New imac g5, told to reinstall OS, gets to 2nd disk and says PROBLEM DURING

INSTALL!
This is frustrating, brand new out of the box APPLE , which I am a new MAC user and wanted t get away from the Dell! NITEMARE already
help please
thanks
Kelli

Who told you to reinstall OS X? I would call applecare back and tell them it's not working. It sounds like your mac is DOA.

Similar Messages

For a new imac how much ram should i get?

If I buy a new iMac, I see that one can get it with 16GB or even 32GB RAM. dMy 2007 iMac has 4 GB now after I upgraded? What would the difference be?

My 10 cents worth:
The minimum configurable amount of memory of a new iMac is 8Gb But...
If you are looking at a new upgradable iMac, absolute do NOT buy the Apple RAM upgrades at the time of purchase. It is grossly overpriced, and although good quality and reliable (I've been led to believe) you can buy just as good, if not better for a lot less. I wouldn't look further than OWC (http://eshop.macsales.com/shop/apple/memory/) or Crucial (http://www.crucial.com/). Both offer matched pairs and kits that are guaranteed to work with your iMac and as you will see, cost a lot less than Apple. Don't be fooled by the price, they supply good quality, fast memory.
Secondly, in terms of how much RAM, the question is, what is your budget? I always believe that if you can afford it (and memory nowadays isn't that expensive) max out your system and then forget about it because:
a) There's a fair chance that you'll be upgrading it again at some point if you don't max it out.
b) You are releasing the maximum potential of your iMac (in terms of memory performance, although the jump from 16Gb to 32Gb will not be as significant as the jump from 8Gb to 16Gb))
c) If you sell it, the extra RAM will be an attractive option for any buyer.

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help says File >Library >Export playlist and choose XML, or to save a copy of all your playlists, File > Library > Export Library, "the Exported info is saved in XML format." Then it says, "to import an iTunes playlist, File > Library > Import Playlist". Now I am assuming I do that import part on the Air, but when I try it doesn't recognize anything that can be imported - what am I missing??? Aside from a clue...

Thanks, Jim, for taking the time, but the reply is unfortunately vague in the exact area of my confusion! "you need to copy that file to your new computer..." Well, the Import/Export instructions make it seem as if the two computers should be able to communicate this file thru wifi, but that's the linkage I can't seem tocreate with Import/Export. Should I instead email a copy to myself (thats what applecare suggested)? Copy it to and from a thumb drive? But then place the file where? And the article was helpful, but should I be trying to move the Library file or the Library.xml file (as iTunes Help suggests)? Sorry to be so clueless about it...I suppose I buy Apple in the hopes of not having to think about this stuff, which approach seems not to be serving me well. Thanks again for your time!

Lost my iTunes movies on old hard drive crash, now have new iMac...how do i get them back?

My old pc hard drive died and decided to get a new IMAC...im able to get all my music, shows, etc but how do I get my movies I purchased on Itunes?
Thanks

Restore them from your backup. It is not possible to re-download purchased movies from the iTunes Store.

HT4889 Hi there, I just get a new Imac, so, I would like to syncronize with my macbook, and keep the same musik, apps, files. what can I do to do that? Thanks

Hi there, I just get a new Imac, so, I would like to syncronize with my macbook, and keep the same musik, apps, files. what can I do to do that? Thanks

Hello there, LeoFerrer.
The following Knowledge Base article provides some great information and steps for migrating your information to your new iMac:
OS X: How to migrate data from another Mac using Mavericks
http://support.apple.com/kb/HT5872
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I cant get my new iMac to talk to my Cannon mf4350d. Some chat sites say they never will. My latest error message is: "No destinations have been added to the [Destinations List]" I cannot find this reference in Help...

I cant get my new iMac to talk to my Cannon mf4350d. Some chat sites say they never will. My latest error message is: "No destinations have been added to the [Destinations List]" I cannot find this reference in Help...

I cant get my new iMac to talk to my Cannon mf4350d. Some chat sites say they never will. My latest error message is: "No destinations have been added to the [Destinations List]" I cannot find this reference in Help...

Has anyone had any luck returning there iMac w/ Lion? I couldn't even reconnect back to the iternet tonight w/o restarting my new iMac.... Looks like folks have been having this problem for months

Has anyone had any luck returning their iMac w/ Lion? I couldn't even reconnect back to the iternet tonight w/o restarting my new iMac.... Looks like folks have been having this problem for months & months .. The Apple tech told me that all I could do is wait for Apple to come up with a fix... Got a new router this week so that isnt' it. Would I be better off w/o this until Apple gets their act together? I downloaded the combo update 10.7.3 & it helped for about a day... yesterday I still had to manually reset the connection but now it's resorting back to disconnectiong w/o fully going into sleep mode first. Sorry to say this is a major lemon. Help!

Seems unfair... I thought I was probalby having a router problem... got a new router this week. Thst's when we realized we have a computer problem. My next door nieghbor got zero sleep staying up all night while trying to help us figure out what the problem could be. He said if it were him he would have returned the iMac / Lion. Got the new iMac w/ Lion for Christmas but didn't realize until this week that Apple is the problem.... Hard to believe that Apple just has kept on selling this like ... oh No problem! Can't stay on the internet... but will sell you another one today! I'm getting mad... It's not every day we spend that kind of money on a computer . & ALL they can give us is that LOUSY Lion combo update. I can't even stay connected long enough to make a vitamin order with Puritan's Pride... & then the disconnection wipes out my cart... so I have to start over. When are they going to fix this! 'Not feeling very positive'. I feel like Apple KNOWINGLY sold my husband a defective... system. 14 days... oh please...

I am wondering what is the best way to merge a very large iphoto library (from my MBP) to my new iMac (which has a few hundred photos on it now), and then upgrade to Aperture?

I have about 50GB of photos on my old MBP iphoto library.
I have a new iMac with a few hundred photos that I've uploaded since I bought it last December.
The iMac is where I want to keep everything stored as my main photo library, and manage it with a new Aperture installation.
Before I go and do this, and possibly muck it all up,
I would like to figure out the proper steps.
I am not too familiar with how to transfer files in the first place, so any help for a beginner would be much appreciated.
Starting from how to safely move the files from the MBP to the iMac, if anyone could walk me through this process.
I've been searching around but I have a specific goal (with getting everything into Aperture) so I don't want to get crossed up.
Thanks for your help!!

I have about 50GB of photos on my old MBP iphoto library.
To be able to merge your libraries, your Aperture version and iPhoto version must match. For basic reading see: Aperture 3.3: Using a unified photo library with iPhoto and Aperture
and Aperture 3.3: How to use Aperture to merge iPhoto libraries
Assuming you are running the latest Aperture and iPhoto versions:
Before merging libraries ensure that your iPhoto Library has no issues. While still on your old mac run the "library first aid tools" on your iPhoto Library. Hold down the key combination ⌥⌘ and double click your iPhoto Library, then select "Repair database".
Make sure you have a backup of your current Aperture Library and iPhoto library.
Do both macs have a FireWire port? Then you could connect your macs in Target Disk Mode:
See OS X Lion: Transfer files between two computers using target disk mode
This way your new mac could see your old mac as an external disk and you could copy directly between the macs.
Otherwise copy your iPhoto library by drag-and-drop to an external disk (on your old mac) and connect that disk to your new mac. Check, if the external drive is formatted for mac (MacOS X Extended (Journaled)). Otherwise reformat it, before you copy the iPhoto library to that drive.
When your iPhoto Library has been moved to your new Mac launch Aperture and use the command "File > Import > Library" from the main menu bar. If there are duplicates in the Aperture library (if you imported earlier from iPhoto) you may be prompted if you want to "Add" or "Merge". If you have lots of duplicates, pick "Merge", otherwise "Add".
Post back, if you need more detailed instructions.
Good Luck.
Léonie

I uninstalled logic because it kept crashing. But when i try to reinstall it get to the 3rd disk and says it couldn't be installed. Does anyone know of any reasons this might be?

I uninstalled logic because it kept crashing. But when i try to reinstall it get to the 3rd disk and says it couldn't be installed. Does anyone know of any reasons this might be?

Ben Rush
Also tried restoring system from backup but just does the same thing
This is where a HD clone is so important, ...
Time Machine can do nothing with/to a crashed / failing HD.
Like refilling a gumball machine with a hole in the bottom, ....futile.
At least your vital data is backed up. Look into getting a new internal HD. Very cheap fix $65 for a new HD.
If you have Apple care on your 2011 macbook, contact them for repair/ HD replacement.

I plugged in my brand new nano to my husbands desktop to get it registered, but had a problem mid way through when I tried to used an apple login that already existed. Now it's not registered and the computer won't recognize my device. How do I fix this

I plugged in my brand new nano to my husbands desktop to get it registered, but had a problem mid way through when I tried to used an apple login that already existed. Now it's not registered and the computer won't recognize my device. How do I fix this?

iPod not recognized in 'My Computer' and in iTunes for Windows
Call U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273) to register your iPod Nano.

How to connect new iMac to tv with a hdmi cord on one end and a thunderbolt on the other end

how to connect new iMac to tv with a hdmi cord on one end and a thunderbolt on the other end

You need a > Moshi Mini DP to HDMI Adapter with Audio Support - Apple Store (U.S.) to plug into the ThunderBolt port and an HDMI cable.

Can I hook up my PowerMacG4 (OS 10.3) to my new iMac so it sees it as a seperate hard drive and lets me open and use files in 10.3 when I access that computer?

Hi,
I am buying a new iMac and want to hook up my old PowerMac G4 (OS 10.3) so that the iMac sees it as a separate hard drive and I am able to access programs and files from the G4. I am still working on a project on my G4, using Adobe CS2, and would like to continue to work on it using my new iMac so I don't have to keep switching back and forth between computers. My G4 has an additional old hard drive in it that runs OS 9.8 and programs related to it, so I'd like the same configuration for my new iMac, if it's possible.

If your G4 has a Firewire port then you can connect it to your new Mac with a Firewire cable - 6 pin to 9 pin cable. You will need a Thunderbolt to Firewire adaptor for the new computer. You would useTarget Disk Mode by booting the G4 into TDM and the new computer normally. If it works then the drive in the G4 will appear on the new computer's Desktop.

-1007f cannot get the Mac book air to reinstall, no drive. For disk and no connection

-1007f cannot get the Mac book air to reinstall, no drive. For disk and no connection please help!!

You can download the product from this link:
<Download Photoshop Elements products | 13, 12, 11, 10>
Your redemption code/Serial number will work with these downloaded products.
Make sure you download the correct version for your operating system - Windows or Apple MAC
Good luck.

I have a Powerbook G4, an iPhone 4 and a new Macbook Pro. How do I get my iTunes library and apps from iPhone over to the new Macbook pro without losing anything?

I have a Powerbook G4, an iPhone 4 and a new Macbook Pro. How do I get my iTunes library and apps from iPhone over to the new Macbook pro without losing anything?

http://support.apple.com/kb/HT4527?viewlocale=en_US&locale=en_US

I have got a new imac - set up my mail to access my hotmail account and i have logged on today and can't find mail any where - this is my first mac !!

I have got a new imac - set up my mail to access my hotmail account and i have logged on today and can't find MY mail ICON any where - this is my first mac !!

Hello
Have you checked the applications folder?
To quickly find it on the top right press the spotlight button it looks like that image
and type in Mail it should appear in the spotlight list, click it to launch mail or alternatively right click it and press open enclosing folder to find out where it has vanished too

New imac g5, told to reinstall OS, gets to 2nd disk and says PROBLEM DURING

Similar Messages

Maybe you are looking for