New iMac user, can you use a fan to cool the back?

Hi everone,
I'm a new iMac user, a new mac user full stop. I recently was given one for college because I'm dyslexic so I recived one to help with college work. I'm a P.C girl mostly so i'm very new to this system, but we do use these at college thou I avoided them like the plauge because I just didn't know how to use them.
ANYWAYS....I noticed that the back get's very hot, my desk is by the window of my room because it gets a little hot in my room at time's and I know my P.C would heat but so the window it was.
i was wondering if used an external fan behind the mac might help with the temp, nothing big just a small fan for the back of the computer like the one's you use in an office but allot smaller? is this a good idea or not?
thank you for takeing the time to read my post, I did read the other about hot mac's but it didn't have the answer I was looking for.
Cap'Pixie xox

Just be sure it's fixed low enough to be aimed upwards. That way it won't prevent the hot air escaping from the upper exhaust by blowing it back in. It will be blowing dust around too, so keep the area as dust free as possible. Whether I need to run this fan depends on the intenal temps and how hot the back feels. But can aid considerably in cooling. Get iStat Pro.

Similar Messages

  • Can you use external hard drives with the HP Omni 10 5600US

    Since this a Windows tablet, can you use external hard drives with the HP Omni 10 5600US?
    I know there is a micro-sd reader for additional storage but can you use the usb for external hard drives like a regular pc?
    I tried looking at the spec's for this tablet and it said the usb port was host only. I'm not sure what that means exactly.

    Yes you can.  You'll need to purchase a USB OTG (on-the-go) cable.  I recommend using a drive that has its own power supply but I've successfully used small USB powered drives also.

  • HT1766 Can you use an external hard drive to back up my movies in iTunes but still be able to access them or is there a device so I don't have to use a pc ??

    Can you use an external hard drive to back up my movies in iTunes but still be able to access them or is there a device so I don't have to use a pc ??

    You can store them on a separate hard drive, you don't need to keep them on your laptop's hard drive. On your computer's iTunes on the Advanced tab in Edit > Preferences there is a 'copy files to iTunes media file when adding to library' tickbox - if you untick that, you should be able to copy the films to a separate drive and add them back to your iTunes library (File > Add To Library) and it should then point to them on that separate drive and not copy them to your hard drive. When you are happy that it is what is happening and that they are safely on your external drive you can delete the films from your laptop's hard drive.
    If you plug the external drive into a different USB port next time (assuming that your laptop has more than one) then it might get a different drive letter, so you might need to always use it with the same port.

  • HT2737 Can you use itunes gift cards in the stores to buy products

    Can you use itunes gift cards in the stores to buy products

    No, they can only be used in the iTunes store, app store, ibookstore and the Mac App Store - they can't be used in Apple stores (inlcuding the online Apple stores).

  • Can you use multiple email addresses on the owa app?

    Can you use multiple email addresses on the Microsoft OWA App?

    You can do it but there is a delay from the bluetooth speaker.  You'll need an iphone or ipad using the Apple app "Control", airplay setup, bluetooth speaker, and an Apple laptop or desktop. 
    I used my laptop to connect to my bluetooth speaker so that sound streams to my bluetooth device. Then, on my iphone I opened Control and connect the music to my airplay and my laptop at the same time.  The music goes to your airplay speaker, and then to my laptop which then blue tooths it to my speaker.  But, as I said the bluetooth takes an extra step to stream it and so the music is not in sync.  Its like a second and a half delay....

  • Can you use a US iPhone in the UK

    can you use a US iphon e in the UK

    You shouldn't have a problem, I would think it would work, as long as it's a GSM (AT&T) model. It should just be a matter of swaping out the SIM cards.

  • Can you use old droid chargers on the droid turbo

    can you use the old chargers say droid razr maxx to charge your turbo?

    The Droid Razr Maxx charger will charge your Turbo but at a somewhat reduced rate of charge and take a  much longer time period to reach full charge. The "Turbo Charger" gives an increase in voltage that it delivers to higher than a regular 5 volt USB charger. This allows for a faster charge rate and the battery has been made and tested for this faster/higher heating range to be safe.  
    http://industries.ul.com/blog/qualcomm-quick-charge-2-0
    https://www.qualcomm.com/info/analys...m-quick-charge

  • Have a new iMac.  can i use my old mini as an external cd/dvd drive?

    Just got my new imac and have discovered it is without a cd/dvd drive.  Since I have converted from a mac mini can I use the old mini as an external drive, and how do I do that if the response is yes?

    I use LaCie.
    My last cd/dvd burner was a LaCie, and it worked perfectly for three years before a bronze sculpture fell off a shelf and landed on it, putting a big dent right in the top of the metal case. I thought that would be the end, but it kept working perfectly, dent and all, for another two years before I finally replaced it.
    When my current drive needs to be replaced, that will be a LaCie, too. Same with their external hard drives. And no, I don't work for them.

  • Can you use 2 apple tvs on the same network with different apple ids and how would your devices know which apple tv to stream to?

    Hi,
    I was looking into purchasing 2 apple tvs and was wondering if they can be setup with different apple ids. I need to have mine setup with my id and be able to hook my devices to it , but have the one in a bedroom hooked to a different apple id and have my friend's devices stream to that one and not mine.  Is this possible?

    Welcome to the Apple Community.
    In order that your Apple TV only streamed from your iTunes Library and your friends to your friends, you would both have to have different homesharing ID's.
    So far as devices go, any device on a network can stream over AirPlay to an Apple TV, to ensure each of you couldn't stream to the others device you can enable a password via the Apple TV which would then need entering when you used a device for AirPlay.
    Shouldn't be a problem to do what you want to do.

  • Can you use an external antenna with the 4G LTE Router with Voice?

    I live in a black hole of cell service - very rural, in a valley surrounded by trees, no DSL, no cable, no other options except satellite internet which I did for 15 years and will never do again. My current data setup is a Pantech UML290 USB modem connected to a Cellphone-Mate full band outdoor Omni 3G/4G antenna on the roof. I just ordered an amplifier to boost the 4G LTE connection. The modem is plugged into a Cradlepoint MBR900 router, which then provides my home internet (way more than 10 devices, and mostly wired).
    Is there a way to add the antenna and amplifier setup to the broadband router with voice so I can be assured of the signal? If so, could I then use this router to feed the Cradlepoint and continue using multiple wired devices?
    I was set to order this router last night, but the CSR through chat told me that you cannot attach antenna to the router with voice - only to the one with data. This really doesn't make any sense to me, but she was firm about it. If I can attach, can I use the cables I have or will I need a different adapter?
    There is so little information about this particular router. My current setup is doing fairly well, but I would love the option to drop my landline and increase signal strength for both voice and data. With no antenna, the modem gets around -125 db, and can't connect at all. With the antenna mounted on the roof, and routed through the Cradlepoint, I consistently get -85 db. 4G LTE speeds are around 15-19 Mb/s down and very inconsistent 2.5-4.0 Mb/s up. However, the 4G drops and resets multiple times a day, so I usually sacrifice the speed to get a more stable 4.5-5 Mb/s down and 0.5 Mb/s up through forced 3G.
    Voice calls are spotty if received at all, and frequently drop immediately if there is any connection. And of course, the data limit has been a nightmare. I could potentially save some money by porting my landline to Verizon, but not if there is no way to boost the signals. The Omni antenna will boost all, but not sure if there's any way to route the existing antenna setup to feed both the voice and data sides, or if it would be enough to allow me to do this. This router also says it's 4G LTE only, but the specs on the antenna they sell say it boosts 3G for failover, so not sure if it will grab anything else. Any help or advice GREATLY appreciated! Thanks for reading through the whole thing.

    No, not directly. You would need to transfer your data from your iPad to your Mac and then back it up to an external drive.
    Pete

  • Can you use an iPhone 5 and the lightning to 30 pin adapter with the Scosche IPNRFCS wireless Car RF remote?

    I'd like to use this remote for my iphone 5 in my car to listen to music. The iphone will be plugged  into the stereo and be stowed away but I want a way to change the song because my stereo doesnt allow complete ipod control. Can i use the 30 pin adapter with this remote to hook the wireless adapter for the remote to the iphone? So i guess what im asking is does the lightning to 30 pin adapter support whatever kind of data is going between the iphone and wireless remote adapter?If not are there any good alternatives out there? Thanks!

    I am pretty sure that will not work.  Does your TV have HDMI?  You will need this:
    http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter?fnode=4 5&fs=m.iphoneCompatibility%3Diphone_5
    The adapter your purchased has this note :
    This adapter lets you connect devices with a Lightning connector to many of your 30-pin accessories.* Supports analog audio output, USB audio, as well as syncing and charging. Video output not supported.

  • Can you use a formula field as the default value of a parameter?

    I'm wondering if you can use a formula field as the default value of a parameter. I have an date parameter that is being pulled from a stored procedure. When I run the report, it defaults to the current date and time. I would like it to default to he current date and have the time be 00:00:00

    Hi,
    Unfortunately, you cannot use a formula field as the default value of the parameter.
    And, to get rid of the current time and show 00:00:00, all you need to do is Edit the parameter and set the 'Default Value' to 00:00:00. This will take care of the time portion, however the date portion would be set to the year 1899 and not the current date.
    Hope this helps!
    -Abhilash

  • Can you use Apple TV all around the world

    if I buy an Apple TV in Canada can I use it in Europe or Australia as well?

    Welcome to the Apple Community.
    If I understand correctly you want to use both the Apple TV's with one TV.
    There wouldn't be a problem with that, they will each need there own network connection and should be connected to different AV inputs on the TV so that you can switch between each Apple TV as a source with your TV remote.
    If you don't have two HDMI ports on the TV, the Apple TV 1 will connect by component cables, if this isn't possible you would need to get yourself an HDMI switch.

  • Can you use a VGA monitor on the Mac Pro model?

    I'm considering getting a new Mac Pro to replace my beloved PowerMac G4 MDD. I have a ViewSonic Graphics Series 19" CRT monitor (VGA) that I use as a palette monitor, with a 19" SyncMaster LED as my main monitor (DVI). My PowerMac's video card has both DVI and VGA ports.
    Will I be able to use my VGA monitor with the basic Mac Pro (MB871LL/A)? Will a DVI/VGA video port adapter work, and if so, will it work well? Thanks.

    I had two 19" Viewsonic WS monitors hooked up to my X1900XT on my MacPro and it worked just fine with the VGA/DVI adapters (I got the small 2" white adapters that don't have any "cord" in the middle. I swapped them out for two 22" WS Acer monitors and now use the DVI inputs and I am still happy.

  • Can you use itunes card to buy the os x lion from the apps store? and if yes how? thanks

    how can i use the itunes card to get os x lion from apps store

    See this Link for 
    Create an Account Without a Credit Card:
    http://support.apple.com/kb/HT2534
    Changing Account Information
    http://support.apple.com/kb/HT1918

Maybe you are looking for

  • Folder always opens when imac wakes from sleep

    Don't think its a huge problem but when new imac wakes from sleep the same folder always pops up on screen(shaded in black). It always has to be closed before I can proceed with anything.Any suggestions would be appreciated. Also the folders name is

  • What is the cause of the XPath error in concat expression

    Hi, In a BPEL process I am working on I am building a list as follows - <copy> <from expression="concat(bpws:getVariableData('FMSNumbersList'),' | ',bpws:getVariableData('Invoke_1_GetFmsHeadersSelect_OutputVariable','FmsWaveAssignCollection','/ns5:Fm

  • Where to find the SQL text in v$ views?

    Hi All, Oracle 11.2.0.3 on RedHat. I am trying to find out SQL activity on my database for a very narrow time window. Please see the SQLs I did SQL> select distinct user_id, sql_id   2  from v$active_session_history   3  where sample_time between to_

  • Grouping of requirements into Bid

    Hi, Our requirement is as follows, we have multiple requirements(External requirements) with same material and same delivery date to same delivery place, we need to create one bid invitation line for all the requirements. In the standard system it is

  • Material replication ECC-SRM, in wrong queue (outbound in SRM system)

    Hi, I'm working in SRM 5 integrating with multiple ECC systems. When attempt to replicate materials from one of the ECC systems, if I run the transaction R3AS for MATERIAL, the Monitor Load Transaction shows the object is "Running" indefintely. I che