn it off for about 10 seconds, turn it back on, check your Wi Fi settings to make sure you're connected, and then try Safari/other apps again.
CG

Firewall + Oracle connection problem, please help!

We've written a Java application (GUI) that resides on end user desktop. The tool uses a type 4 driver to connect to Oracle that is nested inside a firewall. The connection fails when trying to login to Oracle from the clients' computers that are not in our network; error says "Invalid protocol error!". Please advise...
Note- there are no connectivity issues with the tool when running inside the network.
Thanks,
KN

You need to open up the firewall for the selected port and probably the TCP/IP protocol on that port.
Thomas

Droid X2 no network connection. Please help.

Greetings and thanks in advanced for helping with this
situation. I’m currently using a Droid X2 and I cannot connect to the phone net
work. My wife’s Samsung Galaxy is having no issue at all. I’ve tried every one
of the steps from customer service: safe mode, reboot, factory reset, take the
battery out, and restarting the phone. I truly believe the X2’s are just faulty
by nature.
I had a Droid X and due to a software issue disabling the
GPS Verizon upgraded me to the X2. I really loved the X as it was a solid and
dependable phone. But the X2 I’m currently having issues with is my 5th
“like new certified” phone Verizon has sent me. Now the issue I’m having is I cannot
even make a basic call. I am beyond frustrated and while I know Verizon doesn’t
make the phone I would like a little more help than, “Sorry sir, we’ll ship you
a like new replacement.” I’m tired of spending my gas money to drive to the
post office to ship back defective phones. Oh, the other brilliant solution I
was given: “Sir if you are unhappy with our service you can just cancel your
service with us.” I’ve been a Verizon
customer for 8 years now and never before now have I been treated so poorly. One
bright point to this is one tech support rep “Greg” was very supportive and
went out of his way to help me.
Again I understand that Verizon doesn’t make the X2, I truly
get that, all I want is a phone that works, makes and receives phone calls. I don’t
want to cancel my service. Maybe I’m too loyal, but I refuse to believe that
after 8 years I mean so little to this company. There has got to be somebody in
this company that can help get me a phone that actually works, and please stop
sending out defective phones.

Just a quick update:
I just got off the phone with tech support, they too are pushing the whole "just update" mantra. Why would I want to upgrade and get pulled into a two year contract when I cannot get a phone that works now. So I offered to renew my contract and buy a new SIII if they would overnight it to me. It would cost them $20 to do so. Now Keep in mind I pay $225.00 per month, over a year that comes out to $2700.00. The tech stated that her supervisor stated that Verizon would not cover the $20 fee when I could "Drive to a verizon store and buy a new phone so I could have it by tomorrow."
So I'm terrible at math, but isn't $2700.00 > $20?
Maybe it's $20 > Customer?
This really disapoints me, all I want is a phone that works. Is the world going to end if I don't have it by tomorrow? Of course not. What I want is a little effort on Verizon's part to make this right. I needed the phone by tomorrow so I could stay intouch with my wife as She is drives out of town tomorrow. I thought $20 on their part was not a lot for me to ask. I was wrong.

Web Service connect problem, Please Help!!!

I developed a web service end point following the pattern of adventure as Purchase Order End Point Bean,
WSDL is correctly generated for both Server anc Client End:
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="DownloadWSService" targetNamespace="urn:DownloadWSService" xmlns:tns="urn:DownloadWSService" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types/>
<message name="DownloadWSInterface_downloadWorkAssignments">
<part name="String_1" type="xsd:string"/></message>
<message name="DownloadWSInterface_downloadWorkAssignmentsResponse">
<part name="result" type="xsd:boolean"/></message>
<portType name="DownloadWSInterface">
<operation name="downloadWorkAssignments" parameterOrder="String_1">
<input message="tns:DownloadWSInterface_downloadWorkAssignments"/>
<output message="tns:DownloadWSInterface_downloadWorkAssignmentsResponse"/></operation></portType>
<binding name="DownloadWSInterfaceBinding" type="tns:DownloadWSInterface">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="rpc"/>
<operation name="downloadWorkAssignments">
<soap:operation soapAction=""/>
<input>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:DownloadWSService"/></input>
<output>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:DownloadWSService"/></output></operation></binding>
<service name="DownloadWSService">
<port name="DownloadWSInterfacePort" binding="tns:DownloadWSInterfaceBinding">
<soap:address location="REPLACE_WITH_ACTUAL_URL"/></port></service></definitions>
and I deployed both server and client end of this web service on Sun One Application 7 (Developer version) successfully, in the application server log, I can see the info :
[#|2004-04-16T15:08:20.865+1000|INFO|j2ee-appserver1.4|javax.enterprise.system.t
ools.deployment|_ThreadID=12;|DPL5306:EJB Web Service Endpoint [DownloadWSInterf
acePort] listening at address [http://localhost:8080/webservice/DownloadWSBean]|#
But when I try to call it on the client side, I got the error and here is the log:
2004-04-16 15:48:28,477 WEB DEBUG [http8080-Processor4] - Port Info is http://localhost:8080/webservice/DownloadWSBean
calling download ws endpoint java.rmi.RemoteException: HTTP Status-Code 404: Not Found - /webservice/DownloadWSBean; nested exception is:
HTTP Status-Code 404: Not Found - /webservice/DownloadWSBean
Could anyone help and point to me a right direction, I have been hunting the problem for days and couldnt find a clue.
Thanks a lot in advance!

Hi, I finally solved this problem, the JDNI entry value is not configured properly for the session bean that's built for the service end point.
Changed JNDI value, and use that value in the service locator to look up the session bean home, it worked.

Database Connection problem please help

Hi,
I have a servlet that basically connects to the database if the userid and password is correct.
I have a "login.html" page where the user enters the "userid" and "password".The servlet does the checking and grants access to the user.
My question is as follows.As soon as I startup tomcat type in the url login.html,then press the submit button,(both the fields are blank) the servlet says "ok" this is this information is present in the database.It should say "not ok".Hope I question is clear.The code for the servlet is given below.
package package1.structure;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
import java.sql.*;
public class AuthenticateServlet2 extends HttpServlet {
private String user="";
private String pass="";
private String username="";
private String password="";
private String message1="";
public void init() {
try{
    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
    System.out.println("Driver loaded successfully");
   }//close try
catch (ClassNotFoundException e) {
System.out.println(e.toString());
}//close catch
}//close init() method
public void doGet(HttpServletRequest request,HttpServletResponse response)throws ServletException, IOException
} //close doGet
public void doPost(HttpServletRequest request,HttpServletResponse response)
throws ServletException, IOException
user = request.getParameter("username").trim();
pass = request.getParameter("password").trim();
System.out.println("*"+user+"*");
System.out.println("*"+pass+"*");
String message = null;
try{
Connection con= DriverManager.getConnection("jdbc:odbc:MyDS");
System.out.println("Successfully connected to database");
PreparedStatement pstmt;
pstmt = con.prepareStatement("SELECT username,password FROM users" + " WHERE username ='" + user + "'" +
" AND password='" + pass + "'");
ResultSet rs = pstmt.executeQuery();
if(rs.next())
      username = rs.getString(1);
       password = rs.getString(2);
if (username != null && password != null && user.equals(username) && pass.equals(password) ){
    message ="ok";
    PrintWriter out = response.getWriter();
    out.print("<B>" + message + "</B>");
    //response.sendRedirect ("http://localhost:8080/thankyou.html");
}//closes the if statement
else {
     message="not ok";
     PrintWriter out = response.getWriter();
     out.print("<B>" + message + "</B>");
    //response.sendRedirect ("http://localhost:8080/sampleapp/login.html");
}//close else statement
}//closes 2ndtry
catch (SQLException e) {
System.out.println(e.toString());
}//closes 2ndcatch
}//close doPost
}//close classKindly let me know ASAP.
Regarding the database.The fields in the database are "username" and "password" and it has one tuple
"xyz" and "xyz"
Hope that my question is rightly put.
Thanking you
AS

Actually, I think the servlet is doing the right thing
by printing "ok". A quick glance at your code tells
me that username and password are both members of your
servlet class and initialized to "". Neither is null,
and both are blank.
If your HTML page sends user and pass as blank
strings, you'll do a database query for those values.
If they don't appear in the database, your ResultSet
will have no rows and the username and password data
members will not be updated.
When you get to your if test, neither username nor
password is null and both are equal to the values
passed in from the HTML. Hence the "ok".
If you initialize your username and password members
to null this might still work.
Be sure to set them back to null when you finish the
test.
If you take all that JDBC code out of the servlet and
isolate it into its own class, you can test it out by
feeding it valid and invalid username and password
combinations. Once you've got that working perfectly,
you can just have the servlet instantiate your
database object and call its methods. If you have any
problems after that point, you know they're due to the
servlet and not the database interactions.
Right now the database and servlet are confounded.
Separate them out and you might make faster progress.
- MODHello,
Thanks for the reply.Will consider your points for a proper coding.Will keep posting.
AS

ITunes connection problem, please help

Dear Apple-forum members,
Yesterday I tried to sync my iPhone 4 with iTunes (Windows 7 64-bit). When it was at step 3, Windows gave me the message that iTunes did not respond, and shuts it down. While this happened, my iPhone was still in the sync mode but didn't do anything, so I cancelled it.
When I tried to sync again, I got error 0xe8000065. After a restart, iTunes doesn't even know that the iPhones was connected, although my phone WAS showed inside 'My Computer' (so my computer DOES recognise my iPhone).
I deleted the adapter, and reinstalled it again. Same issue.
I connected my iPhone with another computer, and reconnected it with my own computer. Now I get another error 0xe8000001.
I deleted and reinstalled iTunes, set iTunes as 'administrator', but also the same issue.
Anyone having the same problem.
How can I solve this?
I use:
Latest iTunes version 64-bits
Windows 7 64-bits
iPhone 4 iOS 4.3 (not jailbreaked)

You need to place the iPod in recovery mode and then connect it to your new computer and restore it via iTunes. Note that you will lose all content on the iPod. You can redownload apps at no additional cost provided you are signed into the same iTunes account that originally purchased the apps.

Ipod connection problem, please help!!

Hi
The problem is when i plug my ipod nano, into my computer the new hardware sound happens and it shows up in device manager and disk management but doesnt come up in itunes, my computer or ipod updater. I have tried the 5 r's (cant restore because it doesnt show up) and tried changing the drive letter. i have recently upgraded motherboard and it has stopped working since then so i am guessing it is something to do with that. (also it works on other computers)
Thanks Joss

HotSpot Shield sounds like that may be the issue--especially if your IP address is different.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Connection Problem please help

I'm looking for a cable that goes into the optical out (i think it's called that, where you put headphones and speakers and stuff) and goes into the red and white input things that you find on the back of TV's and stuff.
It's so i can can connect my macbook pro to my bass amp to play songs through it?
Any suggestions?

So you want to play sounds from your mac to your bass amp? Does a bass amp accept normal stereo style music signals (I don't know anything about bass amps).
The cable you are looking for is a minijack (sometimes called a miniphono), to stereo audio. You can pick these up at Best Buy or Circuit City, or order them online which is probably cheaper. They probably range somewhere between $5-$20.
Just be careful that your amp can handle the signals your Mac will output.
Cheers,
Josh

My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

Thank you both for your responses but my daughter was reassured by the salesman in the iStyle store (official Apple store in the UAE) that iMessages would work but conceded that FaceTime wouldn't. My iTunes account is registered in the uk and my daughter's iPhone has iMessages even though she bought it (and uses it) in Dubai. Can anyone else throw any light on this?

Network connection problems, please help!

Similar Messages

Maybe you are looking for