New changes are not getting reflected in the bam reports.

Hi
I have created a BPEL process and it polls the data from a table and populate an object created in Bam.I have accomplished the above task by createing two database adaptors.One is on 10g database and another one is on Bam database.I have created a view based on the bamobject and used a database adaptor to populate the data. BPEL process is populating the data properly to that bamobject but those changes are not reflecting to bam reports automaticaly. We need to refresh the report or reprompt the report to see the changes.Could some help me to reslove this issue.
Thanks in advance
Laj Abraham

Hi charles
I have tried that option too.But that is also not working. BPEL Procees is able to populate the BAM object with the help of the sensor.But those changes are not getting reflected in BAM Reports.But if i create or update an existing record in BAM object through BAM Architect, those changes are getting reflected in BAM Reports(No manual intervention is required).
Your help in this regard is highly appreciated.
Thanks
Laj Abraham

Similar Messages

  • Termstore changes are not getting reflected in the list items in SharePoint 2010 farm environment

    Hi,
    I had created managed metadata with termstores from central admin. Then I had created one list in which added a column of type managed metadata using the managed metadata which I had created. And also added few list items to this list.
    The problem is that after updating a termstore the changes are not reflecting in the list items which were added before the update.
    I have referred the following links:
    http://www.paulgrimley.com/2011/02/managed-metadata-changes-not-applied-to.html
    http://davidfrette.wordpress.com/2010/05/26/taxonomy-update-scheduler%C2%A0timer%C2%A0job/
    According to the links we need to run Taxonomy Update Scheduler on the server for updated termstore to get reflected. After running
    this scheduler on development environment changes are getting reflected but not working on the production environment.
    Kindly help!
    Regards, Shruti

    You should check the obvious.  You made the change in dev, but did you make the change in production too?  And, is the term you updated, actually the one that you are looking at in the list item?
    There is not much, if anything, that can go wrong with that timer job. so I'd guess that the term you are looking at is not the one you think you are updating.
    If you have double checked everything (the term is is in fact the same term id), then you may have something erroring in the update process.  In this case, you should check the ULS logs for any errors.
    Chris
    Chris Givens CEO, Architecting Connected Systems
    Blog Twitter

  • Changes are not getting reflected in Process Chain after changes.

    Hello,
    I have modified a Process Chain in Development environment. I have created one new infopackage and included it in the process chain. I have also added two new change run variants in the process chain. I have collected the process chain and infopackage in a transport request and transported it to integration environment.
    Transport request has reached successfully in integration but the changes in process chain are not getting reflected. The infopackage has reached to integration after transport.
    I need some suggestion on this.
    Regards,
    Sanjay

    Hi Sanjay.......
    R u in Display mode..........click on Change mode...........
    If you can see the chain in Change mode............then ur process chain is imported in in-active version..........
    U can try activating it manually or re-transport the active version..........
    Regards,
    Debjani......

  • Chnages in the Graph properties are not getting reflected in the Browser.

    Hi,
    I have made some changes in the Graph properties in web template,
    Eg. : 1. change in color of a series for a columnar type graph
             2.change in the Text properties of Graph Series..
    When I save the template and try to run in the Browser, these changes are not getting reflected.
    Can anybody help me in this aspect ?
    Thanks.
    Regards.
    Amol Bade

    Same here :´(
    Thanks In Advance
    Juan

  • UWL : New tasks are not getting populated in the UWL

    Hi Experts,
        I<b> configured my uwl to my backend system , the completed tasks are getting populated in the UWL but the New tasks and in progress tasks are not getting populated in the UWL.(some thing strange).</b>
    When  i am trying to configure the universal  worklist system ,its givin me a caution message as  <b>System SHDCLNT012 does not support optimized delta pull</b> . where SHDCLNT012 is the system alias name.
    Is this the problem for not populating the new tasks in the UWL?
    Please provide me  the solution..
    Thanks & Regards,
    Sateesh

    Hi Sateesh,
    This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
    Kai

  • IdM 8.1 New Labels are not getting displayed after upgrading from 7.1

    We have recently upgraded IdM 7.1 to IdM 8.1 and after upgrading the New Labels as New Navigation Menu's in Admin panel are not getting resolved and
    Appearing following way
    UI_APPR_XML_PROVISIONER_EMPTY_TABLE
    UI_APPR_JAVA_LIST_PROVISIONING_REQUESTS_LABEL
    We have checked these labels are there under WPMessages_en.properties file (under idmcommon.jar) but still they are not getting reflected.
    Any help on this will be appreciated.

    May be your location credentials out of sync.
    Un-register and re-register the locations
    1)Right click the location in the Control Center manager and select Unregister
    2)Right click the location in the Control Center manager and select Register and enter the appropriate credentials.

  • Whenever a record is Edited the rows are not getting displayed in the repor

    Hi all,
    When a new record is added or edited, It is physically getting added or edited according to the process, but those records are not getting displayed in the report..
    Please Any body faced this situation...
    Help me to identify what error i am doing........
    thanks in advance
    kavitha L

    Hi KChamarti,
    I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
    My item renderer is:
              <mx:DataGridColumn headerText="Type">
                   <mx:itemRenderer>
                     <mx:Component>
                      <mx:HBox verticalGap="2">
                          <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                          <mx:Label text="{data.type}"/>
                        </mx:HBox>
                     </mx:Component>
                   </mx:itemRenderer>
                </mx:DataGridColumn>
    Am i mentioning the source of the image in the right way?

  • Reg:tasks are not getting displayed in the uwl mss for particular user

    hi all
    Tasks are not getting updated in the MSS under tasks tab for particular user in EP.can any one please share their exp and knowledge on this how to reslove it.
    Thanks in advance.
    Deepika

    Hi Sateesh,
    This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
    Kai

  • OLE images are not getting transfered to the pdf format

    After executing the oracle report file 6i and while sending the report file directly from the report screen to the microsoft outlook mail by clicking the mail option from the report, the OLE Images are NOT getting converted to the mail attachment. Rest of the data is getting converted fine.

    hope this is not the correct forum to place this question.
    if not, mention DB and OS versions and state your problem more clearly
    mark answered post as helpful / correct*

  • Partner details are not getting captured to the purchase order from the ven

    Hi,
    Issue : ( ECC PO)
    Partner details are not getting captured to the purchase order from the vendor master.
    We found that the partners are not getting captured in ECC PO's automatically from the vendor master. We checked for all the config and everything seems to be o.k, but could not figure it out.
    Any suggestions are highly appreciated.
    Regards
    Sudhakar

    Hey Sudhakar,
    I believe what is happening here is that the ECC PO document type has not been assigned to the partner determination procedure.
    If this is working properly for standard POs, then,
    Go to Partner detrmination under Purchasing>  Partner Settings in Purchasing Documents> Assign Partner Schemas to Document Types.
    and enter teh appropriate document type and refer it to the procedure you have for NB Pos

  • The payment terms are not getting reflected in PO

    Hi,
    We are in SRM5.0 Extended Classic scenario.
    We have created new payment term in ECC and transferred to SRM using BBP_UPLOAD_PAYMENT_TERMS and after tranferring it to SRM I am able to see the new payment term in table BBP_PAYTERM and BBP_PAYTERM_TEXT in  SRM system.
    But non of the payment terms are not reflecting into PO. We are not getting any errors while processing the PO.
    Could you please suggest what may be the issue here.
    Best Regards,
    Siddappa

    Hello Siddappa,
    I am a little confused here with the scenario.
    I understand that the payment terms are recenly created and replicated. So naturally they would have been updated in the relevant vendor master as well. Now has the vendor master been replicated to SRM from ECC once the payment terms were updated.
    So from what you have mentioned "When we check the BBP_PD, the payment term is reflecting for the POs created after shopping cart approval."
    So does this mean once the SC is approved then the PO is created and then the Terms of Payment are seen in the PO.
    However "If the PO created through describe requirement, the Vendor will not assigned the PO created will go to Held status and buyer will process the order."
    So does this mean since the Vendor is not mentioned the Terms of Payment is not being reflected and will happen only once the same is specified in the PO.
    I have a question on whether after replicating the Payment Terms, has it been seen in any of the PO's created so far or it is always blank.
    Regards
    Pramod

  • Portal Forms are not getting displayed in the new oracle environment.

    Hi All,
    The Forms in our Portal applications are not getting displayed after we have done the upgradation of Database in Unix from 8i to 9i. The reports are working fine.The forms that were added as portlets are not getting displayed and other forms that are called thorough links returns error when it is run. The Newly created forms are also not running but returns error. The Portal Version is 3.0.9.8.3. Pls help.
    Regards,
    Tom

    Hi ,
    Based on the requirement , check whether the customer contact has been done carried out for the invoice  , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection .

  • Values in parallel flow are not getting reflected

    Hi ,
    I have split in one of my auto activity.In this split one of flow I am changing instance variable (boolean) value.But this value is not getting reflected in second flow.Is there any way to set this value.
    Please help me
    Thanks
    Sailendra

    Yes - you can use your Split / Join design pattern for what you're trying to do. You just need to add one more thing.
    This is going to take a knowledge of:
    <li> Correlation - initiate and terminate methods
    <li> Notification using logic from a screenflow and
    <li> Message Wait activity with an Interrupt property
    It might seem like a lot, but if all you have is JMS then it's what I'd suggest.
    1. Create a correlation just after the Split and before your Automatic activity. The purpose of this correlation is to be the receptor of a notification when you want to eliminate the time loop. The logic for this looks like this:
    args[] = clientCaseId
    args[] = productId
    Correlation.initiate(name : "documentRetrieval", values : args)2. Add a Message Wait activity in your process. If you call it "WaitForEarlyReleaseCompletion" you might find that the logic in the step 4 is helpful. Have its property set to "Allows interruptions" and "External". Add this activity outside of the process's flow. Right mouse click the Messsage Wait activity -> click "Argument Mapping" -> click on the arguments icon in this dialog and add the (two in the example) argument variables you want to use to notify the correlation (clientCaseId and productId in this example). Click the "Correlations" icon in this dialog (two to the right of the arguments icon). In the left panel add a new correlation (name it case sensitive "documentRetrieval" for this example). Right click this new correlation and give it properties (the variables you want to use for the correlation - in this example "clientCaseId", "productId". Select the correlation and click the right arrow to move the correlation to the upper right portion of the dialog. Leave "Initiate" set to "No". In the lower right portion of the dialog, map the correlation's properties (again clientCaseId and productId in this example) to the incoming argument variables you just created (also called clientCaseId and productId in this example). Click OK
    3. This standalone activity needs to flow to an Automatic activity outside of the process. The logic in this Automatic activity needs two lines:
    // this assumes your time interval in your due transition is called "myTimer" and you just
    //   want to stop it
    myTimer = null
    action = BACK4. Inside your screenflow, in an Automatic Task send a notification to the Message Wait activity using the same correlation values (e.g. "clientCaseId" and "productId") you used earlier in the correlation intiate method.
    args as Any[Any]
    args["clientCaseId"] = clientCase.clientCaseId
    args["productId"] = clientCase.products.first.product.productId
    send(Notification, processId : "/DepartmentApprovals",
                                            activityName : "WaitForEarlyReleaseCompletion",
                                            arguments : args,
                                            argumentSetName : "WaitForEarlyReleaseCompletionIn")Dan

  • Portal events are not getting loaded into the Analytics database tables

    Analytics database ASFACT tables (ASFACT_PAGEVIEWS,ASFACT_PORLETVIEW) are not getting populated with data.
    Possible diagnosis/workarounds tried:
    -Checked the analytics configuration in configuration manager, Enable Analytics Communication option checked
    -Registered Portal Events during analytics installation
    -Verified that UDP events are sent out from the portal: Test: OK
    -Reinstalled Interaction analytics component
    Any inputs highly appreciated.
    Cheers,
    Sandeep
    In collector.log, found the exception:
    08 Jul 2010 07:12:54,613 ERROR PageViewHandler - could not retrieve user: com.plumtree.analytics.collector.exception.DimensionManagerException: Could not insert dimension in the database
    com.plumtree.analytics.collector.exception.DimensionManagerException: Could not insert dimension in the database
    at com.plumtree.analytics.collector.cache.DimensionManager.insertDB(DimensionManager.java:271)
    at com.plumtree.analytics.collector.cache.DimensionManager.manageDBImage(DimensionManager.java:139)
    at com.plumtree.analytics.collector.cache.DimensionManager.handleNewDimension(DimensionManager.java:85)
    at com.plumtree.analytics.collector.eventhandler.BaseEventHandler.insertDimension(BaseEventHandler.java:63)
    at com.plumtree.analytics.collector.eventhandler.BaseEventHandler.getUser(BaseEventHandler.java:198)
    at com.plumtree.analytics.collector.eventhandler.PageViewHandler.handle(PageViewHandler.java:71)
    at com.plumtree.analytics.collector.DataResolver.handleEvent(DataResolver.java:165)
    at com.plumtree.analytics.collector.DataResolver.run(DataResolver.java:126)
    Caused by: org.hibernate.MappingException: Unknown entity: com.plumtree.analytics.core.persist.BaseCustomEventDimension$$BeanGeneratorByCGLIB$$6a0493c4
    at org.hibernate.impl.SessionFactoryImpl.getEntityPersister(SessionFactoryImpl.java:569)
    at org.hibernate.impl.SessionImpl.getEntityPersister(SessionImpl.java:1086)
    at org.hibernate.event.def.AbstractSaveEventListener.saveWithGeneratedId(AbstractSaveEventListener.java:83)
    at org.hibernate.event.def.DefaultSaveOrUpdateEventListener.saveWithGeneratedOrRequestedId(DefaultSaveOrUpdateEventListener.java:184)
    at org.hibernate.event.def.DefaultSaveEventListener.saveWithGeneratedOrRequestedId(DefaultSaveEventListener.java:33)
    at org.hibernate.event.def.DefaultSaveOrUpdateEventListener.entityIsTransient(DefaultSaveOrUpdateEventListener.java:173)
    at org.hibernate.event.def.DefaultSaveEventListener.performSaveOrUpdate(DefaultSaveEventListener.java:27)
    at org.hibernate.event.def.DefaultSaveOrUpdateEventListener.onSaveOrUpdate(DefaultSaveOrUpdateEventListener.java:69)
    at org.hibernate.impl.SessionImpl.save(SessionImpl.java:481)
    at org.hibernate.impl.SessionImpl.save(SessionImpl.java:476)
    at com.plumtree.analytics.collector.cache.DimensionManager.insertDB(DimensionManager.java:266)
    ... 7 more
    In analyticsui.log, found the exception below:
    08 Jul 2010 06:50:25,910 ERROR Configuration - Could not compile the mapping document
    org.hibernate.MappingException: duplicate import: com.plumtree.analytics.core.persist.BaseCustomEventFact$$BeanGeneratorByCGLIB$$6a896b0d
    at org.hibernate.cfg.Mappings.addImport(Mappings.java:105)
    at org.hibernate.cfg.HbmBinder.bindPersistentClassCommonValues(HbmBinder.java:541)
    at org.hibernate.cfg.HbmBinder.bindClass(HbmBinder.java:488)
    at org.hibernate.cfg.HbmBinder.bindRootClass(HbmBinder.java:234)
    at org.hibernate.cfg.HbmBinder.bindRoot(HbmBinder.java:152)
    at org.hibernate.cfg.Configuration.add(Configuration.java:362)
    at org.hibernate.cfg.Configuration.addXML(Configuration.java:317)
    at com.plumtree.analytics.core.HibernateUtil.loadEventMappings(HibernateUtil.java:796)
    at com.plumtree.analytics.core.HibernateUtil.loadEventMappings(HibernateUtil.java:652)
    at com.plumtree.analytics.core.HibernateUtil.refreshCustomEvents(HibernateUtil.java:496)
    at com.plumtree.analytics.ui.common.AnalyticsInitServlet.init(AnalyticsInitServlet.java:104)
    at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1161)
    at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:981)
    at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4045)
    at org.apache.catalina.core.StandardContext.start(StandardContext.java:4351)
    at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:791)
    at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:771)
    at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:525)
    at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:920)
    at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:883)
    at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:492)
    at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1138)
    at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
    at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:117)
    at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1053)
    at org.apache.catalina.core.StandardHost.start(StandardHost.java:719)
    at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
    at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
    at org.apache.catalina.core.StandardService.start(StandardService.java:516)
    at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
    at org.apache.catalina.startup.Catalina.start(Catalina.java:566)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.plumtree.container.Bootstrap.start(Bootstrap.java:531)
    at com.plumtree.container.Bootstrap.main(Bootstrap.java:254)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at org.tanukisoftware.wrapper.WrapperStartStopApp.run(WrapperStartStopApp.java:238)
    at java.lang.Thread.run(Thread.java:595)
    08 Jul 2010 06:50:25,915 ERROR Configuration - Could not configure datastore from XML
    org.hibernate.MappingException: duplicate import: com.plumtree.analytics.core.persist.BaseCustomEventFact$$BeanGeneratorByCGLIB$$6a896b0d
    at org.hibernate.cfg.Mappings.addImport(Mappings.java:105)
    at org.hibernate.cfg.HbmBinder.bindPersistentClassCommonValues(HbmBinder.java:541)
    at org.hibernate.cfg.HbmBinder.bindClass(HbmBinder.java:488)
    at org.hibernate.cfg.HbmBinder.bindRootClass(HbmBinder.java:234)
    at org.hibernate.cfg.HbmBinder.bindRoot(HbmBinder.java:152)
    at org.hibernate.cfg.Configuration.add(Configuration.java:362)
    at org.hibernate.cfg.Configuration.addXML(Configuration.java:317)
    at com.plumtree.analytics.core.HibernateUtil.loadEventMappings(HibernateUtil.java:796)
    at com.plumtree.analytics.core.HibernateUtil.loadEventMappings(HibernateUtil.java:652)
    at com.plumtree.analytics.core.HibernateUtil.refreshCustomEvents(HibernateUtil.java:496)
    at com.plumtree.analytics.ui.common.AnalyticsInitServlet.init(AnalyticsInitServlet.java:104)
    at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1161)
    at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:981)
    at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4045)
    at org.apache.catalina.core.StandardContext.start(StandardContext.java:4351)
    at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:791)
    at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:771)
    at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:525)
    at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:920)
    at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:883)
    at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:492)
    at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1138)
    at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
    at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:117)
    at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1053)
    at org.apache.catalina.core.StandardHost.start(StandardHost.java:719)
    at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
    at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
    at org.apache.catalina.core.StandardService.start(StandardService.java:516)
    at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
    at org.apache.catalina.startup.Catalina.start(Catalina.java:566)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.plumtree.container.Bootstrap.start(Bootstrap.java:531)
    at com.plumtree.container.Bootstrap.main(Bootstrap.java:254)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at org.tanukisoftware.wrapper.WrapperStartStopApp.run(WrapperStartStopApp.java:238)
    at java.lang.Thread.run(Thread.java:595)
    wrapper_collector.log
    INFO | jvm 1 | 2009/11/10 17:25:22 | at com.plumtree.analytics.collector.eventhandler.PortletViewHandler.handle(PortletViewHandler.java:46)
    INFO | jvm 1 | 2009/11/10 17:25:22 | at com.plumtree.analytics.collector.DataResolver.handleEvent(DataResolver.java:165)
    INFO | jvm 1 | 2009/11/10 17:25:22 | at com.plumtree.analytics.collector.DataResolver.run(DataResolver.java:126)
    INFO | jvm 1 | 2009/11/10 17:25:22 | Caused by: java.sql.SQLException: [plumtree][Oracle JDBC Driver][Oracle]ORA-00001: unique constraint (ANALYTICSDBUSER.IX_USERBYUSERID) violated
    INFO | jvm 1 | 2009/11/10 17:25:22 |
    INFO | jvm 1 | 2009/11/10 17:25:22 | at com.plumtree.jdbc.base.BaseExceptions.createException(Unknown Source)

    Key words from the error msg suggests reinstallation of Analytics is needed to resolve this.Analytics database is failing to get updated with the correct event mapping and this is why no data is being inserted.
    "Could not insert dimension in the database",
    "ERROR Configuration - Could not configure datastore from XML
    org.hibernate.MappingException: duplicate import: com.plumtree.analytics.core.persist.BaseCustomEventFact$$BeanGeneratorByCGLIB$$6a896b0d"
    "ORA-00001: unique constraint (ANALYTICSDBUSER.IX_USERBYUSERID) violated",
    "ERROR Configuration - Could not compile the mapping document

  • TDS line items are not getting reflected in J1INCHLN

    Hi Experts,
    While generating TDS challan we are not getting advance line items in J1INCHLN screen
    We made one advance payment which included 2 payment line items and two different tax codes, while generating TDS challan its is showing only one TDS line item that is Rs.1000/-, another TDS line item of Rs.966/- is not showing.
    Below is the example
    XYZ                                                                         43,000.00
    XYZ                                                                         46,000.00
    Bank                                                                        96,329.00-
    S/Tax Interim-In Cr                                                    5,160.00
    S/Tax Interim-In Cr                                                   3,864.00
    ST Interim E.C-In Cr                                                 103.00
    ST Interim E.C-In Cr                                                 77.00
    ST Inter H E.C-In Cr                                                 52.00
    ST Inter H E.C-In Cr                                                 39.00
    TDS Pble Contractors                                              966.00-
    TDS Pble Contractors                                              1,000.00-
    I checked the below possibilities for reason why its not getting reflected
    Vendor master having recipient type
    WITH_ITEM table updated with recipient type
    In the line item also having Business Place and section code
    Please suggest me is there any way to resolve the issue.
    Thanks & Regards,
    AIM

    Hi,
    Check whether the recipient type CO or OT is updated in With_item table for the line items that are missing in J1INCHLN.
    If Recipient type is not maintained in vendor master, at the time of posting the entry, then it does not get picked up in J1INCHLN. Even if you maintain in Vendor master later on, the With_item table does not get updated. This is one of the reasons why the line items does not get picked up in J1INCHLN. Check this, as you are confirming that Business Place, Section code etc.. are all present in line items and also that it is appearing correctly in With_item table.
    Regards
    Divya S

Maybe you are looking for

  • Path of assigining chart of accounts to company code

    Hi can anyone tell me the path of assigning chart of accounts to company code (t.code OB62) in ECC6. thanx in advance

  • Avoid Duplicate Named Ranges when copying a sheet from one wb to another with the worksheet.copy method

    I have a template monthly report with about 30 pages and 50+ users. Each user makes some modifications to their copy so they are loathe to adopt any new version. My solution is to migrate their data, etc across to the new version. I've solved many of

  • Can't import anything into Final Cut 7.0.3

    I just recently updated my OS to Snow Leopard (10.6.7) along with Final Cut Pro 7.0.3. and now for some reason Final Cut does not recognize anything, video, audio, stills, nothing. I've found a workaround for video files, save as itself in Quicktime.

  • SplitterPanelWidget crash using kBindAll in CS3

    I want to divide a panel in 2 regions using a SplitterPanelWidget. The widget is working as expected and I can fill it with other widgets. Since I have a resizable panel in a palette I want the SplitterPanelWidget to fill the whole panel. But as soon

  • Subscribe to podcast issue

    Hi, I'm sure this question has been posted a lot elsewhere, but I can't find a solution that works. So... When I (or my mates) attempt to subscribe to my podcast (I'm using firefox), a page with the following text appears "This XML file does not appe