New BPm Definition Problem

Hy all,
ich have the following problem. I made modification in my BPM. The modifications have been detected but in a multimapping Step (old Version 9:1 messages -> new version 10:1 messages) it continue to use the old Version of the mapping. I try to create one more time the mapping step but with any result.
Could anyone help me.
Thanks a lot
Mat

Mat,
Can you try this.....
Delete the interface mapping, Since you have created a new mapping program now activate the change list. Again create the interface mapping. Activate the changelist. In the BPM delete the trnasformation step which has the multimapping part. Activate and again insert the transformation step. Now try to use different container variable. Activate the changes list.
The point is at every step of creation/change/deletion activate the change list and check if it works. Also avoid using the same naming conventions for the objects.
thkx
Prabhu

Similar Messages

  • "New lifecycle definition" fails with "Unexpected error"

    This problem has been previously posted without resolution.
    Select "Lifecycle Definitions -> New lifecycle definition".
    Error:
    "Unexpected error, unable to find item name at application or page level.
    A severe error has occurred. Possible causes may include moving directly to a page using the browser history or Back key, multiple users attempting to change the same data or an application defect. Please visit the Support page under the Help Tab to report the error.
    Press here to return to the parent page"
    A resolution to this would be apprciated.
    Please note this problem is based on APEX 4. About to retest on APEX 3.2 to see if it is happening there.
    Edited by: user774105 on 7/03/2011 17:26
    Have back ported to 3.2 and the problem no longer occurs. Not sure what has changed between versions, but there are a number of links in the Assitant that fail with the above error in APEX 4.
    Edited by: user774105 on 7/03/2011 19:45

    Hi
    I have also encounter the same error . Currently i have apex version 4.
    User: SYSTEM
    Unexpected error, unable to find item name at application or page level.
    A severe error has occurred. Possible causes may include moving directly to a page using the browser history or Back key, multiple users attempting to change the same data or an application defect. Please visit the Support page under the Help Tab to report the error.
    Press here to return to the parent page
    Any solution for this with apex version 4
    Thanks and Regards
    Ganesan Sivaraman

  • ** Is it possible to create new BPM instance for each record (Multiline)

    Hi friends,
    In my scenario, JDBC adapter (sender) polls the open purchase order items from the table at the specified interval and send to BPM. In BPM, we used transformation step to split the messages to process each PO . The scenario is working fine. The problem is assume that if we process 10 PO, the error is in  4th PO while process, the BPM will be stopped in 4th PO. Once we correct the error, we are able to restart.
    In this case, we are not able to skip the 4th PO and process from 5th PO onwards. ie. the processing is sequential. Instead, we want to start new BPM instance for every PO. Advantage is that if 4th PO is error, only that BPM instance (work item) will be stopped. Remaining 9 POs will be completed.
    So, how do we start new BPM instance for every PO ?
    Kindly tell me, friends.
    Thank you.
    Kind Regards,
    Jeg P.

    Hi,
    There are two ways to achieve this.  In BPM and before BPM.
    Before BPM:
    Use 1 to unbounded mapping and 1 to unbounded interface mapping.
    In your mapping, make sure you create a seperate message for each PO.
    In BPM:
    Create a multiline container with you POs using a 1 to n mapping.
    Now add a ForEach block to loop through the multiline container and send each PO.
    Important:  Add an exception branch to catch any exception for each send so that the exception does not make the BPM fail.
    Regards,
    Yaghya

  • Can't get the New Entry Definition "FAMILY" Template

    Hello,
    I'm Trying to create a New entry Definition form to create tasks in a folder where I need to add some custom fields for each created task.
    The problem is that when I choose "Folder" - "Form/View Designers", later "New" - "Entry Definitions", no matter what Entry Family I choose, allways I got the same "template" with the next fields:
    - Title
    - Guest
    - Description
    - Attachments
    - Buttons
    For me, those are the fields for a "File" Entry family type and not for a "Task" Entry family type.
    I had logged into the system as administrator, and opened the "Form/View Designers", "Entry Definitions", and looked into the "Task entry (_taskEntry), and looked so much different, with so much more fields like:
    Title
    Description
    Status
    Due Date (start_end)
    Priority
    Assigned to
    Status
    Completed %
    Is very difficult to create all those fields from the scratch, I think there must be a way to create a "New Entry Definition" taking the "tasks" fields template...is there a way to do that?....
    To check if my system installation wasn't the problem, I logged into vibe.novell.com and tried to create a new task entry definition, and got the same template.
    Thank you in advance!

    The entry family has nothing to do with predefined fields. If you want the same fields like Task entry, then use copy option of the task definition.
    Regards
    Pawel

  • I have copied my iTunes library onto a new computer, but when I play back the songs there seems to be random "miss" or "drop out".  No probs with old computer, just the new one.  I'm onto my third new computer - same problem.  Any suggestions please?

    I have copied my iTunes library onto a new computer, but when I play back the songs using the new computer, there seems to be random "miss" or "drop out" during play back, similar to a small scratch on a vinyl record.  Although when I play the same song over again, the "miss" occurs in a different location during the song.  No probs with old computer, just the new one.  I'm onto my third new computer - same problem.  Any suggestions please?

    You don't say which version of iTunes you are using, but the symptoms you describe have been encountered by some users with the 64-bit version of iTunes 12.1.
    There is an alternative version for 64-bit editions of Windows here:
    iTunes 12.1 for Windows (64-bit — for older video cards)
    that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent.  The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer.  The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
    Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8).  It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
    If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

  • Visual Studio 2013 is creating new feature every time new list definition is added

    We are using Visual Studio 2013 and details are as under:
    Microsoft Visual Studio Ultimate 2013
    Version 12.0.30501.00 Update 2
    We we add a new list definition in our project, it creates a new feature with it. If we delete the feature and add list definition in the existing feature, list is created but columns are not added in the list.
    Same thing happened if we rename "Feature1", a new feature is created every time a new list definition is created.
    This doesn't happen when we add a Visual WebPart.
    Also, we have three different custom list option in the drop down in new list creating wizard.
    Is this a bug or we are doing something different.   
    http://farhanfaiz.wordpress.com

    Intellisense has a bug in VS2013 where it doesn't recognize InitializeComponent when you start working on the XAML.  My feeling is that if you try to compile this app, it will run fine (as long as there are no actual errors).
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • Can't create a new illustration. Problems occurred while saving the print file.

    I can't open a new Illustrator file. It sends me this error: Can't create a new illustration. Problems occurred while saving the print file. ID:-1
    I opened a previous document created in CC, but it will not allow me to copy and paste items from one doc to another.
    I have rebooted with no avail.
    System:
    Adobe Creative Cloud CC
    Mac Book Pro 2012
    2.6 GHz Intel Core i7
    8 GB 1600 MHz DDR3

    Is a printer connected? Is it turned ON? Is the driver up to date?
    Illustrator checks this every time and also writes information on the printer into the file.

  • Gmail on iphone was working fine until yesterday when it prompted me with the message cannot get mail user name or password for gmail is incorrect, i have tried deleting the account and re-created a new account, same problem, can anyone help?

    gmail on iphone was working fine until yesterday when it prompted me with the message "cannot get mail user name or password for gmail is incorrect", i have tried deleting the account and re-created a new account, same problem, can anyone help?

    paulcb, you're a genius, it worked, thank you so much, you don't know how much stress you have taken off my shoulders, I am constantly on my email in my iphone everyday.  Thanks a million, take care. Robert.

  • Integration of new BPM (NWDS EHP1) and Solution Manager process graphics

    Hi Experts,
    we are trying to use Solution Manager for our client's process documentation. Now, Solution Manager generates a graphic which unfortunately is almost unusable (no lanes, no transaction link, just visio-like graphic). Even the old ASAP 4.6C graphic tool was better and more interactive.
    On the other hand the new BPM in NW Developer Studio EHP1 Composition Environment seems to provide a perfect graphical tool for process modeling and documentation.
    Does anybody know if there is a (future?) possibility to integrate these two tools?
    As an alternative, does anybody have an idea how to get better Solution Manager process graphics?
    Michael Meissner

    I also digged a little into this topic since I was wondering about the different modeling techniques SAP currently provides and how they will be integrated in the future.
    [This|http://www.feedingthesapecosystem.com/2009/05/sapphire-09-part-ii-high-stakes-of.html] great blog entry about NW BPM also includes some comments about the future vision of integration between NW BPM and SolMan. It looks like in NW BPM 7.2 (planned for end of the year) there will be a "read-only" integration with SolMan processes while in the future there will be a bidirectional integration which means that BPM can import SolMan processes, enhance them and again export the models to SolMan. This is a great step further to the Common Process Layer SAP is referring in the [BPM Roadmap document|https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/003cf0a1-e8fa-2a10-7db5-ba245a663d9f&overridelayout=true].
    Cheers,
    Mane

  • Add new variable definition

    how to add new variable definition in report painter?

    Hi,
    in Transaction GR32 use menu ->Report Writer -> Variable -> Create
    regards
    Walter  Habich

  • Error Deploying and Publishing a New BPM Project

    I'm trying to Deploying and Publishing a New BPM Project (based on http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/config_guide/index.html), but the following error:
    The size of the attachment exceeds the limit of 10000000 bytes
    Thanks and Best Regards,

    Hi,
    There are two options (radio buttons) when you publish and deploy. Right now you are probably picking the second option (to publish and deploy the exported project from Studio).
    Try it again using the first option. I haven't had to do it in a while, but using this you should be able to point the Process Admin tool to your project's directory directly and not your export file.
    See if that helps,
    Dan

  • I just downloaded the new Firefox 4, rebooted, and viewed you videos re the new look and new features. Problem is, my toolbars look no different than before. The new icons you talk about do not appear on my screen. Please advise. Thank you.

    I just downloaded the new Firefox 4, rebooted, and viewed your videos re the new look and new features. Problem is, my toolbars look no different than before. The new icons you talk about do not appear on my screen. Please advise. Thank you.

    The Firefox icon is the default feature for Windows Vista and 7 only, it does not apply to Windows XP users.
    To have the Firefox icon instead of the Menu Bar:
    View > Toolbars and UNCHECK the Menu Bar.
    After that, click on the Firefox icon and you'll have the Menu Bar appear again.
    http://support.mozilla.com/en-US/kb/Menu%20bar%20is%20missing

  • Add new Printer definition

    Hi,
    We had purchase new Canon iR 2525 Printer woth dreiver UFR II LT. I had check in SPAD list but this printer definition was not there in list. I want to add new printer definition for this printer and want to load the respective drivers.
    Can you please help me how to add new printer in SPAD and load its drivers?
    Regards,
    Nisit

    Dear,
    Use SPAD , click on FUll administration then choose Devices/servers then click on output devices and then add .
    Please refer this thread
    Re: Add Printer ??

  • New Outlook sync problem after update!!!

    I had the 'original' Outlook sync problem, which went away after the iTunes update to 7.3.1, but now, after the iPhone update last night, I have an entirely NEW Outlook sync problem!!
    When I sync the iPhone, right when it gets to the 'syncing contacts' part (that you see in the top box/window in iTunes) I get an error message that I haven't seen before. It says "AppleMobileDeviceHelper has encountered a problem and needs to close..." and it gives me the option to send an error report. I dismiss the error box, and the sync process hangs, and iTunes becomes unresponsive.
    If I open Outlook, the two Apple sync oblects are still enabled, and get no error message. If I re-open iTunes and try to sync again, it only syncs iTunes content, and never even tries to sync my contacts or calendar.
    Anyone having anything similar since last night? The only thing different is the iPhone firmware update.

    I just cancelled the sync by using the slider. I didn't realize I could do that. The phone seems fine. I may try it again and see what happens.

  • My iMac keeps showing an install bar every time I reboot or restart since upgrading to OS X Yosemite. This never occurred in any of the previous OS. Is this new or a problem?

    My iMac keeps showing an install bar every time I reboot or restart since upgrading to OS X Yosemite. This never occurred in any of the previous OS. Is this new or a problem? I have an iMac (27-inch Mid 2010), Mac OS X (10.6.7).

    they moved to a progress bag instead of the spinning gear or beach ball

Maybe you are looking for