New House Buids

We have been looking at moving house, new build and one things I look for is the master socket....they dont appear to have one.
Our current house (14 years old) has a master socket, and outside there is a grey box/cover for the BT line. New builds have the same external grey cover but the external box is now rectangular, much larger.
First thought is that the BT line stops at this box and all the internal points are fed into this, as all the internal sockets are single phone points, and I'm therefore wondering if its possible to fit a dedicated ADSL socket thereby negating ADSL filters.

Hi
The latest new builds have what is known as an external NTE, shown here.
The inside looks like this:
BTs incoming cable is terminated under the red cover, the end users cable terminates on the right hand side under the screw terminals, BTs responsibility stops at this point. The yellow removable plug is used for testing purposes. There is no socket in here for testing like the earlier NTEs.
You could install your own NTE in your premises as this would be on your part of the wiring (just remember BT would not be responsible for it) You could then install an NTE 2000 frontplate as shown here.
My only concern is there is an electronic circuit in both the external NTE and the new NTE that "may" cause problems on your line.
Best just try it and see.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

Similar Messages

  • How do I move my AirPort Extreme time capsule from my old house to my new house without losing the backups?

    I have an AirPort Extreme Time Capsule wifi router and I just moved to a new house and I need to relocate the device without losing any of my old backups from my old mac as well as my new Mac! I could really use some advice on how to do it without any problems! I really appreciate it!

    Physical location has no bearing on anything, since you're also moving your network and all other devices. Just plug everything in and it should work just as it did before.

  • The time-wasting/money-sucking mess that is Comcast service at new house

    Add me to the ranks of the unhappy comcast customers. I moved into a new house a month ago. I got Xfinity Home, Internet, and TV installed. The internet and TV did not work reliably - in fact they reliably did not work for most of that time, so I spent most of my free time calling, troubleshooting, having comcast people out to my  house multiple times.  After about 3 weeks of that I think my internet and tv are working more reliably. Now I have the time to turn my attention to XFinity Home Security, WHICH HAS NOT WORKED FOR ONE DAY.  I wont' go into all of the many ways it's not reliable, but it's not reliable.  and in fact I've never been able to actually set the alarm on my house.  I don't even know what's wrong with it AND I'VE SPENT ALL MY FREE TIME GETTING COMCAST TO FIX INTERNET AND TV AND DON'T HAVE ANY MORE TIME TO TROUBLESHOOT HOME SECURITY. here's the kicker: I spent all afternoon calling comcast, the first two people I got were helpful, or trying to be helpful - my main question is why I owe over $700 to comcast for one month of service.  Apparently $500+ of that is installation of the HOME SECURITY SYSTEM THAT DOESN'T WORK.  Also: I don't have that broken out anywhere I can see it. Anyway, the first two calls: the first one 20-30 minutes, the second one about 20-30 minutes I was put on hold while the person tried to figure it out and both times I was disconnected and they never called me back! the third time I got a guy saying I'm "way past my 30 day deadline" (I'm 5 days past it, thanks for exaggerating) when I got so fed up with why I have to pay so much money for somethign that has never worked adn I want it to go away.  He said if I want to cancel home security now it will cost another $660 to break the contract.  Break the contract?  I'm still waiting for Comcast to actually provide the service they contracted for.  How am I breaking my contract?  Not comcast? so...it will cost me over $1,100 to install and then remove and "break my contract" for a home security system that has never worked. and also: i get to go into comcast "customer service" land to try to do any of this.  Which means I will get disconnected and waste a bunch more time again. And since the comcast guys that installed my servie to my home actually cut the AT&T phone wires, i now can't just cancel comcast and get AT&T without another headache on my hands because comcast cut the AT&T cables that go into my house!!! all this, and I owe $738 that is due in 4 days!  I think the only thing Comcast worries about are accounts payable.  I don't think I've ever wasted this much time for nothing and been this angry and dissapointed with a service provider. there...all that venting and I'm still in the same place, which is nowhere.  Now that I think about it, the fact that comcast cut the telephone cables going into my house really takes the cake for me.

    Tdamb wrote:
    Now that I think about it, the fact that comcast cut the telephone cables going into my house really takes the cake for me.
    Typically the phone line is just disconnected in the phone compay's box on the outside of your house (it's called the NID). In some cases the tech may not be able to access the NID so they may physically cut the phone company's feed. It's a technical requirement because landlines carry voltage which interferes with the operation of VOIP phone systems. You would need to do the same thing with Vonage or other whole house VOIP systems. 
    Edit: I see someone already escalated your issue to corporate, so you should be hearing from someone at Comcast soon. 

  • I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help

    I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help.
    They said I need to change my settings to NAT settings. I haven't been able to figure out or find anything. I have also spoken to Apple Support on the phone for hours without being able to figure out how to do this ( i don't think he knew much either lol.) Please help me because I've got about 15-20 devices in my house that require to be connected to the internet and this is just making things ridiculously slow and painful for me.
    Thanks!

    It is on DHCP & NAT under router mode yet my isp is still the one issuing ip addresses to my devices instead of the router issuing them

  • HT1688 I want to order a new housing for my iPhone 4 (mine is scrathced pretty bad) I just dont trust myself to take the phone apart to do it.. If i bring it to an apple store will they change it for me ?

    I really wanna order a new housing for my iphone 4 (at&t)Ive dropped my phone a million times, and its even gone swimming
    its SURPRISINGLY not shattered, but has a ton of deep scratches in it. i saw on Amazon.com you can buy complete new housings for them, and i watched a couple youtube videos on how to change them, but i really dont trust myself changing it. my luck it destroy it and it will be garbage, and ill be left with no phone...
    question is.. Will APPLE put a new housing on it, if i buy it and bring it to them? (*i dont have apple care, or any kind of insurance on my phone*)

    No, they will only sell you an out of warranty replacement, which for the iPhone 4 is $149 (US).

  • HT4587 Hi, I want to set up a sound system in a new house using apple equipment. I have few sets of Bose speakers that I would like to utilise, my question is - what do I need to set it up and how do I do it with regards to  AirPlay? Thanks

    Hi, new to the forums and apple tbh.
    Moving into a new house and want to set up a sound system, thought apple would be the way to go as I have iPads, iPhones, iPod touch and nanos. I also have a few sets of Bose speakers which I would like to incorporate. What I am wondering is, what else do I need to buy to do this? Do I need seperate devices to attach to each speaker? Do I need a new router? And how would I configure it?
    Ideally I would like 4 rooms each with their own speakers that could play simultaneously.
    Thanks in advance!!!!

    First, please check out the following Apple Support article for details on setting up an AirPort Express Base Station (AX) for iTunes streaming. Note: You will need a separate AX for each set of speakers that you want to stream to. Also, note that you can stream a single audio file to one or more speakers, but you cannot stream separate audio files to different speakers simultaneously.
    Second, the Bose speakers you mentioned would need to have an audio input jack, either analog or optical digital to receive the stream from the AX. As you know, Bose makes a number of different speaker/home theatre audio options. If your specific model of speakers do, then it's just a matter to use the appropriate audio cable between the audio port of the AX and the speakers.

  • Moved to a new house and now i can't send emails but i can receive them

    I just moved to a new house and now i can not send emails but i can receive them...

    New houses can do that. 
    We need more info - what email service is this issue about.  Do you use several (gmail, yahoo, icloud,...) and is this issue the same for all?  If you also use a computer or other device, is this issue common to them all?

  • T-code F110 with a new house bank

    All,
    I have created a new house bank and when I attempt to do a payment proposal with the new bank I can get all the way to where the system tells me that posting orders have occured.  However, when I I attmpt to do a print out I go to the spool jobs and the print job is not there.  When you use are old house bank the print job always shows when you go to spool job.  Is there a setting I missed when setting up the new hous bank?  Any help would be great.
    Thanks,
    Sean

    Hey Sean,
    check your FBZP settings; paying company code; payment method etc... Also in your payment run check the extended log for any informational messages and double click on any relevant.
    Hope that helps.
    Jon

  • Connection speed new house

    I moved into my new house on the 1st of this month from only 4 houes away down the road wherei was getting about 12mbp/s speed.
    Soon as i moved here i was getting 10 then went down to 2mbs. I contacted them last week and said seemed unstable but seems ok now so removed a 2mb block i found they put on. i think the unstability may have been me turning router in and of few times...
    Since then  i havent seen a massive rise omly to 4mb/s and a disconection every day. will my speed go back to what i was getting before?
    here are my stats: 
    Uptime:    0 days, 6:30:21
    Modulation:    G.992.3 annex A
    Bandwidth (Up/Down) [kbps/kbps]:    1,127 / 4,463
    Data Transferred (Sent/Received) [MB/GB]:    268.53 / 1.45
    Output Power (Up/Down) [dBm]:    12.5 / 0.0
    Line Attenuation (Up/Down) [dB]:    15.5 / 26.5
    SN Margin (Up/Down) [dB]:    6.0 / 12.0
    Vendor ID (Local/Remote):    TMMB / IFTN
    Loss of Framing (Local/Remote):    0 / 0
    Loss of Signal (Local/Remote):    1 / 0
    Loss of Power (Local/Remote):    0 / 0
    Loss of Link (Remote):    0
    Error Seconds (Local/Remote):    1 / 0
    FEC Errors (Up/Down):    0 / 0
    CRC Errors (Up/Down):    0 / 2
    HEC Errors (Up/Down):    0 / 2
    Line Profile:    Fast

    bt speed test:
    Download speedachieved during the test was - 3579 Kbps
     For your connection, the acceptable range of speeds is 1200-4000 Kbps.
     Additional Information:
     Your DSL Connection Rate :4463 Kbps(DOWN-STREAM), 1127 Kbps(UP-STREAM)
     IP Profile for your line is - 3937 Kbps
    Upload speed achieved during the test was - 852 Kbps
     Additional Information:
     Upstream Rate IP profile on your line is - 1127 Kbps
    The phone line seems to be quite new with a openreach box installed upstairs in same room as water boiler if makes any difference? we have no other sockets installe in thehouse. will try the test socket maybe
    don't have wired phone but tried with ours dect phone and no noise really heard. using homeplugs for wired connection bt same speeds when plug straight in upstairs.
    Hasnt been connected long as disconnected itself. was connected about 20 hours before last auto reset. wondering whether to get them to install the line downstairs instea or upgrade to new hub?
    In

  • F110 posting with new house bank

    Hi,
    I created a new house bank for a company code and ranked it 1 and and ranked the cureent one as 2.
    When users performed F110, they found payment has been made from both the banks? Some of the invoices paid fron new bank and some of them paid from old bank. What could be the reasons of getting the Payment from Bank 2, when another bank is ranked as 1?
    I checked the currency for all the invoices are same.
    Quick response will be appreciated.
    Thanks & Regards,

    Hi
    When you run APP , during the payment , it checks for the Ranking Order and checks for the available amount in that Bank.
    Go and check in FBZP configuration , Setup Bank determination for payment transactions.
    I think the Bank which you gave the Ranking Order 1 is not having the sufficient amount available for payment iey it picked the Bank of ranking Order 2 and made the payment for other invoices.
    No where it is there that old invoices get payed by old house banks and new invoices will be payed by new house banks and generally in invoices we wont assign house banks.
    But in edit proposal you can change the house bank for the invoice if you want to pay from other bank.
    I repeat when ever you run APP , it checks for the Ranking Oder first and then for the available amount in that bank.If there is no sufficient amount to pay the invoices , it checks the Ranking Oder 2 , like that ..................
    Regards
    Venkat
    Edited by: Venkat Dara on Jan 5, 2009 8:50 PM

  • Time capsule not working properly after moving to a new house

    Hello,
    I have a macbook pro and a refurbished time capsule 2tb. I purchased both in 2013 and the time capsule at that time was used as both a wireless router for our house and my back up.I recently moved and didn't have access to the time capsule for over a month. Once I settled into the new house I plugged the power cable and internet connection into the time capsule and assumed that automatically it would keep working. It appears that it is backing up my system as I can pull up the application and see appropriate in-time documents however it consistently has a slow orange light blinking. I am not currently using it as a router as we have xfinity and have a different router for the house and when I try to use the time machine instead it cannot connect.
    My internet connection is fine and I would like to leave it as is. It also appears the back up function is working for my mac. The question is, does the orange blinking light matter and or is it indicating that I am improperly using the machine? It it because the ethernet cable is attached and can the time capsule work without this?
    I have tried resetting the capsule with the 10seconds hold on the reset button etc as seen on other posts but the orange light remains. 
    Thoughts?
    Thank you for your time and assistance,
    ahahn063

    The question is, does the orange blinking light matter and or is it indicating that I am improperly using the machine?
    The amber light is like the "Check Engine" light in your car. It blinks for a reason......the Time Capsule has a message for you.
    That message might be that there is a firmware update available for the Time Capsule that needs to be installed....or....that AirPort Utility has detected that the Time Capsule is not configured correctly to work with the Xfinity router that you are now using.
    To see the message.....open Finder > Applications > Utilities > AirPort Utility
    Click on the amber dot
    Then look for a Status setting, and click on the small amber dot there
    A message will appear to tell you why the Time Capsule is whining, along with a suggested action to fix the issue.
    If you are still having difficult, we for you to post back with the exact message that you see.

  • I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

    I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

    Urvergessen wrote:
    +You may have already done this, but do you have the first AirPort Express configured to "Allow this network to be extended"?+
    Could not find that setting anywhere.
    It's in AirPort Utility, AirPort panel, Wireless tab.
    When I'm within the range of the base station I connect normally, but further away the connection drops despite the fact that the other Airport is very close and light is green. Interestingly, my PB Pro has signal almost everywhere in the house, but my iPhone and Mac Mini don't. Most likely just a hardware difference?
    In AirPort Utility with the second Express, in the AirPort panel, Wireless tab, have you checked "Allow wireless clients"?
    The second AP does show an IP address: 10.0.1.3.
    With a "Configure IPv4" setting of "Using DHCP", that suggests that the second Express really is connecting to the first Express. In that case I have no other explanation of your your problem.

  • FF67 Manual Bank statement new house bank updation problem

    Hi Frds,
    I have one query regarding new house bank manual bank statement user worngly entered opening balance and closing balance same amount.Now he is trying to create 2nd statement but system is showing worng message and terminating.Kindly find below screenshot.
    1st statement status only entered.
    1. can i delete the 1 statement because statement status is Entered?
    2. if we are entering first time we should give the only opening balance?
    Transaction has to give transfer out clear sub account -/+?
    Kindly any one can suggest.I appriciate your valuable inputs.
    Regards,
    Nivas.

    It is Resolved.Thanks.

  • Problem after moving to new house

    I previously had no problem with wireless Airport Express connected via cable modem.
    Now I've moved to a new house and cannot get it to work. Same Internet Service Provider. The green light on AX is on. Internet Connect utility says I am connected to AX, and that AX is connected to the internet via ethernet (?). My MacBook recognizes the AX name and says it's connected wirelessly. But then I open Safari and cannot connect to the internet.
    I've reset AX by pressing the little reset button, and also reset it through Airport Utility. No luck.
    Finally, my wireless connection works fine through a neighbor's system.
    The only thing I know of left to try is connecting via an ethernet cable, which I don't have now.

    Oh, and I can use AX to play music wirelessly just fine.

  • Switched my contract to my new house and now I'm n...

    Hi there
    So I was meant to be moving tomorrow and decided to switch my Internet over yesterday morning to the new house, thinking I was saving myself the hassle of having to do it the day of the move, but instead it's created a big problem as we got a phone call from the estate agents yesterday afternoon saying that house won't be ready to move into until next week and depending on the amount of work, might not be available at all!
    Now I phoned BT this morning and explained the situation and asked them to cancel the order for now (or postpone it if that was possible but they didn't seem to understand what I meant) as I won't be in the house to receive the goods or let in installation guy in and I'll be in the house I'm currently in for possibly another week and would like to keep the Internet here while I am. 
    The guy I talked to hummed and he haaah and in the end told me I had called the wrong department and that he'd transfer me to the right one. And then he hung up on me Which I'm sure was a mistake but when I called back I got the same thing from the next person I talked to!
    My Internet is meant to be going of tomorrow and I would really prefer if it didn't and no one is helping me when I call. What should I do?
    Sorry about how long this is! 

    If you would like to try Live Chat they should be able to help you.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Maybe you are looking for