New cache size then FF restore it again to 75...

Well, i'be set a new Cache size ( Default is 75 ) to 250mb, but after a few minutes or when i close and Re-open FF the default chache is 75 insted of the new 250mb, any way to make solve this?, some config in about;config?, or in a .ini file?, any advise whould be cool.
Thx and regards!

The default value is 640000, what value should do type to have 250mb or more of cache size?
Also there is other tweak that should do to change and keep the value for the number i whant?
Sorry for my bad english, not my native language

Similar Messages

Ive had my ipod just over a year now and its deciding to play up and wipe the whole thing so its like brand new untill i sync it with itunes again, but this time it wont seem to restor the ipod just flashes white and then comes as before, Help?

As i said abouve,
Ive had my ipod just over a year now and its deciding to play up and wipe the whole thing so its like brand new untill i sync it with itunes again, but this time it wont seem to restor the ipod goes onto a black screen with the apple logo and a bar that is ment to fill up but this bar doesnt seem to be doing anything after a while it just flashes white and comes up with the sync to itunes picture.
Any help would be appreciated
Thanks
Bec

If you've had it for less than a year, then it's still under warranty. Take it to an Apple store or an authorized service facility. See http://support.apple.com/kb/HT1434

Hi i uppdate my I phone 4 to iso6 via laptop ,during the operation the laptop restart it's self then I connect my iPhone 4 to iTunes again to finish the uppdating but its stuck to Apple log tried to restor it again via iTunes i get the same stuck to logo

Hi i uppdate my I phone 4 to iso6 via laptop ,during the operation the laptop restart it's self then I connect my iPhone 4 to iTunes again to finish the uppdating but its stuck to Apple log tried to restore it again via iTunes i get the same problem its stuck to Apple logo i tried to restor it from another pc i get the same problem anyone can help please

Hi, did you ever solve this problem?
My 1 year old -- ha! one month out of warranty -- iPhone 4 has been having a nearly identical problem over the past few days.
It started by dying completely so I had the battery replaced, thinking it was simply battery issue.
It then worked again for a moment but started doing exactly what you describe, going through a reset cycle (longer than 30 seconds but who's counting). And it felt quite warm.
Did hard reset, plugged into wall charger and MBP USB but the new battery wouldn't even get a full charge (a whopping 92% after nearly two days). It would even lose battery when plugged in if I opened an app. And all the while plugged in, if I left the phone on, it would cycle through these resets. So I turned it off to try to charge it.
Now suddenly, it's dead again. Totally black, and hard reset does nothing. Up until two days ago there was nothing wrong whatsoever with this phone! And I hadn't even installed a new app that could be the root of the issue. No idea whatsoever what caused this.
Any help would be much appreciated!!

When i start up imac it goes through set up creates a new user account then starts over againj, when i start up imac it goes through set up create user account then starts over again over and over

when i start imac it goes through set up gets to creating new user account then it re boots and does it all again and again and again

Apple may still supply the original restore CDs/DVDs for a nominal fee. Have a your serial number and model information available when you call them.
AppleCare Support Phone Number: 1-800-275-2273
open 6am to 6pm Pacific Time
Apple Phone Sales 1-800-692-7753
International Technical Support Numbers
http://www.apple.com/support/contact/phone_contacts.html
"You have to call Apple & likely ask for a Product Specialist to get it (Leopard), if they still have it... helps if you tell them you have a new iPhone (iPad) that needs it!"
BDAqua
Requirements for Mac OS X v10.5
http://support.apple.com/kb/HT3759
Query by serial number "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php or

After iPad ios 5 upgrade, itunes "interrupted while restoring" restore gets error -50. iPad starts in 'configure' mode - can I configure as 'New iPad' and then restore?

After iPad ios 5 upgrade on Win7 64bit pc (x386 iTunes), iTunes gave me error "iTunes was interrupted while restoring, restore again now?" I try to restore but iTunes immediately gives error -50. Apple website says -50 is a timeout, but I have tried all fixes: changed usb ports, new cable, reset iPad, restart pc, remove sim... no good.
iPad starts in 'configure' mode, but won't restore from any of the several iTunes backups I have. Ready to giveup on 'restore'! iPad is sync'ed in iTunes, connects and syncs ok, so I don't want to lose that info.
Can someone from Apple advise - can I 'configure' as 'New iPad' and then restore or sync to recover my Apps and data etc? OR if I 'Restore' from iTunes 'Summary' tab, will I still be able to Sync to restore the iPad Apps and data?
I'm seeing a lot of frustrated Apple users online, hoping that a fix for this problem will help a few of us!! An iOS upgrade should not cause this much pain and wasted effort.

You might already have tried all of these, but just in case:
1. Make sure you have the latest version of iTunes.
2. If you're on a Windows PC, consider uninstalling iTunes and Quicktime, restarting the PC, then reinstalling. This sometimes fixes oddities.
3. Make sure you have no firewall or anti-virus running/active.
4. Try different USB cable; if you're using a cable via a hub, try connecting without the hub. On desktop PCs, the direct (non-internal-hub) USB sockets are usually at the back.
5. If yoiu haven't already done so, download the iOS5 update via the direct links I posted above
6. If using Update doesn't work, use Restore. Option-click (Mac) or Shift-Click (Windows) the Restore button in itunes.
7. Before you to the Restore, right-lick the entry for your device in iTunes and choose Backup from the drop-down menu. You may need this backup later.
If you're srtuck in recovery mode:
- There are some tips here for Windows users
http://thehowto.wikidot.com/ipad-stuck-recovery-mode
- If your device is stuck in Recovery mode, you can try putting it into DFU mode, from which iTunes should be able to Restore, as above. Details here:
http://www.tipb.com/2010/12/02/tip-put-iphone-ipad-dfu-mode/
- This link points to a utility that can help (Windows and Mac)
http://runningblind.com/post/2800674985/ipad-stuck-in-recovery-mode-for-no-reaso n
I hope something here helps

If i factory reset my ipod touch(5th gen), can i reset it as the option 'set up as new ipod', and then i can just go into the app store/itunes store and restore my music and apps and not icloud with photos and ect?

if i factory reset my ipod touch(5th gen), can i reset it to the option 'set up as a new ipod', and then i can just go into the app store/itunes store and log into my apple ID so i can just restore my music and apps and not icloud with photos, contacts, ect. and then later i can add contacts that i need/want instead of them restoring them from icloud?
The reason i asked this question is because i have been wondering this a lot ever since i got an exchange on this ipod (and ive only had it for a few weeks now) because my last ipod had a lot of problems. so after i restored my ipod with my computer/itunes, i downloaded apps that i wanted, and then when i went to the storage to see how much storage was left, it said 0 bytes. i was freaking out because i didnt know how that could be, i mean, cause like, that is impossible when i just 'purchased' it, that the space was full but i looked and all my pictures were on this ipod and i already put them on my computer so i dont need them anymore thats why i wanna reset it now so there is nothing on it so i can have more space for stuff to do and download on it.
it is updated to iOS 8 but that happened when i purchased it, so i didnt have a choice to update it even though i didnt want to update to iOS 8...
and i hope you understand my problem..
i would REALLY REALLY appreciate it if someone could tell me a solution to my problem!!! thank you so much!
-sierra

Hey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.

As I downloaded new software upgrade in my iPod nano 7 th gen and also new iTunes upgrade then all data on my iPod got erased and now when I am trying to sync it again then sync button is disabled on the windows screen . Kindly help

As I downloaded new software upgrade in my iPod nano 7 th gen and also new iTunes upgrade then all data on my iPod got erased and now when I am trying to sync it again then sync button is disabled on the windows screen . Kindly help

From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).

Hi,
Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
I have done some Google and found that we need to add something in Essbase.cfg file like below.
1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
Possible Problems
Analytic Services could not lock enough blocks to perform the calculation.
Possible Solutions
Increase the number of blocks that Analytic Services can allocate for a calculation:
Set the maximum number of blocks that Analytic Services can allocate to at least 500.
If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
Stop and restart Analytic Server.
Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting.
Determine the block size.
Set the data catche size.
Actually in our Server Config file(essbase.cfg) we dont have below data added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work? and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
Regards,
Naveen

Your calculation needs to hold more blocks in memory than your current set up allows.
From the docs (quoting so I don't have to write it, not to be a smarta***:
CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
Example
If the essbase.cfg file contains the following settings:
CALCLOCKBLOCKHIGH 500 CALCLOCKBLOCKDEFAULT 200 CALCLOCKBLOCKLOW 50
then you can use the following SET LOCKBLOCK setting commands in a calculation script:
SET LOCKBLOCK HIGH;
means that Essbase can fix up to 500 data blocks when calculating one block.
Support doc is saying to change your config file so those settings can be made available for any calc script to use.
On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact.

Is it necessary to do a backup before installing the new ios7 and then do a restore? We have 4th

I am not sure if I need to do a backup before installing the new upgrade of iOS7 and then do restore all files. I have heard of someone losing all their contacts! Any ideas please?

I would back up anything you don't want to lose. Chances are, you wont' lose a thing.....but backups are always nice to have.

HT201269 I backed up my 3GS using iTunes. I then restored the file to my new 4GS. Then I synced the apps onto the 4GS. Then I downloaded 2 custom ringtones, and attempted to sync them onto the 4GS, but it says "This Library is already synced with another

I backed up my 3GS using iTunes. I then restored the file to my new 4GS. Then I synced the apps onto the 4GS. Then I downloaded 2 custom ringtones, and attempted to sync them onto the 4GS, but it says "This Library is already synced with another phone, and if you try to sync, you will lose all of the information on the iPhone." I am a Windows user. This Sync process is VERY confusing.

How can I possibly get these two new ringtones onto the iPhone without wiping out everything else on the phone? This Sync process is nuts.
I have Backed Up the phone twice. Why would iTunes try to wipe out the phone?

HT3659 My Soundtrack pro looses the mic on AJAKona. It will appear as an input only after clicking on New audio file, then ok, Recording alert appears and then I have my AJA KONA3g back as an input option. loose it again if I change track

My Soundtrack pro looses the mic on AJAKona. It will appear as an input only by clicking on New audio file, then ok, and an Recording alert comes up. But if I change track I loose the AJA again. How do I fix this?

Finally found the answer. The recording was done at 48, the audio/MIDI settings were set to 48, but the sampling setting on the export was not, causing everything else to break down. Once all three matched the export worked and the playback audio worked without opening the clip editing screen.

New FAQ Entry on JVM Parameters for Large Cache Sizes

I've posted a new [FAQ entry|http://www.oracle.com/technology/products/berkeley-db/faq/je_faq.html#60] on JVM parameters for large cache sizes. The text of it is as follows:
What JVM parameters should I consider when tuning an application with a large cache size?
If your application has a large cache size, tuning the Java GC may be necessary. You will almost certainly be using a 64b JVM (i.e. -d64), the -server option, and setting your heap and stack sizes with -Xmx and -Xms. Be sure that you don't set the cache size too close to the heap size so that your application has plenty of room for its data and to avoided excessive full GC's. We have found that the Concurrent Mark Sweep GC is generally the best in this environment since it yields more predictable GC results. This can be enabled with -XX:+UseConcMarkSweepGC.
Best practices dictates that you disable System.gc() calls with -XX:-DisableExplicitGC.
Other JVM options which may prove useful are -XX:NewSize (start with 512m or 1024m as a value), -XX:MaxNewSize (try 1024m as a value), and -XX:CMSInitiatingOccupancyFraction=55. NewSize is typically tuned in relationship to the overall heap size so if you specify this parameter you will also need to provide a -Xmx value. A convenient way of specifying this in relative terms is to use -XX:NewRatio. The values we've suggested are only starting points. The actual values will vary depending on the runtime characteristics of the application.
You may also want to refer to the following articles:
* Java SE 6 HotSpot Virtual Machine Garbage Collection Tuning
* The most complete list of -XX options for Java 6 JVM
* My Favorite Hotspot JVM Flags
Edited by: Charles Lamb on Oct 22, 2009 9:13 AM

First of all please be aware HSODBC V10 has been desupported and DG4ODBC should be used instead.
The root cause the problem you describe could be related to a timeout of the ODBC driver (especially while taking care of the comment: it happens only for larger tables):
(0) [MySQL][ODBC 3.51 Driver]MySQL server has gone away (SQL State: S1T00; SQL
(0) Code: 2006)
indicates the Driver or the DB abends the connection due to a timeout.
Check out the wait_timeout mysql variable on the server and increase it.

Play a song from itunes? it will show the art work then skip three or four songs and start playing! How can I get it to play the songs I touch? This is a new phone but has been restored from backup. Not even all my icloud music is showing

play a song from itunes? it will show the art work then skip three or four songs and start playing! How can I get it to play the songs I touch? This is a new phone but has been restored from backup. Not even all my icloud music is showing

Hi amorg1876,
If your iPhone is skipping over certain songs, you may want to check out this article:
Troubleshooting songs that skip
http://support.apple.com/kb/TS3217
Cheers!
- Ari

When i put firefox in offline mode, and then click on pages saved in history , it can't load any pages or any images. i put cach size to 250mb but the problem is the same, it saves history for two months, but can't load pages.

when i put firefox in offline mode, and then click on pages saved in history , it can't load any pages or any images. i put cach size to 250mb but the problem is the same, it saves history for two months, but can't load pages.

Hi there,
When I inspect your site in browser tools, I'm getting 404 errors from your page:
[Error] Failed to load resource: the server responded with a status of 404 (Not Found) (jquery-2.0.3.min.map, line 0)
[Error] Failed to load resource: the server responded with a status of 404 (Not Found) (edge.4.0.0.min.map, line 0)
BarnardosIreland wrote:
I would have thought that publishing should give a complete package that doesn't need any further edits to the code and can just be directly ftp'ed to the web - is this correct?
In general, you are correct - but also your server does need to be properly configured (and those errors above lead me to think it may not be) to serve the file types that your uploading - but it could be something else entirely. Can you zip up your composition folder, upload it to your Creative Cloud files, set it to share, and then post a link here so I can download it? If you'd rather not share it publicly, can you PM me with a link to your composition files?
Thanks,
Joe

Has anyone tried getting a new phone and then giving your old phone to someone else? because if you have, did you deactivate your iphone on your support profile before so? and will the person who gets it be able to activate it as thiers again afterwards?

Has anyone tried getting a new phone and then giving your old phone to someone else? because if you have, did you deactivate your iphone on your support profile before so? and will the person who gets it be able to activate it as thiers again afterwards?

Just follow the directions here:
http://support.apple.com/kb/HT5661
That's all you have to do.

New cache size then FF restore it again to 75...

Similar Messages

Maybe you are looking for