New iMac can't find photosmart 2610 over network -- HELP

Just got a new iMac 24" 2.8gig with Leopard. Most of the setup went fine, but the computer steadfastly refuses to see my printer over the wireless network. It is an HP Photosmart 2610.
I have used the same printer wirelessly with a MacBook Pro with no problem -- it found it right away, though that was with Tiger (it still worked after it was upgraded to Leopard). It also works great with 3 Windows WP PC's, two wirelessly and one via ethernet.
My Router is a Cisco 800 series and I use a Cisco WAP. The iMac had no problem connecting to the WAP and Internet.
The core problem is the iMac doesn't acknowledge that the printer exists. It doesn't find it automatically and when I direct it to the correct IP is still doesn't find it. Also, Leopard doesn't seem to have the driver for it. When I search for drivers from the pull-down after entering the IP I get a bizillion HP options including many Photosmart's. But the lowest model # without a letter in front of it is the 3300.
I then tried downloading the dirver from HP. It said it installed successfully but still didn't show the driver from the pull-down. When I tried used "other" and directing it straight to the driver it would act like nothing happened and come back to the same pull-down without the 2610 as a choice. I also tried installing HP's entire all-in-one software suite for 10.5. It installed sucessfully but also doesn't see the printer.
I tried temporarily moving the iMac and connecting it to the 2610 via USB. It suddenly found it no problem -- both the iMac software and the HP software. And it worked fine... The moment it was back via network, it doesn't find it despite it still working fine from every other device in the household.
Not sure what there is left to try. It is not an option to permanently have it connected by USB. I spoke with HP and they say that because it works from every other device. They say it is an Apple issue. Apple says it must be an HP driver issue points me back to HP. So I am left in limbo with no functional printing capacity.
I've tried searching the Internet for any reports on this but can't find them. Others seem to be successfully using the 2610, though it is unclear if others were using it via the Network.
Any help is greatly appreciated. I am beginning to wonder if HP ceased supporting the network functionality in their 10.5 driver update but I can't get an answer on this.
Thanks.

To be specific, since the Apple Printers and Faxes function does not find it in the "Default" list, I select "IP" and then enter the valid IP address that I know to be for the printer. I have tested it multiple times from other devices to confirm the IP address and even printed a network diagnostics page from the printer to confirm it. I even had someone else review it for typos just to cross every base...
It then accepts it as a "valid" IP address and assigns it a "Generic Postscript Printer." I then chose the pull down for "other" drivers. I just checked again. There is no driver called "HP IP". There are hundreds of HP drivers those. I am looking for the HP Photosmart 2600 series. But the lowest series they list is the HP Photosmart 3100 series.
Again, I have covered all the bases I can think of. The Apple site lists the 2600 series as an included driver in Leopard but it isn't showing up. The HP site lists the 2610 as "Leopard ready." I have downloaded and run the OX 10.5 HP 2600 series driver executable from HP and it says it was successful (tried several times). I also downloaded and installed the entire stupid 400-and-something MB software "all-in-one" software suite for the 2600 series from HP. You can run its own setup program indpependent of the Apple one and it doesn't find it either. When you enter the IP is says it found no printer and refuses to continue the setup. I have turned the printer on and off many times and checked all the connections. I have confirmed that the other PC's in the household are in fact seeing it at that IP...
I have spoken with Apple Tech Support ("it must be an HP driver issue, sorry") and HP tech support ("it must be a problem with your Mac because it works for others... but perhaps we can sell you a new printer that should work better" (no kidding, they actually tried to do this!).
On principle (and practical) grouns I am reluncant to get a new printer when the one I have works perfectly well for everything accept this Mac. But I am totally out of options unless someone can help.

Similar Messages

New iMac can't find the old iMac via Ethernet

I just bought a new 27" iMac and I am trying to migrate data from my old iMac.
I have the two machines hooked together via Ethernet and have Etherenet turned on in the source iMac but the new iMac can't find the old iMac. The pinwheel keeps spinning with no success. What should I do here?

Gramps wrote:
What FireWire?
There is no FireWire port on the new machine so this is a non-starter.
Unfortunately you didn't read my post very thoroughly. You are correct, the new iMacs do not include FW however your old Mac probably does. For just that reason and more Apple makes a Thunderbolt to Firewire adapter which you can use if you opt to use FW Target Disk Mode. You can find the adapter by going to your Apple online store or Amazon carries it to. Here is the Amazon link:
http://www.amazon.com/Apple-Thunderbolt-to-FireWire-Adapter/dp/B008RXYOKY/ref=sr _1_1?ie=UTF8&qid=1366831510&sr=8-1&keywords=thunderbolt+to+firewire+cable
However as I mentioned use TM or a bootable clone with Migration Assistant. If your old Mac was using any verison of OS X from Leopard (10.5.x) on at the very least you should have a Time Machine backup!
Also use Pondiini's guide as AnaMusic suggests, it's THE GUIDE for using Migration Assistant and Setup Assistant. He has also created excellent guides for Time Machine too.

New iMac can't find OSX when firewired to G3 flatscreen iMac with 10.3.9

I just purchased a new iMac with Leopard, and I have an old flatscreen g3 imac running 10.3.9. I started up the new computer, plugged in the firewire cable, held t on th old comp, the symbol popped up, but then the new computer says It can't work w/out osx, and that osx isn't installed on the old mac, even though it is... I need to firewire sync.. how?

No no... I fixed it now. I was trying to get the old data from the old comp to the new one... It worked on the fifth try.

Single account on imac can see but cannot connect over network

This one is driving me crazy:
As of this morning I cannot connect to other computers in our network. Using other accounts on the same imac is no problem, but mine simply refuses.
I can see the rest of the network, connect to the internet, print, etc., but if I try to actually connect to another machine I get the error that it cannot find the original item (the error is in Dutch so I cannot give the litteral version)
Network, firewall and sharing settings seem to be the same as the other, working, accounts as far as I can tell.

OK, we found the problem. my permissions were screwed up...

IMAC can't find N network with TC firmware 7.4.1 and 7.4.2

Hello, I have a problem since I upgraded my TC from 7.3.2 to 7.4.1 and 7.4.2.
both my two IMACs can't find the TC N network, only if I downgrade to 7.3.2 they actually find and connect to the TC N network.
please let me know if the only solution is not to upgrade the firmware.
thanks
Fabrizio

Same here: 7.1.1 works but 7.2.1 & 7.3.1 do not with the same symptoms.
In fact there are now several threads reporting the same loss of internet connectivity. Happily reverting to 7.1.1 restores connectivity.

IMac can't find network printers

We have 4 Macs in the office and a bank of 4 printers all of which have been working great and connecting together for a while with no issues. However in the last few days the iMac can't find 2 of the printers. We tried to reload them through Print and Scan preferences but they didn't appear in the preferences. Checked all the cabling and hub and everything seems OK. Booted the iMac in Safe Mode and it could see them both straight away, rebooted the iMac and again they did not appear in the list, Tried to share one of the printers from a MacPro and it appeared in the list however sometimes it just won't print to it, it seems to print but nothing appears at the printer. Since then we have reinstalled Mavericks, Verified and Repaired Permissions, Verified the HD, reset the PRAM, all to no avail.
Apart from that the iMac prints to the other printers on the network without any problem and connects to the other Macs with no problems as well. We're using 10.9.4 on a 2.7GHz iMac with 8GB of memory. The other Macs can all see and print to all the printers. We are using a wired ethernet connection, not wireless.
Has anyone any suggestions as to the problem as it's becoming really annoying now.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Buying a new iMac - can you use an external SSD drive as boot drive?

Here is the question: Can you attach an external SSD and use that as your boot drive accompanying an iMac? This way all the Apple warranties stay valid but I am not saddled with the expense of the Apple installed SSD price?
Now for some background ...
I am looking to buy a new iMac replacing my loved but woefully underpowered Mac Mini. In a perfect world I would like the following set-up based on how today's iMacs can be configured:
Processor: 3.4GHz Quad-Core Intel Core i7
Memory: 16GB 1333MHz DDR3 SDRAM - 4x4GB
Hard Drive: 1TB Serial ATA Drive + 256GB Solid State Drive
Graphics: AMD Radeon HD 6970M 2GB GDDR5
Optical Drive: 8x double-layer SuperDrive
The problem is I'd rather not spend $3200+. I would imagine most people plug something similar in and then begin to ID must vs. nice to haves. So, here are my must haves:
Memory: Minimum 16GB 1333MHz DDR3 SDRAM - 4x4GB (I was thinking of starting with minimum and then purchase the right RAM and installing myself)
Graphics: AMD Radeon HD 1GB
Hard Drive: 256GB Solid State Drive
I like to work the graphics side and have a media library of almost 1TB (uploading, downloading, converting, editing, etc.). With my existing setup I have 3+TB of external storage but again, am suffering massively in the horsepower department as it takes hours for me to do what I believe a new iMac can help me accomplish in a fraction of that time. This is not my profession so while I looked at the towers I still need this computer to serve as a family computer as well. Appreciate your thoughts and feedback.
Cheers,
-Jim

Ok this is great as we are progressing through.
So yes it can be done but there's the caveat of the "pipes" once you go external. The only option for an external SSD Drive with thunderbolt that I know of is LaCie's 240 GB version ... Priced at $800.
I think what I will need to do is suck it up. The new MacBooks have the core technology I'd like but we really want the larger screen.
Last question - should I wait/when might we expect an updated line of iMacs? In a few months or not for a while? That answer may provide some direction if it is anticipated to be sooner vs later.
Thank you!

I have brought a new iMac, can i plug my iPhone and iPod into it without losing everything ??

I have brought a new iMac, can i plug my iPhone and iPod into it without losing everything ??

Your phone is in recovery mode. All data on it are already lost. You must connect your phone to your computer and restore through iTunes.

On iMac can't find scanner, how can I add it to finder or dock?

On iMac can't find scanner, how can I add it to finder or dock?
20-inch, Mid 2007,
Processor 2 GHz Intel Core 2 Duo
OS X 10.9.2 (13C1021)
and
HP C5280 All-in-One printer/scanner
Any advice appreciated
D

Thank you rk. The usefulness of image capture had somehow pased me by. To answer my own second question in case anyone needs to know, to put your printer in the dock you open printer & scanner in preferences, highlight your printer and drag its icon to the dock (in chains if necesary!)

Imac can´t find TC after upgrade

I have tried to upgrade my TC from 7.3.2 to both 7.4.1 and 7.4.2. On both the upgrades my imac can´t find TC via airport, and are not able to connect to Internet. Works OK with Ethernet cable though. My daughters macbook does not have the same issue, and has no problem finding TC after upgrade. I use this to downgrade to 7.3.2 after trying every possible option in system settings. On version 7.3.2 everything works perfect.
Some additional information:
I also have to airport express agents connected to the TC (one for airtunes and one to my printer). I also have an Apple TV connected. All are older models and does only work on the g standard. upgrading I have also had some issues with one of my airport express agents and my Apple TV.
My imac is placed almost beside the TC so there is no signal problem.
Anyone has a clue? or am I doomed to stay on version 7.3.2 forever?

Apple issued airport update. Issue seems to be solved.

IMac Can't Find External HD

I have been having Time Machine backup to an external HD which is connected via a Firewire line for some time now. The last backup was 5 hours ago. When I went to back up, it said there was no backup disk, even though it's been connected the whole time. Now the iMac can't even find the disk and it's still connected. What do I do? I have already restarted, shut down and restarted, unplugged both the external HD and the iMac, then restarted, checked all the wires, and unplugged and plugged the external HD several times. I don't understand why the iMac can't find it. Also, when I now click "Select Backup Disk" it takes me to the Airport to find wireless disks and this is not wireless. Help!

This forum is dedicated to the productivity application, AppleWorks. It is not a "catch-all" for how Apple computers work. For those type of questions the best places to start are the forums for your version of the Mac OS or your model of Mac. For you I suggest the Time Machine forum in the Category: Mac OS X v10.6 Snow Leopard.

After two hours working my iMac can't find HD

After two hours working my iMac can't find HD.
If I will try to start the iMac again, it starts showing only a white screen.
I have done all the things that apple says except format to solve the problem.
The problem stops only if I leave the computer for a while without working.
The Hardware Test finds nothing and Verify Disk says that HD seems to be OK.

If the problem with white screen apears the computer can't start even in safe mode.
Yesterday, I tryed to format HD but I couldn't because the system could not find HD. Disk Utility from Installation Disk could not find either HD.
I closed it and after 30 minutes I tried once again to open it.
The computer started without any problem like magic and all worked perfectly.
Then, my first job was to verify disk and showed that everything was OK.
Then I restarted the iMac and same problem started again...

I opened Firefox accidentally so pressed cancel but it opened it anyway but didn't restore my last session (which I needed) and can't find how to restore it - help!!!

I opened Firefox accidentally so pressed cancel thinking it wouldn't open Firefox if I did that but it opened it up anyway but didn't restore my last session (which I needed) and now I can't find how to restore it - help!!!
== This happened ==
Just once or twice
== I opened Firefox accidentally and clicked cancel thinking it wouldn't open Firefox if I did that.

You will find that bookmarking a page (clicking the star next to the address, or going into ''Bookmarks > Bookmark this page'' is precisely what you need to remember pages. It is a very widespread function in web browsers, and it is very ''very'' helpful in many situations, including remembering the location of pages you want to see later, providing easy access to pages you use frequently and other stuff too.
If you want to know about session restore, there's an helpful support article [http://support.mozilla.com/en-US/kb/Session+Restore here] which I believe also has information on version 3.0. However, I do urge you, once again, to update, because older versions (including 3.0) are no longer maintained and have known security vulnerabilities. Besides, you will not loose any functionality at all (unless you are using add-ons that are no longer usable by newer versions, in which case you need to contact the add-ons' authors for support and ask them to update their software), it's free, and very easy to do.
If you need any further help at all, whatever it is, tips, troubleshooting, walkthroughs, feel free to ask here.

I can't find the device with the help

I can't find the device with the help https://myxperia.sonymobile.com/
I want it to tie to the new mailbox

You can try google device manager instead.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

My mom put my ipod 5th gen in the house somewhere and it was turned off. It is connected to the internet in the house. How do i turn it on with the Findmyiphone or something else? It was an expensive gift and we can't find it now! Please help!

My mom put my ipod 5th gen in the house somewhere and it was turned off. It is connected to the internet in the house. How do i turn it on with the Findmyiphone or something else? It was an expensive gift and we can't find it now! Please help! How do i turn it on without finding it because she can't remember where it was.

That is so dumb...Apple is the best and most techinological company IN THE WORLD and they don't have the time to invent something like that? HUH? All they are worried about is making the "Worlds best Phone" and they can't take the time out to help their users or anybody that has their products. All they have is "Find mt Iphone" Well they should step up and do something else to help people like me out. Find a way to turn it on and you can find it or find a way to turn it on remotely.
Thank you for your replys

New iMac can't find photosmart 2610 over network -- HELP

Similar Messages

Maybe you are looking for