Network HP Laserjet is no longer accessible by my iMac and Macbooks after OSX upgrade.

My HP Laserjet 4100n is no longer accessible over my wired/wireless network from my iMac and Macbooks. This is new since I upgraded to OSX 10.6.8. The printer works fine from my old windows laptop. Thanks in advance for any help.

appears that apple has changed SMB code, and now its not possible login from windows on mac.
i installed snow leopard and now works fine.
apple is capable to make it run paying new license of smb code, but isnted of this, apple has created new protocol smbx and now, all others need to adapt your code to apple..
bad movement.. i am thinking sell imac and no back to apple anymore..

Similar Messages

BT Yahoo mail no longer syncs between two iMac and MacBook

I've used BT Yahoo Mail on an iMac, Macbook and iPad successfully for some time with IMAP settings. Following recent upgrades, the inbox is no longer kept in sync on the different computers. Messages read on one computer are not marked as read on the other, and newly arrived incoming mail is not displayed on the second computer, having appeared on the first. The only solution seems to be to rebuild the mailbox - tedious as it takes time, and you don't know until you try whether there is mail to be synced.
I'm using Mail 6.5 (1508) on the iMac, and Mail 5.3 (1283) on the MacBook.
Is there any solution to this please?
Thanks.
Stephen

Hi unwina,
Are you still having trouble with this? Fill out the contact us form in the about me section of my profile and we will have a look.
Cheers,
Chris
BT Moderation Team
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

IMac and Macbook Pro no longer connecting to the Wifi?

Hi there,
I've been in London this weekend, only to return home to find issues connecting to my wifi. Weirdly, it's only the iMac and Macbook Pro having trouble, everything else is connecting fine e.g iPad, Phone, Android Tablet etc.
I'm getting disconnected around every 20 seconds and cannot figure it out! It's so frustrating as I'm wondering if there's been an update released for OS X that it has downloaded recently? Especially seeing that when I run windows from bootcamp on my iMac, it doesn't disconnect. And I also don't believe it's an issue with the hub.
Has anyone got any suggestions? I've tried removing the network and re-adding, help for about an hour but still not much use.
Thanks, Matt

Wi-FI connection drops
Wi-Fi Problems in OS X Yosemite
Wi-Fi Problems in OS X Yosemite (2)
Wi-Fi Problems in OS X Yosemite (3)
Wireless Diagnostics
Also try turning off Bluetooth.

Imac and Macbook pro can no longer see one another

I'm not sure why, but all since I upgraded to Yosemite, I can no longer see my iMac on my Macbook Pro and vice versa. I could always see the computer that I needed to connect to in finder, or I could connect with my iCloud password. As of today, I can no longer access my iMac from my Macbook Pro and that's a problem. If someone could provide directions (dumbed down version) explaining how to connect the computers from scratch, I would greatly appreciate it. I am fine with setting it up again but I can't recall how I did it. Thanks so much. I did upgrade both my iMac and MacBook pro to Yosemite over the weekend.
Model Name: iMac
Model Identifier: iMac11,3
Processor Name: Intel Core i3
Processor Speed: 3.2 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 4 G
SMC Version (system): 1.59f2
Model Name: iMac
Model Identifier: iMac11,3
Processor Name: Intel Core i3
Processor Speed: 3.2 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 4 GB
SMC Version (system): 1.59f2

Ensure Sharing preferences are set correctly for both devices.

I used to manage 3 websites using both my imac and macbook, using dropbox, however I can no longer access them from my mac book.

I have been managing 3 websites using iWeb for the last several years, using both my iMac and Macbook. However for the last two weeks, I can no longer access these sites from my macbook. It appears "empty". When I first started seeing this, I took it to the Genius Bar in another city and he moved some library contents to my desktop - still didin't help.
I know iWeb is a thing of the past, but I can't stop right now and learn something new for about the next 4 weeks (in a sports team in the middle of a season)
. After that, I will have time to learn a new product.
Also, what is a suggestion for replacing iWeb? Sandvox? Rapid Weaver?
Thanks!

What do you mean when you say you "can no longer access these sites?" Does that mean you can't connect to those sites in your web browser, or that they aren't showing up in iWeb?
If the latter, note that your iWeb data is all entirely stored in a hidden file. In the Finder, choose Go -> Go To Folder and paste the following path into the window that opens:
~/Library/Application Support/iWeb
In that folder, you will find a single file, called Domain. That's got all the data for all your iWeb sites. If that file is missing, or if it has become corrupt, you will need to restore it from an earlier backup.
As for replacing iWeb, either Sandvox or RapidWeaver should work. Which works best will depend on your own tastes. Note that neither is capable of fully importing iWeb sites, as those sites will have a lot of content that is copyrighted by Apple. For more information about transitioning to one of these products, see:
http://rapidweaverfaq.org/site/migrating_from_iWeb.html
http://www.karelia.com/sandvox/help/z/Transitioning_from_iWeb.html

My external HD of 1TB is not being recognized by the iMac and when after a long waiting period it does, the whole computer becomes extremely slow. Do I need any particular add-on to make it workable?

My external HD of 1TB is not being recognized by the iMac and when after a long waiting period it does, the whole computer becomes extremely slow. Do I need any particular add-on to make it workable?
Before I updated to OS X Mavericks I was using another external disk that was getting disconnected ocasionally so I bought a new ADATA HD710 portable 1TB Drive and moved the files to it. This new drive which is supposed to be OS X Mavericks compatible takes minutes to show the files especially when opening second and third level folders which has made mu iMac unusable
What should I do?

Your Mac should be able to recognize many different types of drives (including Windows-formatted drives) immediately for Reading, provided they are in good working condition and not damaged. There should be no need to transfer to a different type of drive.
If there is no recognition of this drive, see if it can be seen in Disk Utility.
If your aim is to transfer the data on it DO NOT use ERASE or PARTITION as these will completely erase all the information on the Drive.
If the drive is present while the Mac sleeps, it is likely to drop out and not be seen any longer, especially if it is a USB-powered drive.

APPLE DOCKING STATION NO LONGER WORKS WITH TOUCH 3G and 4G after ios 4.2.1

APPLE DOCKING STATION NO LONGER WORKS WITH TOUCH 3G and 4G after ios 4.2.1 update.
I have both of these touches. I updated both 3g and 4g to ios 4.2.1 and poof...no docking station support other than charging, no audio and no remote function. My av/cable works with the tv, and the headphone jack still outputs audio, just no auido through the Apple dock and hte remote is dead. I purchased the dock from the apple store last year and it was working with both ipod 3g and 4g grrrrr...
Is Apple now in the bug trade business?, trade one for another....
Anyone else have this problem?

My iPod Touch 3G running 4.2.1 works fine with the Apple docking station.
Perhaps you have a loose cable somewhere and/or a dead battery in your controller?

I have iphoto 7. I need to order additional copies of a wedding album. When I try, it tells me that I can no longer order on iphoto 7 and I need to upgrade. When I try to upgrade, it tells me tat I can't upgrade because I have OSX 10.6.8 What can I do

I have iphoto7. I need to order additional copies of a wedding album I creared LESS THAT A YEAR AGO!!!. Apperently I can no longer order on iphoto 7 and cannot download the upgrade on my OSX 10.6.8 system What can I do?

Your profile signature is confusing. There it says "iPhoto '08, OS X Mountain Lion (10.8)". But your question mentions older systems: " iphoto 7 and cannot download the upgrade on my OSX 10.6.8 system"
Do you have two different Macs? If you have a second mac with OS X Mountain Lion (10.8), you could upgrade that to MAvericks and buy the most recent iPhoto '11, version 9.5.1 from the App Store. That would be the least expensive solution to upgrade your iPhoto.
If you only have iPhoto 7 on OSX 10.6.8, you can can buy the boxed iLife '11 installer package from Amazon. This will install an early version of iPhoto '11, that runs well with your current system and will let you print your book. You will need to run the iPhoto library upgrader to convert your old library, see: iPhoto '11: About the Library Upgrader
Also, you should be aware, that upgrading your library may change the book layout a bit, because the themes have changed between the versions, so you need to keep a backup copy of the library and iPhoto 7, to be able to compare the upgraded version to the original.
-- Léonie

WinXP, iMac and MacBook network

Hello.
I am making home network between iMac, macbook (OS X 10.5) and WinXP(pro) PC.
PC is wired to router.
iMac and MacBook are connected to the same router via Air-Port.
So the problem is: iMac can browse files on PC, macs can browse files in each others folders, PC can browse files on iMac.
But I can't make macbook and PC to connect to each other. But they cam ping-pong by their IPs.
I googled a lot and read that forum but couldn't find any suggestions.
Thanks for help.
Andrej.

There is some additional info.
iMac and MacBook can use printer connected to the PC.
Also i can connect to MacBook through SSH: macbookuser@macbookip. That is rather strange.

My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this?

My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this? If not is there any way to actually get a genuis appointment lol to get one of them to have a look at the hardware on the keyboard?

Apple Support (formerly ExpressLane):
https://getsupport.apple.com/GetproductgroupList.do
https://getsupport.apple.com/GetSASO?SG=SG001&locale=en_US

I have 2 IMacs and MacBook Pro- can not work on FCP simultaneously when my network ports are on (open). How do I go about changing this?

Hi!
I have 2 IMacs and MacBook Pro and can not work simultaneously on FCP on all workstations when the network port is open. Can anyone help me on this?

Did you purchase Final Cut Pro from the Mac app store? Or install it from disk? If from disk, you may have installed it on all machines using the same serial number, and using all of them simultaneously violates the license agreement. If you purchase from the App store the licensing is different and that may not apply.

Network imac and Macbook pro Via ethernet

Hello
I am traveling with my imac and macbook pro. What is the step by step procedure using and ethernet cable to access both computers by setting up a network?
Thank You
Dick

Everything you needed to know is right here:
http://support.apple.com/kb/HT1549

Iphone and ipad can find network, iMac and macbook 10.8.2 cannot

Had a network fault. When fault was fixed, ipad/iphone & Dell studio xps laptop reconnected automatically. Imac 2012 and macbook 2010, 10.8.3, can see network but not connect automatically. Tried connecting to network and get message connection timeout has occurred.
Got connection by;
Open Network preferences
Join other network
enter network name select - Security wpa2 personal
enter network password
However - I need to do this after every sleep/reboot - is there a fix for this?
PS - I noted that I had previously been on WEP security setting and had real problems connecting to external devices consistently, such as epson wireless printer BX935FWD, and Western Digital My Book Live Duo. Since moving onto WPA2, these connection now work consistently, but macbook and imac always need to be forced to connect to network, in manner described above
Does anyone share a similar problem/managed to resolve network issues? - very frustrating.....must be an OSX issue as all other devices connect without issue.

I've managed to download 10.8.2 for my MBP Retina 13.3" but when I try and install I'm told that none of my discs are suitable i.e. Internal solid state drive with 370 GB available, or attached thunderbolt drive. Meanwhile my iPhoto won't work. This has arisen because I migrated from an older MBP which was already running 10.8.2 and had latest iPhoto onto a factory fresh 10.8.1 machine.

My iMac and MacBook can't see each other on the same wifi network

I've got a 2010 MacBook running Snow Leopard and a late 2009 iMac running Lion. They are connected wirelessly to a Belkin N+ router and can ping one another by IP. They can also share a mouse using Synergy by IP. They can't resolve one another's hostnames (<compname>.local).
Unfortunately, they don't show up in each other's local network in Finder. They have recognized each other twice in the few days I've had this set up but those times were directly after a reboot of both machines and even then, only one machine could see the other. One time it was iMac -> MacBook, the other it was MacBook -> iMac.

More information: After restarting my router and upgrading the firmware, the my MacBook was able to see my iMac (ping it directly immediately) and it showed up in the list of Shared devices.
My iMac was able to ping the MacBook eventually (after 22 timeouts, it eventually got a few high round-trip pings that lowered shortly thereafter), but it is still unable to see the MacBook in the Shared devices list.
I was, however, able to mount it with Finder > Connect to Server > afp://192.168.2.3. This is useful progress, but it's not ideal because I use some software like "teleport" that still doesn't recognize my MacBook is a shared Mac. The teleport software on my MacBook does recognize the iMac as a shared Mac.
Here's the output for my attempted ping from the iMac to the MacBook:
ping 192.168.2.3
PING 192.168.2.3 (192.168.2.3): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 22
64 bytes from 192.168.2.3: icmp_seq=11 ttl=64 time=12338.226 ms
64 bytes from 192.168.2.3: icmp_seq=12 ttl=64 time=11341.133 ms
64 bytes from 192.168.2.3: icmp_seq=13 ttl=64 time=10341.974 ms
64 bytes from 192.168.2.3: icmp_seq=14 ttl=64 time=11452.557 ms
64 bytes from 192.168.2.3: icmp_seq=15 ttl=64 time=10718.590 ms
64 bytes from 192.168.2.3: icmp_seq=16 ttl=64 time=9799.987 ms
64 bytes from 192.168.2.3: icmp_seq=17 ttl=64 time=8798.967 ms
64 bytes from 192.168.2.3: icmp_seq=18 ttl=64 time=7803.687 ms
64 bytes from 192.168.2.3: icmp_seq=19 ttl=64 time=6802.503 ms
64 bytes from 192.168.2.3: icmp_seq=20 ttl=64 time=5818.710 ms
64 bytes from 192.168.2.3: icmp_seq=21 ttl=64 time=4818.158 ms
64 bytes from 192.168.2.3: icmp_seq=22 ttl=64 time=3816.990 ms
64 bytes from 192.168.2.3: icmp_seq=23 ttl=64 time=2815.664 ms
64 bytes from 192.168.2.3: icmp_seq=24 ttl=64 time=1828.492 ms
64 bytes from 192.168.2.3: icmp_seq=25 ttl=64 time=828.307 ms
64 bytes from 192.168.2.3: icmp_seq=26 ttl=64 time=9.865 ms

IMac and Macbook Pro Networking Issue

Just recently both of my Macs have developed a wierd networking issue. I am sharing folders on my Windows server (WHS), now this odd slow issue appeared when using a file from the server. It acts like my network is really slow when opening a file, but my windows machines work fine on it.
I have not made any changes to the server, I am running a Gigabit Cisco network (not linksys) in my home and this thing has got me stumped. I installed an anti-virus on the iMac and it found nothing. Either wired or Wireless I see the same results but only related to the Mac's..... does anyone have an idea what might be doing this? I am kinda a Mac noob in most aspects so I am looking for any help here.

It very well could be the antivirus app, most are intrusive and debilitate rather than enhance performance and should be removed using the developers instructions. You haven't really told us anything useful such as any settting you may have changed. However if you began working backwards resetting any changes and uninstalling the apps added since the performance issue started then you probably will find your issue.

Network HP Laserjet is no longer accessible by my iMac and Macbooks after OSX upgrade.

Similar Messages

Maybe you are looking for