New Exchange Server 2013 in a Exchange 2007 Org, can't get cu's to install

Hi,
We have an Exchange Server 2007 in our organization. I installed an Exchange Server 2013 but could not get the CU3 to install, would throw exceptions. I tried CU2 and it got a lot further but failed to start a service near the end. Don't ask for specifics
as I got frustrated and blew this machine away and installed a fresh VM. I read that you can install the CU's as if they are a fresh installation. I tried this but it fails saying "the Exchange server is in an inconsistant stet....recover". There
IS no Exchange server yet!!
What am I doing wrong? I used the command line for CU3, like: setup /mode:install /roles:ca,mb,mt /IAccept blah blah blah. I didn't set powershell execution policy, not sure if that was it. Are there switches I am missing? I want to see if I can install
the Exchange CU3 right from the get-go.
HeLp!

Hi,
According to the error message, this issue may occur if the previous Exchange installation or un-install failed to complete. This situation leaves the Exchange server
object in Active Directory and prevents a new installation.
We can try:
1. Install ADSI Edit.
2. Launch ADSI Edit. To do this, click Start, click Run, type adsiedit.msc in the text box, and then click OK.
3. Locate the Exchange server object by going to the following location: CN=Configuration, DC= Domain Name, DC=com, CN=Services, CN=Microsoft Exchange, CN=<Organization
Name>, CN=Administrative Groups, CN= <Exchange Administrative Group>, CN=Servers, CN=<Server Name>.
4. Delete the server object.
5. Remove the Exchange server's machine account from Security groups Exchange Servers and Exchange Install Domain Servers.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Similar Messages

  • I update my exchange server 2013 cu6 with exchange 2007 and my exchange 2013 db shutdown every 25 minute and recover. You have any hotfix I can use for this solution.

    I update my exchange server 2013 cu6 with exchange 2007 and my exchange 2013 db shutdown every 25 minute and recover. You have any hotfix I can use for this solution.

    Hi,
    From your description, you have deployed Microsoft Exchange Server 2013 and Microsoft Exchange Server 2007 in a co-existence environment. After you upgrade to CU6, databases unexpectedly shut down. In your case, here is a kb for your reference.
    Exchange Server 2013 databases unexpectedly fail over in a co-existence environment with Exchange Server 2007
    http://support2.microsoft.com/kb/2997209
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Exchange Server 2013 setup / coexistance Exchange 2010

    So started setting up Exchange 2013 and ran into a random issue regarding the OAB. Resolved by deleting/recreating the OAB in Exchange 2010.
    My issue now is setup will not complete, just tells me an "Incomplete Installation Detected" starts to resume the installation.   Upon "next" I receive just a hanging screen of "Setup Progress" which goes no where.   
    [06/12/2014 20:05:19.0860] [0] **********************************************
    [06/12/2014 20:05:19.0876] [0] Starting Microsoft Exchange Server 2013 Setup
    [06/12/2014 20:05:19.0876] [0] **********************************************
    [06/12/2014 20:05:19.0876] [0] Local time zone: (UTC-05:00) Eastern Time (US & Canada).
    [06/12/2014 20:05:19.0876] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
    [06/12/2014 20:05:19.0876] [0] Setup version: 15.0.516.32.
    [06/12/2014 20:05:19.0876] [0] Logged on user: DOMAIN\Admin.
    [06/12/2014 20:05:19.0954] [0] Command Line Parameter Name='sourcedir', Value='F:\'.
    [06/12/2014 20:05:19.0954] [0] Command Line Parameter Name='mode', Value='Install'.
    [06/12/2014 20:05:19.0969] [0] RuntimeAssembly was started with the following command: '/sourcedir:F: /mode:Install'.
    [06/12/2014 20:05:20.0344] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole AdminToolsRole
    [06/12/2014 20:05:21.0391] [0] Setup is choosing the domain controller to use
    [06/12/2014 20:05:21.0595] [0] The MSExchangeADTopology has a persisted domain controller: DOMAIN CONTROLLER
    [06/12/2014 20:05:22.0485] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use DOMAIN CONTROLLER
    [06/12/2014 20:05:22.0485] [0] Setup is choosing a global catalog...
    [06/12/2014 20:05:22.0516] [0] Setup has chosen the global catalog server DOMAIN CONTROLLER.
    [06/12/2014 20:05:22.0516] [0] Setup will use the domain controller 'DOMAIN CONTROLLER'.
    [06/12/2014 20:05:22.0516] [0] Setup will use the global catalog 'DOMAIN CONTROLLER'.
    [06/12/2014 20:05:22.0516] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
    [06/12/2014 20:05:22.0532] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
    [06/12/2014 20:05:22.0579] [0] Setup will search for an Exchange Server object for the local machine with name 'LOCALHOST'.
    [06/12/2014 20:05:22.0751] [0] Exchange Server object found : 'CN=LOCALHOST,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
    [06/12/2014 20:05:22.0751] [0] The following roles have been unpacked: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole FrontendTransportRole AdminToolsRole CafeRole
    [06/12/2014 20:05:22.0751] [0] The following datacenter roles are unpacked:
    [06/12/2014 20:05:22.0751] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole AdminToolsRole
    [06/12/2014 20:05:22.0766] [0] The local server has some Exchange files installed.
    [06/12/2014 20:05:22.0798] [0] Server Name=LOCALHOST
    [06/12/2014 20:05:22.0829] [0] Setup will use the path 'F:\' for installing Exchange.
    [06/12/2014 20:05:22.0829] [0] Setup will discover the installed roles from server object 'CN=LOCALHOST,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
    [06/12/2014 20:05:22.0829] [0] 'BridgeheadRole' is installed on the server object.
    [06/12/2014 20:05:22.0829] [0] 'ClientAccessRole' is installed on the server object.
    [06/12/2014 20:05:22.0829] [0] 'MailboxRole' is installed on the server object.
    [06/12/2014 20:05:22.0829] [0] 'UnifiedMessagingRole' is installed on the server object.
    [06/12/2014 20:05:22.0845] [0] The installation mode is set to: 'Install'.
    [06/12/2014 20:05:44.0768] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
    [06/12/2014 20:05:44.0768] [0] Active Directory Initialization status : 'True'.
    [06/12/2014 20:05:44.0768] [0] Schema Update Required Status : 'False'.
    [06/12/2014 20:05:44.0768] [0] Organization Configuration Update Required Status : 'False'.
    [06/12/2014 20:05:44.0768] [0] Domain Configuration Update Required Status : 'False'.
    [06/12/2014 20:05:44.0768] [0] The locally installed version is 15.0.516.32.
    [06/12/2014 20:05:44.0768] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server\V15'.
    [06/12/2014 20:05:44.0830] [0] Applying default role selection state
    [06/12/2014 20:05:44.0877] [0] Setup is determining what organization-level operations to perform.
    [06/12/2014 20:05:44.0877] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN-NAME.
    [06/12/2014 20:05:44.0877] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V15\'.
    [06/12/2014 20:05:44.0893] [0] InstallModeDataHandler has 0 DataHandlers
    [06/12/2014 20:05:44.0893] [0] RootDataHandler has 1 DataHandlers
    [06/12/2014 20:05:45.0737] [0] Finished loading screen IncompleteInstallationDetectedPage.
    [06/12/2014 20:05:48.0518] [0] Setup is determining what organization-level operations to perform.
    [06/12/2014 20:05:48.0518] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN-NAME.
    [06/12/2014 20:05:48.0518] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V15\'.
    [06/12/2014 20:05:48.0518] [0] InstallModeDataHandler has 0 DataHandlers
    [06/12/2014 20:05:48.0518] [0] RootDataHandler has 1 DataHandlers
    [06/12/2014 20:05:48.0737] [0] Finished loading screen SetupProgressPage.

    Hi,
    Let's try the following resolutions:
    1. Check if the discovery SearchMailbox is present on Exchange 2010 when you run the Exchange 2013 Install.
    2. Reinstall your Exchange 2013 server:
    Open ADSIEDIT, CN=Configuration, DC=your domain ->CN=Services ->CN=Microsoft Exchange ->CN=First Organization ->CN=Administrative Groups ->Cn=Exchange Administrative Group ->CN=Servers ->CN=Server name
    After remove the exchange server, please reinstall your exchange server to test the result.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Exchange Server 2013 Management Pack in SCOM 2012, can not update healthset status automatically

    Hi, all
    I have Exchange Server 2013 and SCOM 2012 installed. I have imported Exchange Server 2013 Management Pack to SCOM 2012. Now I have a question that when there is a service not healthy, I can find the red alert in my alert view with the Exchange 2013 server,
    but after the service is healthy automatically, the red alert is still there. I can only make it become green healthy status after reseting the healthset status in the healthset explorer.
    Does anyone know how to make the server become green healthy status automatically after the monitor is healthy?
    Thank you.
    Nile

    Hi,
    How many Exchange Servers do you have? Does this issue only occur on one Exchange Server?
    Please check the application log on the problematic Exchange server and see whether there are any related event error.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Exchange server 2013 ECP, OWA, Exchange Management Shell, Outlook access and a few more problems.

    Good Morning,
    I really need some help please.
    Our Server 2012 std. with Exchange 2013 std. installation was running like a dream. The tech responsible for our installation left the company to work in the UK and reported to us that there were minor issues with the installation that
    needed attention.
    on investigation we have found issues in that we cannot access ECP or OWA and in fact Internet explorer most of the time. on further investigation we found management shell for exchange gives errors on start up and new users and outlook cannot
    be added to the domain.
    On contacting the tech via phone he said he had issues with Certificates but could not help any further.
    I have googled the problems and read much in TechNet and believe that in order not to make things worse than they are to approach those that know more than I do at present. I am not sure where to start right now.
    Where do I start?????
    ps. There does not seem to be any backups that we can fall back on.
    regards  Tom

    Hi Winnie,
    Please check me on this. Authentication seems to be incorrectly configured.
    Attached below is the output from the commands you requested me to run.
    ecp
    Identity                      : NORTH2012-SERV\ecp (Exchange Back End)
    InternalAuthenticationMethods : {Ntlm, WindowsIntegrated}
    BasicAuthentication           : False
    WindowsAuthentication         : True
    DigestAuthentication          : False
    FormsAuthentication           : False
    LiveIdAuthentication          : False
    AdfsAuthentication            : False
    OAuthAuthentication           : False
    ExternalAuthenticationMethods : {Fba}
    Identity                      : NORTH2012-SERV\ecp (Default Web Site)
    InternalAuthenticationMethods : {Basic, Fba}
    BasicAuthentication           : True
    WindowsAuthentication         : False
    DigestAuthentication          : False
    FormsAuthentication           : True
    LiveIdAuthentication          : False
    AdfsAuthentication            : False
    OAuthAuthentication           : False
    ExternalAuthenticationMethods : {Fba}
    OWA
    Identity                      : NORTH2012-SERV\owa (Exchange Back End)
    InternalAuthenticationMethods : {Ntlm, WindowsIntegrated}
    BasicAuthentication           : False
    WindowsAuthentication         : True
    DigestAuthentication          : False
    FormsAuthentication           : False
    LiveIdAuthentication          : False
    AdfsAuthentication            : False
    OAuthAuthentication           : False
    ExternalAuthenticationMethods : {Fba}
    Identity                      : NORTH2012-SERV\owa (Default Web Site)
    InternalAuthenticationMethods : {Basic, Fba}
    BasicAuthentication           : True
    WindowsAuthentication         : False
    DigestAuthentication          : False
    FormsAuthentication           : True
    LiveIdAuthentication          : False
    AdfsAuthentication            : False
    OAuthAuthentication           : False
    ExternalAuthenticationMethods : {Fba}
    regards
    Tom

  • New Deployment of Exchange Server 2013.

    Hello All,
    Good Day !!
    We are planning to install Exchange 2013  Mailbox and Client Access on single server ( Windows Server 2012 Standard).
    Currently Active Directory roles runs on windows server 2008R2 Sp1.
    Its a new deployment for exchange as currently we are using Godaddy email server ( Can we migrate all our emails from Go daddy to our exchange Server).
    Also confirm  current active directory will support the installation and deployment of Exchange Server 2013.
    How much HDD, RAM and  CPU cores are required to support exchange Server Mailbox and Client Access roles( Users are 30 ).
    How many Static IP's and SSl certificates are required for exchange.
    Atlast as i said its new deployment please suggest if anything else is missing from my end. 

    Hello,
    I recommend using professional cheat-sheet articles for Exchange 2013 sizing:
    http://www.msexchange.org/articles-tutorials/exchange-server-2013/planning-architecture/exchange-2013-sizing-cheat-sheet-part1.html
    http://www.msexchange.org/articles-tutorials/exchange-server-2013/planning-architecture/exchange-2013-sizing-cheat-sheet-part2.html
    The server's requirements depend on many factors ie. number of emails received/sent, mailboxes sizes etc.
    In addition your AD environment's level supports Exchange 2013 deployment. You will need only prepare your schema and forest for Exchange installation. You will need also at least one public IP address and SSL certificate for that server.
    Hope it helps,
    Adam
    CodeTwo: Software solutions for Exchange and Office 365
    If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster.

  • Exchange Server 2013 Client Mail are Return.Error is [0x80040305-0x0004de-0x00054a]

    Hi,
    We are using Exchange Server 2013.we have Outlook 2007 SP3 and 2010 SP2 client .Some clients inform mails are return.
    Return massage
    "This message could not be sent. Try sending the message again later, or contact your network administrator. Your server administrator has limited the number of items you can open simultaneously.
    Try closing messages you have opened or removing attachments and images from unsent messages you are composing. Error is [0x80040305-0x0004de-0x00054a]"
    Thanks,
    Gayan

    1) Disable TCPChimney and RSS on CAS and Mailbox Servers by running below commands
    netsh int tcp set global chimney=disabled
    netsh int tcp set global rss=disabled
    2) Disable unwanted Add-Ins in outlook that may open many sessions
    3) If above steps doesnt resolve, you can delete existing outlook profile and create new Outlook online profile

  • Exchange server 2013 Installation issue

    Dear Experts,
    Thanks in advance...
    I am not able to Install Exchange server 2013. I have tried my best to Install but not success. Please find my system configuration.
    Dell Laptop Intel I5 1.7 GHZ
    RAM -8GB
    Vmware workstation 9.
    Steps I followed
    Created a VM inside Vmware and Installed windows 2012 Std. Edition
    Memory assigned to VM is 1 GB
    All prerequisites completed and tried to Install Exchange server 2013 SP1
    During installation it asked me to select the  role to Install and I selected Mailbox server role and CAS
    Exchange setup process started at 3 P.M till 9 P.M setup was not finished finally setup process halt and I got the error  setup could not completed .
    Please find the logs for your reference.............
    04/13/2015 08:41:02.0303] [0] **********************************************
    [04/13/2015 08:41:02.0303] [0] Starting Microsoft Exchange Server 2013 Service Pack 1 Setup
    [04/13/2015 08:41:02.0303] [0] **********************************************
    [04/13/2015 08:41:02.0303] [0] Local time zone: (UTC+05:30) Chennai, Kolkata, Mumbai, New Delhi.
    [04/13/2015 08:41:02.0303] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
    [04/13/2015 08:41:02.0328] [0] Setup version: 15.0.847.32.
    [04/13/2015 08:41:02.0328] [0] Logged on user: WIN-4D2C2JMF5R1\Administrator.
    [04/13/2015 08:41:02.0336] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [04/13/2015 08:41:02.0368] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [04/13/2015 08:41:02.0600] [0] Command Line Parameter Name='sourcedir', Value='C:\Softwares\Exch-13'.
    [04/13/2015 08:41:02.0615] [0] Command Line Parameter Name='mode', Value='Install'.
    [04/13/2015 08:41:02.0632] [0] RuntimeAssembly was started with the following command: '/sourcedir:C:\Softwares\Exch-13 /mode:Install'.
    [04/13/2015 08:41:02.0632] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [04/13/2015 08:41:05.0504] [0] Finished loading screen CheckForUpdatesPage.
    [04/13/2015 08:41:13.0567] [0] Starting file's copying...
    [04/13/2015 08:41:13.0599] [0] Setup copy files from 'C:\Softwares\Exch-13\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
    [04/13/2015 08:41:13.0794] [0] Finished loading screen CopyFilesPage.
    [04/13/2015 08:41:15.0033] [0] Disk space required: 1826493368 bytes.
    [04/13/2015 08:41:15.0033] [0] Disk space available: 46620041216 bytes.
    [04/13/2015 08:42:55.0484] [0] Finished loading screen InitializingSetupPage.
    [04/13/2015 08:42:55.0484] [0] File's copying finished.
    [04/13/2015 08:43:13.0922] [0] Setup is choosing the domain controller to use
    [04/13/2015 08:43:28.0885] [0] Setup is choosing a local domain controller...
    [04/13/2015 08:43:32.0221] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Active Directory server 
    is not available. Error message: Active directory response: The LDAP server is unavailable. 
    See the Exchange setup log for more information on this error.
    [04/13/2015 08:43:32.0335] [0] [ERROR] Active Directory server 
    is not available. Error message: Active directory response: The LDAP server is unavailable.
    [04/13/2015 08:43:32.0366] [0] [ERROR] The LDAP server is unavailable.
    [04/13/2015 08:43:32.0366] [0] Setup will use the domain controller ''.
    [04/13/2015 08:43:32.0366] [0] Setup will use the global catalog ''.
    [04/13/2015 08:43:32.0596] [0] No Exchange configuration container was found for the organization. Message: 'Active Directory server 
    is not available. Error message: Active directory response: The LDAP server is unavailable.'.
    [04/13/2015 08:43:32.0707] [0] The following roles have been unpacked:
    [04/13/2015 08:43:32.0721] [0] The following datacenter roles are unpacked:
    [04/13/2015 08:43:32.0739] [0] The following roles are installed:
    [04/13/2015 08:43:32.0739] [0] The local server does not have any Exchange files installed.
    [04/13/2015 08:43:32.0834] [0] Server Name=WIN-4D2C2JMF5R1
    [04/13/2015 08:43:33.0032] [0] Setup will use the path 'C:\Softwares\Exch-13' for installing Exchange.
    [04/13/2015 08:43:33.0084] [0] The installation mode is set to: 'Install'.
    [04/13/2015 08:43:51.0460] [0] Exchange organization name is required for this mode.
    [04/13/2015 08:43:51.0460] [0] Active Directory Initialization status : 'False'.
    [04/13/2015 08:43:51.0472] [0] Schema Update Required Status : 'False'.
    [04/13/2015 08:43:51.0472] [0] Organization Configuration Update Required Status : 'False'.
    [04/13/2015 08:43:51.0472] [0] Domain Configuration Update Required Status : 'False'.
    [04/13/2015 08:43:51.0536] [0] Applying default role selection state
    [04/13/2015 08:43:51.0565] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:43:51.0565] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:43:51.0565] [0] InstallModeDataHandler has 0 DataHandlers
    [04/13/2015 08:43:51.0565] [0] RootDataHandler has 1 DataHandlers
    [04/13/2015 08:43:52.0848] [0] CurrentResult launcherbase.maincore:90: 0
    [04/13/2015 08:43:53.0067] [0] Finished loading screen WelcomePage.
    [04/13/2015 08:44:06.0654] [0] Finished loading screen EULAPage.
    [04/13/2015 08:44:10.0679] [0] Finished loading screen RecommendedSettingsPage.
    [04/13/2015 08:44:13.0814] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:13.0814] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:13.0814] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:13.0844] [0] InstallModeDataHandler has 8 DataHandlers
    [04/13/2015 08:44:14.0048] [0] Finished loading screen RoleSelectionPage.
    [04/13/2015 08:44:18.0619] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:18.0619] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:18.0619] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 9 DataHandlers
    [04/13/2015 08:44:18.0632] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:18.0632] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:18.0632] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 10 DataHandlers
    [04/13/2015 08:44:18.0632] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:18.0632] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:18.0632] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 11 DataHandlers
    [04/13/2015 08:44:18.0648] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:18.0648] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:18.0648] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:18.0648] [0] InstallModeDataHandler has 12 DataHandlers
    [04/13/2015 08:44:22.0644] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:22.0644] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:22.0644] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:22.0644] [0] InstallModeDataHandler has 13 DataHandlers
    [04/13/2015 08:44:22.0644] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:22.0644] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:22.0644] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:22.0656] [0] InstallModeDataHandler has 14 DataHandlers
    [04/13/2015 08:46:00.0423] [0] Finished loading screen InstallationSpaceAndLocationPage.
    [04/13/2015 08:46:28.0427] [0] Finished loading screen ExchangeOrganizationPage.
    [04/13/2015 08:46:30.0221] [0] Finished loading screen
    Regards
    Biswajeet

    Hi,
    Please find the DC Health check report.
    Microsoft Windows [Version 6.2.9200]
    (c) 2012 Microsoft Corporation. All rights reserved.
    C:\Users\Administrator>dcdiag
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = EX-13
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\EX-13
          Starting test: Connectivity
             ......................... EX-13 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\EX-13
          Starting test: Advertising
             ......................... EX-13 passed test Advertising
          Starting test: FrsEvent
             ......................... EX-13 passed test FrsEvent
          Starting test: DFSREvent
             ......................... EX-13 passed test DFSREvent
          Starting test: SysVolCheck
             ......................... EX-13 passed test SysVolCheck
          Starting test: KccEvent
             ......................... EX-13 passed test KccEvent
          Starting test: KnowsOfRoleHolders
             ......................... EX-13 passed test KnowsOfRoleHolders
          Starting test: MachineAccount
             ......................... EX-13 passed test MachineAccount
          Starting test: NCSecDesc
             ......................... EX-13 passed test NCSecDesc
          Starting test: NetLogons
             ......................... EX-13 passed test NetLogons
          Starting test: ObjectsReplicated
             ......................... EX-13 passed test ObjectsReplicated
          Starting test: Replications
             ......................... EX-13 passed test Replications
          Starting test: RidManager
             ......................... EX-13 passed test RidManager
          Starting test: Services
             ......................... EX-13 passed test Services
          Starting test: SystemLog
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/14/2015   18:01:37
                Event String:
                DCOM was unable to communicate with the computer fec0:0:0:ffff::1 us
    ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
    m32\dcdiag.exe).
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/14/2015   18:01:49
                Event String:
                DCOM was unable to communicate with the computer fec0:0:0:ffff::2 us
    ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
    m32\dcdiag.exe).
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/14/2015   18:02:02
                Event String:
                DCOM was unable to communicate with the computer fec0:0:0:ffff::3 us
    ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
    m32\dcdiag.exe).
             ......................... EX-13 failed test SystemLog
          Starting test: VerifyReferences
             ......................... EX-13 passed test VerifyReferences
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test
             CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test
             CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : NETMAGIC
          Starting test: CheckSDRefDom
             ......................... NETMAGIC passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... NETMAGIC passed test CrossRefValidation
       Running enterprise tests on : NETMAGIC.IN
          Starting test: LocatorCheck
             ......................... NETMAGIC.IN passed test LocatorCheck
          Starting test: Intersite
             ......................... NETMAGIC.IN passed test Intersite
    Regards
    Biswajeet

  • Error occurred at the 7 of 15 step of Microsoft Exchange Server 2013

    Hi all to every techies ....
    I'm a new to exchange server 2013 , I tried to install exchange server 2013 on windows server 2012 but couldn't get the success , It stops either 7 or 8 step of 15 , I tried to google it out but can not getting any progress , I tried to remove it , I deleted
    by using ADSI Edit then I removed from the IIS then I delete the Microsoft folder from the Installed directory , and also I removed it from the registry editor as well , Thing thing is pulling my hair out my scalp , Any related help highly appreciated , 
    The registry key (pickup / transport) doesn't exist in specified registry location , (i.e HKEYLM_SOFTWARE_MICROSOFT_EXCHANGESERVER 
    Thank you all
    Neil Patric 

    Hi,
    To understand more about the issue, I’d like to confirm the detail error when the installation failed.
    As far as I know, deployment of an Exchange Server 2013 server goes through three main stages.
    1. Preparing Active Directory (if you are installing Exchange Server 2013 for the first time)
    2. Installing the Exchange Server 2013 pre-requisites on the server
    3. Running Exchange Server 2013 setup
    For more information, you can refer to the following article:
    http://exchangeserverpro.com/how-to-install-exchange-server-2013/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best regards,
    Angela Shi
    TechNet Community Support

  • Public Folder in exchange server 2013

    We are using an legacy application developed in Classic ASP. In this application we are rendering the message items in the public folder on the exchange server 2003.
    Now we are going to migrate our exchange server 2003  to exchange server 2013.
    Do exchange server 2013 have public folder? Is this migration have impact on the public folders usage.
    Please let me know for any clarifications.

    There will be no co-existence support for Exchange Server 2003. In your scenario, you will have to migrate twice, once from Exchange 2003 to Exchange 2007 or 2010, then again to Exchange 2013 or another option you have to proceed that by using any third-party
    migration tool to accomplish this task in one go. When you preparing to migrate mailbox, you can have a look at
    exchange server deployment assistant to see the current recommended steps for your configuration. A good resource for swing migration direct from exchange 2003 to 2013 can be explored at
    here.
    In the same way, You cannot migrate public folders directly from Exchange 2003. You will have to move all public folder databases and replicas to Exchange 2007 SP3 RU10 or later. No public folder replicas can remain on Exchange 2003. 
    I would like to refer on couple of links mentioned below. It will help you better to clarify the scenario further :
    Understanding the public folder architecture
    Public folder migration

  • Exchange server 2013 Standard will support for Exchange cal Enterprise???

    Hi,
    We have Purchased Exchange Server 2013 STD Edition and Exchange server CALs are Enterprise.
    is it compatable for this...
    can u give reply for this...

    Hello Sashys,
    Here’s full explanation:
    http://office.microsoft.com/en-us/exchange/microsoft-exchange-server-licensing-licensing-overview-FX103746915.aspx. You should have at least standard CAL for each of your users. Enterprise CAL's are an add-on to the standard license, that provides additional
    features. Moreover both types of CAL's can be used with either Exchange server 2013 Standard or Exchange server Enterprise.
    Hope it helps,
    Adam
    www.codetwo.com
    If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others
    find the answer faster.

  • Using Outlook Web App Web Parts in Exchange Server 2013 - OWA ? Possible?

    Using Outlook Web App Web Parts in Exchange Server 2013 - OWA ? Possible?
    We recently upgraded from Exchange 2010 to Exchange 2013.
    The links that used OWA Web parts have completely stopped working and generate the " :( something went wrong contact your help desk" screen for domain Authenticated users other than myself. The links accessed content of a Shared Account of which
    I am an owner and can set the necessary permissions using the Outlook 2013 client.
    Using the example from the link provided below we were able to provide calendar access to all authenticated users in our area. The link for calendar still works for me but for noone else. Additionally, all navigation menus are missing when I use this link.
    <server>/owa/<SMTP address>/?cmd=contents&module=calendar&view=weekly name
    Another crafted link provided web access to our group's task list. This has completely stopped working for anyone including myself. However, when I use "open another mailbox" I am able to navigate to the needed pages.
    <server name>/owa/<SMTP address>/?cmd=contents&module=tasks
    These links were crafted using advice provided from this provided link.
    technet.microsoft.com/en-us/library/bb232199(v=exchg.141).aspx
    Is it still possible to use Outlook Web App Web Parts in Exchange Server 2013 - OWA?
    Or
    Is this a misconfiguration of some sort?
    My IT support has given up and closed out the ticket stating that maybe Microsoft will fix this someday...

    Hello,
    At present, there is no official article to verify whether we can use Outlook Web App Web Parts in Exchange Server 2013. In exchange online, the Outlook Web App Parts is supported.
    Cara Chen
    TechNet Community Support
    Hi, you said this feature is supported in Exchange Online (I understand you're referring to Office 365). Can you please point me to some documentation as I was trying to use it with my E3 account and it doesn't seem to work?
    What I'm trying to acomplish is something similar to our old URL (Exchange 2010) in Office 365:
    https://ourserver.mydomain.com/owa/[email protected]/?cmd=contents&module=calendar&view=monthly
    The best I can do in Office 365 is this:
    https://outlook.com/owa/mydomain.com/[email protected]/#path=/calendar
    But it's clearly not the same and Office 365 ignores all the information I add to the URL. I would greatly appreciate something in the line of the document referred by 'MarquetteENG' (technet.microsoft.com/en-us/library/bb232199(v=exchg.141).aspx)
    Thanks.
    Paulo.
    Paulo Dias - IT Pro Evangelist

  • Exchange Server 2013 SP1 - Readiness Check Failing - Detected Non-existent Exchange 2007 Servers

    For development purposes, I needed to install Exchange Server 2013 in our environment.  Our current environment includes a couple Domain Controllers, a Sharepoint Server, and a SQL Server.  So, it's got a very simple topology.  The one thing
    our environment does NOT have are current Exchange servers.
    During the "Prerequisite Analysis" phase of the install it complained that two servers, that I can find nowhere in our active directory domain, are running Exchange 2007.  Obviously, this presents some unique problems.  Perhaps as a test
    many years ago, someone installed Exchange 2007 to "play" with, but we've never run Exchange for any length of time.  
    So, this is quite the conundrum, given the above does anyone have any suggestions as to a potential solution?  Ideally, I'd like to be able to "lift the covers" and cleanup the references to the non-existent servers somehow, but ANY suggestions
    for fixes are MUCH appreciated.
    Cheers,
    Nate

    Here is the thing I would do (Only if I am not going to have any exchange 2007 ever in the environment).
    On any of windows server 2008 download
    Exchange 2010 SP3
    Extract the file and run the below command:
    Setup.com /ps
    This will make Exchange 2013 install. Also Deleting Exchange Administrator Group wouldn't help as Setup will look for the information about schema into AD.
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Outlook 2007 compatiable with Exchange server 2013

    Hi
    I would like to ask, i have outlook 2007 and Exchange server 2013, when i configure outlook 2007, i fail to configuration, Is it outlook 2007 compaitable to exchange server 2013.

    Yes, Outlook 2007 is supported. Make sure that the Outlook 2007 clients are fully updated. As a minimum, you need
    SP3 for office 2007,
    kb2687404 and
    kb2768023.
    Again, the best approach is to have all office 2007 updates installed.
    Step by Step Screencasts and Video Tutorials

  • Exchange Server 2013: Installation fails

    Migrating SBS 2008 to Windows Server 2012 R2 (no virtualization) and Exchange Server 2013 SP1
    (1) ADprep on SBS 2008 went fine
    (2) Installed necessary feature for Exchange (website “Part 1: Step-by-Step Exchange 2007 to 2013 Migration”)
    A) the first time I installed Exchange 2013, the setup succeeded, however there were several ecp/WinRM errors.
    B) restored Windows Server 2012 R2 to the state (2). Removed from AD (ADSI Edit)
    … CN=Services; CN=Exchange; CN=First Organization; CN=Exchange Administrator Group; CN=Servers 
    delete new Win 2012 server
    Run Exchange setup again:
    The following error was generated when "$error.Clear();
    if ($RoleStartTransportService)
    start-SetupService -ServiceName MSExchangeTransport -MaxWaitTimeForRunningState 0:0:40
            " was run: "Service 'MSExchangeTransport' failed to reach status 'Running' on this server.".
    Checked:
    - IPv6 is enabled, but was setup correctly after installing ADDS role)
    - Administrators (Group) is a member of the Exch. Trusted Subsystem
    Probably there is an AD problem, after the restoration (B) (bare metal) of the Win 2012 server.
    Please help!
    Fulco

    Hi
    the error states that the MSExchangeTransport service failed to start. Can you manually try starting the service and then run the setup again?
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Maybe you are looking for

  • Library filter presets not working correctly across catalogs

    I am having a trouble with Library Filter Presets that are shared between catalogs.  I like to set up presets that filter on specific keywords.  For example, I have a preset called "Label - Project 365" which turns on the keyword metadata filter and

  • Crashing with Particle Playground: Color Picker.

    Running Mac OS X 10.6.5, MacBook Pro. Well, I make a Solid, I put Particle Playground, and then, I want to change a certain color of that effect, but as soon as I move my cursor on the Color Picker, After Effects crashes. I downloaded After Effects,

  • Shared Variable Help

    Hey, I need some help with shared variables. Here is what I'm trying to do. I run a vi on the computer that uses a camera to track certain objects. I would like this program to send the position of the object to another vi that is running at the same

  • TextField ADS and not using plain text

    Hey Im using interactive forms and I have a problem using linebreaks. The InputField can only accept plain text. If I switch this option off, I get this error message "Node cannot be inserted where requested" when im pressing the Submit to SAP button

  • Script photoshop | rename for color/image

    Hello to all, My English is terrible, but I hope you manage to understand. I need a script to photoshop you can run at the end of an action, which indivudi the main color of an image, and based on what save the image with a specific name. example: Lo