New mac pro is shutting itself off

Newly installed Mac Pro running 10.9 is shutting itself off. how do I prevent this?

Launch the Console.app in /Applications/Utilities/, select the system.log, and see if there's anything in it that could be calling for the shutdown.

Similar Messages

OS X tiger unexpected failures causing brand new mac pro to shut down.

I wanted to know what to do about or what is causing the error that i have been randomly getting on my new mac pro, purchased about a week and a half ago. My computer will randomly shut down and when i get it to come back up it says something along the lines that OS tiger shut down uexpectadly. I know it cant be to out of date software beacuse i updated it all.

This does sound odd.
I've seen bad power supplies and overheating CPU's do this.
I recommend you place a service call as this issue may be hardware related.
If it turns out not to be hardware related, no harm done.

Macbook Pro randomly shutting itself off?

Hi, my MacBook Pro keeps on randomly shutting itself down along with my charger (as in the light wont show anymore when plugged in). And when it does suddenly shut down, I can't turn my laptop back on unless I do the following: first I detach my charger from my laptop. Second I wait awhile or close my laptop and open it up again then I am able to turn it back on. The next thing I do is if I want my charger to actually work again (its not charging even though I attach it back to my laptop that is turning on), I must first unplug my charger from its outlet and re-plug it in, and that's how it will once again charge my laptop. I have no idea why this keeps on occurring, and it has occurred more often today then it ever had, so much so that I am compelled to ask help from the apple community. Please help me and tell me what should I do. Thank you.

My new MacBook Pro is doing the same thing and I just bought it 11-22-11. I am new to mac, after years on a PC, and I have had mixed messages about whether to use the Mac plugged in once it is fully charged, or use it for hours on the batter and wait for it to run all the way down before charging. When I am fully charged and I am going to be at if for a long time, I find that the screen will go black like it has shut off, keyboard goes black to. Like the person before me asked, if I unplug the power cord from the Mac, the screen comes back. Hmmmm. Do I have a problem with the charger on my Mac? Thanks for helping this Newbee too!

New Mac Pro (late 2013) switching off

Hi, I have the new style mac pro, cylinder late 2013 model 3.5ghz 6 core Intel Xeon E5 on 10.9.4 and have now had a few occasions where I have gone to the machine in the morning only to find it has turned itself off.
I have also had a few occasions where I have woke it from stand by and the fan has started running a lot faster and noisier than normal running conditions. The last time it happened, I powered off the machine and switched it back on and the fan was running silently as normal. This time I have left to see if the fan slows down but it has been 15 minutes now and it is still sounding a plane is warming its engines up ready for a take off.
I have to say that I have not been impressed with this machine since I have got it, it hasn't really felt any faster than my old mac pro in my experience. But thats another topic (I wanted to mention it in case I had a Friday job and its just not performing well)
I will phone Apple as it must still be under warranty but I wanted to ask advice first.
Regards,
Jason

lllaass,
sounds like there is a background application that runs it hot. Open activity monitor an check what applications are running and how much CPU they use.

My Macbook Pro keeps shutting itself off... Why?

I am not sure what happened to it because nothing out of the ordinary has happened.. Just one day it started turning on and off.. and then finally it was permanently off. I took it to a battery store to get a new battery and light icon turned on as if macbook was about to turn on, but screen was black. I looked up online and i found a place that said to take battery out and with batter out hold power button down for 5 seconds. I did this and walah, laptop turned on for me like nothing had happened. I thought that I had solved my problem, but I was wrong. Earlier today, laptop shut down again and I once again had to take battery out and hold power button down.
Does anyone know why my MacBook is doing this? Is there something specific that I need to take it in for? It's so frustrating!

nativenoodle32 wrote:
Is there something specific that I need to take it in for?
Yes. So a diagnosis can be performed so 1) you know exactly what is wrong with it instead of throwing parts at it and trying things that only solve the issue temporarily and 2) so you can get an estimate and get it fixed.

Render times very slow on new Mac Pro and Premiere CC

Hi there
I have a brand spanking new Mac Pro (specs below) working off a G Studio r 24 TB array. Rendering anything in Premiere is taking an age (2 minutes timeline is taking 30 minutes). I am cutting 4k Sony F5 footage (XAVC). I have done tests with 1080 material and this doesn't make any difference.
I have spoken to Adobe support and reset permissions plus all the basic workarounds suggested: but there has been no improvement. I was due a call back but have not heard anything.
Can anyone suggest a solution - i have several important deadlines coming up, and can't really deal with the downtime.
I understand 3rd party apps take longer, but even with PP effects, rendering is taking way too long: especially with a super fast system like this.
Regards
Louis
YOSEMITE 10.10.3
Model Name: Mac Pro
Model Identifier: MacPro6,1
Processor Name: 8-Core Intel Xeon E5
Processor Speed: 3 GHz
Number of Processors: 1
Total Number of Cores: 8
L2 Cache (per Core): 256 KB
L3 Cache: 25 MB
Memory: 64 GB
Boot ROM Version: MP61.0116.B11
SMC Version (system): 2.20f18
Illumination Version: 1.4a6
Serial Number (system): F5KPD0DDF694
Hardware UUID: 8975F4BE-0140-583C-9615-E3BD60BEC8F2

If you go to the menu File > Project Settings > General and set the Renderer to Software Only, any change?
MtD

New Mac Pro (quad) does not shut down!

Hey guys
I've just taken delivery of a new Mac Pro for my home music studio, and have loaded up various software such as Native Instruments Komplete, BFD3, Sympobia etc... and Logic Pro X.
In the last two days, whenever I shut down the Mac Pro, it goes to a grey screen (light grey) with the mouse pointer still visible, and then just freezes and doesn't proceed to power off.
Before I provide further information, does anyone have an idea of what might cause this behavour and anything I should be trying to resolve it?
Cheers and thanks,
Mike

yeloop wrote:
...does anyone have an idea of what might cause this behavour and anything I should be trying to resolve it?...
I don't know what might be causing that but one way to find out is to set your Mac to start up and shut down in "verbose mode."
To turn on Verbose booting, at the Terminal type the following:
sudo nvram boot-args="-v"
Disabling Verbose booting is just as easy:
sudo nvram boot-args=
You'll see the various steps the Mac runs through to boot and to shut down. When it hangs, you'll be able to see what point it's hanging at.
BTW, did it behave this way before you loaded up all that software?

I have a brand new Mac Pro Tower that continually kicks me off the internet and sometimes starts up not connecting to the internet?

My brand new Mac Pro Tower that I spent a small fortune on sometimes boots up and does not connect to the internet when every other computer in my office does and other times it just kicks me straight off. My question is, is there a problem with the wi fi on these machines?

Brand new nMP Mac Pro 6,1 Late 2013.... and it is defective - the older silver tower might be easier to find parts but at least it is not 65 lbs and is something that can be taken in - which I think you really need to do.
When you run etrecheck from www.etresoft.com it can show what is installed, drivers and might help point to something on software side.
Grant is the go-to person here I think among others for networking issues.
Airport Express and signal strength, channel it is trying to use, whether the Network control panel settings are "correct" or need to be changed (even the order, what it is trying to look for and use).
If you move it to another spot or put another computer over in that general vicinity...? behaves the same.
I recall reading where the MacBook Pro model in 2012? and switched to a new chipset and some very long (huge) threads in their forum - which means also there was no real solution given.
No, should not be. And other than network tests would be booting into Apple DiagnosticsTest mode - pulls down from Apple servers.
http://support.apple.com/kb/HT5781

Can I turn off XHCI on new Mac PRO?

I am interested to get a new Mac Pro. I am a bit disappointed that there are only four USB3 Ports. I know that there are expansion appliances and devices that will provide a few more. here is my issue, which will determine if I am a buyer:
I will need to turn off XHCI, reverting to USB2, and hopefully on a port-by-port basis. Now before anyone jumps up and tries to tell me that XHCI will support USB2, I can tell you for provable certainty that XHCI is not truly backwards compatible with USB2. USB2 is an emulation under XHCI. There are some devices that will not run under such an emulation. One of them is the Microtelecom Perseus SDR Radio. I am a collector and SWL enthusiast of 35+ year duration. SDR (Software Defined Radio) is the newest, and very exciting development in Radio. Few are made with MAC OS compatibility, so I run them in Virtual Machines, under Parallels. This works handsomely on my Mac Pro 1.1. But my Mac Pro is long in the tooth. I would like to replace it with a new Mac Pro. But only if I can turn off XHCI. Also please do not wax on about how the manufacturers of such devices should upgrade to USB3. That is not an option for radios that were made 10 years ago.
There must be a way to do this. Apple must certainly want to market the Mac Pro to the Scientific Community, many of whom have devices which are USB2, and finicky about their connections.
I would prefer to turn off XHCI on a port-by-port basis, or to find an extension/expansion device that is not a simple passthrough of USB.
I asked this question at the Apple Store here in San Francisco today, and no one had an answer, or knew what I was talking about. My question was escalated twice to supposedly more knowable persons, none of whom had any idea what XHCI is.
Anyone here know?

No response here in 3 days, so no one knows.
I did manage after a few tries to get an Apple Tech on the phone through the Sales Dep't. He said that there is no way in the Mac OS to disable XHCI settings, and while he recognized that PCs offer control through BIOS, that Apple offers no access to BIOS. He said further that one might discover a way through the Terminal app, but that Apple would not support that if done by a user. So I am NOT going to spend $3500+ on a new computer to have to hack it, and put Support and Warranty in jeopardy. No new Mac Pro for me, no sale for Apple. I may look for a refurb or eBay used Mac Pro 3,1-4,1-5,1, where I can drop in a PCIe USB3 card, and have both for my use, as I wish; nine hardware USB ports sounds good to me.

Final Cut shuts down on new Mac Pro

Hi all,
We've got a new Mac Pro: 3 GHz dual core, 9 GBs of RAM. We've installed Final Cut Pro 5 (via the universal crossgrade and Studio Upgrade).
When Final Cut is opened the preview and program windows are green and will not show video. If Final Cut is shut down then re-opened Final Cut crashes on opening. We've been on the phone with Apple Tech support and the last action they suggested was reinstalling OS X, then re-installing Final Cut Pro. We've done so, and have the same problem.
Thoughts? Suggestions?
Thanks much in advance,
Joey

Let's look at the crash log... When you crash, you get the option of Reporting to Apple? Take that and copy this section of the log:
Command: Final Cut Pro
Path: /Applications/Final Cut Pro HD.app/Contents/MacOS/Final Cut Pro
Parent: WindowServer [117]
Version: 5.1 (5.1)
Build Version: 4
Project Name: FCPApp
Source Version: 602161028
PID: 1460
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000004
Thread 0 Crashed:
0 ...lCutPro.Plugins.QTRtEffects 0x061eea90 KGSetQTRtResFile(unsigned char, short*) + 72
1 ...lCutPro.Plugins.QTRtEffects 0x061f5b08 RTEffectComponentRegister() + 96
2 ...lCutPro.Plugins.QTRtEffects 0x061e521c PluginStart + 2028
3 com.apple.FinalCutPro 0x001b23e0 DispatchRegisterMessage(void*, void*) + 104
. - buncha info -
25 com.apple.FinalCutPro 0x002c10a8 main + 64
26 com.apple.FinalCutPro 0x00002c24 _start + 340
27 com.apple.FinalCutPro 0x00002acc start + 60
Thread 1:
0 libSystem.B.dylib 0x9002c128 semaphorewait_signaltrap + 8
That's the kinda thing we need...But only the crashed section, not the entire log - like the example above. Do not post the entire log. Also, you can check the console log (/Applications/Utilities/Console.app) for any messages...
Patrick

My fully charged iPhone 4 has shut itself off and will not turn back on. It also does not register when connected to my Mac. Any suggestions?

My fully charged iPhone 4 shut itself off this morning and wont turn back on. Any suggestions?

Have you tried holding down the home/power button together until you see the apple logo and then release, then wait for the phone to boot back up. If that doesn't work, try that step again but with your phone plug into your Mac.

MBP Randomly Shutting Itself Off

Hey guys, I wanted to see if the community may be able to help me fix a problem my computer developed last week. At some point last week, I was lying in bed using my MBP when I accidentally knocked the backside against my knee. The computer then immediately went back, and wouldn't turn back on for a while. When it did turn back on, the fans were running in overdrive, but nothing happened on the screen. Realizing what had happened, I reset the SMC, and the computer turned back on and seemed to be working fine. Since then however, my computer has randomly shut itself off a number of times, seemingly for no reason. In addition, it will sometimes not recognize that the charger is plugged in at all. And after it does shut off randomly, booting up takes a very long time. Additionally, sometimes when closed and gone to sleep, waking it from sleep seems to initiate a system restore from last state, but then freezes halfway through the restore, and I'm forced to force shutdown, and restart. Is my laptop on its last legs? Or is my battery about to go, or what's the deal?
I own a 15" Mid 2010 MBP, 2.53 GHz Intel i5, 4GB memory, running Lion 10.7.5
Any help would be greatly appreciated! Thanks!

My new MacBook Pro is doing the same thing and I just bought it 11-22-11. I am new to mac, after years on a PC, and I have had mixed messages about whether to use the Mac plugged in once it is fully charged, or use it for hours on the batter and wait for it to run all the way down before charging. When I am fully charged and I am going to be at if for a long time, I find that the screen will go black like it has shut off, keyboard goes black to. Like the person before me asked, if I unplug the power cord from the Mac, the screen comes back. Hmmmm. Do I have a problem with the charger on my Mac? Thanks for helping this Newbee too!

In need of a new Mac Pro, which one?

In the market for a new Mac Pro, mainly for CS5 apps, an ocassional Final Cut project and some Modo rendering (simple work). My Mac is an early 2008 2.8 GHz 8 core with 10 gigs of RAM, rock solid performance and trouble free and I'm looking to buy a new one within the next week. The 4 core 2.8 appeals to me for the lower price, but inclined for the 8 core, is the $1,000 difference between 4 and 8 core woth it? The 4 core has a faster processor, so I would assume that the difference in speed is basically a non-issue for the work I do, am I right? On the other hand, I rather get the 4 core with at least 12 gigs of ram, since most apps don't take advantage of 8 cores.
Need opinions and suggestions and if someone has a link for performance comparisons test between the two, would be appreciated, can't find any.

Not everyone, but more than a few, swear by SSD making their Mac run smooth and faster all around.
You are rather low on RAM for any real strong CS5 use.
Your Mac can boot into 64-bit kernel, too. Read up on that on MPG and along with 24GB pays 15% dividends.
And you can take advantage of 5870 or 5770 as well as Quadro 4000 ($789 PNY Quadro for Mac on Amazon, versus $1195 on Apple Store). 5770 + 4000 is $1050 investment.
You 'should' be using say 3 x 2-3TB enterprise version drives. And 120-240GB SSD $600.
Intel 3.2GHz Harpertown (Penryn) 5400s are probably not cost effective and seems the highest MHz you can go.
I go with coffee can, create an account to go towards the next system. Put X-amount aside each month and only buy on cash or your business pays for itself in six months.
The real hard part comes when a new model comes out, knowing the first 3 months are often rough and best to hold off, wait, read the reviews and reports. And know that buying that while today you could 'down grade' to Snow Leopard, the next time you can't and it takes time to optimize all the drivers and software that a workstation is more likely to need.
If you have $3.5K burning a hole, then the ref'd 2.8 and optimize "the heck" out of it, with W3680 and everything else, and then sell yours later too for $1500 probably.
http://store.apple.com/us/product/FC560LL/A
Your 8-core 2,8 is not yet ready to retire!

Boot Camp issues in a new Mac Pro 6 core Westmere

I'm trying to install WinXP SP2 on a drive in bay three of my new Mac Pro (with four internal drives). The boot camp instructions state that a boot camp installation should be done only on a drive in the lowest available numbered bay and that I should remove all the drives in the lower numbered bays in order to do the install. If my OS X system and the boot camp utility are on the hard drive in bay 1 and I'm trying to do an install on a drive in bay 3, this presents a problem. Apple tech support suggested that I swap the drives in bay 1 and 3 prior to the install and then swap them back, which I did. This seemed to work. The startup disk control panel in OS X seems to have no trouble dealing with setting my startup disk to either Mac OS X (in bay 1) or Win XP (in bay 3) after the drives were swapped back. However, I have problems on the windows side. The boot camp control panel in Win XP lets me set Mac OS as the startup disk but I get a permanent black screen at startup requiring me to hold in the power button to shut off the computer and then restart it. Afterwards, I can't start up in OS X unless I hold the option key down at startup and manually pick OS X. I can then reset the startup disk to the OS X in the Mac OS startup disk control panel but this never works from inside XP.
Two questions that I would greatly appreciate answers for:
1. Do you need to install windows on a drive in the lowest available numbered hard drive bay in a Mac Pro?
2. Is the hard drive swap trick I did above confusing the boot camp control panel in XP so that it can't figure how to set Mac OS X (switched back to bay 1) as the startup disk? If the disk swap trick is causing the problem, is there another way to do a boot camp install on a drive that is not in the lowest numbered drive bay?
Thank you very much!
Steve

Support for IE6 is gone. IE9 is coming in beta in Sept. And yes, IE8 can run sites in compatibility mode.
My feeling is those apps that require an old and buggy browser like 6 should be headed for the trash.
XP Mode IS XP in hardware virtualization VM. You may want Windows 7 Pro, for XP Mode but also if you have two physical cpus.
Tech support has been known to give conflicting info on a question, or throw up their hands, and seem really like they need to use Windows first, rather than gain a rep for being clueless and unable to help customers.

New Mac Pro (late 2013) crashes / freezes while rendering or editing in Premiere Pro CC

We recently purchased a new Mac Pro desktop (Late 2013, 16GB memory, D700 Graphic Card, 2.7 GHz -12 Core, OSX 10.9.3) and we are running Adobe CC on it. When using Premiere Pro CC (7.2.2) I am having major issues while rendering and editing. About 50% of the time when I try to render it starts off real fast then just freezes. This happens in Premiere and Media Encoder. Sometimes I can just Force Quit Premiere or Media Encoder and other times I have to do a hard restart on the entire computer because the entire computer freezes. The computer will also occasionally freeze whenever doing simple editing or stacking layers. The computer will also just decide to suddenly stop and restart when editing or doing simple tasks like browsing the web. Additionally there has been several times if the render does finish, the final video will have digital glitches throughout the video. I have to redo the render once or twice and it will finally be fine. This all is happening several times a day. This never happened on our previous Mac Pro, but we were not running Mavericks. I used Migration Assistant to transfer from old computer to new computer. So I don't know if this is an a problem with the actual Mac Pro, Mavericks, graphic card or Adobe? But right now I am very frustrated as you can imaging spending all this money for a computer that has been giving us more issues than our previous computer. Any help would be greatly appreciated!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.[bw]/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

New mac pro is shutting itself off

Similar Messages

Maybe you are looking for