New 2010 Mac Mini and LG 37" Full HD (via HDMI) query..

Hello all! I have just bought the new Mac Mini which I want to use along with my LG 37" (LH5000) full HD LCD TV.I have hooked them both up together via HDMI. When I first turned the Mac Mini on it detected various resolutions and choose 1080p. However, on this resolution the menu bar, dock finder windows etc all look too small when im sitting on the couch. Im only around 3 metres away from the TV.
Ive changed various resolutions, in fact the 720p resolution looks bigger and better....but surely I should be using 1080p? I was wondering if any one else out there has a similar setup and what res you would recommend I should use? There are other resolutions but I assume the other ones are all Mac (computer LCD) base.
Thanks in advance
Ben

Yes, this is a significant issue. And since Apple doesn't allow adjustment of type sizes throughout the OS, it can be very problematic.
One solution is to do as you have done and run the display at a lower resolution.
Another solution is to use the magnification tools that are provided in the Universal Access control panel (system preferences).
Screen zoom works with any scroll mouse (you do not need to buy the MS mouse that was mentioned). Just hold the Control key on the keyboard and turn the mouse's scroll wheel. I use this a lot on my Mini connected to an HDTV.
I also have the size of the mouse pointer arrow increased twofold using the universal access controls.
In the Finder, you can set the Finder preferences so that file names are listed as 16 point type (and click on the set default button). Of course the menus and sidebars are still small and Apple really needs to start offering more versatile adjustments for these other interface areas (like, dare I say it… Windows allows for).
When web browsing, you can magnify the web page in question using the COMMAND key with the + key. You can zoom back again using COMMAND and - . I use that a lot. And yes this shortcut key combo works in both Safari and Firefox.
Lastly, make sure that the sharpness adjustment on your TV isn't turned up significantly, as this will hurt the legibility of type on the screen. The lower the sharpness is set, the more readable the text will be. You'll have to strike a balance that you're happy with between text sharpness and a satisfying sharpness for the video content you watch. On my sony tv, I have the sharpness set at about 25%.
I should also mention that the type on the screen being to small to read is a sign that your screen size to seating distance ratio is outside of the ideal range. In other words, you're sitting too far from your current TV, or you could stand to have a bigger TV for the room in question. To better understand viewing distance versus HD display size, read this:
http://www.crutchfield.com/S-L3GoEoljGNL/learn/learningcenter/home/TV_placement. html

Similar Messages

  • Apple Store purchase being downgraded by new 2010 mac mini 4GB - 2GB

    Placed order for mac mini with 4GB RAM option just before the new (2010) mac mini announced. Apple kindly advised I'll be getting the new 2010 mac mini - but with 2GB of RAM - no change to pricing AUD 1100.
    Love the new 2010 mini.
    I like my workstation to be as low wattage as possible - but with heaps of RAM. I multi-task to be efficient.
    Guess I'll be able to slot 8GB in myself, but would prefer to start with 4GB - it might just be enough.

    Welcome to Apple Discussions.
    If your new Mac mini has not shipped, consider calling Apple to upgrade to 4 GB and I suspect you’ll be fine.

  • 2010 Mac Mini and OSX Lion

    Hi Everyone,
    Hoping I can get some advice.
    I have a 2010 Mac Mini and am thinking about upgrading to OSX Lion.
    Although I know my Mac meets the system requirments (Intel Core 2 Duo, 2Gb RAM), I was wondering what the performace is like on with these specs.
    I mainly use my Mac for iTunes, Safari, Twitter and iPhoto if that makes any difference.
    Thanks!

    It works ok for me, I've got a 2010 mini (base model) and am using it as a server for web, iTunes and VPN. It handles lion fine, the only quibble is that being always on it heats up during the day a lot, more so than when I had Snow leopard installed. It's not to unacceptable levels though. But as dingy and beezelbubba say, Ram is cheap nowadays and if you've got the spare cash it's always worth it.

  • 2010 Mac Mini and HDMI question

    Just bought a new Mac mini and have it hooked up to a Samsung px2370 HDMI to HDMI and as good as the picture looks I'm thinking it could look better ... And I've heard that generally a computer shouldn't be hooked up that way... The Mac mini has another mdp and the Samsung has dvi also, what are my options? All these adaptive have me stumped... Plus like I've heard On another thread the mini is thinking I have a television hooked up... Plus when the monitor was on 16/9 the menu bar was not visible and I changed it to screenfit on the monitor which worked but should I of kept it on 16/9 and adjusted it with underscan? Plz help

    It works ok for me, I've got a 2010 mini (base model) and am using it as a server for web, iTunes and VPN. It handles lion fine, the only quibble is that being always on it heats up during the day a lot, more so than when I had Snow leopard installed. It's not to unacceptable levels though. But as dingy and beezelbubba say, Ram is cheap nowadays and if you've got the spare cash it's always worth it.

  • A few questions before I buy a new iMac/Mac mini and sign up for Creative Cloud.

    Hello Everyone,
    I am looking to purchase a new Apple computer and sign up for Creative Cloud within the next week and I have a few questions that should be answered before I proceed.
    My wife and I own a business and we will be using the CS6 apps to create brochures, Constant Contact mailings, product package inserts, edit product photography for print and web use, and short HD how-to videos. We are not graphics professionals or power users and wont be doing anything too complicated.
    Any help and answers will be greatly appreciated.
    I will start with the hardware questions first:
    I am trying to decide between the iMac and the Mac mini.
    The iMac is a 2.7Ghz Quad-core Intel core i5 and comes with 4GB of memory that is expandable to 16GB, which I will do for sure. It comes with a Radeon HD 6770M graphics card with 512MB of GDDR5 memory(not upgradable), and a 1TB HDD that runs at 7200RPM. This unit meets the specs required.
    The 2.5Ghz Mac Mini comes with 4GB of memory that is expandable to 8GB, I will also do this. It has a Radeon HD 6630M graphics card with 256MB of GDDR5 memory(not upgradable), and a 500GB HDD that runs at 5400RPM. This unit meets all the spec(I think) except for the speed of the HDD.
    Question: Will the mini run the software without too much of an issue considering the speed of the HDD?
    Question: Will the iMac run the software significantly better to justify the price difference?
    I already have 1 mini(purchased 4 months ago, with the same specs listed above) and will be purchasing a second computer for my wifes desk. If the mini will run CS6 fine, that is great and we can save a few bucks. If my mini will not run CS6 well, I will get the iMac for her desk as she will be doing the bulk of the work in that regard anyway.
    Now a couple of software questions.
    After reading hundreds of reviews and forum posts over the last few days I have seen many people having this or that issue. It seems to me that most of the issues are because of upgrades from Lion to Mountian Lion after installing CS6 first or trying to open CS3,4,5 files in CS6.
    If you want to know what issues have me concerned take a look at just this one forum:
    http://blogs.adobe.com/jnack/2012/07/adobe-cs-apps-mountain-lion-no-known-issues.html
    Similar issues are discussed in the Apple forums as well as many other places around the web.
    I am not a computer professional but I know enough to maintain my systems and keep them running smoothly.
    We do not have any Adobe software installed on my mini and will not be opening any files from previous versions of Adobe product in the new CS6 software. These will be a clean installs on pristine systems running fully updated Mountian Lion OS's on both machines and creating new files from scratch.
    Question: Should I be expecting any issues like the ones I have read in the forums and blogs or are these just the normal things that happen when upgrading to new software with multiple hardware configurations?
    My feeling is that we will not be having too much of a problem due to the clean installs and no files from previous versions.
    Next up, the Creative Cloud(CC) FAQ states that you can install on 2 machines but can't open stuff at the same time.
    Question: Does this mean we can't be using any CS6 apps at the same time or just not using the same app at the same time?
    Example: PS and PS on both machines at same time = No, PS on one and Dreamweaver on the other at the same time=Yes?
    The CC FAQ page says Adobe will add Lightroom 4 later in 2012 while the main CC page lists it as available now.
    Question: Which is true?
    My mini is registered to me, with my name, iTunes account, Apple ID etc.
    Question: Do I need to do the initial set-up of the new machine with all my information to ensure the CS6 suite works on both machines? Do the computers need to be registered(as far as Apple configuration is concerned) to same person for them to work on one CC account or can I install CS6 on any 2 machines regardless of how they were initially set-up?
    This may seem like a silly question but I want to avoid any problems before they happen.
    Well, those are all of my questions at the moment. To anyone who made it this far in my looooong post, Thank You so much for your time. I appreciate your expertise and knowledge and hope that you can help me make this decision.
    Cheers,
    Alex Bogdan

    Alex,
    I'll try and answer your questions as best I can.
    Qn 1 Which Mac.
    Ans:- As I understand it both units will run Adobe CS6.
              Which one really depends on what you wand from CS6. If you are looking for high end demand and performance, then I would go for the IMac
              Your Specs for the Imac are right. However if you buy your IMac straight from Apple there are even higher specs.
              You can get:-
                                  3.4 GHz i7 processor rather than the i5
                                   2GB video card as opposed to a 1Gb video card.
                                   Of course such a model will cost you more.
              In the end it is needs compared with money to spend. That is only a decision you cam make.
    Q2:- Will the higher cost for the Imac justify copst.
    Ans:- Again it depends on what demands you intend to make on the hardware and software.
              But I note you have a business and if that businees expects to high demand and high speedy performance then I suspect the Imac would be more able to provide your needs.
              Again only you will know the answer to that.
    Q3:- Questions about CS6 reliability
    Ans:- I have been with Adobe for way over 10 years.
             Speaking, only for myself, it is the most reliable software on the market.
              It is true that if you look down this form, like any other and I am thinking about the Apple discussions forum, you will find numerous instances of problems.
              Again this is only my opinion, but although all these problems are real for the individuals:-
              First it is not clear why they have the problem e.g. what have they done or not done.
              Second, they are in the minority of the total users using the hardware / software.
              The only problem I am aware of with CS6 is Acrobat X. I understand it has been sorted Adobe, however it cost me so much work I have removed it from my system and reverted to Acrobat 9
              So what I am saying is that there are only two comapnies I rely 100% on: They are Adobe and Apple.
             So if you are happy with my opinion I would not worry about Adobe CS6
    Qn 4:- CS6 0n 2 machines.
    Ans:- Yes you will not be able to run the same program similtaneosly.
               I believe, if it is important that you do run the same program together, that you can acquire a further licience from Adobe to do that.
               You would need to contact Adobe about that.
    Qn 5:- Lightroom 4
    Ans:- Lightroom is now available as part of Creative Cloud.
    Qn 6:- Set up for individual machines
    Ans:- I do not believe you do. Once you have set up your Creative Cloud account you go to the apps site and download the apps for each machine.
              Each machine downloads the apps and your machine and the apps are registered by Adobe.
             Here is something that you may want to know:-
              Because I was so unhappy loosing all the Acrobat data with Acrobat X I ended up deleting Acrobat X
              However as far as Creative Cloud is concered Acrobat X is still on my machine.
              It is not a problem for me because I am happy with Acrobat 9, it fullfils my needs and has not crashed and lost me all my bookmarks.
              However here is the point:-
              Adobe, when there was a problem with Acrobat X requested that no-one deletes the application.
             Though I do not know for certain I believe registration of the apps you have with Creative Cloud are registered with Creative Cloud in their database. Therefore were you to delete an app, it will still be registered with Creative Cloud and you will not be able to download a further copy even though the app is no longer on your    machine.
              Therefore it maybe not a good idea to delete an app when you no longer have a use for it. If you want it back I suspect you will have to contact Adobe Support
    Personal Comment:-
              It is true many unfortunately have had all sorts of problems, including me with Acrobat X.
              That said, Creative Cloud in my view has been a major advance in how Adobe delivers software. I have no regrets with signing up to Creative Cloud and I expect to remain with it.
    Hope all of that goes some way to answering your questions.

  • Brand new 2010 Mac Mini issues....

    I took delivery of my 2010 Mini this morning.
    After initial set up I first noticed the clarity on the text is very poor compared to the AppleTV it has replaced? I also find the WiFi streaming of audio and SD video to be terrible, where the ATV which it has replaced was perfect, even when streaming HD!
    Lastly, I find it very slow, having the "spinning disc" show up whenever I try and do something? Not what you want from a fresh machine which only has Firefox installed on it so far?
    Has anyone else experienced these issues and can I rectify them? I feel like sending it back, the performance is awful for the cost of the machine.

    David.Austin.Allen wrote:
    Also, a few folks have mentioned that the cable plugged into the antenna was a bit loose. You might try opening the bottom, and making sure that the cable is properly seated.
    http://www.ifixit.com/Guide/Repair/Installing-Mac-mini-Model-A1347-Antenna-Plate /3111/1
    Thanks for that link.
    May be coincidence, but having tried the Mini upstairs where another AppleTv was sited it crept up to 54Mbps.
    Should've tried it downstairs again where it was only getting 11Mbps to see if that was still the case, but decided to check the connector - you can see the gold/brass coloured connector through the grill - using a blunt probe I touched it and it wasn't loose, but I applied some gentle downward pressure didn't seem to move, but now getting 54Mbps in the original site. Perhaps coincidence, maybe as I've disconnected the other wireless device, who knows.
    Will see how it goes for a few days but if performance falls off may take it in to be looked at.

  • I am very new to Mac Mini and need help transferring files to thumb drive

    I want to transfer the Mac Mini user guide (manual) to my thumb drive but do not find how to do it.  Help, please!

    The thumb drive is on the desktop.  This is the most embarrassing question I have had to ask in public in a long time, but, how do you drag something.  When I try by holding down my mouse on the file name I want to move it doesn't drag it just gives me several other options.  I left Microsoft for this and I know nothing about Apple computers except for my iPad.

  • HDMI audio stopped working on new 2010 Mac Mini

    I am running snow-leopard server. I have the HDMI connected to a Pioneer Elite SC-27, then via HDMI to a Panasonic Plasma TV. I get the digital picture feed just fine on the TV, but there is no audio. I checked the audio settings, SC 27 is selected as output.
    Audio was running fine earlier today... just stopped working. Anyone else experience bugs with the HDMI out audio?

    Try shutting down the computer and turning off the receiver and tv.
    Take out the HDMI cable and swap the ends and make sure it's seating fully in both ports.
    Then turn on the receiver and tv.
    Then power on the Mini and immediately hold down these 4 keys on the keyboard: COMMAND OPTION P R
    Hold them down until the computer chimes 3 times.
    See if that resolves the problem.
    If it doesn't, I would try another HDMI cable.

  • 2011 Mac Mini and Acer x222w monitor incompatible? HDMI to DVI adapter issue

    I am totally bummed because I just bought a new Mac Mini thinking I'd be able to use the display from my old system, an Acer x222w, which has both DVI-D and VGA connections. I hooked the monitor up using the HDMI to DVI adapter included in the box with the Mini. On boot, I could see the Apple logo, though it was not centered, and when the set up screen came up to the select language screen, it flashed quickly and then turned to snow.
    I was on the phone with Apple support for over an hour trying to troubleshoot this issue. I was a little disappointed that tech support didn't even seem to  be aware that the Mini came with an HDMI to DVI adapter. It was then recommended that I try an adapter for the mini display port, which the 2011 Mini doesn't have.
    I was able to borrow another monitor, a Dell with DVI-D, and it worked.
    I have searched for specs/requirements that might explain why the Acer monitor doesn't work while the Dell one does. I cannot find anything from Apple. I just assumed any DVI connection would work. Has anybody else encountered this problem? Most of the issues I've found on the forums involve trying to hook up to a home theater LCD TV, which I'm not trying to do. If I had known my monitor wouldn't work, I probably would have just saved up for an iMac.
    Thanks in advance for any thoughts or tips!

    Try resetting the SMC andNVRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
      About NVRAM and PRAM
    Next call Apple since yo have 90 days of free telephone support
    Complimentary Support (USA)

  • Just got the new 2010 Mac Pro and the Mini DVI ports are dead

    Anyone else having this issue?
    Anyone know if they need to be "enabled" somehow?

    Yes, the adapter does seem to go all the way up to the plastic shell. And the the adapters and displays work fine when driven by either of my MacBook Pros. And there seems to be some sort of connection being made because when the adapter is unplugged, the monitor goes through its typical "I'm unplugged" test mode phases with color screens and so forth, but when I plug it in to the Mac Pro, it goes black.

  • Mac mini and optical output problems

    I have just purchased a new Apple Mac Mini connected it to my Tv via HDMI and now am having problems getting the sound working.
    I have connected via optical output and the cable itself works and I can see red lights at either end.
    When plugged into the Mac the 'optical output' is greyed out(it does change when plugged in)
    When the volume control comes up it has a circle with a cross through it.I have tried what i consider most 'normal' things to try. Currently doing a update of the Mac software. Please Help, PLEASE!

    So you have connected via a Mini-Jack -> Toslink cable from the Mac Mini to your receiver? You haven't specified what cables you are trying to use. My guess from the red circle with a X through your digital output is it may not like the cable you are trying to use.
    I have the above described setup but I am able to select Digital Output in Sound Preferences. The volume control is greyed out for some reason but does not have a circle with the cross through it so I just control the volume via the receiver itself. iTunes still allows me control of volume, as do other video/audio controls in the web browser etc, it's just the main OS X volume control that is inaccessible.
    Strange, but liveable.

  • 2010 Mac Mini power cord loose? and Abode flash player bad??

    Just received new 2010 Mac Mini 2 days ago. It looks different and better features than old Mini I had.
    I am happy with newer Mini.
    Problem: The power cord loose and not good plug in.
    Need replace newer the power cord. Who I should contact to or go apple store to replace?
    Anyone use Abode Flash Player version into my new Mini because I watch Hulu.com a lot. I read some forum here and bad news about Abode Flash Player. Is true?
    Any suggestions.
    Thanks

    COME ON

  • 2010 Mac Mini, Front Row and 5.1 Audio

    I recently bought one of the new 2010 Mac mini's for my home theater. I have video going to my TV through HDMI. (I do not use the TV for audio.) I'm feeding audio to my receiver via optical. The problem I'm having is with 5.1 audio through Front Row. I've installed Perian and enabled AC3 passthrough. 5.1 audio works great when I play a video in iTunes (it also works with eyeTV). When I try to play the same movies through Front Row, I'm stuck with stereo audio and see no way to change it. Any ideas?
    Thanks in advance!

    I too have the latest mini, hooked up to a Denon receiver via pass-through HDMI.
    I am not an audiophile in terms of setting up this stuff and just want to know what I need to do to get the optimum performance out of this mini, audio wise.
    When I go to Audio MIDI Setup app, my receiver (DENON-AVAMP) is listed next to the "source" button. I have no clue about channels, bits, etc. When I click on the "Configure Speakers" button I am presented with different configurations so I selected "Multichannel" versus "Stereo". And I can see where you can test all 5 speakers and subwoofer, but I just don't know which "format" I am supposed to select.
    The 5.1 mapping is shown when I select 8 channel/16 bit, 8 channel/20 bit, or 8 channel 24 bit. I can click on each speaker in this map and it tests properly no matter which one of the above combinations I select. Just not sure which one I am supposed to be using.
    All I know is my Denon is a 5.1 system and all this works perfectly (getting 5.1 sound) with my Playstation 3 hooked up the same way to the Denon.
    Does anybody know the correct settings to output 5.1 sound from this Mac Mini?
    Thanks guys!

  • Install Windows 7 on a Mid 2010 Mac mini using USB or SD media?

    Is is possible to install Windows 7 on a Mid 2010 Mac mini using USB or SD media?  I have not figured this out.  Here's what I have observed:
    I can install OS X Lion using USB or SD media. Both are detected in the boot menu, and will boot.
    An SD card with Windows 7 installation files formatted MBR/FAT32 using diskpart appears (with an SD card icon) in the boot menu but when selected as a boot device, the boot fails and the existing OS X instance on the Macintosh HD starts.  A USB stick formatted as described does not appear in th boot menu at all.
    An SD card or a USB stick formatted as described will boot on a Mid 2011 MacBook Air, and can be used to install Windows 7.
    Is this due to EFI differences between a Mid 2010 Mac mini and a Mid 2011 MacBook Air?
    Thanks.

    The Mac Mini Mid 2010 has a DVD player built in, you can startup and install from a Windows 7 DVD. The Mac Mini Mid 2011 does not have a DVD player built in. I am happy that in new computers I can make use of an USB-stick to install Windows 7. Windows 7 uses MBR and Mac OS X uses EFI and that is why it was not possible on a Mac Mini Mid 2010. I think the EFI on a Mac Mini Mid 2011 is different.
    I should like a firmware update on my Mac Mini Mid 2010 if possible. In that case I could choose between DVD or USB stick if I want to install Windows 7.
    I also have a FireWire CF Card Reader. I think it is not possible to install Windows 7 via FireWire too.
    I do have an external USB HD with 2 partitions: Mac OS X 10.6.8 and Windows 7, but is is not possible to start up Windows 7 from the external HD.  It is possible to start up Mac OS X 10.6.8 from the external HD on a Mac Mini Mid 2010.

  • Problem with Mac Mini and Panasonic PT-AE700 projector

    I just bought a brand new Mac Mini and intended to connect it through hdmi to my Panasonic PT-AE700 projector (with a 10 m hdmi-hdmi cable and a dvi-hdmi adapter). However there is no signal recognized by the projector.
    Any suggestions? I have tried with two different dvi-hdmi adapters between the Mini and the cable. Both work fine with my MacBook Pro, but with the Mini there is no signal.
    Mac Mini   Mac OS X (10.4.7)  

    Thanks again BSteely for your answer.
    Unfortunately I still haven't been able to get anything out from the projector through HDMI.
    However, I've found someone with a similar problem. It seems the problem is the lenght of the HDMI cable (which in fact is closer to 15 m than 10 m). HDMI is designed to handle at least those 10-15 m runs, but the problem seems to be DVI, which is only capable of something around 5 m. Since I'm converting from DVI to HDMI, I'm subject to DVI's limitations. And the MBP seems to have better capability of handling the weaked signal than the Mini.
    Read more: http://www.avsforum.com/avs-vb/showthread.php?t=712218
    Gefen should have an amplifier (HDMI Super Booster) that could solve the problem. I just ordered it to see if it could help in strenghtening the signal and solve the problem for me.
    Read more: http://www.gefen.com/kvm/product.jsp?prod_id=2939
    If someone has any experience from the booster, please let me know.

Maybe you are looking for

  • If I want to save a link, the bookmarkbar map doesn't open to save the link quickly, so is there a way to make this work again in the new Firefox I downloaded?

    In the old Firefox bookmarkbar I could save my bookmarks immediatly. Now in the new Firefox 4.0.1. it's changed. I read in the support answer, that I have to click on the star on the right. Click on it again. Than decide where I want my favorite site

  • Spry menu response time problems with IE

    We implemented the spry vertical menu for showing the categories of a products catalog. It has almost 1400 categories organizad at about 5 levels, some categories have about 20 subcategories. These categories are in a coldfusion session variable. It

  • Why do i get duplicate notes?

    For some reason i have duplicates of my synced notes on my iPhone. Even my mac only displays 1, but my iPhone can show up to 4 duplicates. It makes it complicated working out which one to delete from my phone without worrying if I'm going to delete t

  • Problem running windows_imagecreator.exe

    Hi, I have downloaded all the 7 parts of Siebel Application... Now, to create image creator i tried to rum windows_imagecreator.exe file... but it gives me the following error java.lang.noclassDefFoundError: run Exception in thread "main" What could

  • Events in maintenance view

    I was trying to put some checks through event in maintenance view. It is working while creating a new entry. But in case an exisiting entry is being modified it is not working. Pls help.