New iPod Unable to join the network after inputting password

Got my iPod this am..
looked too good to touch no pun intended.
I went through the instructions, interrupted with an offer to update_, which I did.
I then saw that the iPod was off line and went to set up the connection.
I do have a Time Capsule but I just use it as an external drive, I use Ethernet connections between it my Netopia router/modem which provides my Wi Fi for another computer.
I have a WPA-PSK security on the Netopia.
My Wi Fi shows up on available networks, I am asked for my password but then I get a message "Unable to join the network"
I must admit that my password is long (and a bit racy) my fingers a bit big, but I know that I have got it right on at least a few occasions.
I have tried entering the details on "Other network" with the same result.
Could my WPA-PSK be a problem?
I would be most grateful for any suggestions.
Various forms of this problem have appeared on this forum, but I think mine is a bit different.
Thank you.

Thank you.
Went through that pretty well.
Finally solved it in 2 steps.
1. reset my modem/router to factory settings.
Odd situation, wireless settings, but dependent on ethernet connection.
2. read a post from Hong Kong re strange network settings.
On his advice, into network, changed location from Automatic to one of my choosing.
Bingo! everything came good.
Totally wireless connection. iPod jumped to it. Isn't it great when everything comes together?
I still wonder why it didn't take the signal from the WiFi part of my Modem/Router?
Probably just as well as it sorted my Time Capsule connections out, probably for the first time since I bought one back in early 2008, and its recent replacement when it joined the epidemic of sudden death recently.
Cheers

Similar Messages

  • Receiving "unable to join the network " after Iphone4 to IOS5

    I have an Iphone 4, I upgraded to IOS5 and now I am not able to join my wireless network.  I have an apple airport express.  I have tried to reset the network settings on the phone, changed the SSID on the wireless from CAPS to lower case, removed encryption and left the network open to see if I can connect, but no luck.  We also have a Iphone 3GS not yet upgraded and it connects to the same wireless network without any problems.  Any suggestions, or is this a problem with the new IOS5. 

    I haven't had that problem though that doesn't mean it's not an iOS 5 glitch... It would probably mean a glitch if that 3GS also fails to connect after upgrading to iOS5.
    I'd keep playing with different changes on the airport... chaning the channel, encryption, signal from 2.4 to 5.0 (i you have a newer model)
    If all else fails... sadly you may need to do a full restore and go from there.
    I use a 1st Gen time capsule and have no connection issues with any of the 4 devices I upgraded to iOS 5 (2 iPads, 2 iPhones)
    You've tried the right possible fixes...
    does your iOS 5 iPhone connect to any other network or just not yours??

  • I have a new iPad 2 which will not connect to my wi fi despite a new router being installed. When I tap my network name (which is with TalkTalk) the message comes up "unable to join the network TalkTalk etc...)

    I have a new Apple iPad2 which will not connect to my wi fi despite a new router.  When I tap the correct address it comes up with the message "Unable to join the network TalkTalketc... It does connect in other peoples' houses . Am I right in thinking that the trouble is with TalkTalk?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Ipod wont connect to wifi, says "unable to join the network"

    my ipod touch wont allow me to join my home wifi network, tells me "unable to join the network"

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I bought a used ipod that I'm trying to set it up and it isn't letting me join my home wi-fi network. So I turn it on and I pick language, then country, then my wi-fi network. When I put in my password it says  -Unable to join the Network.  please help!!!

    I bought a used i-pod touch 4 gen that I'm trying to set up.  It isn't lettting me join my home wi-fi network. So I turn it on and I pick language, then country , then my wi-fi network.  When I put in my password is says - unable to join the network.  I have 4 other Apple products that I have that are working fine.  Please help

    Badunit you said "Continue setting up without the network. You can skip past it, right?"
    It sounds like he is setting up the iPod via wif. You can't continue. What yo can do is reset the iPod
    - Reset the iOS device.
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Then start the setup over again but this time connect the iPod to a computer and set up via iTunes. Then he can troubleshoot the connection proboem.

  • When I try to connect to the wi-fi net work at my work place on my new iPad 3  I get a message, "unable to join the network". I have verified the password, so I know it is correct. I know the wi-fi works, because I can connect at home.

    When I try to connect to the wi-fi net work at my work place on my new iPad 3  I get a message, "unable to join the network". I have verified the password, so I know it is correct. I know the wi-fi works, because I can connect at home. I have already tried the following:
    turn wi-fi off and on again
    did a hard restart of my iPad
    reset network connections back to factory settings
    verified wi-fi is working as my computer accesses internet without issue.
    verified that my software is up to date.
    Does anyone have more suggestions?

    Couple of suggestions.
    First, many companies have a gateway on their networks that block non approved devices.  I work in such a place.  You might check with an IT guy , and see if they have a block in place.
    Second, the message you are getting means that you have not negotiated the security settings.  So either the password is wrong ( case sensitive), or, in some cases, they want a network key as opposed to your normal password.
    Again, if you can find one, talk to an IT guy and see if he has some suggestions.

  • After getting 4G with AT&T I am unable to join my network and get the error message: Unable to  join the network "Jude". How do I fix this? Thank you

    After getting 4G with AT&T I am unable to join my network and get the error message: Unable to  join the network "Jude". How do I fix this? Thank yo

    Try power-cycling your wireless router (unplg for 30 seconds, plug back in).  Here's a longer list of troubleshooting steps: http://support.apple.com/kb/TS1398.

  • When i try to connect my new ipad to my home wifi i get a message saying unable to join the network BTHub and my only option is to dismiss

    when i try to connect my new ipad to my home wifi i get a message saying unable to join the network BTHub and my only option is to dismiss

    If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
    First, test your iPad on some other networks: a friends, Starbucks, Barnes & Noble, etc.
    If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
    If your iPad does not function well on other networks it possibly has a hardware problem. Contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
    If you need more help please give the make, model, and version of your WiFi router and how you have it configured.
    See also here: http://www.apple.com/support/ipad/wifi/

  • Unable to Join the network ...

    I've seen similar posts with the same title but none of these solutions work for me. The problem is that I can not connect to my home Wi-Fi network. Following are the details:
    - I have a new iPod Touch with OS 2.2.1
    - My wireless router is an Airport Extreme running 7.4.2
    - My wireless security is WPA2 Personal
    - I have no problem connecting other devices such as Mac laptops and desktops so I know the correct password and the usual settings
    - I have also been able to connect my Touch to another wireless network with WPA2 security! This leaves me to believe there must be some incompatible setting on my Airport Extreme.
    - I have gone through the various trouble-shooting steps on Apple's support site, to no avail. I have reset both the Touch and the Airport many times
    - The Touch can see my network but when I enter the (correct) password I get the error "Unable to Join the Network ..."
    Any help would be appreciated! I can certainly take my Touch to my local genius bar, but that won't help if the problem is with my Apple wireless router.

    If you can see your network, then you are at least not making the same mistake as many AE users - leaving the router broadcasting in N mode only.
    Are you using anything like MAC address filtering on your network? Is DHCP on? The easiest thing you can try is a) reset the touch network settings; b) log back into your network using Settings > WiFi > Other network and re-entering your network name (case sensitive), security, and password (also case sensitive).
    Try that and let us know what happens.

  • Iphone3g 2.01 - wlan: unable to join the network "xyz" with netgear dg834n

    i m not able to connect to my netgear dg834n with my new iphone.
    every time i´m trying it i get this error:
    unable to join the network "xyz"
    tests i did:
    - restart of iphone
    - reboot of iphone
    - switching of security (and mac address control) on netgear
    - tryout of all wlan security combinations on netgear
    - turned netgear off and tried again
    - dhcp and manal settings on iphone for tcp/ip (netgear has dhcp enabled)
    i m using the newest available firmware for dg834n
    any help ?

    Add me to the list. . .and it happened right after the upgrade to 4.2.1. . .
    Coincidence or just just a factor of wear and tear. I've tried 3 calls to Apple and they say the phone needs to be replaced.
    A bunch of youTube videos watched and instructions followed to no avail.
    It seems that the wireless portion of the circuit board connection is prone to cracking in the iPhone. I'm finding references to this gremlin dating all the way back to 2008. I'm wondering if there is a connection with high swings in temperature of surroundings. One clue to whether cracking exists on Circuit board connections is to pop your phone into a freezer for about 10 minutes and see if this permanently or temporarily allows the phone to be able to connect. . .
    The only successful fix I've seen is reflowing the Circuit board by putting it in the oven but that takes a couple of shots of good vodka before seriously trying that. . .There are plenty of Google links on both the preparation and the fix. . .8^]

  • IPhone 5 wi-fi "unable to join the network"

    My new iPhone 5 is my first iPhone and I've had it about a week.  I'm still in the process of setting it up but cannot connect to my home (secured) wi-fi.  I've been reading other Apple forums and Google suggestions and it appears this is a known Apple issue?  My phone came with iOS 6 installed so I have no update available.  I've turned off my router and shut off my phone, rebooting both but I still get an error message when entering our wi-fi password:  "unable to join the network".  I've turned off cellular and re-tried wi-fi to no avail.  I am NOT impressed with my first Apple product.  What a hassle.  Does anyone have any other suggestions to try or am I stuck waiting months for an Apple fix?

    There are a couple of things that you can try. First, try disabling the security on your wifi network and see if the phone will connect. Check the type of security you are using. Some have reported the iPhone reacts differently to some wifi security. Check to see if there is a firmware update to the router. This is usually the biggest culprit of the bunch. Once routers have been updated and restarted, troubles disappear.

  • 'unable to join the network...' wifi network error ! please help, 'unable to join the network...' wifi network error ! please help

    im on pay as you go.. still trying to set up wifi to my home network.. im putting in the password (sky broadband) and i keep getting the message
    Unable to join the network...
    driving me crazy now - please help !

    Other possibilities:
    Your router firmware is out of date. Check the manufacturer's website for an update
    You have MAC (Media Access Control) filtering enabled on the router, that restricts access to "known" devices and the new iPhone is not on the table of known devices
    Your router has a setting limiting the number of simultaneous allowed devices
    Your routers SSID ("name") is still the default (e.g., LINKSYS, DLINK, NETGEAR, etc). Your phone has encountered other routers with the same name as you have traveled, and the phone is confused as to which router is the real one. If your router's name is still the default you should change it.

  • HT5569 When I attempt to choose the wi fi network I set up my iPhone message says "unable to join the network."  It's my network!

    Recently, my iphone 4s lost connection with the wifi network I set up on my imac desktop.  The message I receive is "unable to join the network..."
    Can anyone offer a solution to this problem?  Thanks!

    Oh, so the problem has nothing at all to do with the iPhone ... it is that you cannot remember the network password!  No wonder the iPhone cannot join the network.
    Why not simply destroy the network and set up a new one with a password you remember?

  • TS1398 unable to join the network

    Just received new iPhone 5. It sees local networks but keeps giveing me the "Unable to join the network". How do I mannually join the network? Or reset the individual network to allow me to put in another password. The first time I set it up I entered the wrong password and not it will not let me put in another password. 
    iOS 6 and iPhone 5

    I was unable to join the network on my iPhone 5 as well and it turned out that I had incorrectly entered the password (fat fingers). My network was working fine on my other iDevices. Yes, you'll need to reenter the network password again and to do that:
    1) Go to WiFi under Settings
    2) Select the blue arrow at the right of your networks name under 'Choose a Network..."
    3) At top of page select "Forget this Network"
    4) Choose "Forget"
    5) Go back to WiFi
    6) Choose your network.
    7) Reenter Password!
    Message was edited by: Doc-

  • Unable to join the network on iPhone 5

    My phone was using IOS 6.0 when this first started happening. I was able to join a public network (i.e. church, hotel). It connected the first time without problems. Then another time later I was unable to. I got the "unable to join the network" message. The phone can see the network.
    I've tried several attempts. Tried the following:
    - forget network (does not give this option anymore)
    - turning wifi on and off
    - reset network settings
    - resetting the phone by holding the buttons for 10 seconds
    I am able to connect to my home wifi without any problems and my work wifi, and possibly others.
    My wifes phone is identical to mine and she is able to connect to the church's wifi.
    I even tried the update to IOS 6.1 - same result.
    Since these are public routers, I don't have the option to reset their hardware.
    Suggestions?

    Take it back and have it replaced as it is a hardware problem. I had the same problem with my iPhone 5 bought in July 2013 direct from the Apple Store and went thro hundreds of blogs to try & fix it but had no luck whatsoever. The only way I got it to work was to turn off the security on my router. This wasn't a viable option long term as well as the majority of other places that offer Wifi also use secure wif networks. There appears to be a problem with some batch of iphone 5's ( as per research online) not accepting the WPA 2 personal security settings due to a faulty chip or antenna using the 2.4GHz settings? Quality control must be a problem in their production line?
    Also if you switch to the 5Ghz settings on the router this seemed to work for me but then my daughters couldn't use their iPhone 4s wifi as they don't support the 5Ghz range. Book an appointment to see a Genius at the Apple store and get them to replace it if it is still new and in warranty. I expalined the problem that it would not work on a secure network even though it would work in the Apple Store as it they have unsecured wifi network in store. They agreed to replace it and my new iPhone 5 works fine at home on the same router / Wifi WPA 2 Personal setting that the original didn't!
    Save yourself the massive headache and just get it replaced as glad I did!

Maybe you are looking for

  • Implementar protocolo de comunicação serial UART no LabVIEW

    Boa Tarde, Estou querendo implementar o protocolo de comunicação serial UART no LabVIEW. A descrição do projeto é mais ou menos essa: - Uma Interface no LabVIEW para receber o dados enviados pela serial UART; - Uma DAQ NI USB-6212 irá receber o dado

  • Why my mac book pro went to the US?

    Hi~ Ordered a 13 mac book pro on apple in Canada. And now my mac book pro is in US... 3/28/2015 - Saturday 4:30 pm Departed FedEx location MEMPHIS, TN 2:32 am In transit MEMPHIS, TN 1:23 am Arrived at FedEx location MEMPHIS, TN 3/27/2015 - Friday 4:1

  • Where can I get an OS 10.5 or higher for my iBook G4?

    I have OS 10.4.11 on my iBook G4.  I am trying to install a printer driver for a new home printer.  The installer disk tells me I need an OS version 10.5 and above.  Where do I get that version?

  • N97 problems any ideas solutions?

    hi there i got my n97 on realease date in the uk and have had no problems with it whatsover, until yesterday that is, i had set my phone to always ask when connecting to web, so when home screen was up the message would come up whether to connect or

  • What type of event handling does the JList has?

    hello I know how to use handling using " anonymous inner class " when handling a JList, I don't like this way it is so confusing I would like to use the same way of handling JButton like this: class Class1 extends JFrame implements ActionListener //a