New computer cannot see cFP-2000 via ethernet

I set up a cFP-2000 block to connect via ethernet on my computer fine (directly connected, not through a network).  Now I want to connect it to a different computer and I can not get MAX to see the device.  I have a crossover cable from my new computer to the cFP-2000.  When I open max, it will not see that there is a device connected in the remote systems section.  What do I need to do to get the new computer to see the cFP unit I have hooked up?  I am running Windows 2000, Labview 7.1, and Fieldpoint 4.1.
Steve

Ok, still no luck.  Here is what I have tried:
Assigned the exact same IP address to the new computer as the first computer.
Also tried just obtaining automatically.
Assigned the same subnet mask (255.255.0.0) to the new computer as the old computer (and same as Fieldpoint).
Tried playing with the network port changing the duplex settings.
Tried using a hub to connect.  The hub worked if I tried to connect to the first computer that I set up the fieldpoint on, then it wouldn't work with the new computer.
When I connect the ethernet cable from the new computer to the cFP-2000, I don't get any lights. 
I am pretty lost as to what is going on here.  I have no problem connecting to the cFP-2000 when I have it hooked up to the computer I first configured it on.  Then when I connect it exactly the same way to a new computer, I can't see it in my remote systems and there are no green or yellow lights on the FP ethernet connector.
Steve

Similar Messages

  • I have a brand new mini mac and a new apple TV. Both have been updated and can see my movies in itunes. I can use Netflix and stream music. I have tried to use my old laptop and it streams video fine. But my new computer only see a spinning circle.

    I have a brand new mini mac and a new apple TV. Both have been updated and can see my movies in itunes. I can use Netflix and stream music. I have tried to use my old laptop and it streams video fine. But my new computer only see a spinning circle.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.

  • I have two computers connected to my Apple ID which belonged to my partner who recently dieds and bneed the spaces for new computer Cannot dauthorize all because this is already done

    I have two computers connected to my Apple ID which belonged to my partner who recently dieds and bneed the spaces for new computer Cannot dauthorize all because this is already done?

    Have you tried repairing disk permissions : iTunes download error -45054

  • MB Pro CD2 cannot see LW 320 via AsantéTalk

    I have an old LW320 that is available to six computers on the ET network without problem. My new MB Pro cannot see the LW320 directly, only as a shared printer. Tried switching AppleTalk on/off, new user account, connecting directly to AsantéTalk rather than via hub/Airport etc, running all the options in Printer Setup Repair, even the old favourite of repairing permissions. No go. I have not yet done an archive and install. Any ideas, please?
    MB Pro CD2, 5 other Macs   Mac OS X (10.4.8)  

    I am sorry if I have offended you in some fashion. It was certainly not intentional.
    Your flip response did not indicate whether you have, in fact, opened the Directory Access Utility. This is not the same as turning AppleTalk on and off using the Network preference pane. If you have not already done used the Directory Access utility, I recommend it highly.

  • TS4036 New Computer cannot play songs

    I have bought a new computer and tried to upload my albums and songs from ICloud.  I can see them in my itunes app. but cannot play them as it says "cannot be loctated".  How do i sort this?

    Greetings mantarunner, 
    Thank you for participating in the Apple Support Communities. 
    I know it can be frustrating to be asked repeatedly to authorize your computer when it is already authorized. Deauthorizing all computers, and then reauthorizing the one computer was a good step. 
    You can find some additional tips to help resolve this situation in this article:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases - Apple Support
    Sincerely,
    Jeremy

  • New computer/cannot sync music

    i got a new computer, so all my music was deleted. i spent forever re-adding everything. and now when i try to sync it, a message comes up saying.. "ipod cannot be synced. the required disk cannot be found."
    its driving me crazy. someone please help!
    also, i cannot update or restore it.

    Welcome to the forums, Lisaaa
    Well, you can always try the good ol' restart. Hold down the center an menu buttons on the iPod until the screen goes black and you see the apple logo. This won't change anything on the iPod, but it can clear up temporary bugs. Also, make sure that your computer is authorized to play your music.
    The "required disk cannnot be found" part could mean that some of the music is stored on a different hard drive. make sure that all the hard drives that contain parts of your library are connected.

  • New computer - cannot reinstall CS2

    I got a new computer, and cannot install CS2 Windows. It is an upgrade. I have Photoshop 5 and Illustrator 8 on the machine, however the installer keeps telling me it cannot find Photoshop and therefore will not install. I contacted Adobe, who told me that since CS2 is "old" they will not help me reinstall it unless I pay $99. Quite frankly I am completely upset since I've been using several Adobe products for years.
    Anyway, can anyone tell me how to get CS2 to install? I am on Windows XP Pro.

    I don't remember the technical requirement for installing CS2 but I do remember a bug that would keep the installer from seeing an earlier version if you tried to validate the install by simply inserting the CD. It wouldn't work on a DVD drive.
    That said how did you get it installed on your old computer? If you didn't need to call then there's a bug in the CS2 installer that fails the verification if trying to do it by inserting a CD into a DVD drive. If that's the case, use a CD drive. Depending on your O/S you could also try installing PS 5 (but I wouldn't do that with Vista.
    Bob

  • New Computer Cannot Open Old Encrypted Emails

    I have a user that has recently been set up on a new computer copying their .pst from an older system.
    The previous computer was running Windows 7 32bit w/ Office 10 and the new one is running Windows 7 64 bit w/ Windows 10.
    The user can open recently received encrypted emails but cannot open emails prior to the date they were moved to the new system. I have removed and reinstalled their credentials and exported them as well but to no avail.
    Any suggestions on recovering access to encrypted emails prior the creation date of their new profile on the new computer?

    Was the "old" Digital-ID installed/ imported into Outlook after setting up the new workstation?
    Mostly the reason for such behaviour would be missing private key matching the public key the messages were encrypted with. You won't be able to decrypt the mails without it.

  • IRecruitment: New users cannot see jobs as candidates

    Hi
    I´m experiencing a problem with iRecruitment. All the people in my company have an Oracle user associated to their corresponding person. The ones created long before (i don´t know exactly when, maybe when iRecruitment was implemented), can connect using the employee candidate resp. and search for jobs without problem. The new created users also connect with the same responsibility, but they cannot see any job. I´ve run the following programs with no success:
    - Synchronize WF LOCAL tables with the following values for the “Orig System” parameter:
    1. PER_ROLE
    2. FND_RESP
    3. FND_USR
    - Sync responsibility role data into the WF table
    - Workflow Directory Services User/Role Validation
    Any idea?
    Thank you in advance

    Thanks guys. I finally solved it. We have a security policy activated to prevent users to see certain info (such as salaries) thru the app or database. One of the tables was per_all_vacancies. So we granted the profile value associated to that policy to these users and now they are able to search for vacancies. Thank you all of you for your help and effort. I´ve noted down all your suggestions so i can solve future problems regarding irec.

  • Time Capsule as WDS Main won't see NAS connected via Ethernet

    Here is a weird one - I hope someone can help as I am at wits end! I have a Time Capsule configured as a WDS Main with an AEBS as a remote. I also have an iomega StorCenter that I use as my NAS. I have a variety of other devices that require network connections (DVR, slingbox, etc) which is why I have both the Time Capsule and the AEBS. Here is the weird part, when connecting the iomega via ethernet to the remote in the WDS chain (the AEBS) an IP is assigned (I am using the timecapsule as the DHCP and assigning IP ranges) and all is well, the device joins the network and I go merrily on my way. Now when I do the same action, connect the iomega via ethernet to the main (the Time Capsule) in the WDS chain - which is my desired configuration, I cannot connect. Does anyone know why this would be? Is there an issue with Time Capsule serving as a WDS Main and assigning IP addresses to hard-wired (ethernet) devices? I can confirm that the Time Capsule assigns an IP to the storage device when it is connected to the relay station. Any help would be appreciated. I have spent hours on this. Thank you so much!

    The trick was connecting my axpress directly to the Imac via ethernet. From that point on everything went smoothly. No need to reply to this one.

  • Cannot configure Airport Express via ethernet cable

    I am trying to configure my new Airport Express, in order to stream music to it.
    I have a wireless switch/router (Linksys), but DHCP is disabled.
    My mac has no wireless card, it is connected via cable, on 100Mbps port.
    A friend advised me to connect the AE directly via Ethernet cable, in order to first configure it.
    I connected the AE to the router, and the Mac (in the Airport Setup wizard) tells me that "No airport card is installed" (correct). I then click on "Continue", and I can choose between "Configure a new Airport station" and "Modify...".
    If I select "Configure...". I get the following message (I am translating from french): The Wizard detected a new Airport Express called "Base Station 5f6281". Good!
    But If I click "Continue", it will report "An orror occured when contacting the selected Airport station".
    What should I do?
    If, instead of selecting "Configure..", I try to "Modify an existing configuration", I have the same when I then click on "identify". What is the trick?
    Thanks for your help
    Robin

    Follow the instructions posted here by David Lovell (which work equally well for Macs and PCs):
    David Lovell, "Airtunes for XP with a Wired/Wireless network" #1, 09:05pm Jan 8, 2005 CDT
    Notes:
    1. You MUST re-enable DHCP on your router. If you don't, the Airport Express won't be able to get an IP address. If your Airport Express doesn't get an IP address, your Mac won't be able to communicate with it.
    2. When configuring via an ethernet connection, you must use the Airport Admin Utility (David's article tells you this as well). The Airport Setup Assistant can only be used if you are going to do the configuration wirelessly from an Airport card equipped Mac.

  • Exchange 2013 EAC Service Pack 1 New mailbox cannot see all OUs when selecting Browse with "Exchange Organization Management " permissions

    Single forest 2 Domains. When I go to create a new mailbox in the Exchange Admin  Centre and "Browse" the Organizational Unit. I can only see a few OU in the Parent Domain and most in the Child Domain. I have tried "expand All" and
    cannot see anywhere in the EAC to set a "Recipient Scope". The account I am using has "Exchange Organization Management " rights and is a Domain Admin as well.
    The Exchange servers are members of the Root Domain.
    In the "Select an Organizational Unit" menu there is a message "There are more results available than are currently displayed". I have tried searching as well and cannot find OUs that I should be able to.
    All the servers have had Exchange 2013 Service pack 1 installed.
    Any suggestions?
    Regards,
    John

    Changing that setting resulted in the ECP site being inaccessible. So I changed it back
    I have copied the user accounts to test with.
    Originals:
    User1: can see OU's when making a new user through the ECP (access: domain, exchange recipient admin)
    User2: cannot. (Enterprise, domain, exchange, schema admin)
    Test users:
    test user1: copied from user 1, cannot see any OU's when creating a new user.
    test user2: copied from user 2, can see all OU's when creating a new user.

  • Cannot detect CFP 2000 on network

    Hi
    I am trying to detect a CFP 2000 device in the measurement and automation explorer software, the device and PC are on the same subnet and no firewalls are present yet there is nothing to select under remote systems.
    When I switch the device on the status LED is continuous, then after 5-10 seconds flashes continuously. I have tried the reset IP switch then resetting but this does not work either.
    I am new to using NI equipment but have been informed the device was working fine 4 weeks ago, and no changes have taken place since.  Any suggestions to get it working again?
    Thanks for the help
    Ashley 

    Thank you for the quick reply.  The status LED is continuously flashing and appears to be in no sequence, looking at the manual (quote below) this seems like there is no IP address assigned although according to the network administrator this should happen automatically.
    "After about five seconds, the STATUS LED begins flashing. The cFP-20xx is ready to be configured, and you can install the FieldPoint
    software.  If you have already assigned an IP address to the cFP-20xx, the STATUS LED turns off, the I/O module READY LEDs come on, and the cFP-20xx
    is ready for use. The total boot time for a configured system is 30–45 seconds."
    Thanks
    Ashley

  • Transferred my iTunes to a new computer cannot find music files

    Recently I got a new PC laptop. I backed up my iTunes from my old laptop to an external hard drive and transferred them to the new computer. Although the song information appears in my iTunes window, when I try to play them I get a message that the file cannot be found and would I like help locating it.  Any suggestions on how to fix this?

    Something whet wrong with your migration process, that much is clear.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. It may be possible to simply slide the media folders into the location that iTunes expects them to be.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • Transferred purchases to new computer cannot move things to iPhone

    So I bought a Macbook Pro and am trying to transfer my iPhone to that computer as my primary computer now.  I have transferred the purchased and authorized the computer but I am still not able to add music to my phone or edit anything in my phone from iTunes.  Any help is appreciated.
    Kevin

    I get no error message, I can view everything on the phone it just will not let me delete things off of it or add to  it.  I can still hook it up to my old computer and manage it but my whole goal is to switch over completely to the new computer. 
    I have only copied portions of my music library to my new computer with the belief that I would need to redo it all at somepoint on the phone.
    I am not willing clear my phone to get this to work.

Maybe you are looking for

  • Problem with purchase order history

    Hi, i have the following problem I create a service purchase order for the quantity of 36000 and amount of 1350 (0.0375 per unit) Step 1: I entered a service entry sheet: quatity: 17800 Value: 667.5 The system create a 101 for the amount of 667.5. Th

  • Re: ALV Grid Application Tool Bar

    Dear Experts,              I am displaying a report in ALV grid. In the application tool bar. 'save layout' and 'change layout' icons were missing.if i want to put those icons on application tool bar where i have to change? if anybody knows pls. help

  • Where are my photos in iphoto  11

    Updated this morning to iPhoto '11. Only 31 photo are in library. What happened to all the rest?

  • Unable to suspend laptop - Asus G51J

    Hello, Today I installed Arch on my Asus G51J laptop, and am unable to suspend with pm-suspend or s2disk. The screen switches to a blank terminal with cursor blinking in the top-right and sits there indefinitely. I am using nVIDIA's binary drivers. F

  • Virtual Box Failover

    I am going to have sun ray server software connecting to XP VMs in Virtual Box. I am happy about setting up Sun Ray Fail-over How do I create the same thing for VirtualBox? i.e. if server 1 fails then VirtualBox on server 2 takes over