New install no mouse or keyboard

Hi all -
I seem to be having an issue where I can get the nvidia X in the middle of the screen to display, But it doesn't respond to mouse or the keyboard like the instructions says it should.
What did I miss? Thanks for the help.

Well I did what you suggested and I get the same thing.
I see the nvidia x in the middle of the screen but no keyboard or mouse response.
I hit the <ctrl> <alt > del keys and I did see that the terminal said it "failed to load module kbd" , and "failed to load module mouse" or something along those lines... did I miss installing an important package?

Similar Messages

TS1569 Having properly fitted new batteries to mouse and keyboard (wifi), the green led on both devices flash, however they do not match. What do I do? ( both were working perfectly until batteries needed replacing) Batteries replaced now they do not co

Having properly fitted new batteries to mouse and keyboard (wifi) and switched both devices on they do not match to either my computer or each other ( or both). I have had computer a couple of years and changed batteries before, this is the first time this has happened. Because the mouse does not connect, I cannot operate the computer. Any clues will be great fully received.

You are most welcome!
Sometimes a SMC reset fixes odd problems.
Barry

Wireless mouse and keyboard lag. running no programs.

hello. im having issues with my brand new Microsoft 2000 mouse and keyboard. iam running a brand new week old hp pavilion desktop computer with windows 8.1. i have tried updating drivers and ive tried unplugging and plugging the receiver back in and nothing
seems to help. i have performed multiple scans of my computer with my anti virus and there is no infections detected. The computer had this problem right out of the box.

Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.)
who post their question in this forum in error, but please don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks, Mike
MSDN and TechNet Subscriptions Support <br/> Read the Subscriptions <a href="http://blogs.msdn.com/msdnsubscriptions">Blog! </a>

Connecting wireless mouse and keyboard on Pavilion 23 with microsoft 8.1.

This is a new computer and mouse and keyboard were working for a few days. The batteries are brand new in each devise.
The touch screen is operatioal. The mouse and keybourd came with the hp computer.

Hello Consolidated,
I understand that you are experiencing an issue getting your wireless keyboard and mouse to work on your HP Pavilion 23 running Windows 8.1. I am providing you with an HP Support document: Wireless Keyboard and Mouse Troubleshooting, which will walk you through the troubleshooting steps specific to resolving wireless keyboard and mouse issues. Also, do not fret over the fact that the top operating system is Windows 8 in this document the steps for Windows 8 is the exact same as Windows 8.1.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Just installed XP and Drivers, Now no mouse or keyboard

Alright, so I just installed Windows XP through Boot Camp and had everything running on my new iMac. As labeled in the instructions, I popped in the driver install CD after I had XP installed (at this point, the bluetooth keyboard and mouse were both working). The wizard came up and the drivers installed themselves. Everything looked all fine until the setup "ended" with an error message that I didn't get to read, because less than a second later, the computer restarted itself.
When XP came back up, I could tell that the video and sound drivers were installed because I heard the startup sound and the resolution was adjusted. BUT, the mouse and keyboard stopped working totally! I tried plugging in another wired USB mouse and keyboard, but the computer didn't detect them either.
What should I try? Just reinstall the whole thing?
Thanks in advance!

No problem!
- Right after I installed Windows XP (a clean install with no other data, of course), I popped in the driver install CD.
- When the installer comes up, close it - we won't be needing that.
- Open My Computer from the Start Menu and find the disc corresponding to the optical drive (Titled "Boot Camp"). Right click on it and select "Open", not "AutoRun". The disc's contents should appear.
- From there, open the folder named "Boot Camp", and then open up "Drivers". In the "Drivers" folder, you'll find a whole bunch of folders that contain all of the drivers for all of the hardware on your Mac.
- You're going to need to manually install all of the drivers EXCEPT the ones pertaining to 'USB' or 'Bluetooth'. Open each folder (better to do them in order), and find the drivers you need to install. It may look overwhelming trying to figure out which ones you need, but it's more simple than you might think. Essentially, each folder contains all of the drivers you need, but there are several versions of them for the different versions of Windows (XP, Vista 32, Vista 64, Win 64, Win 32, etc etc etc...) Figure out which version you have (most likely 32-Bit Windows XP) and install every driver that says anything among the lines of 'Win32' or 'XP' or 'XP32' (you get the idea) (again, avoiding the ones that have to do with Bluetooth or USB).
TIP: The driver installer windows seem to pop up behind the window that you're currently using. Select them from the taskbar.
TIP 2: Some drivers may summon a "Install New Hardware Wizard" window. Just don't touch those. Don't. Touch. They will go away on their own when the device is installed. I promise.
ANOTHER TIP: When you get to the graphics cards installer folders (Either ATI or nVidia), you only need to install the ones for the graphics card that's in your computer!
YET ANOTHER TIP: Don't forget the lingering "MotorolaSetup.exe" installer in the drivers folder!
Hope this helps! If you need any clarification, please ask!
PS: All of the above is why OS X is awesome. Just sayin'.

No USB mouse or keyboard installing Win7

No mouse or keyboard when installing Windows 7 Pro in new K450e.
PC boots to Win7Pro media.
No USB mouse. Lazer light not on.
USB keyboard not responsive.
BIOS set to Legacy.
Found no mouse /keyboard setting in BIOS.
USB enabled in BIOS.
What is the issue?
hime

After installing Windows 7 did you also install the Chipset Driver, Intel ME Driver, Keyboard and Mouse Driver and the USB 3 Driver? If you didn't then that would account for the various hardware items not being recognized. Always install the Intel Drivers first and then the rest.
The link below is for the available drivers from Lenovo for your model. Just select your operating system in the top box for the correct driver listing.......
https://support.lenovo.com/us/en/products/desktops-and-all-in-ones/ideacentre-k-series-desktops/leno...
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Wireless Mouse and Keyboard Install Problem

I am trying to install my wireless keyboard and mouse onto my Mac OS X 10.3.9. My dad had this computer before me and had the mouse and keyboard paired and working. After it was shipped to me, I attempted to pair these again with no luck. THe bluetooth won't recognize either and if i try and run the KeyboardandMouse.pkg as instructed, the icon simply isn't there when I insert the disk. I've attempted to pair using the system preferences, but it cannot locate either the keyboard and mouse. Yes, I do have new batteries installed and the lights do blink when switched on. Any help is appreciated. Thanks.

Hello again:
Try trashing the BT preference file (com.apple.bluetooth.plist) and restarting.
If that does not work (although it will take you a bit of time), I think I would try an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
Barry

How to fix the mouse and keyboard freezing when installing Windows 7 on 27' iMac late 2013?

Hi, I have a question for u guys who can solve this.
I recently bought the new 27' iMac late 2013, and I installed some softwares and used it for few days.
Before I bought this I used the 15' Macbook Pro Retina, I installed Windows 7 Home Premium 64 bit, and I used the Windows for gaming.
So back to my question.
So I bought the new iMac and I was tying to install Windows 7 Home Premium 64 bit (with the same CD).
After dividing the partition, and other stuff, the iMac rebooted and I hold down the option (alt) key. I choose the Windows CD, and it said it is "getting ready to install Windows". I let it load, and the blue screen where you choose the language, time/location and keyboard input popped up. At the bottom right corner (at the same page), there is a button that said "Next (N)" which u need to click it to go to the next step. I was moving my mouse to click the button, but I realized that my mouse and keyboard was frozen. I tried both wireless and wired mouse and keyboard but they didn't work. There was nothing I could do. I hold the power button, (that was the only option) and tried my mouse and keyboard on Mac OS and it worked fine.
I thought something went wrong in the CD so I bought the Windows 7 Ultimate 64 bit. The result was same. It frizzed again. (I just wast few hundred $)
Latter my friend lend me his Windows 8.1 Pro 64 bit. I tried it, and it worked, it didn't freezed on Windows 8.
The problem is I played Battlefield 4, Titan fall, and Watch Dogs, and Battlefield 4 multiplayer doesn't work on Windows 8.1. Even though when it works on Windows 8, I prefer using Windows 7.
Dose anyone knows how to fix this freezing thing?
My computer is:
27' iMac late 2013 (bought it just few days ago)
I did no upgrades when I bought it, except the graphic card.
I bought the iMac in Korean Apple Store, and my Windows CD is in Korean, can that be a problem?
Please leave a comment when u think u can solve my problem.

See -> http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf.
In addition to the Windows disc (or USB flash drive with the Windows installer) you'll need a 8GB+ flash drive.
The referenced manual - on page 3, I think, gives you a run-down of what you'll need before you begin the installation. You may also want to post any further Boot Camp questions in the Boot Camp forum -> https://discussions.apple.com/community/windows_software/boot_camp.
Good luck,
Clinton

New wireless mouse and keyboard issues

I have a new 20", 2.4GHz alu iMac, and I ordered it with the new bluetooth keyboard, and bluetooth mighty mouse. They've always worked great, but yesterday, the mouse has had intermittant lag, and it says that the keyboard has lost connection. I've been running Leopard since it came out, and I've never had such problems with Tiger. I reinstalled Leopard a few hours ago (erase and install), and I'm still getting the lag. I wanted to see whether it is my mouse, so I tried pairing it with my brother's white intel iMac, and it couldn't pair, but it made my brother's bluetooth mighty mouse lag too! Could this be due to interference? Our rooms are right beside each other.
Also, when the lag occurs, I get the message that its lost connection with the keyboard, however it still works perfectly. The lag is very noticeable, and it takes about 3-4 times longer for the mouse to move, while being very choppy. This is for about 10-15 seconds, and then it goes normal speed again.
Is anyone else having this challenge? Could anyone diagnose whether it's likely to be the computer, the mouse, or interference, (or other!)?
Any feedback is greatly appreciated.

I have a 6 week old imac 24" alu intel with wireless keyboard & mouse and it was all working fine until the 10.5.1 upgrade. it also started on the same day there was a big rain storm so I thought that might be messing with my blue tooth connections. i have no other bluetooth devices other than the mouse and keyboard. at first it was intolerable. i'd get the keyboard connection lost message every few minutes, the keyboard would continue to function and the mouse would go very sluggish for a minute or 2. this was happening every 5 minutes or so. i deleted each one an reconnected, shut everything off, restarted the computer and it seemed ok for about 1 hour and then it happened again a few times. definitely not as often as before but it still happens from time to time every few hours. power on both is about 75% and seeing as they have new duracel batteries i'm sure they are not dead.
I did the auto update to 10.5.1 and had all the permission issues so then downloaded and installed the larger 100+ meg update. not sure if this has caused any problems.
So far leopard has only been a pain. Reason 4 crashes, Parallels 3 crashes, Mail crashes (I wrote some important notes which I guess don't get automatically saved like drafts and lost the notes when mail crashed several hours after I wrote them), my software update even crashed once. is Leopard built on OS 9 technology? what a disappointment.
Oh and internet and wireless connection to ADSL seems pretty slow, slower than tiger I think.
Windows should start a new campaign called "Come back".
One last beef, do other people find this wireless keyword (metal) not so responsive, letters get missed as I type, space bar is stiff and squeaky, overall not great for someone doing a lot of writing? that's what I think.

Help! bootcamped window pro 7 ok BUT driver / setup flash drive seemed to correctly install drivers, nvidia etc etc BUT on windows login screen i have no mouse or keyboard , have plugged in logitech usb mouse and keyboard still no good please help

Please can somebody help me with this.
i cannot get any mouse or keyboard input on my login screen after bootcamping windows 7 pro.
i used a correctly formatted drive for the driver downloads, they seemed to install but now i have no input method to login to wondows7.
all is fine in osx apple wireless mouse keyboard magicpad ok
windows cant login due to no input devices.
have connected logitech mouse keyboard still nothing.
please help!
thanks in advance

1. I have tried copying the Keyboard/Trackpad/Mouse drivers to the $WinPEDriver$ directory with mixed success on a 2012 MBP.
2. My experience is based on a 2013 rMBP. You may be able to use an Apple USB Keypad/Mouse to better success.
3. See http://www.macworld.com/article/2460820/macbook-pro-mid-2014-review-minor-update -offers-slightly-better-cpu-performance.html for HW differences between the two machines.
4. If you have access to a 2013 rMBP, I can suggest trying to build the USB on that and working with the USB to see if you can make it install Windows. the rMBP 2014 and rMBP 2013 have the same HW, except some CPU changes. You can also try building the USB at the nearest Apple store, if possible.
5. There is a section in AutoUnattend.xml, which is supposed to install all drivers in $WinPEDriver$ (see this http://support.microsoft.com/kb/2686316 )
<component name="Microsoft-Windows-PnpCustomizationsWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DriverPaths>
                <PathAndCredentials wcm:keyValue="1" wcm:action="add">
                    <Path>$WinPEDriver$</Path>
                </PathAndCredentials>
            </DriverPaths>
        </component>

I can not use my mouse or keyboard when I am trying to install windows via boot camp

Please can you help!
I can not use my mouse or keyboard when I am trying to install windows via boot camp

Starting a couple of days ago my mouse and keyboard stopped working suddenly.
How are they connected? In my case they are wireless and their receiver is plugged into my USB hub. After an update I found the OS inexplicably not recognizing my USB hub and hence any devices which were plugged into it. My fix was to
plug the receiver into a different USB port (so I could use the mouse and keyboard; otherwise I would have had to use the OSK via Touch or pen.) Once I had normal access into my machine again I used Device Manager to remove all USB controller and
hubs (including hidden ones) and I then shut down, disconnected all USB devices and powered back up, this time using only Touch to get going. Once the OS had settled down I started plugging stuff back in the way that I wanted it to be recognized.
If I didn't have Touch I would have had to have left the wireless receiver plugged in both places which I assume would be OK. I have no idea why updates have such a catastrophic effect for USB devices.
Robert Aldwinckle

Brand new IMac 27 bluetooth mouse and keyboard not connecting for eight minutes after start up.

I have a new imac 27 that has worked flawlessly for three weeks.
All of a sudden, when starting up the mac boots fine but the bluetooth mouse and keyboard are non responsive. This state is maintained for between 7 and 8 minutes then both mouse and keyboard start working and continue doing so for the rest of the day....until the next restart and the whole saga repeats itself.
Both sets of batteries are fully charged.
I have scoured different sites and tried any suggestion that made any sense, to no avail. All I am able to do at the moment is to do the time, wait the 7 to 8 mins. and then all's good.
My first Mac and this is very annoying especially as Apple must be aware of this issue but no solution is forthcoming!
Any suggestions/workarounds would be great.
Thanks

if you are using rechargeable batteries sometimes they don't stay charged for as long as they should try using alkalaine batteries and see if the issue still persists.
also try doing an SMC reset, the following article tells how to do this:
http://support.apple.com/kb/HT3964

Tried to install foo2zjs and now PS/2 mouse and keyboard won't work

I was trying to install the foo2zjs tarball from their website and after doing so, I lost the usage of my PS/2 mouse and keyboard in X.
The keyboard works fine outside of X, but once X starts, it can't see it. Other input devices are working fine, like my USB game controller.
I deleted all the /etc/X11 and /etc/xinited* files and removed xorg xorg-drivers and reinstalled them and no hope.
The keyboard and mouse were being detected automatically, and I never had to edit anything for them to work, so why are they not working now?
I even removed foo2zjs and disabled the CUPS daemon and still no hope.
Any idea how I can debug this any further?
Last edited by amrhassan (2011-04-26 15:42:33)

Turns out it was this problem https://bbs.archlinux.org/viewtopic.php?id=117274, I must've upgraded udev while installing the printer driver.
Unplugging and replugging my keyboard made it work, but not the mouse. Maybe because it's the PS/2 thing. Anyway, downgrading the two packages solved the two issues.

Bluetooth mouse and keyboard go off exactly the same time, and don't connect agian after ive installed the mac os x 10.8 updates please fix this apple

After Installing the mac os x update for 10.6.8 ive recentley in the last couple of days the bluetooth mouse and keyboard going off at the same time ive looked at some help but i feel like this is a software bug after installing so any other suggetions than taking it into an Apple Store,
I hope apple fixthis problem in there next patch update.

Hi,
Welcome to the  Discussions
Does the App launch form the Applications Folder rather than the DOCK ?
The icons in the DOCK are links to the App. Sometimes this link can get broken.
8:37 PM Sunday; December 27, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Windows 10 install (64 bit). Mouse and keyboard do not work, can't click through setup configuration.

I've tried with both upgrade and iso installation (starting from Windows 7), but for some reason, after setup is finished and I get into the configuration area (IE, accepting license agreements or choosing network or choosing express setup), I do not have
a mouse and keyboard to do anything with. The keyboard and mouse are powered, but aren't giving input. For example, toggling cap's lock does not show up on the keyboard's lights.
Keyboard is Razer Black Widow, mouse is Gigabyte M8000X. I also tried with a Microsoft wireless mouse/keyboard pair with the Razer unplugged during setup (Reason being, a separate razer setup window would appear during the 'configuring devices' stage).
I am able to install to virtual box, but I've only tried the 32 bit installer. I have not yet tried the 32 bit installer on the actual machine, and I have not yet tried booting to the CD.

Review these,
http://www.tenforums.com/tutorials/1950-windows-10-technical-preview-clean-install.html
http://www.tenforums.com/tutorials/2108-windows-10-dual-boot-windows-7-windows-8-a.html
http://www.tenforums.com/tutorials/2087-hyper-v-virtualization-setup-use-windows-10-a.html

New install no mouse or keyboard

Similar Messages

Maybe you are looking for