New Mac Mini and Apple Cinema Display

I have just upgraded my Mac (G5 PowerMac) to a new Mac Mini.  I am still using my Apple Cinema display - but I cannot not play all the purchased movies that I have on iTunes now...????

Greg,
Are these movies HD? If they are, you might be having a problem with HDCP which is copy protection that won't let you view movies if all of your equipment is not HDCP compliant, which probably is your Cinema display. I also have a late 2012 Mac mini with an older Apple 20" Cinema display and cannot watch HD itunes movies. You will have to watch in standard definition. Of course you might have  a different problem, but your question seemed similar with my situation. What is strange is that you were able to watch from your G5 Powermac. Maybe the power PC chip allowed viewing as opposed to intel chips, which I think intel created HDCP. Somebody on these boards probably has better answers then me ;-)
Rob

Similar Messages

  • New Mac Pro and Apple Cinema Display

    Warning, for those of you upgrading to the new Mac Pro and you plan on using your old Cinema Display, you will not get the maximum resolution out of the display. In fact, you only get 1650 x 800--which of course is way under utilizing install resources and on top of that not a great picture. Even using recommended set up (mini display to DVI adaptor) does not help. You need a Thunderbolt Display for best video performance. Unless someone out there knows a way to do this--be prepared also to buy a new display.

    Turbostar, it is the Apple 30 inch cinema display. Yes it works but the max resolution is 1650 X 800 which while acceptable does not get me 2560 x 1600 which my D500 GBUs would deliver. The new Pro is optimized for a Thunderbolt display, I am using the correct  connection protocols as recommended by Apple on their web page for this system. There is a specific note in Apple support noted that Cinema displays will only  provide xxxx resolution on the new Mac Pro's. Corsair.

  • 2008 Mac Pro and Apple Cinema Display 27"

    Is there some sort of adapter that would allow me to plug the new Apple Cinema Display 27" with a 2008 Mac Pro? Or what change would I have to make to be able to work this out?

    Adrian - did you end up getting an adapter and using it? I purchased the Atlona DVI to Mini DisplayPort Converter (AT-DP200) to connect my 2008 MacbookPro (with GeForce 8600M GT) to the new 27 in. Cinema display, and though it works, it looks a bit fuzzy in terms of resolution. Having read the response here about making sure it is a DUAL link converter, I was going to try to return it for the AT-DP400.
    Then I read another thread on here that seemed to indicate that the AT-DP400 would not work at all with the 2008 Macbook Pro.
    http://discussions.apple.com/thread.jspa?threadID=2585380&tstart=0
    So now I'm confused. Just wondering what your experience is, if you ended up with getting the display and converter.

  • New Mac Pro and LED cinema display

    Sorry if this has been asked before, I tried searching for it but none of the topics answered my question specifically enough.
    I have a 24" Apple LED Cinema Display purchased less than a year ago. Will it connect to a new Mac Pro and what happens to the power cable that's attached to the LED display?

    I have a 24" Apple LED Cinema Display purchased less than a year ago. Will it connect to a new Mac Pro
    Yes. All the standard cards that come in the Mac Pro have one Mini DisplayPort. The 24"LED display will plug into that.
    and what happens to the power cable that's attached to the LED display?
    It is not used if you don't have a MacBook.

  • Decided to upgrade from an old PowerBook G4, mostly for eyesight issues. Bought a new Mac Mini and hooked it up to an Apple A1267 Cinema Monitor. I cannot even figure out how to turn them on. Help please.

    I am exhausted just getting to the point of being allowed to ask my question.  I recently decided to upgrade from an old PowerBook G4 that we have used for years, and am using now.  I bought a new Mac Mini and a reconditioned Apple A1267 Monitor that was working beautifully when hooked to a slightly newer PowerBook in the store.  Both the Mini and the monitor are plugged in, and attached to each other but I feel light a dolt.  I cannot even figure out how to turn them on or even get a power light to come on. Can someone help me?

    How is the Mini coonected to the momitor?
    Does the power button n the mini not work?

  • I have a new Mac Mini and a 7 year old Mac monitor. The connectors don't match. What to do?

    I have a new Mac Mini and a 7 year old Mac monitor. The connectors dont match. What to do?

    I suspect the monitor has an ADC connector
    http://en.wikipedia.org/wiki/Apple_Display_Connector
    If so you need one of these:
    http://www.amazon.com/Apple-DVI-ADC-Display-Adapter/dp/B00011KHT2/ref=cm_cr_pr_p roduct_top
    Otherwise what connector is on the monitor?

  • I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

    I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

    Please review the options below to determine which method is best to remove the Adware installed on your computer.
    The Easy, safe, effective method:
    http://www.adwaremedic.com/index.php
    If you are comfortable doing manual file removals use the somewhat more difficult method:
    http://support.apple.com/en-us/HT203987
    Also read the articles below to be more prepared for the next time there is an issue on your computer.
    https://discussions.apple.com/docs/DOC-7471
    https://discussions.apple.com/docs/DOC-8071

  • I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

    I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

    Could be a bad cable or bad Thunderbolt port.
    You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
    You can also make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Just got a new mac mini and I can't figure out how to authorize it. Help!

    Just got a new mac mini and cannot figure out how to authorize it.  Help!
    m

    Link your phone number and Apple ID for use with FaceTime and iMessage

  • New mac mini and wireless keyboard

    how do I set up a new mac mini and wireless keyboard at the same time?

    Since the Mac Mini does not come with a Monitor, Keyboard or Mouse those are needed when setting up a Mac Mini. I don't know what brand wireless KB you have or if that even matters.
    I have an Apple wireless keyboard (bluetooth), Apple magic trackpad (bluetooth), and Dell DVI monitor. When I initially booted my new Mac Mini, the screen showed it searching for bluetooth devices. It found the keyboard first and then a few seconds later, the mouse. So, I had all devices to finish setup of the Mini.

  • I just purchased a new mac mini and would like to use my old dell monitor. I tried a HD to VGA adapter converter,it plugs in, but nothing shows on the monitor. Any suggestions? Thanks

    I just purchased a new mac mini and would like to use my old dell monitor. I tried a HD to VGA adapter converter,it plugs in, but nothing shows on the monitor. Any suggestions?

    What do you mean by "HD to VGA adapter converter"?
    Do you mean have an HDMI to VGA adapter connected the the Mini's HDMI port?
    Or maybe you plugged n the the included HDMI to DVI adapter and then connected a DVI to DVI adapter?
    In either case that will not work since VGA is analog and the Mini's HDMI port is digital only.
    You need to purchase a mini displayport to VGA adapter. It plugs into the Mini's Thunderbolt port.
    http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter
    Make sure you get a name--brand one. I purchased some el cheapo, no-name ones and they did not work

  • I just bought a new Mac mini and can't remember my password to get into the computer. Is there anyway I can unlock my computer without loosing all my files, especially all my photos?

    I just bought a new Mac mini and can't remember my password to get into the computer. Is there anyway I can unlock my computer without loosing all my files, especially all my photos?

    Hi Jeff,
    Reset Password 10.7, 10.8...
    http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/
    Then Reset your Keychain...
    http://support.apple.com/kb/TS1544

  • I have been sync'ing my iPad  2 with Windows XP. Now I have a new mac mini and want to switch to this new computer.  How do I save the info on my pad?

    I have been syncing my I Pad 2 with a pc running windows xp.  Now I have a new mac mini and want to switch the syncing to the mac.  What do I do to protect the information and purchased apps on my I pad? 

    Backup and Restore
    http://support.apple.com/kb/ht1766

  • I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow.

    I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow. Can anyone help me?

    Congratulations on the new Mini. Are you saying you tried burning and it does not play, or do you want to burn it only for the computer to be able to play it?
    OS X Mountain Lion: Burn a CD or DVD may help.

  • Connecting new mac mini and a pc to internet

    I have ordered a new mac mini and airport express to connect it to my broadband connection. I have a none wireless pc already connected to the DSL. This is a usb connection to the pc.
    Can I connect the dsl to the airport express usb port and then connect my pc to the free ethernet port? Will this work and would the Mac then pick up the connected printer?

    Can I connect the dsl to the airport express usb port and then connect my pc to the free ethernet port?
    No, this will not work. To use an AirPort Express (or AirPort Extreme) base station, you will need a DSL modem that has an Ethernet port. The reason is that the USB connection requires a software driver to be installed on your computer. Since it's not possible to install drivers (Mac OS, Windows or otherwise) on the AirPort Express because it's not a computer, you'll need to use the Ethernet port. I would recommend you visit the AirPort Express forum. There are some knowledgeable people there who can help you find a new modem that has Ethernet and get everything configured for you.
    -Doug

Maybe you are looking for

  • DVI Flickering Problem

    I recently purchased a mini DVI to S-video adapter to use with my macbook so i would be able to display my desktop on the tv. When i hook the adapter up with the macbook open, the adapter works fine, however, when i close the macbook, the desktop on

  • CF Report Builder and Excel format

    Hi Everyone, I was trying to display a report in excel format in report builder. It shows the data, but I do not find the print button options, whereas I can see it with other formats. Is this the way it is, or do I need to format anything more withi

  • I can't send sms to people not in the address book!

    Hi, I've just bought an iPhone 5s and noticed today that I can't send sms (or imessage) to people that isn't in my address book! If I put the contact in the address book there's no longer a problem, and if I take it away again - it's a problem again.

  • Issue with Security Constaraint in web.xml

    Hi, I have a requirement of having only few set of jspx access to a admin user with some role assigned and another set of jspx to all users. I have created one role in OID and assigned it to admin. I have defined two security-constraint tags in web.x

  • Sign into secure web sites

    I have a PM G5 and  I have just bought a new MacBook Pro, both are running the latest versions of Safari but when I try to sign into some secure web sites such as banking I get a invalid username / password notification but I can sign in on the MacBo