New installation - Cisco Prime from OVA on VMWare

Hi,
I have just imported Cisco Prime OVA and followed the setup and entered the IP Address, hostname, DNS, Gateway etc etc... When I attempt to enter via the URL https://CicsoPrime01 it doesn't accept the connection. I'm able to ping to the CiscoPrime machine, but can't get in.
I searched and saw some troubleshooting steps such as ncs status, ncs start....
Result:
/opt/CSO01umos/bin/wcsadmin.sh no such file or directory....
Any help?
Thanks,

if an ncs status returns :::: /opt/CSO01umos/bin/wcsadmin.sh no such file or directory...::::
I would bet your installation is no good.
Please redeploy the OVA

Similar Messages

  • Why cant I restore a new installation of iTunes from  an iCloud backup to my iPad

    I recently had a virus and had to reinstall a new copy of Windows, in doing this I also had to reinstall iTunes, I always thought the idea of iCloud was that if you ended up with the situation that I was in then you could restore your equipment to the state of the last backup that you did, I have looked everywhere for a link that would allow me to obtain my last backup and there isn't one available this obviously tells me that the Apple iCloud qppearsto be a total waste of time and effort, I have also just downloaded and installed a fresh copy of iCloud manager logged in with my original iTunes ID and clicked on Sync nothing absolutely nothing came back from iCloud so perhaps someone out there can either tell me if I am doing something wrong, or is iCloud the waste of time I think it is.
    Regards
    Clive
    Using iPad with iOS 6.2

    So why were the files moved this way?
    Simply copy the ENTIRE iTunes folder from the old computer to the new computer.  Then launch iTunes and everything will be there.

  • New installations not pulling from Adobe Update Server?

    Hello,
    I have an Adobe Update Server v3 running on a Mac 10.7.5 that is working fine for 5 Macs in our office.
    This weekend I nuked one of the Macs and installed the OS fresh as the machine was having terrible crashing problems.
    After installing the OS fresh and installing all OS updates, I
    - downloaded the Creative Cloud App and installed it
    - put the overrides file where it needs to go.
    But all the Apps still pulled from Adobe's servers instead of our own.  Is this by design?  Is there something different I need to do for initial installations so I don't kill the internet bandwidth and my sanity waiting for the downloads to happen?
    Thanks,
    -John

    Hi @keatonj 
    I am nearly certain we can fix this quickly!
    Please leave the printer on and unplug the power cable, then shut down the computer for a minuter, please do don't do a restart, do a full shut down. Then plug the printer back in, turn the computer on add the printer!
    I trust this will do the trick  
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Adding MSE from VMware to Cisco Prime

    Hi Guys,
    I'm trying to register MSE 7.4 on installed on VMWare to Cisco Prime running on version 2.1 but it seems like i'm getting this issue every time i do: 
    "No response from server. It may be unreachable, or server is down or HTTPS connection to server failed"
    I'm sure that the IP address is correct
    I'm sure that NCS username and NCS password is correct
    I can ping MSE from MSE (hehe)
    I can ping Cisco prime from MSE
    I also tried to re install MSE on VM but i'm still getting the same error message.
    How can this be fixed? thanks

     Migrating Cisco WCS Licenses to Cisco Prime NCS Licenses
    The Cisco Prime Network Control System uses a single-tier license model. When Cisco WCS BASE or WCS PLUS licenses are being migrated, licenses will be mapped to the new Cisco Prime NCS single-tier model, as shown in Figure 1. Customers are able to migrate their existing WCS licenses by purchasing the migration SKU (L-WCS-NCS1-M-K9) as also indicated.
    For more information please refer to the link-
    http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-6500-series-switches/guide_c07-653879.html

  • Cisco Prime Infrastructure 2.1 Not generating reports

    Dears,
    I am new to Cisco Prime. I installed Cisco Prime Infrastructure 2.1 for 60-days evaluation and i added routers, switches and APs. I configured SNMP community and telnet credentials. I can see clients on Dashboard, but when i go to reports and generate them for last hour, it displays "None Detected".
    Please advise.

    Programmatic access to PI's data is via the REST API.
    Check the help menu on your PI server to see documentation regarding the supported tables and fields that can be queried via that method.

  • Cisco Prime infrastructure template undeploy

    Hi,
    I am new to cisco prime, I have create the new Trap receiver template and deployed to one of the wireless controller and saved the deployment
    Now I want to undeploy the templates, When I tried undeploying the templates for same wireless controller, I got the warning message stating "Failed to undeploy the template"
    Please advice on below points
    1. How to undeploy the templates in cisco prime infrastructure
    2. Where to find the snmp traps ( steps to check the snmp traps) in cisco prime.
    Please Help!!!!!

    Using System Logs
    Prime Infrastructure logs all error, informational, and trace messages generated by all devices that are managed by Prime Infrastructure.
    Prime Infrastructure also logs all SNMP messages and Syslogs it receives.
    You can download and email the logs to use for troubleshooting Prime Infrastructure.
    Step 1 Choose Administration > Logging. The General Logging Options Screen appears.
    Step 2 Choose a Message Level.
    Step 3 Check the check boxes within the Enable Log Module option to enable various administration modules. Check the Log Modules option to select all modules.
    Step 4 In the Log File Settings portion, enter the following settings. These settings will be effective after restarting Prime Infrastructure.
    Note The log file prefix can include the characters "%g" to sequentially number of files.
    Step 5 Click the Download button to download the log file to your local machine.
    Note The logs.zip filename includes a prefix with the host name, date, and time so that you can easily identify the stored log file. Included in the zip file is an html file that documents the log files.
    Step 6 Enter the Email ID or Email IDs separated by commas to send the log file.
    Note To send the log file in a mail you must have Email Server Configured.
    Step 7 Click Submit.

  • Cisco Prime Reports

    Hi
    I am new to cisco Prime infrastructure, want to understand the generation of the reports in report launch pad.
    I have followed procedure as per the document, Report launch pad-->Report Type-->New
    Need clarification on fields
    Report Title- Report title should be suffixed with Virtual DomainName,  can we mention the report title without any domain name and what difference does it make.
    Connection Protocol-- I am unable to find the connection protocol field
    Scheduling - How the scheduling will be done, based on the reporting period
    Export Format- Default file locaion, where exactly it will be, how to find it.
    Destination- can we extract report without marking the destination
    Please help!

    Wireless Network Utilization
    This report shows the overall network utilization based on the aggregated port utilization of all controllers in your network. These statistics can help identify current network performance and help with capacity planning for future scalability needs.
    Note Average utilization (%) is the percentage of utilization where utilization is calculated as ((Tx+Rx)/bandwidth).
    Source: http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-0/user/guide/prime_infra_ug/reps.html#pgfId-1060053

  • Installing cisco prime on vmware & migrating from wcs

    Hi,
    We have been tasked to install prime on a vmware box then migrate from wcs, i have never done this before & was wondering if anyone has any experience in doing this way, how easy is it & if you have any docs etc?
    Cheers
    Sean
    Sent from Cisco Technical Support Android App

    Hi,
    A  direct upgrade from a WCS release to Prime Infrastructure 1.2 is not  supported. You must first upgrade to an NCS 1.1 release, and then  upgrade to Prime Infrastructure 1.2.
    Please check the links below:
    Cisco Prime Infrastructure Configuration Guide, Release 1.2
    http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/tasks.html#wp1215225
    Release Notes for Cisco Prime Infrastructure, Release 1.2
    http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.2/release/notes/cpi_rn.html#wp73605
    WCS to NCS or Prime Infrastructure?
    https://supportforums.cisco.com/thread/2176121

  • New installation of Cisco prime Infrastructure 1.2

    Hi,
    We installed Cisco prime infrastructure 1.2 and discovered our entire LAN swtiches and core L3 Switches.
    In Cisco Prime, we are getting information related to Device and IOS. But intreface ulitilzation information are not avilable.
    we used SNMPv2 RW string and and SSH username for discovery.
    How to get the interface ulitization data ?

    Under Administration > System Settings, then select Monitoring Settings.
    i checked the two options
    Auto monitoring
    Enable deduplication
    But after refresh it is show uncheck, i tried in Google Chrome and Firefox.
    Is this cause the issue of not polling interface netflow???

  • Cisco Prime Infrastructure 1.2 OVA - URL/FTP not working

    The ESXi install of the theNCS  OVA was successful. NCS seems to load and activate interfaces. The console session is working. Using compliant browsers; https://<ip address> does not work. When I stop "ncs" or halt the vm the web page responds shortly but then the connection is lost.  I used "show ports" and tried https://<ip address>/8082 and get a login from the Cisco Prime Infrastructure Health Monitor URL. There is a prompt for the authorization key. How can I confirm the installation is complte and all services are up and running
    Thanks
    Terry

    After digging almost 1 month, I found the answer.
    When you do provision from ESXi with ova file, you have to create "Thick Provision" otherwise, you wiil have same problem such as "some services are not up"
    In my case, I am running ESXi on the top of VM WorkStation since I don't have any ESXi server. When I added 250GB into the WorkStation and did provision with "Thick" it works !!! 
    Since my testing envrionment is little complicated (ESXi with VM WorkStation), I added first 250GB HDD into ESXi, and tried. It didn't work. So I added 250GB into VM WorkStation and did provision through Workstation, it worked (If you don't understand this statements, do not worry. If you have ESXi server, you don't need to worry about)
    As far as cisco ova is concerned, when I talked to one of my my friend who was working for new ACS (Virtual Appliance) he had same issue. He also solved with "Thick Provision"
    FYI, even if when I installed with "Thin Provision", PI 1.2 used only 10GB out of 200GB, so I did not think that I should use "Think Provision". But definitely not.

  • Cisco Prime Installation

    please how do I delete the OVA file of the Cisco prime infrastructure 2.2 and install the Cisco prime infrastructure 2.1 OVA file on a Vmware machine.
    Kindly respond,
    Best Regards,
    Tioluwani

    You have to remove from inventory and optional, you can also delete from disk.  If your 100% sure you want to remove the VM, then delete from disk and it will also remove from inventory.  To install any ova, you will click file > deploy ovf template and install your PI2.1.
    I would stay with PI 2.2
    -Scott

  • Cisco Prime Infrastructure 2.1 Express OVA failing to boot up

    Hi all, i'm wondering if you can help me, i'm trying to deploy Cisco Prime Infrastructure in a lab envrionment but it's not working correctly.
    I've deployed "PI-VA-2.1.0.0.87-Express.ova" to a VMware ESXI 5.1U2 hypervisor with 2x AMD 8128HE CPUs, 96GB RAM, ASUS KGPE-D16 motherboard. The installation works fine, I can answer all the questions and enter the IP address. Once the system reboots, it hangs at the following screen:
    "Kernel direct mapping tables up to 340000000 @ 10000-1c000" is the last thing I see
    Interestingly at this point I can actually ping the VM... I cant connect to the managemnet console on HTTPS though :(
    I did find some related info on a blog https://deekayen.net/kernel-alive-lock which mentions booting with "noapic", however when I try to press "P" on the grub boot loader it prompts me to enter a password which I dont know! My normal admin passwords arent working.
    Any help to ge tthis running would be greatly appreciated
    Thanks in advance
    Ben

    The server takes about 30 mins to boot up, it's not actually broken it's just extremely slow .. I have found numerous people reporting this issue online, and our production system also does this! I guess my original problem is solved, although I would prefer this issue not to exist!

  • VMware Tools on Cisco Prime LMS 4.1

    Hello,
    I have just installed Cisco Prime LMS 4.1 from .ova file on a VMware architecture. My customer wants to know if the server is compatible with vmware tools.
    I looked over Cisco documentation but it is never mentionned.
    Has someone allready take a look into that ?
    Thanks,
    Regards,
    Abel JULIAN,
    Nextiraone FRANCE.

    Yes, the datastore is located on a remote SAN so the original source won't be impacted by the loss of the ESXi. But in a perfect world (with VMtools), Vmotion will move VM from one ESX to another in case of failure, performance problem etc.
    Those functions won't be accessible here, and the VM will need to be restarted manually and reaffected to another ESXi in case of failure. Like I said before, the LMS server is not a critical application so that is not a huge issue. The important is to know that Cisco does not support this feature.
    Anyway, I have my answer so it is ok for me, I will notify my customer.
    Thanks you for your time,
    Regards,
    Abel

  • Replicate in the Master controller and creation of new user with cisco prime infrastructure 2.1.

    Hello!!
    We have multiple controllers Cisco WLC 5508 (all running software version 7.6.120.0) distributed in various buildings and a controller in other control building (also Cisco WLC 7.6.120.0 5508) operating as Master and backup of the buildings's controllers . 
    Each building is radiated such an SSID that is used as a validation of the user connected to that SSID web portal each controller (in the WLAN, Security -> Layer 3 -> Web Policy), using the local database to validate the user. 
    The problem is that the local database of users is not being replicated between controllers buildings and the Master controller, so if you drop the controller of a building, the Master controller begins to provide service to the buildings access points, but the equivalent radiated SSID cannot able to validate users. 
    I need know if it's possible through Cisco Prime Infrastruture 2.1, first replicate in the Master controller on the basis of existing controllers buildings each local data and, second, that the creation of new users are automatically perform both the controllers like to the Master .
    Thanks.

    As noted earlier, it is not advisable to use the root user to log in for normal use. New users and groups can be created by navigating to Administration > Users, Roles & AAA as shown in the preceding figures. It would help to chalk out what are the various levels at which you want to distribute the users, and to create those roles first. It doesn’t really matter whether you create users or groups first. New users can be easily added by going to Administration > Users, Roles & AAA > Users > Add Users > Select “Add Users” from the drop-down on the right side. Once you get into the add user workflow, fill in the username, password, and local authorization for this user as shown in the figure below.
    A virtual domain can also be assigned to the users when you define their roles by selecting the virtual domain on the left side and moving it to the right side as shown in the image below (left).

  • Cisco Prime Rogue AP Report - No Rogues from 3702 Series AP's

    I am running Cisco Prime Infrastructure (2.1) that manages a Cisco 5508 WLC (7.6). We have multiple version of AP's managed by this WLC to include 1142, 2602, 3702, etc...In Cisco prime when we run a Rogue AP Report. None of the Rogue AP's discovered by 3702's are displayed in the report. The Rogues show on the WLC though from all AP's. Cannot find a reason for this. Any ideas?

    The Rogue alarm state always stays on "removed" once deleted
    CSCuo91446
    Description
    Symptom:
    Once one of the alarm of rogue AP is deleted the newer rogue AP alarm changed to removed state even for different mac address.
    Because of the removed state the detecting AP which detected the rogue is not displayed
    Conditions:
    1) Auto SPT is turned on
    2) Prime 2.0 or 2.1
    Workaround:
    Click on refresh from network for each alarm in removed state or disable auto spt
    Last Modified:
    Jun 30,2014
    Status:
    Fixed
    Severity:
    3 Moderate
    Product:
    Cisco Prime Network Control System Series Appliances
    Known Affected Releases:
    (1)
    2.1(0.0.1)

Maybe you are looking for

  • G/L Account F4 Help Error

    Dear Gurus,                    I am working in Extended Classic Scenario and when creating the Shopping cart and assigning the Cost Assignment where in when i am clicking the Find for G/L, there is an error message displayed like "Display Not Possibl

  • My mac is runnug out of disk space. Do /i need to by external drives?  how much memory should i get

    My imac is running out of disk space. I download a lot of media from itunes. The HD movies and TV shows use so  much space. Should I switch to the cloud, clean up my memory or buy an external memory drive? If i get an external drive how much memory i

  • My HP G70-120EM Laptop with a blueray player will not recognise blueray discs.

    my HP G70-120EM Laptop with a blueray player will not recognise blueray discs. Any idea what software update I need?

  • Class not found - ie

    When, I compile applets, I continually get class not found errors when I run it from IE... (Status bar says Class (name) not found) But when I use appletviewer, the applet works fine The files are where they are supposed to be... Here's the kicker...

  • Excucute a command for print

    Hello, i'm working in a Red hat in a Tomcat, and i want to execute a command that print a document and i am using: Runtime rt= Runtime.getRuntime(); try rt.exec( "lpr -Pimp2 /var/tomcat/webapps/ecarta3/impresion.txt" ); } catch ( IOException ioe ) {