New Mac Pro and Vram

My new mac Pro has dual AMD FirePro D700 6144 MB but After Effects only sees 2 gigs of VRam in the preveiw menu.  Why is that?

Hi shasho,
This issue has been reported that After Effects unable to read full display memory on New MAC Pro and is showing 2GB of available memory how ever system is equipped with 2 Card with 3GB memory each. We are working on this issue on a priority basis.
Regards,
Vinay

Similar Messages

  • I have a new mac pro and can't get a side scroll bar.  What can I do to get this?

    I have a new mac pro and can't get a side scroll bar.  How can I get this?

    The scroll bar is now set to appear automatically when you start scrolling with a trackpad or scroll wheel mouse. If you are using an mouse without a scrolling device, you should change a setting.
    In System Preferences, click General, and in the Show Scroll Bars section, click the option for how you want it to work. If you want to see them all the time click "Always."

  • Just got a new mac pro and can't manage to set a password and keep it.  It keeps telling me I have the wrong password.

    Just got a new mac pro and can't manage to set a password and keep it.  It keeps telling me I have the wrong password.  I want to start over and I can't even get back in to do this bc it won't take any of my passwords.  How can I start over completely?

    You got a new laptop? try asking there or in Lion forum.
    If it has Lion, use the Recovery Mode boot Command-R
    Use that to erase and reinstall - it has network install ability.
    Want MacBook Pro forum or Lion Community?
    MacBook Pro
    Lion Mac OS X Communities
    New, as in from Apple, it would have asked for full setup.
    Want to reset the password? (it is used then I'd wipe it clean and start over)
    How to run the Password Reset utility in OS X 10.7 Lion

  • New Mac Pro and LED cinema display

    Sorry if this has been asked before, I tried searching for it but none of the topics answered my question specifically enough.
    I have a 24" Apple LED Cinema Display purchased less than a year ago. Will it connect to a new Mac Pro and what happens to the power cable that's attached to the LED display?

    I have a 24" Apple LED Cinema Display purchased less than a year ago. Will it connect to a new Mac Pro
    Yes. All the standard cards that come in the Mac Pro have one Mini DisplayPort. The 24"LED display will plug into that.
    and what happens to the power cable that's attached to the LED display?
    It is not used if you don't have a MacBook.

  • New Mac Pro and Apple Cinema Display

    Warning, for those of you upgrading to the new Mac Pro and you plan on using your old Cinema Display, you will not get the maximum resolution out of the display. In fact, you only get 1650 x 800--which of course is way under utilizing install resources and on top of that not a great picture. Even using recommended set up (mini display to DVI adaptor) does not help. You need a Thunderbolt Display for best video performance. Unless someone out there knows a way to do this--be prepared also to buy a new display.

    Turbostar, it is the Apple 30 inch cinema display. Yes it works but the max resolution is 1650 X 800 which while acceptable does not get me 2560 x 1600 which my D500 GBUs would deliver. The new Pro is optimized for a Thunderbolt display, I am using the correct  connection protocols as recommended by Apple on their web page for this system. There is a specific note in Apple support noted that Cinema displays will only  provide xxxx resolution on the new Mac Pro's. Corsair.

  • HT1209 I have a music collection on my iPod (160GB Classic). I have that collection on my old Mac Book. Now I have a new Mac Pro and want to transfer the collection to the new Mac Pro, is that doable?

    I have a music collection on my iPod (160GB Classic). I have that collection on my old Mac Book. Now I have a new Mac Pro and want to transfer the collection to the new Mac Pro, is that doable?

    Thanks roaminggnome. Can I do that transfer wirelessly or do I have to get a large jump drive to copy and transfer. I presume that I cannot use my iPod right?

  • New Mac Pro and now no FLV Export option in FCP

    Hi Folks,
    I have a new MAc PRo and just loaded final cut studio 2 and flash 8 onto it.. I know have no option in the quicktime conversion setting to export to FLV?
    Please any help would be huge at this point...
    Oh.. I loaded After Effects 7 to the new Mac PRo and I get the Export to FLV option from AE so what is the deal?

    Hi Todd, I bet you upgraded from a PPC machine.
    The real problem here is that Flash 8 is/was not a universal binary (i.e. an app that is supported on both the PPC and the Intel Macs).
    So the included "FLV Exporter" QuickTime component does not show up in the export dialog even if it's installed as it just does not get loaded.
    (Should be in "NameOfSystemHD/Library/QuickTime").
    If you update to Flash 9/CS3 you get a universal binary app and QT exporter component and it will work again on your (Intel) Mac Pro.
    Btw., the Flash support that was in QuickTime had nothing to do with export - especially not with FLV - but with playback of Flash content.
    Addionally, AE 7 isn't a universal binary either, so you will suffer some pretty serious performance losses.
    Best regards, Oliver

  • I bought a new Mac Pro and migrated my FCP from my old one. But the new old won't accept my product serial number. Help!

    I bought a new Mac Pro and migrated my FCP from my old one. But the new old won't accept my product serial number. Help!

    Was the FCS on your old machine an upgrade? You will need to enter your original, full version serial first, and then you will be prompted for the upgrade serial number.
    Hope this helps.
    MtD

  • I got a new Mac Pro and I am using my 30 inch cinema display.  It has been flickering grey sometimes and then will stay grey and I have to reboot... this is very annoying..help.  I have reset the pram and that seems to help for a bit but then it starts up

    I got a new Mac Pro and I am using my 30 inch cinema display.  It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help.  I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

    I got a new Mac Pro and I am using my 30 inch cinema display.  It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help.  I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

  • I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

    I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

    What specific KB?
    Do you know it works?
    I set my 2103 nMP with an older (black) Apple USB KB and it worked fine

  • I recently purchased a new Mac Pro and have been trying to back it up on my Time Capsule for the first time.  However, it says there is no available disk space. This time capsule was used with my old Mac Pro that had a Home vault open on it.

    The time capsule was used with my prior Mac Pro laptop that unfortunately had the home vault active on it.
    My new Mac Book Pro does not have home vault open.  But I am unable to back up my new MAC pro laptop because it says there is not enough storage space available.  Therefore, t there any way to just completely delete all the old backup data out of my Time Capsule from my prior Mac Laptop? 
    When I go into the time capsule - it shows me NOTHING as being in the backup datas.  So, I don't know where to begin to delete all the old data off the
    time Capsule and start with a completely empty machine. 

    Therefore, t there any way to just completely delete all the old backup data out of my Time Capsule from my prior Mac Laptop?
    Here is how to do this:
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click Manual Setup
    Click the Disks icon at the top of the AirPort Utility window
    Click the Disks tab below the icons
    Click Erase
    The "Quick Erase" option will only take a moment or two
    Now you can backup your MacBook Pro. If you connect an Ethernet cable from the MBP to one of the LAN <-> ports on the TC, the first backup will go 3-5 times faster than wireless.
    Once you have the first backup done, you can use wireless for subsequent backups since they will only take a few minutes

  • Render times very slow on new Mac Pro and Premiere CC

    Hi there
    I have a brand spanking new Mac Pro  (specs below) working off a G Studio r 24 TB array. Rendering anything in Premiere is taking an age (2 minutes timeline is taking 30 minutes). I am cutting 4k Sony F5 footage (XAVC). I have done tests with 1080 material and this doesn't make any difference.
    I have spoken to Adobe support and reset permissions plus all the basic workarounds suggested: but there has been no improvement. I was due a call back but have not heard anything. 
    Can anyone suggest a solution - i have several important deadlines coming up, and can't really deal with the downtime.
    I understand 3rd party apps take longer, but even with PP effects, rendering is taking way too long: especially with a super fast system like this.
    Regards
    Louis
    YOSEMITE 10.10.3
      Model Name: Mac Pro
      Model Identifier: MacPro6,1
      Processor Name: 8-Core Intel Xeon E5
      Processor Speed: 3 GHz
      Number of Processors: 1
      Total Number of Cores: 8
      L2 Cache (per Core): 256 KB
      L3 Cache: 25 MB
      Memory: 64 GB
      Boot ROM Version: MP61.0116.B11
      SMC Version (system): 2.20f18
      Illumination Version: 1.4a6
      Serial Number (system): F5KPD0DDF694
      Hardware UUID: 8975F4BE-0140-583C-9615-E3BD60BEC8F2

    If you go to the menu File > Project Settings > General and set the Renderer to Software Only, any change?
    MtD

  • New Mac Pro and 9.2 Hangs on Adjustments?? Old G5 Doesn't

    Hello
    I have what should be a very fast new Mac Pro.  6 core at 3.46Ghz.  48Gb of RAM.  Solid state boot drive.  Software RAID 0 with 2 Hitachi 3TB drives, hardly anything on them yet. Nvidea Quadro 4000 CUDA card.  Everything installed and burned in for the overnight 8 hour test with the MPG workstation program at OWC.  Lion 10.7.2.
    I had approximately 700 in camera photos combined still in camera between an up-to-16MP Sony NEX 5N camera and up-to-24MP pics on a Sony A77, that have already been loaded into my 6-7 year old 2.4Ghz dual core G5 with 6.5Gb RAM and much older version of iPhoto. OS 10.4.7 I believe. 
    Last night I loaded all those same pictures into the new machine and 9.2 version iPhoto.  And then deleted them from the cards on both cameras.  No issues. Smoking fast imports compared to the G5 which wasn't all that bad.
    On the G5 with the picture adjust controls I could use the slider to go deeply into those same photos and see the effects of contrast, sharpness and all the other options.  Like butter.  Make the adjustments while in that deep if desired and then pull back to evaluate the overall picture before saving.  Or back in again if desired. No issues.
    With the new rig I couldn't wait to try all of this, but once I go deep inside and start to move the adjustment slider controls the system every time starts getting hung with the spinning wheel.   Have to wait and wait for them to catch up to the curser on that adjustment.  Most of the time the system then will just get stuck and I have to force iPhoto to quit.
    Please....does anyone know why all this latest powerfull hardware and software is doing that, compared to the old, much less capable G5?  I am really concerned now.  Haven't had a chance to get Photoshop and the other production premium software tested yet.
    And one last question please.  Does anyone know if the "Enhance" feature in the Quick Fixes section adjusts Gamma as well?  There seems to be a lot more going on to give the photos depth (what I always really try to do)   than the sum of the small slider movements in the Adjust section.  With my old system and iPhoto version there was no "Gamma" adjust slider in iPhoto proper......but if I saved a photo first to my Desktop for instance, and then called up the adjustment features, there was a Gamma slider there.  Very handy and appreciated.
    I see similar vast improvements on some photos now with the "Enhance" feature that looks like maybe Gamma has been optimized as well?  There now is no Gamma slider available even if the photo is taken to the desktop first.
    Thanks much
    Ron

    Hello Terence
    Thanks for the tip to try.  Couldn't get to it until late last night.  Seems to still be the same in Library 2.
    Also seems to be worse with 27" Cinema Display at full resolution.  And with several sliders on adjustment.  If I drop the resolution to 1920 x 1080 or 1600 x 900 and move smoothly about it is not as apt to hang up.  With as much horsepower as the new Mac Pro has, should resolution of monitor be an issue in these adjustments deep into the pictures?
    How about the Enhance button?  Is gamma involved?  Everything I read about it on searches only talks about boosting saturation of the color and fine tuning with little other slider adjustments.  But on a picture where it has made a big difference to the good with depth and overall look, if I look at where the sliders were adjusted and then undo the enhance, and go back and manually put the sliders in the same position it doesn't look the same.
    Does anyone know if gamma is being adjusted with this button?  Sure seems like it but can't find it mentioned anywhere.
    Thanks again!

  • I have a new MAC Pro and transferred files from a PC. Now I have about 100GB of real information but 300GB of other which I can't ID from summing up each folder and sum of applications, music, pictures etc. What could be occuping the 300GB OF OTHER??

    I have a new MacBook Pro and used the tool to transfer information from my HP Computer to the MAC during set up. THe size of the disk space used on the HP was about 200GB. Now I have 400GB used on the MAC. I have added up all the folders and applications etc. and they total only about 110GB. On the summary the "other " category shows over 300 GB. What could it be. I would like to recover the space.

    Check out :  The Storage Display
    http://support.apple.com/kb/HT1408 How to transfer data from a PC to a Macintosh 
    ===============
    Please read the warranty paperwork that came w/your computer.
    You have 14 days to return the computer w/no questions asked.  Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
    Strongly suggest that you take FULL advantage of the above before it runs out.  Let Apple deal w/the problems.

  • Looking for a definitive answer on new Mac Pro and After Effects

    If anyone can direct me....
    I want to know if AE CS6 or CC would benefit from the Dual GPU in the new Mac Pro. Or, would I be better suited maxing out a current 27" iMac?
    I'm hoping for close to real-time previews of multiple effects and expressions.
    Thanks.

    Adobe has said their CC software WILL support OpenCL going forward, but they have not shipped a version that does support it yet.

Maybe you are looking for

  • How to find the menu path ?

    Hi all, I have one doubt how do we find out the correct menupath if we know the t-code ? for example, SE11 -DDIC we can also obtain the same DDIC screen via menupath from SAP main screen. if I know only t-code.how can i find out the menupath ? thnks

  • Execute SQL Task Error: Resultset Property

    Looking to find help on resolving the below noted error Full Error Text: "The statement has been terminated.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not

  • How to use a MATLAB license with password peotection?

    I am using a MATLAB network license, which is password protected, so when I use a MATLAB script node LabVIEW can't load the proper MATLAB license and fails. How can I submit the username+password info to LabVIEW?

  • Get an error when create a new map cache instance

    The follow is my oc4j console output. le.beans.newMCI] createMapCache xml request: <?xml version="1.0" standalone="yes"?> <map_cache_admin_request> <create_cache_instance data_source="mvdemo"> <cache_instance name="demo_map" image_format="PNG"> <inte

  • HT201304 Connection manager :invoke:failed to find service

    I can't download anything.  This screen comes up after I put in my password Connection manger :: invoke :: failed to find service URL