Network device did not have a driver installed pci\ven_10ec&dev_8168&subsys 1992103C&REV_0C

Hi: The only suggestion I can offer would be to try the driver directly from Realtek. Second driver on the list. http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false

Hello All, I have installed WDS/MDT2010 to deploying the Windows & operating system, it works with for most of my HP laptops models. When I deploy in ProBook 645 G1 it gives me foloowing error. A connection to the Deployment share could not be made.
The following network device did not have a driver installed pci\ven_10ec&dev_8168&subsys 1992103C&REV_0C
Retry : Try again to connect to the deployment share or give up. I have download all the network driver available for this model and imported them in out of box driver,update the deployment share and run again but still having the same issue. Appreciate if any one can help me on this. Thanks

Similar Messages

A connection to the deployment share could not be made - Networking device did not have a driver installed

I have a couple of HP 8200 desktops that I think might have bad nics. When I PXE boot them and start my LiteTouch, I get a Wizard error that says
A connection to the deployment share (\\mydpshare\share) could not be made. The following networking device did not have a driver installed
PCI\VEN_8086&DEV_1502&SUBSYS_1496103C&REV_04
I have that driver in MDT and it works on other HP 8200s. Looking into the Wpeinit.log, it looks like the driver loads but maybe the nic is bad:
Installing device root\kdnic X:\WINDOWS\INF\kdnic.inf succeeded
Installing device pci\ven_8086&dev_1502 X:\WINDOWS\INF\net1ic64.inf succeeded
Spent 16903ms installing network drivers
QueryAdapterStatus: no adapters found
Spent 0ms confirming network initialization; status 0x80004005
WaitForNetworkToInitialize failed; ignoring error
Has anyone seen this before?
Orange County District Attorney

Hi,
According to your description, it should be Intel NIC driver problem. I have checked HP official website, there is new NIC driver released, please access to the link below to download the NIC driver for test:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5037932&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D2%257CswItem%253Dvc_111651_1%257CswEnvOID%253D4060%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
Roger Lu
TechNet Community Support

Is there a recovery way if the device did not have icloud but another device shared an itune account

Our daughter's ipod touch was stolen at school. We did not have icloud app on that device but our other daughter has
a matching ipod touch....both shared an itunes account. Is there anything that we can do to locate the stolen ipod? or
disable the stolen ipod?
Any help would be greatly appreciated.
Thanks ~ Pam

I don't think there is anything you can do unfortunately. Sorry.

Received notice of an update, but that I did not have permission to install it. I am the owner/admin of my MacBook Pro. Nobody else accesses it. Tx

How do I tell Firefox that I am the admin for my computer?

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

When I try to download the newest version of FF I get a message that says I do not have permission to install it. Help!

I attempted to down load the 5 and 6 version at separate times. Both times I got an error message that stated I did not have permission to install the program. I own the computer and am the sole user. I am working on a Macbook Air. I have never encountered this issue before when updating Firefox. I am presently using the 3.5.6 edition and some of my sites are not supporting that edition anymore. Can you tell me what this error message means? I also have not been receiving the update messages for the new editions of Firefox.

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

HT201240 I have a new macbook pro that did not have a disk, OS X was pre installed so how can i change the administrators name and password, it did not migrate properly from my hard drive.., so how do i

I have a new macbook pro that did not have a disk, OS X lion 7.3.4 was pre installed so how can i change the administrators name and password, it did not migrate properly from my hard drive.., now there is some mysterious administrator name and or password??

See #5
Step by Step to fix your Mac

Facetime 1.0.4 not signing in. I did not have facetime installed. Downloaded from app store. Will not sign in. All network working fine.... Account working fine to app store and other....

Facetime 1.0.4 is not signing in. I did a new install as I did not have Facetime on my Mac OS X 10.6.8. Downloaded from app store. Message is: Could not sign in. Please check your network connection and try again.
Network checked all working fine. Thanks.

Hello ChuckLoyal,
It sounds like you are unable to connect to FaceTime on your Mac. I would use these troubleshooting steps from the article named:
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
Activating FaceTime for Mac
Use your Apple ID to register and use FaceTime. FaceTime registration validates your Apple ID and email address for use with FaceTime.
If you are unable to activate FaceTime, try the following:
Sign in to FaceTime for Mac using a valid Apple ID. After you validate the email address for use with FaceTime, other FaceTime users can connect to you using that email address. If you encounter issues registering or using an Apple ID account:
Ensure that you have an active Internet connection.
Verify that you are using a valid Apple ID at appleid.apple.com. You can also create an Apple ID or reset your password from this website.
Check that your email address is verified in FaceTime > Preferences.If FaceTime > Preferences shows your email status as "verifying," follow the instructions in the verification email that was sent to complete the process.
Toggle FaceTime off and on in FaceTime > Preferences.
If still unable to Sign In follow the instructions in FaceTime, Game Center, Messages on OS X: Troubleshooting Sign in
Thank you for using Apple Support Communities.
All the best,
Sterling

Surface Pro 3 / "Windows did not detect a properly installed network adapter"

Hi all,
I've been running the Windows 10 Technical Preview (9926) on my Surface Pro 3 successfully
since January. Unfortunately, I lost all internet connectivity today.
The problem started when I noticed the type cover wasn't working (pressing keys on the type
cover wasn't registering any typing on my screen) and my USB mouse wasn't working either. I tried removing and reattaching the type keyboard but this didn't fix the issue. I had to use the accessibility on-screen keyboard to sign into Windows (thankfully touch
was still working). Once I signed in, I still didn't have typing or cursor ability, so I decided to restart the computer.
Then it got worse. I noticed the Surface Pro 3 was stuck on "restarting" and wouldn't
actually restart. Since it wasn't responding, I held down the power button for about 10 seconds until it turned off. When I turned it back on, the type cover and mouse started working again.
Unfortunately, this is when the WIFI problems began. I had WIFI for a few seconds, and then
I lost internet. I disconnected/reconnected but there was a yellow triangle telling me there was some sort of problem. So I restarted the Surface Pro 3.
When it came back on, there were suddenly NO connections available at all. Opening the "Network
& Internet" settings page gave me the message "Windows did not detect a properly installed network adapter". And here I am, without internet on my Surface Pro 3, borrowing my friend's computer so I can type this message (he is also running
Windows 10 build 9926 on his laptop and is able to connect to my WIFI with no problems, whereas my Surface Pro 3 cannot even detect any networks). I have not dropped or damaged the SP3 in any way, and there have been no storms or power outages or anything
of that sort. Any ideas what could have happened to the WIFI on my Surface Pro 3?
Thanks for your help...
Ethan

Hi Ethan,
Currently, there are a few compatibility issue between the current hardware and Windows 10 Technical Preview (9926 build), this is mostly related to driver compatibility issue.
I suggest you download the latest network adapter driver package to install, when it is finished, check if it appears under Device Manager.
Surface Pro 3, Surface Pro 2, and Surface Pro firmware and driver packs
https://www.microsoft.com/surface/en-us/support/networking-and-connectivity/install-wireless-drivers
You can check if you can install the latest firmware package for your device.
Here is an article to talk about such things:
Windows 10 January Technical Preview on Surface
https://www.microsoft.com/surface/en-us/support/install-update-activate/windows-technical-preview#Known
Regards,
Alex Zhao
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I lost my iTunes library on my pc when the hard drive crashed. None of the data on the drive was recoverable and I did not have a backup. How can I get the music that resides on my ipod nano (4th generation back onto the new hard drive on my pc.

I lost my iTunes library on my pc when the hard drive crashed. None of the data on the drive was recoverable and I did not have a backup either locally or on the cloud. Much of the music is from old vinyl and podcasts which are no longer available.
How can I get the music that resides on my ipod nano (4th generation) back onto the new hard drive on my pc.
I have been reluctant to install iTunes on the new hard drive out of fear that I will lose all the contents on the ipod if I try to synch to the new hard drive.
Help!

No backup is a huge mistake.
You can redownload some itunes purchases in some countries:
Downloading past purchases from the App Store ... - Apple - Support

MTP USB Device did not install

New PC, Windows 7, Office 2010, My Blackberry desktop software does not see my 9530 Storm I've downloaded new desktop software, but keep getting an error that my MTP USB device did not install when I connect my 9530 to the USB Port.

BACK UP YOUR REGISTRY!!! Editing the registry can be (read: IS) dangerous and can cause no end of pain if done incorrectly.
- To Back Up your Registry: Click START menu and click RUN. Type REGEDIT. Click File, then choose Export and type a name for the Registry Backup, something like REGBACKUP012015 or whatever works for you.
- Click Export and let it export the registry to a file.
- To fix the issue: Follow the folder tree on the left to: HKeyLocalMachine > System > Current Control Set > Control > Class
- Find {EEC5AD98-8080-425F-922A-DABF3DE3F69A} down the LEFT hand side and click on it.
- Under the list on the RIGHT hand side find UpperFilters
- Right-Click UpperFilters and click Delete
- Close the registry editor and restart your PC (without the iphone attached).
- Once restarted and logged back in, plug in your iphone and voila! Windows will actually choose the correct driver.

TS1538 I do not have the Driver folder in this folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support like it says I should and myApple Iphone appears in Portable Devices. I tried uninstalling the driver and reinstalling it.

I do not have the Driver folder in this folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support like it says I should and my Apple Iphone appears in Portable Devices only, not in Universal devices. I tried uninstalling the driver and reinstalling it. My Iphone is still not recognized by Itunes when I plug it in. I can see my photos in the internal storage folder on my Windows 7 system though. So I know my PC sees the device. The Iphoneis an Iphone 4 with IOS 6 installed. It was working fine until I had to reinstall my Windows system. Now Itunes does not see it. I've uninstalled Itunes and reinstalled it (64bit) to no avail. Where is the Driver folder article TS1538 talks about?

Sorry I missed your post. Anyone else with the same issue should find useful resources at Troubleshooting issues with iTunes for Windows updates.
tt2

I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?

I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?
I have a 2012 mac book pro can I use that to connect with firewire and load osx that way? and how woudl I do that?
Thanks so much!

To what password are you referring? Do you mean your user account's admin password? Or do you mean the master password for File Vault or do you mean a Firmware Password?
For an admin password:
Forgot Your Account Password
For Snow Leopard and earlier
     Mac OS X 10.6- If you forget your administrator password
For Lion/Mountain Lion
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see Reset a Mac OS X 10.7 Lion Password and
     OS X Lion- Apple ID can be used to reset your user account password.
If you cannot do the above then try this:
1. Boot to Safe Mode by restarting and after the chime press and hold down the COMMAND-S keys until a black screen with white type appears.
2. At the prompt, type the following commands pressing return after each command line:
     /sbin/fsck -yf
     If you do not receive a "Filesystem OK" message then repeat this command until
     you do. If after seven tries you still do not receive a "Filesystem OK" message,
     then the system is corrupted and needs to be reinstalled.
     mount -uw /
     cd /private/var/db/netinfo
     mv local.nidb local.old
     rm ../.AppleSetupDone
     shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
How to reset the OS X password without a startup CD:
Reboot into Single-user Mode. Enter the following and press RETURN after each command line
   1. Type fsck -fy
   2. Type mount -uw /
   3. Type passwd <username>
I have never tried this method myself.

How do i recover music from old computer. its broken and i did not have the music backed up on any other hard drive.

how do i recover music from old computer. its broken and i did not have the music backed up on any other hard drive.

OK, well, seems like you need to lose the attitude if you really want help.
There are several ways to get music from iTunes on your computer to your device.
The easiest is to sync directly with iTunes by connecting your device to your computer, selecting the device, setting up your Profile pages, and then clicking the Sync button to sync.
First you want to open iTunes and under Preferences>Devices, make sure that you are not syncing automatically:
Make sure that box is checked.
Then follow the instructions in the article below for either your computer or your Mac to set up your Profile pages and to sync your music via iTunes:
WINDOWS IOS SYNC ITUNES 11
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
You can also directly download music from iTunes to your device by going to the iTunes icon, going to "Purchased", and selecting the items that are not on your device that show a little cloud next to them. Click on the cloud and the music will download.
You might also want to familiarize yourself with your iPhone 5 manual. It has all the answers you cannot find on Google or by trying to just do it by brute force. If you would take a little time to read about your device and how to use it, you might not be so frustruated and unnecessarily snarky to people who are trying to help:
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Best of luck,
GB

I have the new iOS 6.1.2 on my iPad. My wifi connects to my home network but keeps dropping it and won't reconnect. Did not have this problem with previous iOS.

I have the new iOS 6.1.2 on my iPad. My wifi connects to my home network but keeps dropping it and won't reconnect. Did not have this problem with previous iOS. Apple, you have a quality assurance issue. Don't be like Microsoft where they send out pieces of junk with testing it.

Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Both of my computers crashed nearly simultanesously due to mal-ware, had to erase hard drives to start over, did not have chance to de-activate either Acrobat or Creative Cloud before they crashed. I need you to retroactively deactivate these two previou

Both of my computers crashed nearly simultanesously due to mal-ware, had to erase hard drives to start over, did not have chance to de-activate either Acrobat or Creative Cloud before they crashed. I need you to retroactively deactivate these two previous computers (one Dell desktop, another a Dell laptop from my university, the University Of Missouri_KC), so that I can re-install on my laptop (which has been repaired by UMKC), and the other on my new private desktop (which replaces my previous desktop, which cannot be salvaged). I have the serial numbers of my two products, if Adobe could request them
Please respond as soon as possible. - Marc Garcelon, [email protected], UMKC email address: [email protected]@

Hi Marc,
Please refer to the help document below for deactivation:
Activation & Deactivation Help
Also, the creative cloud membership can only work on 2 machines. You will receive an error automatically on the third machine.
Regards,
Sheena

Network device did not have a driver installed pci\ven_10ec&dev_8168&subsys 1992103C&REV_0C

Similar Messages

Maybe you are looking for