Networking IMac and MacBook Pro

I'm having problems connecting my MacBook Pro with my iMac. The iMac can see and communicate with the MBP but not the other way around. If I try to connect to the iMac I get a message saying that "The server “iMac” is available on your computer. Access the volumes and files locally." If I try and view the iMac screen remotely I get a recursive view of the MBP screen.
This happened under Leopard, the problem disappeared under Snow Leopard but has now resurfaced. I have remote management and file sharing set up on both machines.
I'd really appreciate a solution.
Thanks
Ally.

I have the same issue, posted here:
http://discussions.apple.com/thread.jspa?messageID=10356586#10356586
I tried your solution, but it still doesn't work. I was having intermittent problems as well... the shared folder was there sometimes, not other times. Then it seemed that only certain enclosed items were not being shared. Now I can't see it at all...
Any other suggestions?

Similar Messages

Network imac and Macbook pro Via ethernet

Hello
I am traveling with my imac and macbook pro. What is the step by step procedure using and ethernet cable to access both computers by setting up a network?
Thank You
Dick

Everything you needed to know is right here:
http://support.apple.com/kb/HT1549

I have 2 IMacs and MacBook Pro- can not work on FCP simultaneously when my network ports are on (open). How do I go about changing this?

Hi!
I have 2 IMacs and MacBook Pro and can not work simultaneously on FCP on all workstations when the network port is open. Can anyone help me on this?

Did you purchase Final Cut Pro from the Mac app store? Or install it from disk? If from disk, you may have installed it on all machines using the same serial number, and using all of them simultaneously violates the license agreement. If you purchase from the App store the licensing is different and that may not apply.

IMac and Macbook Pro no longer connecting to the Wifi?

Hi there,
I've been in London this weekend, only to return home to find issues connecting to my wifi. Weirdly, it's only the iMac and Macbook Pro having trouble, everything else is connecting fine e.g iPad, Phone, Android Tablet etc.
I'm getting disconnected around every 20 seconds and cannot figure it out! It's so frustrating as I'm wondering if there's been an update released for OS X that it has downloaded recently? Especially seeing that when I run windows from bootcamp on my iMac, it doesn't disconnect. And I also don't believe it's an issue with the hub.
Has anyone got any suggestions? I've tried removing the network and re-adding, help for about an hour but still not much use.
Thanks, Matt

Wi-FI connection drops
Wi-Fi Problems in OS X Yosemite
Wi-Fi Problems in OS X Yosemite (2)
Wi-Fi Problems in OS X Yosemite (3)
Wireless Diagnostics
Also try turning off Bluetooth.

What's the best way to share my Aperture and FCPX projects between an iMac and MacBook Pro?

Greetings,
I own both an iMac and MacBook Pro and I'm interested in figuring out the best way to have access to my iTunes, Aperture and Final Cut Pro X files not only when I'm at home using the iMac, but when I'm out and about with the MBP.
I'm sure there are others among us who require a similar setup so I was hoping you guys could share with me how you solved this little problem, and also inform me of any potential negatives for your method so that I'm well prepared. Thanks.

Best is a subjective term, as it will ultimately come down to preference. The fastest however, would be to wait until they market has a few thunderbolt drives available for purchase...
But like the first poster stated, a firewire 800 drive, would be the more convenient choice for now. Or you could set the shared folder on your iMac to be avaible on your network and use it to allow your MBP to access it wirelessly.
Obviously whatever you change, just save it back to the same folder on the iMac. Keep in mind it will not be as fast as the first suggestion (unless it is a wired network), but may be usefull for smaller files.
However, you should have everthing backed up via an external drive, that is always useful...

Connection failures between iMac and Macbook Pro

I'm experiencing frequent connection failures over my wi-fi network between my iMac and Macbook Pro on an otherwise strong, stable network. I can connect both of my computers to the Airport Time Capsule that I use as my wireless router without a problem, but for some reason I get connection failures between the computers say, 50% of the time. Sometimes it works fine, others it just hangs before giving me an error message. Any suggestions?
OS 10.9.3 on both machines
Apple Airport Extreme Time Capsule
iMac, 3.06GHz i3 (2010)
Macbook Pro Retina, 2.4 GHz i7 (1st Gen)

Hi jt in nyc,
Some checks:
Use Airport Utility on one of the machines
- Click on the Time Capsule ( enter password if prompted )
- Click on the Edit button
Under Airport Utility -> Wireless -> Wireless Options
Are the Time Capsule Wireless options set correctly?
- Country -> you know this, change if it is not
- 2.4GHz and 5GHz Channel set to Automatic
- Click on Cancel button to return to the Airport Utility graphic diagram.
- Click on the Time Capsule
- Click on your machines listed beside wireless clients
Are the machines reporting an excellent quality at different distances from the Time Machine?

Home sharing iMac and MacBook Pro: not all songs are playable

Hello
I set up Home Sharing between my iMac and MacBook Pro so that I could stream the music that's on the iMac to the MacBook Pro. On the MBP there are no songs, all of them are in Apple Lossless format on my iMac. I first tried to use "‘share my library on my local network" but because I wanted the play count to go up as well I chose for "Home Sharing". Setting up was simple. After all preferences were adjusted, I opened iTunes on the MBP and it immediately found the shared iMac library. There's now only one problem: not all songs are playable. Some don't even start. How is this possible and what do I need to do to resolve this?
FYI: the iMac is connected via ethernet to my cable modem which sends a wireless Wi-Fi signal to the MBP. Signal quality is excellent.
Also, is it possible that playcount is only available with Home Sharing and not with "share my library on my local network"?
Thanks!

It very well could be the antivirus app, most are intrusive and debilitate rather than enhance performance and should be removed using the developers instructions. You haven't really told us anything useful such as any settting you may have changed. However if you began working backwards resetting any changes and uninstalling the apps added since the performance issue started then you probably will find your issue.

Airport extreme loses internet connection all the time with imac and macbook pro

I keep losing the internet connection with airport extreme on my imac and macbook pro but NOT with my pc

Ok, so when you say you lose internet connection, is it disconnecting from your wireless network so there are no bars?
And are there usually full bars?

Connecting iMac and MacBook Pro using a non-Apple wireless router

I use a Belkin wireless router. Is there any way for me to connect iMac and MacBook Pro using the router to share files? I think I read somewhere that I need AirPort Extreme for this, but I'm not sure. Thank you.

Great resource from Dennis...file sharing, I.e. networking, is a function of the operating system settings and not the brand of router. Using Mac OS X 10.6 on both machines makes it really seamless. Following Dennis's kb article should make the two almost act like one machine.

Imac and Macbook pro can no longer see one another

I'm not sure why, but all since I upgraded to Yosemite, I can no longer see my iMac on my Macbook Pro and vice versa. I could always see the computer that I needed to connect to in finder, or I could connect with my iCloud password. As of today, I can no longer access my iMac from my Macbook Pro and that's a problem. If someone could provide directions (dumbed down version) explaining how to connect the computers from scratch, I would greatly appreciate it. I am fine with setting it up again but I can't recall how I did it. Thanks so much. I did upgrade both my iMac and MacBook pro to Yosemite over the weekend.
Model Name: iMac
Model Identifier: iMac11,3
Processor Name: Intel Core i3
Processor Speed: 3.2 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 4 G
SMC Version (system): 1.59f2
Model Name: iMac
Model Identifier: iMac11,3
Processor Name: Intel Core i3
Processor Speed: 3.2 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 4 GB
SMC Version (system): 1.59f2

Ensure Sharing preferences are set correctly for both devices.

Can some one help me reinstall my MP640 software on my Imac and macbook pro? as the software does not recognise os 10.7.5

My Imac and macbook pro stopped accessing my MP640 via the home wifi set up, so I sent all the canon software to the trash on both computers, thinking I should reinstall the software I got with the printer, but the software does not recognise os 10.7.5. I am using a netgear modem. I also use time machine to back up to time capsule.

Your Canon Pixma MP640 driver:
http://support.apple.com/kb/DL899

IPhoto not working after trying to share iPhoto between iMac and MacBook Pro

I tried to share my photos on both my iMac and MacBook pro. It deleted all my photos in my MacBook and now it won't let me even open iPhoto in my iMac and gives me the following message "You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto."
How do I rectify this? Purchase iPhoto from the App store?

What version of iPhoto do you have on each system?
It sound like you propbably have a newer version of iPhoto on the MBP - and thay you opened the iMac iPhoto library using the newer iPhoto - if you did you were warned that doing this would convert the library and that the older version of iPhoto could no longer open the library - the error message you list says that this is what you did
If you did the only options are to restore your iMac backup from before you converted the library, upgrade iPhoto on the iMac the same version you have on your MBP purchasing from the App store or use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - to downgrade your library
LN

I'm a new potential FCP X user. Can I buy software to load onto my imac and macbook pro or is FCP X only available as a download? I'd like to be able to edit on the road.

I'm a new potential FCP X user. Can I buy software to load onto my imac and macbook pro or is FCP X only available as a download? I'd like to be able to edit on the road as well as at home.

Here's a short tutorial video about how to move back and forth between your base computer and the on-the-go machine. Very important info about which things can be copied within Finder and which things MUST be copied from within FCP X. Best wishes.
stephen
http://library.creativecow.net/mcauliffe_kevin/FCPX-media-on-the-go/1

HT5268 Just purchased Imac and Macbook pro and upgrades to Mountain Lion. Java will not run with one important site where my Grandson is in Kindergarten out of state with in room camera. What to do. This is very disappointing and non of apple geniuses kno

My new IMac and Macbook Pro are each loaded with Mountain Lion. Have Office for Mac also
When I try to see my Grandson on webcam out of state the login will not activate. For PC use I needed Java and Active X to let it run. My Java is checked as ready to go but nothing happens. Otherwise these are great computers. Please help me through the process. The Geniuses at my apple store can't understand what to do.
[email protected] or [email protected]

By default, OS X does NOT come with Java installed nowadays. You need to open the Java Preferences app found in Utilities; when you do that the first time, it will inform you of the fact and offer to install the product for you.
Afterwards, due to a major security issue we had back in the first quarter of the year, the plugin is disabled by default. You need to revisit the Preferences and enable manually. It will auto-disable if unused in awhile.
Lastly, you may have to adjust which Java instance is being used, the 32-bit or the 64-bit. Default is 64-bit, but some applets crash & burn or outright refuse to run in such a platform. You can prioritize which version you prefer by dragging on top in the Preferences.

How do I get rid of the red and white compass rose used with the rotation tool...from the document? I am using a iMac and Macbook Pro OS Mavericks. CS6 no CC

how do I get rid of the red and white compass rose used with the rotation tool...from the document? I am using a iMac and Macbook Pro OS Mavericks. CS6 no CC?
any help appreciated...thank you! V

I don’t think you can.

Networking IMac and MacBook Pro

Similar Messages

Maybe you are looking for