Networking Snow Leopard to XP and Windows 7

Hi all,
I have a MacPro (OS X 10.6.3), a Pentium (Windows XP) and a Toshiba Laptop (Windows 7).
I use a D-Link DIR-825 Xtreme N Dualband Gigabit router with the Snow Leopard and Windows XP PCs, a Lexmark laser printer and an Epson inkjet connected (wired) into the back. The Windows 7 laptop is connected wirelessly). All PCs see the internet and can network print, however, they can't see each other or file share. As usual I have to ask Apple and then Microsoft for help as D-Link do not support this network query saying that it is the PCs' operating system setting that I should look at. Can anyone help?
Thanks

First all make sure in both Window systems that you allow local file sharing. For your first problem read this MacRumors thread and the posts will show you how to connect to the Windows 7 machine. Plus this Gizmodo blog article for Vista might help you.
In the D-Link router go to the router settings and give each networked device a "DHCP Reservation" address so you always know the IP of each of your networked devices.
Lastly make sure you using the same time sever in all three computers.
Good Luck.

Similar Messages

How to I run Snow Leopard, Mountain Lion and Windows 8 on my new iMac

I just bought a new iMac. My goal is to set up 3 different partions to run 3 different operating systems (Mountain Lion, Snow Leopard, and Windows 8). The reason for this post is because when I attempted to do this same thing on my old iMac ( except I was running Lion instead of Mountain Lion) I was able to create a partion that would run Snow Leopard (so I could run Final Cut Pro 6.0.6 on a more stable platform), however I totally "hosed" my old Bootcamp partition running Windows XP. The iMac won't even bootup in Bootcamp anymore. It is just a black screen and it says something about it not being a bootable drive and to insert a bootable disc.
So I need to know the best way to do this, and I want to avoid having the same problems with my new iMac that I had on my old one, especially since I have a freelance job starting next week and my client is sending me licences for software that I will need to run on Windows 8.
Thank you in advance

Use the Boot Camp Assistant to install Windows 8 and a product such as VirtualBox, VMware Fusion, or Parallels Desktop to run Snow Leopard Server in emulation. That iMac model isn't capable of being booted into Snow Leopard.
(82996)

Snow Leopard Boot Camp and Windows 7 64bit

I have a late 2006 Mac Pro with 2xDual Core 2.66ghz procs and 6 gigs of ram. I've been thinking of running Windows 7 64 bit in Boot Camp for a few games and had an EFI question. I searched thru the forum but can't seem to find an answer (possibly my own ignorance of not understanding, but that's not the point).
Since I'm running 32bit EFI will I be able to run the 64 bit version of Win7 in boot camp or am I limited to 32bit version?

It is a PITA.
Install a 32-bit version, as a mini-OS to bootstrap yourself into 64-bit;
Or, modify the DVD you will burn by editing the ISO, which can be done with VirtualBox etc.
I did it multiple times and posted a long rambling thread over on Boot Camp AD.
It is weird.
For fun, I install W7 x64 on PC, moved it over to Mac Pro and Windows gracefully just updated all the needed chipset drivers for me.
As usually, there are multiple ways to do anything.
Pull Mac drive and system, install a RAW drive or format as MBR and MSDOS, you'll want 3-4 partitions or multiple drives.
By using 32-bit version, you can then create a couple volumes.
8GB for editing the ISO and DVD or to run the installer from. This is a very fast way to do any install. Same idea works with Mac OS and restoring the DVD to disk.
When you burn Win7 DVD, do so at slow/reduced speeds.
20GB for first Win7 32-bit partition.
Whatever you want for x64.
Data volume?
A 64-bit can't be installed over 32-bit, but it will install to another volume all while you are booted into Windows 7 x32.
It took some playing around.
Modifying the ISO with a Windows utility worked, once but I never got the hang to do it again, kept getting unbootable copies and wasted DVDs.
Intel has UEFI 2.3 as the latest and I have been tempted to become EFI Group membership just to nuke the olde EFI32 - I now work mostly on a pair of i7 machines running 7.

Bash: Apple should continuously support Bash update 1.x for all prior-Snow Leopard OS X and Servers

I don't see any reason why Apple should ignore all pior-Snow Leopard OS X and Servers' Bash Update 1.0.
In my work environment, I have a mixture of Unix servers (from the old to the latest). Now, all Unix machines are vulnerable to Shellshock. It is worse than heartbleed bug. Why do Apple still let crackers have chance to attack those old Apple machines and Xserves? For God's sake, please provide Bash updates to them all. This is a historical glitch. Poor users had no choice of what version of Bash to install or remove at the time. Their securities are on Apple's hand. Apple has the responsibility to fix it.
Put it another way, on May 1, 2014, despite the end of support for the Windows XP (April 8, 2014, over 12 years since its long release), Microsoft released an emergency patch to correct a major, recently discovered security exploit in the Internet Explorer browser on all versions of Windows.
If Microsoft can do it, why Apple cannot do it better?

Don't tell us. Tell Apple.
BugReporter
<http://bugreporter.apple.com>
Free ADC (Apple Developer Connection) account needed for BugReporter.
Anyone can get a free account at:
<http://developer.apple.com/programs/register/>
And/Or
Mac OS X Feedback
<http://www.apple.com/feedback/macosx.html>

Installing Mountain Lion from Snow Leopard, Install failed and HD write-locked

I recently downloaded the mountain lion installer from the App Store and I ran the installer. Stupid person as I am, I did not have any backups for my file and I naively assumed that an apple OS installer would be without flaws. Boy, was I wrong. I need every bytes of my data (or close to every bytes) but the installer failed.
Mid installation, the installer stopped and said that the installation failed and that I need to repair my disk. So I restarted the computer and I ran disk utilities (my start up disk was the OS installer and the installer allows me to run several programs, including terminal, disk utilities, and by the way, when I held option while starting up to see which start up disks I have, I only had the OS installer as the start up disk. Also, the installer allows me to run a program called "Startup Disk" when I click on the apple logo on the top left corner, but it doesn't allow me to startup my computer using Macintosh HD) and noticed that when I highlighted Macintosh HD, my "Repair Disk" button was grayed out. So first things first, I ran the "Verify Disk" button but after a minute or so, Disk Utilities said that verification failed and that Macintosh HD needs to be repaired. But the "repair disk" button is grayed out! So I went to the Mountain Lion installer again and ran it. Of course, it failed again so I restarted the computer.
So I tried to first back up all files in Macintosh HD to an external hard drive using Disk Utilities, and I used features such as "New Image" and "Restore" but they both ended up in "Input/Output error". I tried many methods with Disk Utilities but they resulted in errors.
After some research, I noticed that some people's computers worked after they reset their PRAM. So that's what I did. I held command+option+P+R when computer started up and I reset the PRAM. When the start up disk (which is the OS installer, not the normal operating system) loaded, I was greeted with choose languages option and then I was back in the Mountain Lion installer state. I again ran the installer again, hoping something would be different, but then it was different. But not in a good way. When I was told to choose where I would like to install Mountain Lion, I noticed that Macintosh HD was grayed out. Last time, I was at least able to run the installer but this time, Macintosh HD was grayed out. The installer said that my Macintosh HD was locked. After some research, I learned that apparently, the Mountain Lion installer write-locks Macintosh HD mid installation.
So now I am stuck and I am thinking of two things (plus some questions)
1. I am wondering if there is a way to unlock Macintosh HD. But even if I can unlock Macintosh HD, there is no guarantee that the installer will successfully install Mountain Lion, am I right?
a. so how can I un-write-lock Macintosh HD?
2. More realistically, I am thinking of borrowing someone else's macintosh computer and use it as the backup center. I have a firewire cable and a terrabyte external hard drive. So what I'm thinking is that I'll hook my computer in target mode to my friend's computer and I will also plug in my external hard drive to my friend's computer and then I can download and run Carbon Copy Cloner from my friend's computer to copy all data from my Macintosh HD to my external hard drive. And then I will erase my Macintosh HD, freshly install Mountain Lion onto it and then copy all data back from my external hard drive. But I am not sure about few things.
a. it looks like my Macintosh HD is write-locked. Can I still use Carbon Copy Cloner to copy all data from Macintosh HD (in target mode) to my external hard drive?
b. will my computer allow me to erase (or format) Macintosh HD?
c. will my erased/formatted Macintosh HD able to install + be installed Mountain Lion OS?
If you are here, then you have read my long long problem. Thank you very much and I would really really really appreciate your answers and opinions. Thanks

I'm not sure where you read that about the disk being "write-locked." That doesn't make much sense, given that the major task an installer like this must achieve is writing a whole bunch of files to the hard drive. I think your source was mistaken.
As to what happened, it sounds like your hard drive was badly corrupt to start with, or possibly was on the edge of failing and is now in the process of dying entirely. If you don't have backups of your data, that does not bode well for you, unfortunately. If you can manage to use target mode to copy your data, do that.
Once you're sure you've got all your data, you need to start up from your Snow Leopard install disk and repair the hard drive. (Since it sounds like the Mountain Lion installer didn't work, I wouldn't trust the recovery partition that Mountain Lion installs.) Or, even better, just erase the hard drive entirely and reinstall Snow Leopard. Then, once you're back up and running, with all your data back on the system and with Snow Leopard updated to the most recent version, try installing Mountain Lion again. If any of that fails again, the problem is likely to be a dying hard drive, and you'll need to replace it.

I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6 and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previou

I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6)and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previous vesions. I can't even find a tab for synching. very strange. any help is appriciated.

iTunes 10.7 is compatible with Snow Leopard.
You can download it here: http://www.apple.com/itunes/

3 Beep when i try to boot Snow Leopard (after memory and sad upgrade)

Good night,
I have a Macbook Pro Later 2011 with Yosemite installed and today i tried to upgrade memory and SSD.
Memory: 16GB 1600MHz DDR3 (2x8) Corsair 11-11-11-30 1.35v
SSD: Corsair 120GB Sata 3 Force GT
After installation of my new gear, i tried to install OS X Snow Leopard through DVD and i get this 3 beep when boot start.
So i reinstalled the original hard drive, keep the new 16gb and started correctly.
Tried boot DVD again with the original hard drive and new 16gb but the 3 beep continues...
Then i removed the 16gb, but still doing this 3 beep stuff when i try boot from DVD.
I tried all combinations with new and old hardware but nothing more works...
I have changed the slots with both, the 16gb and old 4gb.
Could be the DVD corrupted?
Now im running my Yosemite with the original hard drive and the new 16gb memory without any issue.
Im already do the memory test nothing wrong appear in results
My configuration:
MacBook Pro (17 polegadas, Final de 2011)
Processador 2,4 GHz Omte; Cpre i7
Memória 16 GB 1600 MHz DDR3
Gráficos Intel HD Graphics 3000 512 MB
Could anyone help me plz?
ps. sorry for my english

The DVD's too old for that Mac. If you need to install an OS on it, connect it to the Internet and start it up with the Option, Command, and R keys held down.
(110037)

I had OS 10.5.8 on my Macbook and couldn't run turbotax 2012 because of that. I purchased Snow leopard on CD and installed it. Now, about my ABOUT this mac says 10.6.8. Now, I can't print to my Lexmark z705. I get an error message.

I had OS 10.5.8 on my Macbook and couldn't run turbotax 2012 because of that. I purchased Snow leopard on CD and installed it. Now, about my ABOUT this mac says OS 10.6.8. Now, I can't print to my Lexmark z705. I get an error message with no explanation.

Unless there are drivers provided by Apple to work with the printer, you're out of luck. The latest drivers provided by Lexmark are for OS X 10.4 Intel. Unfortunately, this can happen when slightly older peripherals and newer software don't mesh.

Running snow leopard on MBP and am not getting an sound alerts for Mail or Calendar; Have checked all setting in sound in the system preferences

Running snow leopard on MBP and am not getting an sound alerts for Mail or Calendar; Have checked all setting in sound in the system preferences

Hi..
For Mail, from your Mail menu bar (top of your screen) click Mail > Preferences then select the General tab.
Click the pop up menu to the right of New messages sound to make a selection.

My iMac says I have 10.6.8 operating system now. Problem is I do not know if that is 'Lion' or 'Snow Leopard' ... and I wish to upgrade to 'Mountain Lion'

My iMac says I have 10.6.8 operating system now. Problem is I do not know if that is 'Lion' or 'Snow Leopard' ... and I wish to upgrade to 'Mountain Lion'

That is Snow Leopard.
Upgrading to Snow Leopard, Lion, or Mountain Lion
Upgrading to Snow Leopard
You can purchase Snow Leopard by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The price is $19.99 plus tax. You will receive physical media - DVD - by mail.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
Before upgrading check that you computer meets the minimum requirements:
Snow Leopard General requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider; fees may
apply.
6. Some features require Apple’s MobileMe service; fees and terms apply.
Upgrading to Lion
First, you need to upgrade to Snow Leopard 10.6.8 as stated above.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Before upgrading check that you computer meets the minimum requirements:
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or
Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer)
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
3. MacBook Pro (Mid/Late 2007 or newer)
4. MacBook Air (Late 2008 or newer)
5. Mac mini (Early 2009 or newer)
6. Mac Pro (Early 2008 or newer)
7. Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
Am I eligible for the free upgrade?
See Apple - Free OS X Mountain Lion upgrade Program.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.

Upgraded from osx snow leopard to lion and still no iCloud

Upgraded from osx snow leopard to lion and still no iCloud settings in System Preferences, why?

I have the exact same issue, and no Profiles for me under System. My system was upgraded from 10.6 as soon as Lion came out and I've never had the icon.
I have had iCloud set up by creating an account within Mail, Contacts & Calendars - but in this setup my Mobile Documents folder, my iCloud "Documents and Data", never synchronized with my other devices. That is why I began wondering why I don't have the iCon as I have seen other Macs that came with 10.7 installed factory.

Can i buy one snow leopard 10.6 and upgrade two mac?

can i buy one snow leopard 10.6 and upgrade two mac?

The Snow Leopard license that Apple sells only allows you to upgrade one Mac. If you want to upgrade more than one computer, you have to buy the Mac OS X Snow Leopard family pack > http://www.amazon.com/Snow-Leopard-Family-Pack-5-User/dp/B001AMPP0W

My imac osx snow leopard turns off and wont recover

my imac osx snow leopard turns off and wont recover

I have an IMAC 21.5"/3.06/2X2GB/500GB/4670 year2010 with snow leopard MAC OS X 10.6.8 Yes it spontaneously shuts down while working and I cannot restart unless I disconnect the power supply.

I am running 10.5.8 and want to make use of the icloud changeover, I understand that I must first buy snow leopard 10.6 and then buy lion 10.7. Do I buy these as upgrades versions or full versions? I am not very techie, thanks for anya advice

I am running 10.5.8 and want to make use of the icloud changeover, I understand that I must first buy snow leopard 10.6 and then buy lion 10.7. Do I buy these as upgrade versions or full versions? I am not very techie, thanks for any advice.

A 10.5 era machine is better left on 10.6.8
I don't advise upgrading it to 10.7 as you'll have to buy all new versions of software for a older model machine, some are not ready yet and some of your third party driver software may not be available for your other hardware.
10.7 is slower and requires 4GB of RAM actually.
10.8 is being released this summer and it won't run on certain older graphic cards, so shortly you will be behind again.
Save your money for a new 10.8 machine. IMO
These rapid OS X upgrades are for those who like to be on the cutting edge and can afford to buy new hardware often, you didn't even upgrade to 10.6, so your not that sort of person obviously.
But you do need to upgrade to 10.6 for security issues and faster video. It will run your 10.5 Rosetta software, but 10.7 will not.
http://roaringapps.com/apps:table
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

I just update my Mac operating system from Snow Leopard to Yosemite and now have to upgrade my Epson Printer WF3540 so that it will be able to scan. Will Adobe be compatible with these softwares?

I just update my Mac operating system from Snow Leopard to Yosemite and now have to upgrade my Epson Printer WF3540 so that it will be able to scan. Will Adobe be compatible with these softwares?

Hi spiritentrep,
What Adobe software are you referring to? Are you using Acrobat? You should have no problems running Acrobat XI on Yosemite, and as along as you have compatible scanner drivers for your Epson, you should be fine there as well.
Best,
Sara

Networking Snow Leopard to XP and Windows 7

Similar Messages

Maybe you are looking for