New Hunt Pilot for internal number is not working.

Hi support, I have a problem with the new hunt pilot number that created for internal use is not working. I had create 1 internal number (1090) for the Hunt Pilot number, and there are 2 hunt group member (9382 / 9387). These number will forward all to the mobile number 9382 will forward
all to 90176253579 9387 will forward all to 90133921295 Calling from 1941 to 1090 resulted failed but calling from 1941 to 9382 working and the call forwarded to mobile 90176253579. What might be wrong with the 1090 where i can't call that number from internal. From the DNA, it shows the call should reachable to the destination. I attached the DNA result for your reference.

Hi Mohd Afadzal,
Forwarding setting do no apply for Line Group members. As you mentioned that the Line group members
(9382 / 9387) are configured to forward all calls to their respective cell phones, this will not work.
You can use the HuntPilot's Busy or No Answer configuration to forward calls to an alternate number.
HTH,
Jagpreet Singh Barmi

Similar Messages

I have cs5 on my home mac. I had it on my old mac laptop. I deactivated it then went to reinstall it on my new laptop and my serial number does not work. Any help?

I have CS5 photoshop extended on my mac home computer. I had it also on my mac laptop. I deactivated it from my old laptop and tried to install it on my new laptop and the serial number would not work. Any thoughts?

David o"bryan did you migrate/transfer any files/folders/applications to the new Mac laptop? You can verify that your serial number is valid by checking under your account at http://www.adobe.com/. You can find more details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

New USB cord for 3rd gen Nano not working

Okay, I've got a 3rd generation Nano, and the original USB cord it came with was damaged, so I replaced it with an identical one. But now, when I hook it up to my computer, nothing happens---it won't even recognize that there is anything in its USB port. If somebody could give me any advice on how to handle this, I would really appreciate it.

No it doesn't. Sometimes it make a sound that it should when connecting but that is it. Never actually charges or syncs. And it is a brand new cord.

Adobe Illustrator CS6 serial number does not work on my new MAC. It does work on my old MAC.

I have Adobe Illustrator CS6 installed on my new Mac but the serial number does not work.
Do I need to remove the program on the old Mac first?

Thanks for you reply
Then I do not understand why the serial number does not work? I have tried to type it several times.
Regards
Einar Tyholdt
9. jan. 2015 kl. 16:16 skrev Monika Gause <[email protected]>:
Adobe Illustrator CS6 serial number does not work on my new MAC. It does work on my old MAC.
created by Monika Gause in Illustrator - View the full discussion
You can install it on two computers simultaneously, so uninstalling is not needed if it's the only other installation.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7080891#7080891 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7080891#7080891
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Illustrator by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I have successfully installed my creative suite to my old computer. I have a new one I would like to put it on. My serial number is not working. Please advise.

I need to install my program to my new computer. My serial number is not working.

Which Creative Suite version exactly?
Is your old computer Mac or Windows?
Is your new computer Mac or Windows?

New Otter Box for iPhone G4S, talking on phone with speaker on, I have to yell for anyone to hear me, like the internal mike is not working

New Otter Box for iPhone G4S, talking on phone with speaker on, I have to yell for anyone to hear me, like the internal mike is not working or some setting is changed? How do I fix this?

edith28 wrote:
New Otter Box for iPhone G4S,
No such model exists.

Error in J1INCHLN for internal number range

Dear Experts,
I am getting the below error when I am executing J1INCHLN. I checked J1INUMBER but of no use. Number range for 2008 is maintained. I am not able to maintain number range for 2009. Kindly guide.
Number range for internal challan numbers not maintained
Message no. 8I706
Diagnosis
Number range object 'J_1ICHLNNO' is not maintained fully.
System response
There is an error in the number range object and a new internal number can not be generated.
Procedure
Check if the number range object exists in your system and also check if number ranges for the number group is maintained for the current year. Maintain the number range object and then start this transaction. The transaction code for the number range maintenance is 'J1INUMBER'.
Regards
Komal

Hi
Go to SPRO>IMG>Financial Accounting (New)>Financial Accounting Global Settings (New)>Withholding Tax>Extended Withholding Tax>Posting>India>Remittance Challans>Maintain Number Groups
here define - cocode , section , tds section code , number group
now go
SPRO>IMG>Financial Accounting (New)>Financial Accounting Global Settings (New)>Withholding Tax>Extended Withholding Tax>Posting>India>Remittance Challans>Assign Number Ranges to Number Groups
here assign number group to Number range
now create number range go to SPRO>IMG>Financial Accounting (New)>Financial Accounting Global Settings (New)>Withholding Tax>Extended Withholding Tax>Posting>India>Remittance Challans> Maintain Number Ranges
here create a number range on year base
**some time you have to update the table so go SM30 and update J_1IEWTNUM , J_1IEWTNUMGR and J_1IEWTNUMGR_1 tables
Best Of Luck
Tanmoy

Assigning a new tax key for V0 and VAT not possible

Hi Experts,
Invoice is been created successfully in SUS , XML transfered to XI which in turn created the IDOC in ECC.
I get the below error while transferring theinvoice IDOC from XI to ECC.
Assigning a new tax key for V0 and VAT not possible
Message no. FD008
Diagnosis
In Financial Accounting customizing, the tax ID transferred in the invoice is missing so that the system cannot determine a tax code. The system could not determine an entry with the value V0 nor with the value VAT .
Procedure
In Financial Accounting customizing, include the external tax ID and a corresponding internal tax code for the present partner.
Please let me know if I am missing any setup in ECC as I have already maintained the setup in OBCA, OBCD and OMRY.
Thanks,
-Devi Swain

Hi Devi,
Can you please tell me ,how you resolved this issie,I am getting same error.I I have already maintained the setup in OBCA, OBCD and OMRY.
Thanks,
-Sunil

Error in ME59N- Internal number assignment not defined

Dear Gurus,
I am getting error while creation automatic PO In ME59N. Below error shows
Error Name                                                                                          Massage Class          Msg No.
PO header data still faulty                                                                            MEPO                         2
Internal number assignment not defined (please enter number)                 06                              243
I have done all the setting in Material Master & Vendor Master for Automatic PO Genration.
Aslo I maintain the source list & Info Record for two vendors.
I assign the source of supply in PR .
After this when I exicute in ME59N by entering Purchasing Group,Purchasing Org,Vendor,Plant
and selected the Per Requisition , per contract tab.
After this above two error is showing in SAP.
Kindly give us solution to resolve this.
Regards.
Abhijit
Subject changed to reflect the issue- by: Jürgen L

Hi
The error is probably caused because T161-NUMKI = <BLANK>. Please fill in the valid T161-NUMKI.
This needs to be done in customising
Transaction SPRO:
Material Management -> Purchasing -> Purchase Order -> Define Document types
Number range in the case of internal number assignment
Hope this information is of help.
Kind regards,
Lorraine

I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for

I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for Premiere. I dont have any other serial numbers. What do I do???

Static_Unit
I am getting a bit concerned about what is happening in your situation. Yesterday you posted your question in at least two different forums, one of them being here in the Premiere Elements Forum.
Don't Have Serial Number for Premiere, Only Photoshop?
Wherever you posted, the reply was to contact Adobe via its Adobe Chat. It is the only one who can sort out this matter for you.
In the thread cited above I offered to help you with the difficulties that you were having visualizing the Adobe Chat in its web page. I was waiting for your follow up on that in the above thread. Instead, I find your same question in a new Adobe Premiere Elements Forum thread this afternoon with no refer the prior threads or prior recommendations given you.
I will also mention again...when you buy the Photoshop Elements and Premiere Elements bundled in one packaging and with installation files for each on the same installation disc, each program has its own serial number. The Photoshop Elements serial number does not work for Premiere Elements and vice versa. The serial numbers are on labels on a box which houses the installation disc envelope(s). So, if you purchased both programs and found the Photoshop Elements serial number, then the Premiere Elements serial number should be in a label right underneath the label with the serial number for Photoshop Elements. I recall writing this in your yesterday's thread on this matter.
The moderator will no doubt be along shortly to close or delete this thread. So, just in case, please bookmark your yesterday's thread cited above so that we can continue this communication which is trying to help you.
Thanks.
ATR

PO Error-Internal number assignment not defined

dear all gurus,
while i am creating the po and save it, the error occurs that Internal number assignment not defined (please enter number).
i hv already defined the no. range for the po.
now what should i do further in these matter.
rgds,
rajesh

Dear,
SPRO - Materials Management - Purchasing - Purchase Order - Define Document Types.
Select your document type and Assign your number of number range in number range intraval.
Regards,
Mahesh Wagh.

My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone.

My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone. Got any suggestions?

Hi there Lizabethfromaz,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

My Photoshop Elements serial number is not working? The CD says it is for Windows XP/ WIndows VISTA...and my currest OS is Windows 7? Is that the issue

My Photoshop Elements serial number is not working? The CD says it is for Windows XP/ WIndows VISTA...and my currest OS is Windows 7? Is that the issue?

This is a question for the Photoshop Elements forum: Photoshop Elements. A moderator may find and move this to the correct forum for you.
Benjamin

I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards Vicki

Hi,
I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards Vicki

The trial is always extended. The serial number you enter determines whether it runs as standard or extended.
I'm getting through fine with that link, so it must be a browser issue or some such thing. Try another browser.

"Settings for material number conversion not found" occurs when ...

After I run an initial load data into the InfoCube 0PUR_C01, I want to check the InfoCube Content by the following path:
RSA1 -> pick up the InfoCube 0PUR_C01, right click it and select Manage -> Get to Content tab -> Click InfoCube Content button -> Deselect all selection, only tick the 1st column checkbox next to 0Material, then hit enter, get a small window titled as "Cancel" with a red STOP msg sysing "Settings for material number conversion not found" with an "Exit" button and a question mark button, click Exit button leads to SAP Easy Access screen, if clicking the question mark button, another window pops up with the msg showed above, click Technical Information button causes the original window short dump and the short dump msg shows below in between two dashed lines:
Runtime Errors         RPERF_ILLEGAL_STATEMENT
Date and Time          11/28/2005 14:43:13
ShrtText
    Statement "CALL SCREEN" is not allowed in this form.
What happened?
    Error in ABAP application program.
    The current ABAP program "SAPLSHL2" had to be terminated because on
    statements could not be executed.
    This is probably due to an error in the ABAP program.
Error analysis
    There is probably an error in the program
    "SAPLSHL2".
    The program was probably called in a conversion exit
    or in a field exit. These are implemented by
    function modules called CONVERSION_EXIT_xxxxx_INPUT/OUTPUT or
    USER_EXIT_xxxxx_INPUT.
    Conversion exits are triggered during screen field transports or
    WRITE statements, field exits during field transports from the
    screen to the ABAP/4 program.
    In this connection, the following ABAP/4 statements are not allowed:
    - CALL SCREEN
    - CALL DIALOG
    - CALL TRANSACTION
    - SUBMIT
    - MESSAGE W... and MESSAGE I...
    - COMMIT WORK, ROLLBACK WORK
    - COMMUNICATION RECEIVE
    - STOP
    - REJECT
    - EXIT FROM STEP-LOOP
    Moreover, conversion exits for output conversion
    (implemented by function modules called
    CONVERSION_EXIT_xxxxx_OUTPUT) do not allow
    - MESSAGE E...
    to be used.
Trigger Location of Runtime Error
Program                                 SAPLSHL2
Include                                 LSHL2F19
Row                                     3
Module type                             (FORM)
Module Name                             TECHNISCHE_INFO5
rce Code Extract
e SourceCde
1 ***INCLUDE LSHL2F19 .
2 form technische_info5.
>>   call screen 1900 starting at 5 8.
4 endform.
5
6 &----
7 *&      Form SHRINK_VALUES
8 &----
9 *       text                                                           *
10 ----
11 * --> p1        text
12 * <-- p2        text
13 ----
14 form shrink_values.
15
16   loop at dynpselect.
17     clear checktable.
18     if dynpvaluetab-lowvalue ne space and dynpvaluetab-lowvalue na '*'.
19       move 'EQ' to checktable-op.
20       move dynpvaluetab-lowvalue to checktable-low_value.
21       append checktable.
22     endif.
What could cause the problem by selecting only 0Material when checking the InfoCube 0PUR_C01 content? What does that mean by this STOP msg "Settings for material number conversion not found"?
Thanks

Hi Kevin,
Set the length of 0MATERIAL and change conversion to alpha:
Re: Error Installing 0MATERIAL from Business Content
Best regards,
Eugene

New Hunt Pilot for internal number is not working.

Similar Messages

Maybe you are looking for