New GP Task Items do not appear in UWL after clear item cache of GP System

HI, SDN Expert.
After I made some minor change in the GP configuration xml (changing the "createdate" format from "date" to "datetime"), I went to the Cache Administration Page to clear the item cache of my GPSystem. I went to register the item types for all system in the UWL Configuration Page.
After clearing the cache and register the item types, I started initiate some GP tasks, but now all the GP tasks are not appearing in the UWL any more.
I remembered last time the same thing has happened, but the GP tasks started appearing only after a few hours.
Now, it has been two hours wait, I still don't see my GP tasks re-appear.
I wonder any of you know whether this situation is normal? What is the root cause for this situation? And how do I fix this?
Thanks for advise,
KC

Issue resolved.

Similar Messages

  • GP Work Items are not coming in UWL after refresh the cache.

    Hi All,
    We are facing strange problem. We have cleared the UWL Cache for the GP connector and after that workitems releated to GP are not showing up into the UWL.
    Any Idea.??
    Thanks
    Dheerendra

    Hi Dheerendra,
    Are you using Federation by any chance? I mean, your GP runs on one server and you are using the UWL on the other server via federation? If yes then please check if the federation has been configured correctly and is working fine.
    The other thing you can check is that the GPConnector is deactivated by mistake. If yes, then activate it.
    Another check can be done in the System Configuration of the System Alias you are using for the GPConnector. Check whther it is pointing the correct sustem configuration. check whether the connection tests to that system are successful.
    Also check whether the GPWorkItemProvider Web Service is working.
    Regards,
    Ajay

  • "Hyperion" menu item does not appear in Excel after SmartView Installation

    Hi to all! When I first installed SmartView, everything was ok - "Hyperion" menu item appeared in Excel and I successfully established connection to Planning and worked with data in Excel. Then, once upon a time I happened to select all data through Ctrl+A in the data form open in Excel and tried to copy it to another worksheet in the same workbook, Excel threw out a message about some serious error and informed me that the Hyperion Add-on would be removed. So it was removed in fact. When I was reinstalling Smart-View, all the installation went smoothly but the "Hyperion" menu item did not appear in Excel again. I tried to reinstall both Excel and SmartView and rebooted the system several times but the Hyperion menu item still does not appear in Excel. Can anyone hint me on how to solve this? Thanks a lot in advance!

    Hi, John! Thanks a lot! Your link led me to the thread in which the last post had the link Re: Smart View errors in Excel?! containing the "low-tech" 's instructions. It was these instructions that pulled me from underwater! Thank you so much and to that guy too! :)

  • Cleared items not appearing When  we click cleared items in T.code FBL3N

    Hi all,
            We have prepared one ABAP program, to clear all open items for a particular GL account, company code, period, fiscalyear,
             When we run this program, the open items are clearing but not appearing in cleared items,
             Can any one help me out on this........
    Appreciated with points...
    Regards,
    sai........

    Hi,
    Check the cleared items in table BSIS, if the items are clearing then those items should appear in this table. Otherwise i doubt your program is not working?
    Debug the program and check from which tables its selecting the data  ie it should select the GL open items from table BSIS.
    Raj

  • Sales Order Items does not appear in MD04 after BAPI_SALESORDER_CHANGE

    Hi Gurus,
    I have this scenario.
    1)Create sales order with 3 items.
    2)Check in MD04. All items are there.
    3)Assign reason for rejection for all the items.
    4)Use BAPI_SALESORDER_CHANGE to remove the reason for rejection.
    5)Only the first item can be shown in MD04.
    Do you have any idea how can #5 happen?
    Thanks and Best regards,
    Andre

    Thanks for the replies.
    @ A.L.V Ramana,
    Yes they all have confirmed qty. The one thing I noticed is that only the first item is being saved to table VBBE from which MD04 is getting sa sales documents. Is there any condition that must be met in order for this table to be filled except that if the item has reason for rejection or does not have confirmed qty?
    @ Anirudh.vb
    Thanks for the suggestion but the users wants a real time update on MD04.
    Best regards,
    Andre

  • GP Task not appearing in UWL

    Hi, We have GP WD java application which is running CE 7.31 sp05. Some of the GP task is not appearing in UWL . What might be case,please suggest.

    Hi Jigar,
    As Mentioned in the previous posts re register the system and also clear the cache, once done check whether the task items are there in the UWL config or not.
    If this doesn't solve update the problem after you do that.
    Cheers-
    Pramod

  • Line items are not appearing while processing F-44

    With transaction F-44, to clear vendor account, the system displays only one open item, whereas there are 2 open items on the line item report (FBL1N). Further there are two line items in BSIK.
    Please help

    Hello,
    There are two line items in the Vendor account, the details are as follows:
    Date             Amount                  PK                 DR/Cr
    31.03.2008   12,050.00                38                      Cr
    05.06.2008   12,050.00                28                      Dr
    of above while processing F-44, we are able to see only debit item dated 05.06.2008.other line item is not appearing. When tried by putting document number, it says "NO OPEN ITEMS FOUND"

  • TS4425 when trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

    When trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

    Welcome to the Apple Community.
    The following article(s) may help you.
    Photo Stream ToU's

  • When I change a password, sometimes I get a pop-up asking if I want to save the new password - sometimes it doesn't appear. How can I save the new password if popup does not appear?

    When I change a password, sometimes I get a pop-up asking if I want to save the new password - sometimes it doesn't appear.
    How can I save the new password if popup does not appear?

    The website may be using autocomplete=off to prevent Firefox from saving the name and password.
    You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
    *http://kb.mozillazine.org/User_name_and_password_not_remembered
    *Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

  • Item pictures not appear does not appear when I sync

    Item pictures not appear does not appear when I sync

    after looking at a few other posts, i tried the uncheck the sync box, did a sync, rechecked the box, and synced again.  the music is now downloading into my phone.  if anyone else has this problem try this first.

  • Custom item does not appear on Hotsync Menu

    I have a Sprint Treo 700p.  My work email was converted to Outlook from GroupWise.  I am able to sync successfully, but received a message about changing profiles and conduits.  I tried to do this by clicking the Hotsync icon in system tray.  The menu that appeared only had three items (Settings, Install, Exit).  The CUSTOM item does not appear.  I am using Hotsync Manager 7.0.2.  How can I get back the CUSTOM menu item?
    Thanks in Advance,
    Corey
    Post relates to: Treo 700p (Sprint)

    Those Hotsync options are what display on Palm Desktop 6.2.2, not prior versions 4.x.
    To get to your Hotsync settings, click the Hotsync icon, and select Settings.  Then click Applications. Select the conduit you wish to change, and click Configure.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • Why PO Item does not appear when return GR?

    Dear Gurus,
    The scenerio is,
    A standard PO with 30 items.
    The PO is released and complete received by MB01 103, 105.
    When return GR by MIGO GR 122, the PO items do not appear except one item. If use MB01, the same.
    Why? Pls advice. Thanks.
    Regards,
    David

    Just found a good OSS note: Note 886735 - MIGO: Unclear why GR is not possible for the purchase order
    It has a report attached, that helps to analyse the reason.
    Carry out the following checks using the report:
    1.  Check the document category
    Information: The document category 'F' is possible for purchase orders and the document category 'L' is possible for scheduling agreements.
    2.  Check that the purchase order/scheduling agreement is not deleted.
    3.  Check that the purchase order/scheduling agreement is not blocked.
    4.  Check whether the purchase order/scheduling agreement is released.
    5.  Check that the purchase order is not held.
    6.  Check whether the goods receipt is already posted.
    7.  Is there a purchase order for external service?
    8.  Is there a blanket purchase order?
    9.  Is there a text item?
    10. Is there a statistical item?
    11. Is the goods receipt indicator set in the purchase order/scheduling agreement?
    12. Check whether the confirmation control is active and whether a confirmation is still not available.
    13. Is there a valid scheduling agreement delivery schedule line?

  • I changed the password on my computer for my gmail account, and now new gmail calendar information is not appearing.

    I changed the password on my computer for my gmail account, and now new gmail calendar information is not appearing on my iTouch.

    Go to Settings>Mail>GMail account and update the password for the account

  • What is the source of this Crawl Error `The item could not be indexed successfully because the item failed in the indexing subsystem`

    Once in a while my full-crawl fails and stops working properly. The crawllogs show this error for all items crawled.
    The item could not be indexed successfully because the item failed in the indexing subsystem. ( The item could not be indexed successfully because the item failed in the indexing subsystem.; Caught exception when preparing generation GID[7570]: (Previous generation
    (last=GID[7569], curr=GID[7570]) is still active. Cannot open GID[7570]); Aborting insert of item in Link Database because it was not inserted to the Search Index.; ; SearchID = F201681E-AF1B-45D2-BFFD-6A2582D10C19 )
    The full crawls starts out ok, after a while (1.5 hours into the process, 50% of all the data) suddenly no more items can be added to the index.
    The index seems to be stuck. The index files on disk are no longer updated (Located in D:\Microsoft
    Office Servers\15.0\Data\Office Server\Applications\Search\Nodes\BAADC4\IndexComponent3\storage\data\SP4d91e6081ac3.3.I.0.0\ms\%default) The Index and Admin component start to report these error in the ULS logs:
    NodeRunnerIndex: Journal[SP4d91e6081ac3]:
    Rolling back GID[7570] to GID[7569] prepGen=GID[7569]
    NodeRunnerIndex: Remote
    service invocation: method=RollbackGeneration() Service = {  Implementation type=Microsoft.Ceres.SearchCore.ContentTargets.IndexRouter.IndexRouter  Component: SP4d91e6081ac3I.0.0.IndexRouter  Exposer Name: GenerationContentTarget} terminated
    with exception: System.InvalidOperationException: Illegal state transition in SP4d91e6081ac3I.0.0.FastServer.FSIndex: Rollback -> Rollback
    NodeRummerAdmin: RetryableInvocation[SP4d91e6081ac3]:
    Exception invoking index cell I.0.0. Retrying in 16 seconds: System.InvalidOperationException: Illegal state transition in SP4d91e6081ac3I.0.0.FastServer.FSIndex: Rollback -> Rollback
    Looks to me the index has troubles updating/merging 'generations'. But the exact working of the indexer is not documented (as far is I know). Let alone how to fix this.
    Other (maybe related) observations 
    Just before the errors start the NodeRunnerIndex starts a 'checkpoint': Journal[SP4d91e6081ac3]:
    Starting checkpoint because forceCheckpoint is true.which ends a few moments later with Journal[SP4d91e6081ac3]:
    All journal users have completed checkpoint Checkpoint[7560-7569].
    Also just before the errors start to appear a TimerJob starts: Name=Timer
    Job job-application-server-admin-service. This timerjobs does some strange things to the search topology: Synchronizing
    Search Topology for application 'Search Service Application' with active topology [...] and Activating
    components. Previous topology:   ---  New Topology: TopologyId: [...] followed by Starting
    to execute Index RedistributeData method.
    And right after these two evente the errors start to occur. (each row is a ULS log enrty)
    INFO : fsplugin: IndexComponent3-bd83a8aa-923b-4526-97e8-47eac0986ff7-SP4d91e6081ac3.I.0.0 (4236): Prepare generation: 324 documents
    IndexRouter[SP4d91e6081ac3]: Caught exception when preparing generation GID[7570]: (External component has thrown an exception.): System.Runtime.InteropServices.SEHException (0x80004005): External component has thrown an exception.
    GenerationDispatcher[SP4d91e6081ac3]: Failed to prepare GID[7570] in 453 ms, failed on cells: [I.0.0], stale services: []
    Journal[SP4d91e6081ac3]: Rolling back GID[7570] to GID[7569] prepGen=GID[7569]
    Remote service invocation: method=RollbackGeneration() Service = { Implementation type=Microsoft.Ceres.SearchCore.ContentTargets.IndexRouter.IndexRouter Component: SP4d91e6081ac3I.0.0.IndexRouter Exposer Name: GenerationContentTarget} terminated with exception: System.Runtime.InteropServices.SEHException (0x80004005): External component has thrown an exception.
    RetryableInvocation[SP4d91e6081ac3]: Exception invoking index cell I.0.0. Retrying in 2 seconds: System.Runtime.InteropServices.SEHException (0x80004005): External component has thrown an exception.
    Journal[SP4d91e6081ac3]: Rolling back GID[7570] to GID[7569] prepGen=GID[7569]
    The Question What is causing this? And how to prevent it? It happend twice in two weeks
    nows. Out of the blue, no config change has been made, all disks have enough space.
    Known Fix This resolves the problem, but doesn's address the root-cause of the problem!
    Stop all crawls.
    Wait a few minutes to let the crawl come to a complete stop.
    Reset the index (clearing all!)
    Start a full-crawl. In the meantime no search is available to the end user (boohoo!)

    Hi,
    I searched for the similar error log, the issue is finally solved by adding more drive space even though they though there is plenty space already.
    https://social.technet.microsoft.com/Forums/office/en-US/d06c9b2c-0bc1-44c6-b83a-2dc0b70936c4/the-item-could-not-be-indexed-successfully-because-the-item-failed-in-the-indexing-subsystem?forum=sharepointsearch
    http://community.spiceworks.com/topic/480369-the-item-could-not-be-indexed-successfully
    From your decription, the issue seems to occur to your full crawl. There is one point in best practise for crawling:
    Run full crawls only when it is necessary, the reasons to do a full crawl are as below:
    https://technet.microsoft.com/en-us/library/jj219577.aspx#Plan_full_crawl
    https://technet.microsoft.com/en-us/library/dn535606.aspx
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Item cost not found for one or more items - Inventory Posting

    Good Day Mentors,
    My user has encountered an error during Inventory Posting and its "Item cost not found for one or more items".
    The specific Message ID from SAP's System Message Log is 10001287.
    I found a similar post which addresses this error here.
    But unfortunately it did not help me solve my user's problem.
    I already checked if the items had a defined "Item Cost" in the Item Master Data Inventory Tab, and they all have "Item Cost" defined.
    I'm not sure if this will help, but below is the Inventory Audit Report of one of the items that is throwing the "Item cost not found" error.
    I am not a business consultant neither am I literate in accounting, so thanks for the patience.
    SAP Version: 9.0 PL5
    Valuation Method: Moving Average
    Thanks in advance!
    Sean

    Hi Augusto and Raviraj,
    I've already verified in our production database the points you made:
    - Is the "Manage Item cost per warehouse" selected in the Basic Initialization Screen?
    YES
    - Is the "Manage Inventory by Warehouse" ticked/checked in the "Inventory Data" tab of the "Item Master Data" screen?
    YES
    * I apologize for not have been able to give this information upfront.
    Anyway, the database only has one warehouse at the moment.
    I've checked the items, like the item in the screen shot above, and it does have an item cost.
    Below is the screenshot of the sample item from my original post,
    Thanks in advance!
    Sean

Maybe you are looking for

  • Web Dynpro Application throws NoClassDefFoundError for IAspect

    Hi All I decided to teach myself a little bit more about Web Dynpros and the Composite Application Framework and as such started working through SAP's tutorials. Currently I'm busy with 'Using a Composite Application via a Web Dynpro UI' - at the sec

  • Links in object states don't work

    I have an object state with several text boxes, hyperlinks and buttons works fine, UNTIL i create buttons to control the object states appearance. Then the integrated links in the mso don't work. Have tried with new document, new folio etc. As soon a

  • AS2 MDN is erroring

    Hi All, I am using AS2 to communicate with a supplier. The setup is :- Host Trading Partner :- Acknowledgement Mode          Sync Global Usage Code          Test Is Non-Repudiation of Receipt Required          True Is Non-Repudiation of Origin Requir

  • WCF-Sql Addapter polling issue

    Hi All, I am getting the following error when receive location is started. System.Data.SqlClient.SqlException (0x80131904): Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. ---> System.

  • Moving average price/standard price via iDoc

    Hi, I would like to distribute moving average price and standard price on price change (price changed via transaction event or MR21) to external system. Is there a way to accomplish iDoc (MATMAS) triggering on price change? Any idea on how to track c