Networked OJ 8500 that is extremely slow in job queuing.

We recently installed an OJ 8500 and the job queuing is extremely slow.  The printer is networked (wired) and all users have the same problem.  We run a combination of XP, Vista and Windows7.  We have no problem getting the printer to print.  Its just painfully slow.  Job to job delays are 30 sec to 1 min.  The first job is slow to start.  Multiple copies of the same page print with this long delay between pages.  The OJ 5400 we had previously did not have this problem.  Can this be fixed?

Once the job hits the printer it prints immediately.  It's right after you tap Print on the iPad that takes a long time. There is a box that pops up saying that the job is being processed (don't remember the wording exactly).  Once the box disappears it also takes a bit of time for the job to hit the printer. 
The actual process of the printer printing is normal. 
Also, in some cases the iPad won't even see that there is a printer connected to the network even though the printer is powered on, online and the iPad is connected to the home network.  Usually a reboot of the printer fixes this problem.
Thanks

Similar Messages

  • Mac mini works extremely slow

    Hi
    I have Mac mini that works extremely slow,
    it starts to load the OS but turns really slow once the login is done, it takes about 30-40 min to load.
    i did few tests like permissions verify and fix, then verify and repair disk which said that Macintosh HD is OK.
    What should I do next? Its sounds like hardware issue - for my opinion its the HDD but I can't understand why when I use the Restore mode the computer works fast so maybe its OS issue related? Should I reinstall OSX?
    what do you recommend for me as a Mac newbie user
    thanks a lot

    The boot drive is failing, or you have some other hardware fault.
    Back up all data immediately, then make a "Genius" appointment at an Apple Store to have the machine tested.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
    *An SSD doesn't need to be zeroed.

  • Extreme Slowness

    I have been playing with Studio Creator for about a week and so far have been pretty impressed while going through the tutorials. Today I decided to try something real. So I created a table and bound it to a MySQL database running on the local machine. It is only printing out 4 elements in each row with 137 rows being output. Everything compiled fine, but when it switched to the web browser to view the results it slowed to a crawl. It took a few minutes for the web page to load those 137 records. I had someone connect from a different machine and they experienced the same slowness.
    The system I am developing on is as follows.
    Dell Dimension.
    3.4GHz Intel Pentium 4
    1 GB Ram
    80 GB Serial ATA HDD
    Fedora Core 4, all current updates.
    MySQL 4.1.6
    Latest Java from Sun.
    I don't think that this extreme slowness is normal but if running such a simple app on my workstation causes such a load problem I don't think that our company can afford enough server power to run a real application. Any suggestions on how to speed things up? I have already gone through and shut off as many extra services as I could that were running in the background. It didn't help..... the app from JSC is still very very slow. I tried closing the IDE and hitting reload on the web page. It still took a very long time (although not nearly as bad as when the IDE was open). So perhaps this is just a Java issue?
    Even if we could afford the server power... it seems crazy that my workstation won't work as a development platform.
    Anyway... any advice to speed things up would be appreciated. Closing the IDE every time I want to test an app and having it still be slow is not workable.

    Check this thread.
    http://swforum.sun.com/jive/thread.jspa?forumID=123&threadID=62362
    I hope you are not having similar problems.
    Please also get a thread dump and send it to the address below.
    Here's the instructions for obtaining a thread dump
    Make sure the IDE has been started using runide.exe
    and it's running like a turtle ...
    On Windows, please do the following:
    1) Exit JSC
    2) start composing an email and
    from JSC, choose Help -> Java Studio Creator Log
    File and in the Output window, type Ctrl-a then Ctrl-c
    and paste to the email compose window (Ctrl-v)
    3) Using Windows Explorer or DOS window (cmd.exe)
    cd to JSC_INSTALLDIR\bin
    execute runide.exe
    4) Edit the properties of the DOS window
    - right-click in title bar, select the Layout tab
    - change the Window Size height value to 1025
    5) As soon as JSC freezes or performance degrades,
    in the DOS command, type the key combination
    Ctrl-Break (the Break key may be located at the
    top right and shared with the Pause key)
    6) There should be some output sent to the DOS window.
    - In the DOS window, right-click in the title bar and
    choose Edit-Select All then type Enter
    7) In your editor or email program, paste (Ctrl-v) the
    output
    8) please email both ide.log and the output to
    creatorfeedback AT sun DOT com

  • TS3274 Extremely Slow Starting Up

    I have an iPad 2nd Generation that is extremely slow starting up.  I have made sure that all apps are closed and all software is up to date.  Any ideas?

    Before you do anything else backup your computer.
    Next run Apple Hardware Test 3x back to back in extended mode. If any errors appear this confirms a hardware issue and a repair is necessar. Please post back after running AHD in extended mode 3x back to back.

  • I just updated my RAM and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.

    I just updated my RAM (replaced the two 2 gig cards with two Corsair 8 gig cards) and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times with Photoshop and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.
    Here is the crash report:
    Interval Since Last Panic Report:  5426204 sec
    Panics Since Last Report:          2
    Anonymous UUID:                    2DD57DDB-BB42-5614-395A-CA6225BDAFD9
    Wed Mar 20 11:36:53 2013
    panic(cpu 0 caller 0xffffff801aa43d8e): "a freed zone element has been modified in zone: maps"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:219
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81eb0eb950 : 0xffffff801aa1d626
    0xffffff81eb0eb9c0 : 0xffffff801aa43d8e
    0xffffff81eb0eba00 : 0xffffff801aa435d2
    0xffffff81eb0ebae0 : 0xffffff801aa663f7
    0xffffff81eb0ebb20 : 0xffffff801aa67398
    0xffffff81eb0ebc70 : 0xffffff801aa6887c
    0xffffff81eb0ebd20 : 0xffffff801ad5b8fe
    0xffffff81eb0ebf50 : 0xffffff801ade182a
    0xffffff81eb0ebfb0 : 0xffffff801aaced33
    BSD process name corresponding to current thread: launchd
    Mac OS version:
    Not yet set
    Kernel version:
    Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
    Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
    Kernel slide:     0x000000001a800000
    Kernel text base: 0xffffff801aa00000
    System model name: iMac11,2 (Mac-F2238AC8)
    System uptime in nanoseconds: 1070542822
    last loaded kext at 707348380: com.apple.driver.AppleIRController    320.15 (addr 0xffffff7f9c53e000, size 28672)
    loaded kexts:
    at.obdev.nke.LittleSnitch    3908
    com.apple.driver.AppleIRController    320.15
    com.apple.driver.AppleUSBCardReader    3.1.0
    com.apple.driver.AppleFileSystemDriver    3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    34
    com.apple.iokit.SCSITaskUserClient    3.5.1
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.2.2
    com.apple.driver.AppleUSBHub    5.2.5
    com.apple.driver.AppleFWOHCI    4.9.6
    com.apple.driver.AirPort.Atheros40    600.70.23
    com.apple.driver.AppleUSBEHCI    5.4.0
    com.apple.driver.AppleAHCIPort    2.4.1
    com.apple.iokit.AppleBCM5701Ethernet    3.2.5b3
    com.apple.driver.AppleUSBUHCI    5.2.5
    com.apple.driver.AppleEFINVRAM    1.6.1
    com.apple.driver.AppleACPIButtons    1.6
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleHPET    1.7
    com.apple.driver.AppleSMBIOS    1.9
    com.apple.driver.AppleACPIEC    1.6
    com.apple.driver.AppleAPIC    1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
    com.apple.nke.applicationfirewall    4.0.39
    com.apple.security.quarantine    2
    com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
    com.apple.iokit.IOUSBHIDDriver    5.2.5
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.1
    com.apple.iokit.IOUSBMassStorageClass    3.5.0
    com.apple.driver.AppleUSBMergeNub    5.2.5
    com.apple.driver.AppleUSBComposite    5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.1
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOAHCISerialATAPI    2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
    com.apple.iokit.IOUSBUserClient    5.2.5
    com.apple.iokit.IOFireWireFamily    4.5.5
    com.apple.iokit.IO80211Family    500.15
    com.apple.iokit.IOAHCIFamily    2.2.1
    com.apple.iokit.IOEthernetAVBController    1.0.2b1
    com.apple.iokit.IONetworkingFamily    3.0
    com.apple.iokit.IOUSBFamily    5.4.0
    com.apple.driver.AppleEFIRuntime    1.6.1
    com.apple.iokit.IOHIDFamily    1.8.0
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    220
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.security.TMSafetyNet    7
    com.apple.driver.DiskImages    344
    com.apple.iokit.IOStorageFamily    1.8
    com.apple.driver.AppleKeyStore    28.21
    com.apple.driver.AppleACPIPlatform    1.6
    com.apple.iokit.IOPCIFamily    2.7.2
    com.apple.iokit.IOACPIFamily    1.4
    com.apple.kec.corecrypto    1.0
    Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 16 GB, SMC 1.64f5
    Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
    Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
    Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
    Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 0 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: HL-DT-STDVDRW  GA32N
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3

    There have been a few reports on here where Corsair RAM seems to have caused users a lot of grief with crashes.
    The recommendation on here, mostly, is to only buy RAM from macsales.com or crucial.com as they guarantee their modules will work and offer a no quibble lifetime guarantee.
    I'd put the original RAM back in, return the Corsair chips for a refund and re-order from one of those two companies.
    http://eshop.macsales.com/shop/apple/memory/iMac
    http://www.crucial.com/

  • I have a 1st generation time capsule and an extreme b/g. Is the extreme slowing the network down

    I have a 1st generation time capsule and an appe extreme b/g. Is the extreme slowing the network down? Should I dump it an get the new n version?

    yes it is likely to be slowing down the network because you are using 802.11b/g
    from what i recall with b/g a slow client can slow down the entire network to that clients speed.
    this was the major improvement with 802.11n and Mimo. each client can be connected to the access point without affecting your speed to the rest of the network
    its reccomended to get all new "N" equipment if you have the budget for it. some of those old airports and time capsules can still be worth something on amazon marketplace so you might be able to sell them
    if you want to create / join / extend a netwowrk your going to probably need all "n" based equipment.
    buy the new 4th generation time capsule or the new 5th generation airport they have better stronger radios
    in the mean time configure your base station router to a high multicast rate, so it will prevent devices connecting to it at 1-2 mbps speeds and slowing down your network
    if you have an apple care covered mac remember the airport / time capsule rule. all airports and time capsules purchased 2 years before you bought your mac to the 3 years of apple care covers them. if you do not have apple care then the standard warranty applies

  • Network connection extremely slow after snow leopard upgrade

    I should first state that my son's new Intel Mac Mini (2009 model) is working fine without any issues - it is on the "n" band. My wife's macbook (on Leopard) and my Thinkpad are continuing to work fine - both connecting to the "g" band of my Simultaneous Dual band AEBS.
    On my 2008 model mac mini, the installation went thru fine, but the network connection is extremely slow - it is connecting using the "g" band. Even when I launch the Airport utility, it takes a while to locate the AEBS and then when I click on "Manual Setup", it takes a very very long time to read the configuration. This tells me that the airport interface on the mac mini has some driver issue.
    I tried all the suggestions given in other threads (listed below), but none of them worked.
    1. Created a new network location and rebooted
    2. Trashed the com.apple.airport.airportutility.plist and rebooted
    3. Rebooted countless number of times - illogical, but that kicks in when I can't find a solution.
    It is past midnight here (20miles from Apple headquarter). Going to wait for another 30minutes. After that, I will use SuperDuper to install my Leopard back on my mac mini which I had cloned before starting the installation.
    Appreciate any suggestions - I am open to any prayer solution as well! If not, the Snow Leopard family pack is going back to the Apple store on Monday.
    Just saw at engadget: "On a 17-inch unibody we were putting through the paces, the WiFi inexplicably has gone out and we have yet to get it working again."
    Message was edited by: new2appletv

    Some more info about my setup:
    *Simultaneous Dual band AEBS:*
    Radio Mode: 802.11n only (5 GHz) - 802.11b/g
    Radio Channel Selection: Manual - 161 (5GHz), 6(2.4GHz)
    *Airport Express:*
    Wireless mode: Extend a wireless network
    Allow wireless clients checked under the name of the network (same as for AEBS).
    Both are WPA/WPA2 Personal security. And both the routers were upgraded to 7.4.2 firmware this morning with the hope that it will help.
    *N Devices (both working fine):*
    Apple TV 40GB
    2009 Model Mac Mini upgraded to Snow Leopard - working perfectly.
    *G Devices:*
    Thinkpad running WinXP
    Dell Laptop running WinXP
    Acer Netbook running WinXP
    iPod Touch
    iPhone 3G
    Linksys webcam
    _All of the above are working fine_.
    +2008 model Mac mini -+ upgrade to Snow Leopard shows extremely slow wifi connection that it is unusable. It takes 20min to load apple homepage. When I boot from the clone of my Leopard lying on my external drive, it works perfectly.
    I compared the settings between all the tabs of Network-->Airport-->Advanced and they are identical between Snow Leopard and Leopard mode except that SL doesn't have the "Apple Talk" tab.
    Appreciate any help to debug this.

  • My forms are extremely slow today (April 28, 2014).  Tried different computers, different networks.

    My forms are extremely slow today (April 28, 2014).  Tried different computers, different networks. Updated to the latest Flesh and used Macs and Windows, differnt browsers, firewalls on and off.  NADA.  Need help as the clients need to fill them out before May 1!!!!!

    We're very sorry that the site is having issues today, we're working hard to resolve ASAP. 
    I posted an announcement at the top of the Forums which I will update as we recover service. 
    Thanks,
    Josh Corey

  • IPhone 4 extremely slow using Safari, network timeout

    Checking on this issue for a friend... He says his network times out when trying to retrieve email from Hotmail account, as well as extremely slow loading Facebook, etc. I had him disconnect from the wireless network he is using to see if it's that. If so, any thoughts on why wireless activity would be so slow? I had him check how much space he's used on his iPhone and he tells me he's only used 2.6 GB (his phone is 16 GB).

    Is he using  an ATT or VZW iPhone..also, is he using wi-fi or the cellular data network?  If wi-fi I wonder if another non mobile device, say a laptop or something, connected to the same access point, has the same slow issues.  This article has some additional details about troubleshooting wi-fi
    http://support.apple.com/kb/TS1398

  • Video sharing extremely slow over network

    Hi Everyone, I've had a quick search through the forums to try and see if anyone has been having the same problems with me when trying to share videos (music videos, tv shows, movies etc) over a network. In itunes 7.5 I used to have no problems sharing my music or videos, now it seems like the videos are extremely slow to stream or simply won't stream at all The library shows up and music streams perfectly, but videos just seem to take forever to load, if they even load at all! As you can imagine this is a little annoying, especially if I want to sit in my theatre room with my mac mini and watch a movie streamed from my macbook pro. I've tried changing the network on my mac mini from its usual cabled network connection to using the airport, but it doesn't seem to make any difference.
    Has anyone else suffered with similar issues, and if so, is there any way to resolve them?
    Thanks in advance,
    Best Regards,
    Oliver

    You already made that point. The issue is that is not helpful if you want to use Front Row and/or a Mac as a media centre. Your workaround is fine but it is klunky. The one suggested of downgrading to QT 7.3.1 is elegant but very slow as unless you can get Pacifist to work (which I could not) it means an archive and reinstall of Leopard, and downloading all the patches again with the crucial exception of QuickTime. The good news is that Leopard does this much, much better than any previous Mac OS X and all your settings and even third party preferences should work fine. The 7.3.1 installer is still available online of you Google "QuickTime 7.3.1 Leopard". This will work perfectly unless you are renting movies.
    So, the choice is klunky, or an hour or so of re-installing.

  • My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?

    My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?

    My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?

  • I have a RCA media streamer that will not connect to my network with a new airport extreme.

    I have a RCA media streamer (Model # DSB872WR)  that will not connect to my network with a new airport extreme.I had to create a new network and  my computers are connected but media streamer will not. Can anyone help? Thank you

    Hi, papineaubill!
    Welcome to The Canon Forums, and thank you for your inquiry!
    We appreciate your participation, though we need to let you know that the Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market.  If you live outside the United States, please click here and select your country or region for your support needs.
    Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
    Thanks for choosing Canon!

  • How to clean up macpro 10.6.8 snow leopard when running extremely slow?....apple told me to get rid of "mackeeper software" but that seemed to help ...now what?

    How do I improve the performance of my Macbook Pro  (os 10.6.8) ...I previously had "mackeeper" but apple staff advised to get rid of it as
    I did not need to improve performance and this software was not apple recommended and  tends to cause more problems >   But lately my computer is running extremely slow ...Not opening programs and freezing ?.......I miss the mackeeper as it would tell me about duplicate files...temporary and "clean Up" which semed to help ...........Isnt there any way to increase performance manually ?  Help please

    Well MacKeeper comes close to qualifying as junk, as malware even, and totally takes over and interferes with a system and then is hard to uninstall and remove.
    In addition to the above, BitDefender has a free utility as well to remove adware.
    "Less is more."
    There is no real valid reason to install and use this or other apps to clean or improve system performance. Adding more RAM can help of course if yours has minimum, upgrading the system storage drive almost always helps as SSDs have gotten better and available in any system.
    the more 'stuff' that gets installed, the more problems with stability, performance, and the system working as it should.
    "Too many cooks spoil the soup."

  • Windows Explorer EXTREMELY slow at copying files from network, but robocopy works

    Hi guys,
    I'm having a REALLY BAD performance issue when copying files over from SAMBA 4 to any Windows 7 computer. To copy a folder containing 50 files with a total of 10 MB using the explorer it takes about 20 minutes (!!) at a rate of 3-5 KB/s, but when using robocopy
    the same folder takes like 3 seconds to complete. Also, the issue does not occur with older versions of Windows, like Windows XP and Windows Server 2003.
    Please please please come up with some ideas except the usuals like disabling Remote Differential Compression, disable autotuning using netsh, setting local security policies for NTML authentication or trying new switches / upgrading network drivers or windows.
    I DID IT ALL, but nothing helped!
    Thanks in advance!

    Linking in your post over on Server Fault in case it gets resolved over there first ;)
    Windows 7 extremely slow with samba 4
    Jason Warren
    @jaspnwarren
    jasonwarren.ca
    habaneroconsulting.com/Insights

  • How can I speed up logins using MacBooks to a Windows Server 2008 environment.  Logging onto the network is extremely slow.  We are using a wireless connection to the network in classrooms

    I work in an Education environment with Windows Server 2008.  I am trying to join our Macbooks to Active Directory.  They are joined but the login is extremely slow.  I read that this is because of a possible problem with an OS update.

    Check the ethernet link speed when connected directly to the TC.. if you are plugged into the modem direct.. and comparing that with wireless on the TC we have no way of knowing where the issue is.
    There is some issue related by someone when the TC was bridged.
    It is extremely hard to impossible to know what is causing wireless slow down.. needs lots more info.
    What is the link speed?
    Set manually and try different channels.
    The series 1 cannot do 2.4ghz and 5ghz simultaneously but test on 5ghz and see what the speed is like. You will need to be in the same room as the TC.

Maybe you are looking for