Network Error []: Cannot Get Host Name when running business rules

Guru's
We are getting the following error intermittently when we are running business rules (Planning Application >>Tools>>Business Rules) or running SmartView refreshes:
Network error []: Cannot Get Host Name
The following is then logged in the Essbase Application logs:
Local/Application/Database/admin@Native Directory/Error(1042022)
Network error []: Cannot Get Host Name.
A quick look at the Essbase Error Messages Doc says it is a network error and we have to consult the network documentation. Unfortunately this is not very descriptive so we logged an SR with Oracle but we don't seem to be getting a resolution.
The environment is 11.1.2.0 and the architecture is as follows:
Server 1 - MS Server 2008 x64:
Planning, Calc Manager, Foundation Services, Framework Web Services, EAS, APS, Web Analysis, FR Web Services
Server 2 - MS Server 2008 x64:
Essbase Server
Server 3 - MS Server 2008 x64:
Framework Services, FR Print Services
We have tried doing the following:
1. Put in the server host names into the hosts file on the Hyperion Servers
2. Applied the following TCP/IP settings on all the Hyperion Servers and one of the user machines as a test:
      - Added a new DWORD Value named TcpTimedWaitDelay and set it to 30.
     - Added a new DWORD Value named MaxUserPort and set it to 65534.
     - Added a new DWORD Value named MaxFreeTcbs and set it to 6250
3. Confirmed that there are no packet drops by monitoring the server NICs so no packet loss could be the cause of this issue
4. The Essbase Config file has the following settings:
NETDELAY 2000
NETRETRYCOUNT 2500
Has anyone come across this issue and if you managed to resolve it, how did you go about it.
Thanx

Hi Rahul
The issue is happening to a number of calcs so it it not one calc specifically. I will ask the functional consultants to enhance the logging in the business rules so that we can see if the issue happens on a specific member\block etc and yes we do use Xrefs
We can run this as a calc in EAS without any issues and it's intermittent because this business rule runs 95% of the time in Planning Application >> Tools >>Business Rules without any issues.
Thanks

Similar Messages

Network error []: Cannot Get Host Name

Is there a config or other Essbase setting I can use to eliminate this error?
My calc script completes successfully after an hour, the numbers are always correct.
This error show up randomly. You don't see it for a week, then three days straight. Then gone for a month....

Hi Rahul
The issue is happening to a number of calcs so it it not one calc specifically. I will ask the functional consultants to enhance the logging in the business rules so that we can see if the issue happens on a specific member\block etc and yes we do use Xrefs
We can run this as a calc in EAS without any issues and it's intermittent because this business rule runs 95% of the time in Planning Application >> Tools >>Business Rules without any issues.
Thanks

Error connecting to Essbase Server when running business rules

We recently migrated from v9.3 to v11.1.1.3. I have two users with Administrative access who need to run business rules on a native Essbase application, but cannot. They get the message 'Error connecting to Essbase Server'. They get this message when trying to set this execution database. They can't even expand the server to see the list of applications. I have tried deprovisioning them in Shared Services, refreshing security, then adding it all back in and refreshing again, but it doesn't work. My own id has identical access to that which I'm granting them, and I have no problems. I even created a native user with the same access and it works as well. No matter what I do, I cannot get these two users to be able to run their business rules in EAS.
We also have a Planning application, and the Planning Administrative user has the same issue. However, this user is able to get around it by running rules using the Planning connection rather than the Essbase connection. She has the same issue of not seeing anything under the Essbase Servers when trying to set the execution database though.
In version 9, we were not using Shared Services for Essbase security. Unfortunately our consultant chose to set it up using Shared Services security when migrating, and according to the documentation, one cannot go back to using Native Essbase security.
I also tried running the Externalize Users wizard and the three users with issues failed to externalize. My own id did, and the native user I created succeeded.
Has anyone experienced an issue like this or have any ideas on how to resolve?
Thanks,
Sabrina

Follow up - Oracle has finally resolved this. It's so simple, yet no one thought to check until now. The three users with problems all have mixed case user id's in ldap. They have always logged into EAS with all lower case ids. In version 9, on native security, this was never a problem. But in version 11 using Shared Services (not sure which factor changed it), it doesn't work. The simple solution is to log in with their exact mixed case user ids. It only took Oracle three months and the creation of a bug issue to figure this out for us.
Sabrina

Error 1200323 after long hours of running business rules?

Hi all,
I am experiencing some problems with running business rules....
I got a sequence which includes about 20 business rules to run....
After several hours of running this sequence, it shows the errorcode: 1200323, which said that "Error parsing formula for [REGION DEFINITION] (line 1): expression expected after [(].
However, worst of all, this error does not always happen. Sometimes, I could run this sequence successfully without any error happening.
Any one experienced the same problem before?
Any suggestion are welcome and appreciated....
Thank you,
Casper

Gregg Stewart wrote:
...my iMac screen has this low audible hiss and pop, then afterwards it has a difficult time redering images even images from the web, and only after being powered down overnight does it appear to do better.
I also play a 3d video game from time to time while in the Windows 7 Bootcamp mode, and it appears the problem happens sooner when doing that.
You have a defective video card, take it in for service.
Run a hardware check by holding the d key down (for a long time) when rebooting, wrtie down what it says if anything.
If you didn't buy AppleCare, you have 1 year from the day of purchase to do so, it's highly recommended as the iMac's all in one design is prone to issues with heat, and it's not modular so one part goes down requires the entire machine to be brought in for service.
IMO, I never recommend a iMac expect to very light desktop consumer type users, heavy business users I recommend a MacPro this way they can switch parts and keep on going, unless they are a rich buisnes that can afford to have another iMac on standby.

Error message when running Business rules

Hello,
We are having the following error message when launching the business rules; cannot calculate - analytic server error (1013131): Failed to start Asynchonous thread. When looking att he Essabse log, we find the following errors around the same time we got this error:
[Wed May 06 22:01:45 2009]Local/ESSBASE0///Info(1051037)
Logging out user [brlpo], active for 63 minutes
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
Received client request: Get Substitution Variable (from user [essbaseadmin])
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Error(1051083)
Substitution variable AOP.Finance.CurrFcst does not exist
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Warning(1051003)
Error 1051083 processing request [Get Substitution Variable] - disconnecting
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
Received client request: Get Substitution Variable (from user [essbaseadmin])
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
Received client request: Get Substitution Variable (from user [essbaseadmin])
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Error(1051083)
Substitution variable AOP.Finance.Curryr does not exist
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Warning(1051003)
Error 1051083 processing request [Get Substitution Variable] - disconnecting
Would you have an idea of reason of error code?
Thierry

Hi,
Looks like the substitution variables its looking for are missing.
Can you check that?
Regards,
Amol

Opening Balances changes when running business rules

Good morning,
We are experiencing problems with the opening balance calculation (Flow: F100) when running the consolidation business rules in BPC 10.1.
For example, in 2013.12, Entity 1111 and Account C_ENL_DIV, the ending balance (Flow: F900) is 180.000 euros. When we run the copy opening balance package, the opening balance (F100) for 12.2014 is 180.000 euros, what which is correct.
The problem comes when some consolidation rules are executed, for example, AU_DIVCTA. For the previous case, we can see that the opening balance changes, previously it was 180.000 euros, coinciding with the final balance of 12.2013 and now the cell is empty, what which is incorrect. This occurs for more than one business rule.
The definition for the AU_DIVCTA business rule, is the next one. You can see that this do not affect to the opening balance in any case.
We attached an Excel where you can see this and much more similar cases the definition for the business rule AU_DIVCTA:

Hi,
Looks like the substitution variables its looking for are missing.
Can you check that?
Regards,
Amol

Imexpire cannot get session lock when run with scheduler

When imexpire runs at the scheduled time, it produces:
[15/Nov/2007:22:01:00 -0800] vmpm1 imexpire[7946]: General Error: Could not get expire session lock. Possibly another imexpire is running
I found an imexpire.lck file and deleted it, but got the same error the next day. Next, I restarted messaging, then ran imexpire interactively with no problems. The imexpire.lck file remained and was not removed afterward. Our imexpire policy was migrated from ims5.2 and is housed in configutil. Can you give me any suggestions for how to allow imexpire to run correctly via the scheduler?
We're running ims 6 2005Q4:
-bash-3.00$ ./imsimta version
Sun Java(tm) System Messaging Server 6.2-8.04 (built Feb 28 2007)
libimta.so 6.2-8.04 (built 19:28:07, Feb 28 2007)
SunOS vmpm1 5.10 Generic_125100-10 sun4u sparc SUNW,Sun-Fire-V490
David.

dpelinka wrote:
When imexpire runs at the scheduled time, it produces:
[15/Nov/2007:22:01:00 -0800] vmpm1 imexpire[7946]: General Error: Could not get expire session lock. Possibly another imexpire is runningAre you sure another imexpire isn't running?
Do you have coreadm enabled on your system and if so has any messaging server processes core dumped since you last restart messaging server?
I found an imexpire.lck file and deleted it, but got the same error the next day. The imexpire.lck file is supposed to be there. Processes obtain a file-level lock on this file. If you run fuser /opt/SUNWmsgsr/config/imexpire.lck does it return a value?
Next, I restarted messaging, then ran imexpire interactively with no problems. The imexpire.lck file remained and was not removed afterward. Our imexpire policy was migrated from ims5.2 and is housed in configutil. Can you give me any suggestions for how to allow imexpire to run correctly via the scheduler?You need to determine why the lock was left in the first place. Has it been working since you restarted messaging server i.e. do you see something like the following in your /opt/SUNWmsgsr/log/default log?:
[17/Nov/2007:23:00:01 +1100] mailserver imexpire[26309]: General Notice: Expire
started (0)
[17/Nov/2007:23:00:01 +1100] mailserver imexpire[26309]: General Notice: Expire
finished
Regards,
Shane.

I keep getting a script error cannot get rid even when ireistall or use chrome slowing my use down loads

An error has occured in the script on this page
Line:6
CHar: 590
Error Expected '}'
Code: 0
URL: https pbttbc.btmotive.com
I have installed Chrome and it does it and reinstalled firefox and still doing it

It sounds as if you may have a virus or malware on your computer. You may want to try and downlaod and run Malwarebytes Antimalware. [https://www.malwarebytes.org/antimalware/ Malwarebytes Anti-Malware Free]

Our company have just upgraded to iOS 6 and the majority of the users are now receiving the following error 'Cannot Get Mail – Server error. Contact your server administrator' when accessing ms exchange this never happened on iOS 5 can anyone help

Our company have just upgraded to iOS 6 and the majority of the users are now receiving the following error 'Cannot Get Mail – Server error. Contact your server administrator' when accessing ms exchange this never happened on iOS 5 can anyone help

Have you tried deleting the account and re-adding it on the phone?
What version of Exchange server are you running?

Stored procedure for getting host name, host instance and status of that host is it running or stopped.

Hello all,
yesterday I got one task in that I have to stored procedure for getting host name, host instance and status of that host is it running or stopped.
any body knows where exactly, In which table this details are there in BizTalk databases.
thanks

Status of the host instance is not stored in the SQL database for you to query the status using stored procedure. You have to either use Powershell or WMI to get the status.
In SQL, following table contains the details about the host like Name, LoginName, IsDisables etc but status of the host instance is not stored in the database.
SELECT * FROM BizTalkMgmtDb..adm_HostInstance
Powershell to get the status:
http://axonolympus.nl/?page_id=186&post_id=969&cat_id=6&lang=en
WMI to get the status:
https://msdn.microsoft.com/en-us/library/aa561820.aspx?f=255&MSPPError=-2147217396
https://msdn.microsoft.com/en-us/library/aa578621.aspx
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

KSLD how to specify kernel name when run ksld command on host

I am trying to use KSLD v1.0 and I could not reproduce similar result shown on KSLD User Guide. I followed almost everything on KSLD User Guide except I don't know how to specify kernel name when running ksld command. Here is what I have tried.
#ksld -t debug /ksld-space/slo8/proto/root_sparc/platform/sun4u/kernel/sparcv9/unix 99
I can only get unix and krtld read in. (ksld_dbx)modules could not show any modules *.o
When I use this
#ksld -t debug /ksld-space/slo8/proto/root_sparc/platform/sun4u/kernel/sparcv9/genunix 99
then I can only read on genunix.
Example on KSLD User Guide use unix.281, what is unix.281 created or obtained from target.
I noticed some SUN Tachnical Support Guru are online to answer questions, thank you for your quick reply.

I am having the same problem, did you get a solution?
Thanks,
I am trying to use KSLD v1.0 and I could not reproduce
similar result shown on KSLD User Guide. I followed
almost everything on KSLD User Guide except I don't
know how to specify kernel name when running ksld
command. Here is what I have tried.
#ksld -t debug
/ksld-space/slo8/proto/root_sparc/platform/sun4u/kernel
sparcv9/unix 99
I can only get unix and krtld read in.
(ksld_dbx)modules could not show any modules *.o
When I use this
#ksld -t debug
/ksld-space/slo8/proto/root_sparc/platform/sun4u/kernel
sparcv9/genunix 99
then I can only read on genunix.
Example on KSLD User Guide use unix.281, what is
unix.281 created or obtained from target.
I noticed some SUN Tachnical Support Guru are online
to answer questions, thank you for your quick reply.

After downloading the latest version of iTunes, I cannot get track names to appear when burning a cd from my playlists. Any ideas, please??????

What gives? I cannot get track names to appear on recently burned cd's. Just downloaded latest version of iTunes. I'm at a total loss. Have Googled- tried several things to no avail.

Go to the iTunes folder (it is in Music folder) and do this:
1. Back up your music
2. Delete "iTunes Library.itl". Then, open iTunes again and it should work

Msg.exe Error 5 Getting Session Names

Ok after 2 days of research and messing with policys i still have yet to resolve this issue. Due to vista not having netsend anymore I tried using the msg.exe command. So far I have got it to work just on my local computer. But sending it to other vista computers It gives me an error:
Error 5 getting session names
I am computer Atlantis
Destination: computer designated as "Challenger"
Both running Vista Business SP1
msg /server:atlantis admin "Test Message"
(local to local pc works)
msg /server:challenger admin "Test Message"
---> Response: "Error 5 Getting Session Names"
We are in the same work group, we are not part of a domain
Any help would be appreciated. From reading it seems to be a policy edit that needs to be changed, but I do not know what to change, so any detailed instructions would be greatly appreciated...
Alternative i tried: Also i downloaded netsend by czero.com and I can only send the message to XP computers. I cannot send a message to even myself.

Hello,
Based on some discussions about this topic, some community members provide the following tool as the replacement of net send that is not included in Windows Vista:
http://www.cezeo.com/products/netsend/
It’s said to support Windows Vista. Please give it a try.
Important Note: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.
Regards,
Lionel

HT2480 Ipad mini - exchange email stopped working randomly Error: "Cannot get mail. The connection to the server failed."

I got an iPad mini over Christmas and have had no issues setting up/managing my email until yesterday. I've had my Exchange email working for almost a month, and yesterday I stopped getting emails and getting the error: "Cannot Get Mail. The connection to the server failed."
I tried resetting the device (multiple times) and deleting and recreating the Exchange account (multiple times). This is getting annoying because it worked fine up until yesterday. I'm not aware of any updates to the device, or any changes that have occurred since yesterday.

Due to a screen issue, I had my iPhone 5 replaced two days ago. I repeated deleted the mail account and kept adding it but this did not make any difference. When I attempted to setup the new phone with my Google (Gmail via exchange active sync) accounts I was receiving this same "Cannot Get Mail" error. From what I was able to gather, this problem should be affecting Gmail accounts set up via Exchange. When originally purchasing the phone I was assisted and directed to set up my Gmail account through Exchange because it had the ability to use "ActiveSync" and push not only mail and calendars, but all of my contacts as well. I found this article regarding the subject.
http://www.pcmag.com/article2/0,2817,2413283,00.asp
What it came down to was having to delete my Gmail via Exchange account and separate it into two different accounts, a regular gmail account for my mail and a CardDAV account for my contacts.
Here is what I did. Google is changing their system and for new registrars Exchange ActiveSync will not work so you will be unable to register your account via Exchange and have your mail, calenders, and contacts all pushed together. I find this change really annoying. If you are having problems accessing your contacts after deleting the mail account, like I was, here is the work around.
To circumvent this issue go to Setting > Mail, Contacts, Calendars > Add Account > Other > Add CardDAV Account: Under server ender google.com, then your email user name and password, then click next to verify the information.
I hope this helps.

Error: Cannot get Azure subscription ID and thumbprint. Failed in New-FirewallRuleForWebsite in New-AzureSql.ps1

I am working through the eBook "Building Cloud Apps with Microsoft Azure" and when I run New-AzureWebsiteEnv.ps1 I get the following error
Error: Cannot get Azure subscription ID and thumbprint. Failed in New-FirewallRuleForWebsite in New-AzureSql.ps1
I have already tried adding -ExtendedDetails to Get-AzureSubscription in New-AzureSql.ps1 and New-AzureWebsiteEnv.ps1.
I am using Azure PowerShell 0.8.16 and Windows 7 Service Pack 1.

Hi,
Not too sure if you have tried this:
In the code you will have a line:
$s = Get-AzureSubscription –Current
Change that line to:
$s = Get-AzureSubscription -Current –ExtendedDetails
The difference between the two lines is that the –ExtendedDetails will return the Thumbprint required by the code
Reference:=
http://blogs.msdn.com/b/devschool/archive/2015/04/10/error-in-fixit-demo-cannot-get-azure-subscription-id-and-thumbprint-urghh.aspx
Regards,
Mekh.

Network Error []: Cannot Get Host Name when running business rules

Similar Messages

Maybe you are looking for