New iMac 24" LCD issue

Hi all, hope somebody here can give me an accurate answer or how serious my problem is.. Basically the whole iMac runs beautifully however just a problem with the LCD screen - on the left side about a 1/4 my browser window with a white background is bright white - but when i drag the window towards the centre to the right side it is all dirty white (dull light brown) - is this a serious problem with the LCD screen? I've only had it under two days now..
I'm not sure if this is a normal behaviour for an LCD

CJ, you have a sharp eye. It took me two days before I noticed it, but there is a slight variation from the extreme, white left side and the rest of the screen. There was some mention about these screens being bad for calibration (that conclusion is incorrect, I use a Monaco X-Rite DTP94 and ColorEyes to get good color fidelity) ... but I am disturbed by this brightness variation.
I considered returning my iMac, so I dropped by the Apple store today and checked out all of the 24" iMacs. I believe this occurs on all of them. I spent some time with an incredulous Apple Store employee, and after a while of staring and comparing he admitted that there was a slight variation. It might not actually be differing brightness, but a slightly different tone between the extreme left and right sides of the screen.
Anyhow I think I'll just get an Eizo 24" monitor to run as an expanded desktop with the new iMac, but from my inspection this appears to be a phenomenon that affects all 24" monitors, and returning your iMac for a new one will probably end in the same result.
You have hawk eyes to even notice it, it's a very subtle gradation, but nevertheless real.

Similar Messages

  • New iMac 27" screen issues!!!

    Does anyone experiences this situation on their iMac with new "Screen LaminationProcess" ? 
    After leaving a white image still for couple minutes on the screen (Example: Web Site), a sort of halo remains.... This is noticeable when I working on applications with gray GUI's like Adobe Photoshop, Aperture, iMovie... pretty much any application.
    I am kind of upset because the computer is only 1 month old and I just noticed this problem. Besides, there are some awkward brighter spots on the edges of the display… it seems like there is a leak of light from the inside out. That cannot be shown on the screen shots but they are bery anoying when watching a movie... ;(

    You really should call AppleCare first.  Let them be aware of the problems you are having.  You will get a case number.  Keep it in a safe place.  It just may come in handy if the exact same problems crop up in the future after your warranty runs out.

  • Buying a new iMac.  But when!?!?

    Hello everyone. I am very excited to say that sometime in the next few months I am going to be getting my second iMac! I bought my first one (a 17" 1Ghz iMac with 768 RAM) about 5 years ago while in college... and it has been a good ride ever since!
    The computer still works perfectly for every day stuff, like email, the web, iTunes, and such... but it is really starting to lag when I do iPhoto, iMovie, iWeb, etc. I'm sure most of you know what I am talking about.
    I'm finally ready to make the upgrade now that Leopard is here... and I am just trying to make sure that I time it right. When I bought my last one, I made the mistake of buying about 2 weeks before they added USB 2.0... which would have made a huge difference for me, since one of the biggest reasons I am upgrading now is that I can no longer sync my iPhone with the msot recent update which killed USB 1.1 compatability.
    But, that is neither here nor there.
    Anyway, I am hoping to buy in the next 2 months if possible, but for many reasons I want to make sure I time it right.
    1) There has been quite a few problems with the first alum gen of iMac screens, graphics cards, etc. I would like to wait for the second revision if possible.
    2) Macworld is in January... is there any possibility new iMacs will come out around that time?
    3) How far do you guys think Blu-Ray compatability is from being added to macs? When it comes out do you think it will be burnable Blu-Ray or just readable?
    I found a website which tracks updates to all of Apple's computers, and attempts to tell you whether the time to buy is right or not, and that seems pretty interesting... http://buyersguide.macrumors.com/#iMac
    But I am curious about what you guys think. If you were in a position to get a new mac... but weren't really in a big hurry... when would you buy? Right away? After Macworld? Wait until the next version comes out (whenever that is)? I guess there are nearly limitless options here, and obviously you can't always wait because things like this are always changing and always improving.
    But, nonetheless, would you wait for the next revision? When do you think it will take place?

    It's unlikely there will be any changes to the recently released iMacs at Macworld Expo. I've just recently purchased a 24" 2.8GHz iMac w/750GB HD, and immediately upgraded to 4GB with Crucial memory, and it's working out great.
    The ATI HD 2600 video card issue was resolved in early November. Anyone having a problem now is probably having a hardware issue, vice the software issue fixed by the early November patches (1.2 for Tiger/1.3 for Leopard). My iMac was built in week 45, and has had NO video anomalies at all, certainly no freezes attributed to the video card issue.
    The front of the new iMac is covered with a large sheet of glass, which is very reflective. However much that concerns you depends on you. It concerns me not at all. The new iMac 24" LCD is very bright, overpowering any reflections while the Mac is in use. There's a window behind me that I've never noticed while using the Mac.
    The only issues I've had with the new iMac involved incompatible apps I migrated over from my old 2.7GHz G5 Tower. I've weeded the troublesome apps out and my Mac is now working perfectly.
    It's probably wise to wait for Macworld Expo the third week in January to see if there are any surprises, but you should have no concerns about the currently shipping 24" iMacs. They're great machines.

  • Front Row: Photo Doesn't Play Subfolders on new iMac!

    There doesn't seem to be a discussion group dedicated to Front Row but I'm having a problem with the Photo section so I guess this is the closest!
    When viewing the Library, Albums or Folders in the 'root' directory of iPhoto through Front Row, everything works fine.
    BUT
    If I try to view an Album or Folder in a sub-directory, the contents of that Album is not displayed. Instead the contents of which ever 'root' Album was last viewed is displayed instead.
    This is easy for someone to check, can anyone with a new iMac dupliacte this issue?
    Cheers,
    Kudos
    iMac Core Duo 2.0Ghz 1Gb Ram 256 VRam Mac OS X (10.4.4) Powerbook 15" 1.5Ghz G4 1Gb Ram

    Hey !
    Thanks for the info. It's always nice to know
    "I'm not the only one!"
    Still, strange behaviour though. I hope they fix this with the Front Row update that's coming.
    Cheers,
    Kudos
    iMac Core Duo 2.0Ghz 1Gb Ram 256 VRam Mac OS X (10.4.4) Powerbook 15" 1.5Ghz G4 1Gb Ram

  • Set up of new iMac - need to sync existing iPhone & iPad but cannot

    I have set up a new iMac and cannot get any of my itunes backups to sync my iphone and ipad to the new mac. My iphone & ipad were all synced to my old windows laptop via itunes and everything synchronized - mail, calendar, music etc. Now I am setting up a new iMac and I signed up the itunes via iCloud. This has only set up anything purchased through itunes and about 90% of my music was not purchased through itunes so most of it is missing. So I have spoken to apple support on the phone and they guided me to transfer my old windows media to the new iMac using migration assistant. Unfortunately this wouldn't connect, so I am back to square one.
    So now I have manually moved all of my photos and music manually using an external hard drive - so that has taken over the largest amount of files to the new iMac but my issue still remains that nothing will sync to the new iMac. I am totally lost now and have no idea how to approach it.
    I tried to back up the iPad and iPhone to iCloud but even that won't happen - so basically everything is still syncing to my old windows laptop and nothing is syncing to my new iMac.
    Does anyone have any suggestions how to approach and where to start. I am based in Dubai and there is no apple store here so I can't even take it all in and just get it all sorted and I am not getting much help on the phone as the tech support is 9-5pm work days only and I am at work and not in front of the iMac to try any troubleshooting.
    Any suggestions are WELCOME!
    thanks,

    sign out of the itunes on the PC and then sign into the itunes on the ipad iphone and imac w/ the same apple id make sure that all 3 devices are authorized to the same apple id and then you should be able to start syncing the phone and pad to the imac.

  • Driver issue with Windows 8.1 on new iMac 2013

    Just got a brand new iMac and am attempting to install Windows 8.1 on it. The Boot Camp Assistant kept timing out on the support software download so I downloaded Boot Camp 5.0.5033 from Apple support and put that on my external FAT drive.
    I was able to get Windows installed, but when I attempted to run setup.exe off of my external drive, I got a "Boot Camp x64 is unsupported on this computer model" error. I was able to work around this by running bootcamp.msi from a DOS prompt in administrator mode at which point the install seemed to go through successfully.
    Despite that, I'm still getting no love on WiFI, bluetooth, audio, etc. I'm attempting to download again through Boot Camp Assistant on the hope that there's a later version for my machine that's not yet available for direct download but am not optimistic.
    Any thoughts/ideas would be great appreciated. Note that I am running the latest everything on the Mac side (recent 10.8.5 Combo). 
    Thanks in advance.

    Actually, that link is exactly what got me in trouble. Use Boot Camp Assistant to get the drivers.
    As of this writing, Boot Camp 5.0.5033 will not adequately set up your drivers on a new iMac with Windows 8.1.
    The only way I was able to get the WiFi working was to use the drivers automatically downloaded by Boot Camp Assistant. Presmably this is a newer version than 5.0.5033 but I haven't been able to find it anywhere else for download. 
    I should also note that I was having some DirectX issues running graphics intensive software even after updating through Boot Camp Assistant. These were resolved by downloading the latest driver for my video card (GeForce 780M). There might be other issues that will require a manual driver update but I've yet to run into any more.
    Best of luck.

  • So many issues - family of 5, i am using my wifes apple id on my iPhone, my daughter is using my apple id on touch, i need to get all iTunes content off an old PC onto new imac and i just got iphone 5 and want to be able to have evreything work - help!

    5 plus years ago my wife had the only Apple ID and as a family we all used her Itunes account to buy and listen to music.  A couple years later, I (husband) bought my first iPhone - the only iDevice in the household.  When I set that iphone up, I used the wife's apple ID as I wanted access to all of the itunes music we had as a family.  So now years later, all of my Apps etc have been purchased via the Wife's Apple ID.  To make matters worse for my situation, my 10 yr old daughter got an iTouch for Christmas and i decided to use my actual (husband) Apple ID as daughter is a minor and I felt I could manage her iTouch Apps content that way.  We have just recently bought our first iMac and I had yet to understand or get to work the iCloud or the Home Sharing of iTunes.  To make matters worse, I have never synched my 3G iphone because of the whole Apple ID issue.  I should also mention that the primary 'authorized' computer for my wife's itunes account is an old PC that we almost never use anymore as it runs soooo slow.  So I am left to wonder how to go about making the transition to get the old PC 'deauthorized' after I somehow transfer all itunes files from the old PC to the new iMac.  I now have the new iPhone5 and i REALLY want to get to the point where i have my iphone on my apple id and my wife has her apple id (no iphone for her yet - probably coming soon though).  On the new iMac i have created a login for me and one for my wife.  I was able to login to itunes on her imac login and i was able to set up iCloud.  it works! - but now my calendar, contacts, photos, etc are on her profile login of the iMac!  HELP me PLEASE!!

    Your Apple ID should not be causing problems with your browser. If you describe the problems you are having we might be able to help with those.
    regards

  • Multiple Issues with iTunes on New iMac

    Hello Apple Community,
    I recently bought a 27" iMac with 3.1Ghz i5 processor running on Snow Leopard and finally set it up.  I have owned many Macs in the past and currently have been using a 5 year old 15" MacBook Pro on Snow Leopard that has been running flawlessly but I needed something with a bit more processing power.  When I first took my iMac out of the box I went ahead and used the Migration Assistant to move my applications and files over from my MacBook Pro but after multiple attempts I had to stop and simply move the music, document, and photo data on to a portable hard drive while I got the Migration Assistant to move the applications.  I simply moved the old iTunes music folder over to my new iMac and replaced the iTunes folder on my iMac.  The new iMac has already been authorized through my iTunes account and the music will play.  Now here are my current issues.
    When I play a song on iTunes, there appears to be a random amount of fade-in and/or crossfade when I switch playing songs.  I have checked the playback preferences and crossfade is not checked.  Some songs the crossfade will take a second while sometimes it will be as much as 10 seconds of crossfade.  On my MacBook with the identical library and settings, it does not have these issues.
    The other issue I have been experiencing is if iTunes has been open and my computer sits for a little while (usually after awaking from sleep or even listening to a few songs without touching the keyboard, the songs will stop playing on their own and when I press the play button, it begins to "play" the track but there is no sound coming from iTunes.  I have checked the volume slider in iTunes and it is still at max volume while all other applications still work and output sound.  iTunes will only work properly if I close it and re-open it.
    The final issue is similar to the last one in that when I try and play previews in the iTunes Music store it will not play but when I hit the play button iTunes will then appear to be "playing" but no sound from either the store or any of my songs from the Library.
    iTunes works perfectly fine on my MacBook Pro and it does have any of these issues.  Both Macs are currently running iTunes 10.4.1.  All songs in each library are checked and will play to a degree.
    I have deleted iTunes and all corresponding library files, (basically anything with iTunes in the name) and tried to reinstall iTunes and used multiple methods to replace the music files including using Home Sharing, a portable Hard Drive, and dragging and dropping the music files from the shared folder and no matter what I try, I still cannot get iTunes on my iMac to work properly.  I have been searching around the support forums for others who might have had this issue but I cannot seem to find much.  Any help would be greatly appreciated!

    I had not tried that before, but from your suggestion, I went ahead and did it and it seems to have gotten rid of the crossfade issues I was experiencing but whenever I try and listen to a preview in the iTunes music store it still does not appear to be working.  Also, I was testing a number of tracks and it seems like there are a few tracks in particular that will make iTunes stop playing when I click on them and then if I attempt to play something else, iTunes says it is playing but no sound is coming from it. 
    What I have found that is interesting is the first time I ran the Disk Utility it repaired a HUGE number of misc. files.  After running it and still experiencing problems I tried to run it again but this time the files were not as numerous and were all within the /Library/CoreServices menu.  Each subsequent time I ran the Disk Utility and rebooted, I tried to run the Disk Utility again and the same files seem to still be having the same issues.  This is just an example of one of the files I have been having an issue with.
    Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib" , should be drwxr-xr-x , they are -rwxr-xr-x .
    Repaired "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib" .
    One in particular gave me a Warning and said it could not be repaired.  I'm not sure if it is important to repair but I still seem to be having some issues here and there.  Here is the message from the Disk Utility regarding the file in question.
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

  • I have a itunes 11, iMac, iPad sync issue... all new kit, the itunes library and photos are on a networrk drive but syncing is useless, no music, no photos, no video, sometimes music and videos may be visible but greyed out on the ipad....

    This is my first posting so sorry for the messy title... I didn't realise how it all worked here.
    I have a shiny new imac, shiny new ipad and have all my media on a network hard drive - itunes works fine on the mac - no problems - photos visible in finder and photoshop - no problems, but when I come to sync the new ipad - several things may happen (I have tried many times now)
    1) a long wait - whirly gig round spinner thing - then music visible on the ipad but greyed out and useless
    2) no photos at all synced
    3) no videos synced
    4) info syncs ok
    5) apps seem to have synced OK
    It is not a data size issue as the same amount of data synced before the new kit from my old windows pc on to an iPod - I daren't try syncing the ipod as I need it for my next business trip.
    I tried removing the ipod cache files for the photos - no difference - I tried restoring the ipad - no difference
    Have I completely wasted a large amount of money?

    ps when syncing it jumps through steps 1 - 4 real fast, i seem to remeber iphone showing the number of tracks transferring and names, but i see nothing? then it sits on 5 saying "waiting for changes to be applied"

  • Can't install CS3 Upgrade on NEW iMac 24". An Imac DVD drive issue?

    My CS3 Design Premium Upgrade CD fails to install Photoshop on my BRAND NEW iMac yet it is able to install everything else on the CS3 disc. I just bought this iMac yesterday and CS2/CS3 Upgrade are the FIRST things I installed (besides updates) when I turned it on. I'm still using 10.4.10.
    I searched through the Adobe forums and the internet as to how others with the same issue have dealt with the problem, but it seems the most common reason is that people had installed Photoshop CS3 beta previously as well as older Flash/Acrobat plug-ins conflicting with the installation process. Further, these causes seem to be effecting Windows users.
    So a few hours ago I tried to COPY the upgrade CD contents to my hard disk, I get the message:
    "The Finder cannot complete the operation because some data in 'AdobePhotoshop 10en_US.dmg' could not be read or written. (Error code -36)."
    This procedure of copying to the disk (and the resulting error message) is SPECIFICALLY addressed in the Adobe support pages TechNotes:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401429&sliceId=2
    The page says that it may be a drive issue that is causing the problem. Of the 7 possible solutions given on the page, I've narrowed it down to only 1 option left (but I can't try it since I don't have another Mac!):
    "*Solution 4*: Copy the software to the hard drive of a different computer.
    *If the software copies successfully, the model of DVD drive on your original computer might not be able to read the DVD. Contact the DVD drive or computer manufacturer for any updates that might be available.*"
    But what's funny (or annoying rather) is, I had a 20" Alum 2.4 iMac earlier this year (returned because of screen problem), and the CS3 upgrade installed without any problems on it!..??? And according to the iMac specs, the 20" and 24" models both have the same DVD drive make right?
    Any ideas??? Are there other 24" iMac users who are experiencing similar problems? If not, then I guess I may have to return yet another iMac...which I'm reluctant to do since this screen is PERFECT! I'm scared to get another iMac with the dreaded screen gradient issue.

    I just solved the problem.
    I tried copying the DVD files to the hard disk about 7-8 more times. The last try SUCCESSFULLY copied to the disk and I was able to install Photoshop CS3.
    Yay.

  • Brand New iMac 24" 2.8 GHz Intel 2 Core Extreme 500 GB Hard Drive Issues

    Had a 2 week old iMac 20" 2.4 GHz 320 GB hard drive that I purchased from the Apple Store online on 12/09/07. Got delivered to me on 12/13/07. After 7 calls (on 7 different days) to Apple Care Support, my iMac could not get onto the internet network in my apartment.
    Had Apple swap my unit and I got the top of the line model out there now, the iMac 24" 2.8 GHz Intel 2 Core Duo Extreme with 500 GB hard drive. Still, can't connect to the internet.
    I've got Time Warner Cable as my internet service provider (High Speed Internet Access). I'm using a brand new Airport Extreme as my base station in the living room, and a brand new (all exchanged through AppleCare) Airport Express which I'm using to extend the network as a bridge.
    My new iMac is in the study den in my apartment, and my MacBook Pro gets signal from anywhere in the apartment, but when I use the iMac, and click on my secure network using the WPA2 passcode that I set up, the iMac tries to connect, and says "Connection Time Out" and then "Connection Fail."
    I've read posts throughout these forums saying that there are issues with the new aluminum iMacs that came out.
    I'm running Leopard 10.5.1 on both machines right now, and even with the swap from the 20" to the 24", I still have the same problems.
    Gonna have to make another angry call to AppleCare Support tonight to see if I can get this thing resolved.
    Anyone else have any other suggestions to getting this fixed for my iMac?
    What about using a different router besides the Apple Extreme or Airport Express? Any ideas?
    Thanks

    ok try this with your MAC BOOK PRO
    Go to your system preferences go to the apple icon and then hit system preferences. From section where it says Internet & Network, there you should see an icon folder that says Sharing, In tiger its like that I don´t know how it is in Leopard, but if it is the same we are in luck. Ok Go to sharing and in sharing go to airport option in airport option make a 128 bit wep key and make a sick *** long password hit ok. Now go check the box that says Airport and then hit the start button to start using your MAC BOOK PRO as a router. Now go to your sick *** I wish I had your 24 inch Imac and here I am stuck with my old Imac early intel, and hit the airport extreme icon oh by the way you should also enable your MAC BOOK PRO airport extreme which now it is a WIFI Router trasmitter I Hope I was of any help

  • Help! pc to new iMac - HDD not 'seen' on pc... ethernet cable issue too!

    Hi all
    I just got my new iMac a few days ago and I've tried the ethernet cable and my mac can see the folders on the pc but wont open them! (the original item cannot be found)
    my ethernet cable isn't linked to the mac now but I can still see my computer in finder... both have the wireless going.. how do I 'choose' the ethernet cable.. maybe that's why it's not working?
    I've now got a western digital Studio edition 500mb external harddrive - I've plugged that into the mac and all is well... I was hoping I could then plug it into the pc and drag all the files over (65gigs) and then I can transfer them to the mac.
    I've used the usb cable on the pc (doesn't have firewire) and the pc does nothing!
    I can't see it and I've tried clicking on the removable disc drives but it says there's nothing connected.
    I know that the HDD is formatted for macs but if I format it for pcs then will I have the issue of transferring the files to the mac after?
    I'm totally confused and this is driving me nuts!
    the only other option I have left is to burn billions of dvds with my images and music. sob I really don't want to do that!
    I would like to be able to sync my ipod and iphone to the mac and not qet my music wiped! and to get my old crappy pc off my desk.
    someone heeeeeeellllllpppp please... will be very happy to get this sorted! my poor little old brain is fried!

    Thank you!
    I literally just got the same info from a friend (he was away for most of the weekend) and I'm now in the process of copying the pc stuff onto the hard drive (after formatting)
    transferred one pic and tried transferring it the mac and it worked... YAY!
    so now back to transferring everything from the pc to the HDD now... gonna take a while but at least now I'm on the way off getting rid of the pc
    Thanks for your help and response.
    (very relieved!)

  • CS6 New iMac non-recognized plug-ins issue.

    I have a brand new iMac and when I started using CS6 (transferred from my time machine back up), it was fine for a few days until inDesign started telling me various plugi-ins were not recognized. I had to uninstall, then re-install and it seemed fine for a few days, then started to give me the same non-recognized plu-ins error messages again. What gives? Any suggestions? Think it could be a Mountain Lion issue not an Adobe issue?

    What else did you migrate over? There's no telling what you danaged that way.
    That said, can you post screenshots of the error messages? Something might just stand out that would let us help you.
    Bob

  • Sandy Bridge processors in new iMacs issues.

    Hello
    Does anyone know if any of the faulty Sandy Bridge processors which were produced at the start of the year made it into this iMac refresh? Or did Apple wait until the updated versions were produced before using them in their macs? By updated versions I mean the completely non faulty new versions of the chips not the ones that went back to intel and they just patched them up before sending them back out to vendors.
    I am in the market for a 27" i7 iMac upgrade but this is the only issue stopping me from buying one straight away. I was thinking of leaving it a few weeks for the initial stock which may contain these faulty chips to sell through then hopefully get an iMac from a newer batch.

    I'm sure it's pretty safe to say there are no issues with the current crop of Sandy Bridge procs in the 2011 refresh. Apple would make sure they'd cleared up any problems before rolling out the new iMacs, and If I recall correctly, Intel resumed shipping the corrected chips back in mid February. You should be fine.

  • Yes... There are issues with the new iMac, early adopters baby!

    Hi, I am a new iMac owner.
    Being a network engineer and having worked for the "devil" himself, let me tell you... I would rather be dealing with the tiny glitches with the new iMac than owning a Dell, Toshiba, HP but most importantly running Vista!
    This is a new machine with new HW and drivers. I enjoy trying the latest and the greatest. I realize there will be hurdles to overcome with any new product, but come one people! Let's stop whining, and help everyone out here. We are all here to provide constructive feedback to Apple while helping everyone out.
    Yes there Display issues.
    Yes there are Keyboard issues.
    Yes there are WoW issue and UT as well.
    Target disk issues.. Yes
    Lock ups.. sure!
    My suggestion... If you think you are better off with a PC and Vista, well go to it mate!
    Sorry for the ramble, but I just got tired of all the whiners thinking that buying an iMac was their solution to never having issues by leaving the PC world, or should I say MSWorld... LOL

    I think few, if any people claimed they were going to ditch their new iMac for a PC. I like Macs, but I don't love them like I used to.
    Half the reason people buy them, is because they think they can rely on Macs more. They are supposed to be stable, fuss free and easy to use. And they still are for the most part.
    But these new iMacs make a complete mockery of that because they don't represent very well what Apple stands for. "If" I bought a PC I would honestly expect some problems here & there. Its just part and parcel of the PC package. And although I don't expect Macs to be 100% perfect 100% of the time, I certainly expect better than this diabolical shambles that is the new iMac.
    Just as an example.. My 4 year old G4 powerbook.. Not 100% problem free, granted. But mighty close. However, it has not crashed once the entire time I have had it. My new iMac however, crashed 4 times yesterday alone, and it didn't even get used as much as my old powerbook.
    Maybe now you get the picture a little better?
    Just my 2 kernel panics worth...

Maybe you are looking for

  • Save and refresh after entering data inoto table ( update)

    hello guys, im using abap webdynpro now. and im facing a problem with the saving and update " refresh function" I have entry table and some other text input. the thing im doing is to enter data in the filed, attachment, drop down selection. then the

  • I take back anything I ever said about the Creative support being go

    All the emails you get back from them do is lead you in circles or give you answers to completely different problems. Stupid automated things. My mediasource/other creative software is painfully slow, but transfers are fast in wmp and yahoo so I know

  • Screen is magnified and cannot control it to sign in

    Screen is "stuck" in VERY  large print, cannot move it around enough to sign in.  Off and on does not help or fix...Has happened once before but don't remember how I fixed it if I in fact did it myself or it just decided to work right...

  • About file and directoty

    How to get the application's current directory? system.getProperty("usr.dir") return "/root", It is not the directoty that the .class file be included. How can I get the directoty that the .class file be included?

  • No sound from speakers after 10.4.4 update

    After doing all the latest updates I'm not getting any sound from the speakers on my powerbook. I can stream music, or listen to sound on my headphones, but not from the speakers. Any ideas?