New mac user - problem installing OS X on mac mini 2012

I have just purchased a 10 month old mac mini which the previous owner had erased all of his files from before he shipped it to me. I decided I would do a fresh install of Mavericks so as to be sure I was starting with a clean system. I read up on this and then booted with cmd-R, then used the disk utils to erase the Macintosh HD partition so as to start clean, then used the Install OS X option and agreed to the T&Cs. At this point it asks for my Apple ID and so I provide this, but I am then told that I cannot download Lion as it is not available to this Apple ID. Hmmm.
I actually want to put Mavericks on the mac (which I understood to be free now) rather than Lion but I seem to be stuck at this point. Can anybody help please - but remember that I am new to mac/osx so explain clearly. Thanks.

Thanks for the heads up Linc. I went back to the Internet Recovery and it accepted my Apple ID this time but interestingly downloaded and installed Mountain Lion! I expected it to install the original Lion version (as this is what I purchased) or perhaps take me straight to Mavericks as it is the latest version, but to install the intermediate version seems odd. Anyway, it worked and everything seems to run fine so I am now downloading Mavericks as I write this.
Thanks to all for the help.
Terry

Similar Messages

New Mac Mini 2012 - HDMI dolby surround

Hi,
I returned my Mac Mini 2011 because of the poor (lack of) dolby surround support outside of Apple iTunes.
I am very interested to know if somebody can confirm the new Mac Mini 2012 has better dolby surround support. I would like to connect the Mac Mini to my dolby surround receiver with plug and play support in Mac OS X Mountain Lion. And of course compatibility with media software (e.g. VLC or other players).
Thanks for your comments!

The Mini will pass through Dolby and DTS encoded tracks to
any device which can decode it with XBMC, PLEX, VLC,
MplayerX, etc.
The signals can be passed through via HDMI or optically.
The proper set up is required in the Audio Midi Setup utility
and in the app. If you are expecting decoding within the
Mini to multichannel PCM, I don not believe any apps are available
to do that (or I am just not aware of them).
If your are expecting the higher level encodings (DTS-MA or Dolby
True HD), at least up to the 2011 models, they do not contain the
required "protected audio path" to support those formats.

Newer mac mini airport utility can't work with older airport express

Hi anyone who can help me out.
I have a relatively new mac mini (2012), and a much older airport express. I can accesss the internet no problem, but I cannot use the airport utility to chane the password on the airport expres. when I try, I get this message "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." I have the latest version of Airport utility (6.3.1), which is supposed to work with all generaions of airport express. I need to change the password, but I do not have any of the original set-up disks for the airport. How do I fix this?
Thanks for your help.
liametmanu

Unfortunately, AirPort Utility in Lion and Mountain Lion no longer supports the older wireless "b/g" versions of the AirPort Express. This would include model numbers A1084 and A1088.
Please locate the model number on the side of your AirPort Express devices to verify the version that you have.
If you have another Mac running the Leopard or Snow Leopard operating system, you can use AirPort Utilty on that Mac to administer the older Express. A PC could be used as well.
If you cannot use another Mac or PC, then you might want to consider trying an unsupported method to install an older version of AirPort Utility on your Mountain Lion Mac. No guarantees can be offered that this will be successful since Apple does not officially support this method, but it does seem to work for most users.
See this thread for more details:
https://discussions.apple.com/message/22940547#22940547
If nothing seems to work, the final option....likely the one that Apple wants you to use.....would be to buy a new AirPort Express.

I can´t get @ to work at my new Mac mini

Hi
I just bought and installed everything on my new Mac Mini 2012 from my old iMac and I chose Swedish as my language.
My OS is Mavericks
I also connected my apple keyboard and everything works OK.
Except that when I try to write a e-mail.
I can´t write @ instead a get "TM" from holding down the alt-key and the other key (nr 2 key)
The keyboard works perfect with my old iMac.
Does anybody have a clue what I should do to get @ to work.
Maybe a Swede will know what happened ?
Any help would be much appreciated
Cheers
Hans
Ps. This was not written from my Mac mini :-)

Stockholm wrote:
I can´t write @ instead a get "TM" from holding down the alt-key and the other key (nr 2 key)
The keyboard works perfect with my old iMac.
Does anybody have a clue what I should do to get @ to work.
You need go to system prefs/keyboard/input sources and use the plus and add buttons to activate the Swedish Pro keyboard and then select that one in the "flag" menu at the top right of the screen. Apple keyboards are printed with the Swedish Pro layout (and not the "Swedish" one).

Promise Pegasus R4 dont work in my new Mac mini i7 2.6

I bought two new mac minis (2012). My Promise Pegasus R4 does not recognize the device in both. In old mac mini everything works normally.

I was opened the "Console" in the old mac mini (working r4) and show this message when I opened the Promise Utility
06/02/13 11:12:54,026 ReportCrash[3800]: Saved crash report for hasplmd[3801] version ??? to /Library/Logs/DiagnosticReports/hasplmd_2013-02-06-111254_Blaze-Server.crash
06/02/13 11:13:04,149 ReportCrash[3800]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
06/02/13 11:13:04,149 ReportCrash[3800]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
06/02/13 11:13:04,149 ReportCrash[3800]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
06/02/13 11:13:04,150 ReportCrash[3800]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
06/02/13 11:13:04,150 ReportCrash[3800]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
06/02/13 11:13:04,150 ReportCrash[3800]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
06/02/13 11:13:04,150 ReportCrash[3800]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
06/02/13 11:13:04,150 ReportCrash[3800]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
06/02/13 11:13:04,150 ReportCrash[3800]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
06/02/13 11:13:04,150 ReportCrash[3800]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
06/02/13 11:13:04,152 com.apple.launchd[1]: (com.aladdin.hasplmd[3802]) Job appears to have crashed: Bus error: 10

Problems installing OSX Lion - new Mac Mini 2011

Hi!
I'm having major problem with my brand new Mac Mini.
I wanted to upgrade it right away after reading so many succeful upgrading reports on various forums so I bought a 120GB Intel 320 SSD disk and 2x4 GB of Kingston 1333mhz ram. I swapped the drives right away and idiotically used to original drive in a case to create an external installation USB-drive (my 4GB USB drives didn't work).
I then created a bootable USB-disk with the external original drive and tried to install but only get the circle with slash after selecting the drive in the "options" menu. If I remove the USB-drive I get a flashing folder icon. If start holding down Command + S I get a message saying that the "version of OSX is not supported on this platform".
I also tried using the Recovery Assistant HD to create a bootable recovery tool but that gives the same results.
In short:
I can't install OSX Lion on a brand new Mac Mini with upgraded HD and Ram. I don't have the original installation anymore.
Am I out of luck?

Internet Recovery solved this problem. Option+Command+R.

New MAC Mini w/OSX Lion - will not boot from USB or external optical drive when attempting to use BootCamp to install Windows 7?

The University recently purchased 6 brand new MAC minis for deployment in classrooms I support. I am attempting to create a dualk--boot environment comparable to our existing computer systems, only these machines wil be running MAC OS X Lion and Windows 7. After following the procedures outlined in the BootCamp on-screen prompts, and attempting a few techniques I found in the tech support user-base, I am still unable to get the MAC mini to boot up from the USB flash drive, or from an external optical drive, so that I can complete the installation of Windows 7. When using the Boot option key at start-up, all devices are displayed suggesting that they are being properly recognized, however the computer boots to a black screen with an error message indicating that "No bootable devices are found - press any key to continue." I am able to boot into the computer's internal drive, but not from any external devices. I fully expected that the semi-automated BootCamp procedure properly prepares the USB device for booting, and for installing the Windows 7 OS.

Meh, with the price they take for a drive in Denmark, I don't think it's worth it... They take around 160 $ for the drive (that's the cheapest MacBook drive I could find), and I am not even sure that's the one I need.

New Mac Mini with Lion Video Problem With Dell E228WFP monitor

Just purchased a new mini Mac 2.3 with Lion pre installed. I connected to my old Dell E228WFPI monitor via the Mini Display to VGA adapter. The mini mac worked fine for an hour until I put it to sleep. It would not rewake. After rebute the gray screen and apple logo appear with clock, but after clock screen to black and monitor goes to power saver mode. Took unit to apple store twice and could not resolve problem by changing resolution or other methiods. Finally, we learned that the system works fine using Belkin HDMI to DVI cable. This Dell Monitor had DVI connector. Hope this helps...

How can a computer that's been turned off (and I mean completely OFF) get a network request? Only a sleeping computer should react to such a request. If you're sure you shut down (Apple Menu, Shut Down), then only an internal power supply or logic board problem should cause this. The only way it could be software is if Lion is not shutting down the computer but is instead putting it to sleep. Is it a new Mac Mini? If so, you should have it replaced or repaired.

Can I not install Final Cut Studio 2 on my new Mac Mini?

I just purchased a new Mac Mini - it's time to retire my G5 Power Mac.
FCS 2.0 is unverisal - so why can I not loan the software..???

I am having a major problem, I have an old mac purchased 7 years ago and my hard drive got problems but is still working, I got a new mac having OS X system, I have final cut pro 6 and I installed it on the new os X but it didn't work, I also used the conversion method mentioned on the net in order to work on final cut pro x because final cut pro 6 is not supported on OS X, with the conversion the final cut pro X was only able to read the original tapes but was not able to read the edited material, am really stuck and I need help, can someone recommend a helpful solution? when i went to mac technical support office they said that for old macs we can only offer to change the hard drive and RAM and replacing the old hard drive for OS with a new hard drive does not gaurantee that final cut pro 6 will work also, and if something later on doesn't work in the old mac OS we can not fix it or replace it because apple does not provide any other spare parts besides the RAM and hard drive.

How to install windows xp on bootcamp on new Mac mini?

How can i install windows xp on bootcamp on new Mac mini?
I know that i should get an external usb optical drive, but buying such hardware for one use is a waste of money. Is there any other method?
I currently own a MacBook white, and really like the configuration. I it possible to copy the image of bootcamp to new mac mini? If so, what will happen to hardware and drivers?

Admiralali wrote:
Let me get this right:
1- copy the exact image of the winxp installation dc to USB
2- start bootcamp assistant, go through everything, till rebooting
3- boot from USB (hold ALT and select the USB volume)
4- go through winxp setup and done!
Am I missing anything?
I think that USB would be readable only on Mac os or winxp, but will the winxp installer read from USB?
Correct me if wrong.
Having read further websites, I am now a bit more dubious you can do this, at least with an XP installer.
However if you have a USB memory stick and an existing Windows computer (even a Boot Camp one) or can borrow one you could try using the free WinToFlash utility to make a supposedly bootable USB memory stick of the installer. See http://wintoflash.com/overview/en/
The problem is XP predates EFI firmare and XP only really knows BIOS firmware. As such (supposedly) XP would have problems booting from a USB device fully - it might lose connection part way through. Windows Vista and 7 do support EFI firmware.
The other approach I mentioned of temporarily moving the hard disk from the Mini to the MacBook so you can use the MacBook internal CD/DVD drive would work - be careful of the cables. Fortunately a new Mac mini and an old MacBook are two of the easier models to get at the hard disk. See http://www.ifixit.com/Guide/MacBook-Core-2-Duo-Hard-Drive-Replacement/514/1 (they also list other MacBook models) and http://www.ifixit.com/Guide/Installing-Mac-Mini-Mid-2011-Hard-Drive-Replacement/ 6422/1
Regardless of which method you try, the first step would be on the Mac mini to run Boot Camp Assistant and to create the partition for Windows. Then via either method try booting from a Windows XP installer.
As I have taken Macs apart many times, I personally might go the swapping the hard disk over route.

Airport Express problems with new MAC MINI and DLINK router SOLVED

Hi just thought I would post this as it may well help others experiencing similar frustrations with new core duo mac mini and wireless connection or quality problems across the network / internet etc
I have a 3 week old, new mac mini core duo 1.8ghz 2gig ram, 120gb disk - First Mac, connecting to my exisiting wireless network via DLINK ADSL Router 2MB Broadband also one windows laptop and pc also wireless on the network and two airport express potins to stream itunes to
Problem was briefly
Mac worked fine, but the network connection just far too slow, laptop and pc, 1800+ kbps downstream mac mini 90 - 150kbps (http://www.adslguide.org/tools/speedtest.asp)
also if i ping the router directly from terminal (ping -c 20 192.168.1.1) average response 12+ ms with 20% packet loss, yet laptop and pc avg 2ms no losses
Spent 2 evenings on frustrating calls of more than 1 hour each (due to being cut off , then ring back and closed etc etc) and carrying out a the helpdesk troubleshooting (I am an IT consultant I think I am above this level), eventually an archive and install of the os as well
last night I call for the third time, insisting I dont wish to carry out any further troubleshooting, and want it replaced and resolved or my money back
I receive a call back from product specialist (not sure if thats mac mini specialist or airport) but we resolved the issue (his knowledge far superior to the help desk do this do this attitude)
between us we carried out the folowing and resolved the problem and I am now very happy
mac now downstreaming also in excess of 1800kbps (as expected for 2mb broadband)and no packet loss
This problem was resolved by switching off the turbo option hidden away in the routers settings, under wireless configuration
Supposed to improve performance, but its rubbish and will make hardly any difference under mac os to the speed but will certainly affect your mac mini performance(you may have a similar setting switched on in your routers and mac os dont like it)
We stumbled across this by first disconnecting one of the airport express devices from my dlink network, and using it on its own default apple wireless settings, effectively making it a standalone wireless network, and not via the dlink router
we then carried out the same ping with the ip address of this device (from airport admin utility default 10.0.1.1) and the results were fantastic 2ms avg no package loss
this established it was something with the router, and how we then interrogated the routers settings and found the turbo on option within wireless configuration
you may not be able to replicate this if you dont have an additional network you could join (such as airport express), but probably worth checking your own router settings for something similar
Hope that may be of assistance to others, sorry that its a bit long winded and garbled, but I'm just so excited to finally get my new mac working as i would expect it to
Also perhaps insist on speaking to a product specialist immediately that the helpdesk are unable to help you

Hello macfar14. Welcome to the Apple Discussions!
For just streaming iTunes and/or for sharing a USB printer, the AirPort Express Base Station (AX) just needs to be configured as a wireless client ... which you already attempted to do.
Just to be sure nothing was missed, here are the basic steps to do this:
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing wireless network's Network Name or SSID>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

New Mac Mini Server, two Hard drives, Can I install an older Mac OS on the second drive and switch start up disks to run PowerPc applications?

New Mac Mini Server, has two Hard drives, could I install an older Mac OS on the second drive and switch start up disks to run PowerPc applications?

I haven't purchased a Mac Mini at this time and I may not if I can't use it as a non server. I need to update my system I would be better off buying a new Mac with Snow Leopard the last app that will run Rosetta. The Mac Mini Server has a quad 2.0 processor and 4 GB RAM and two internal hard drives and should out perform my dual 1.25 G4. I can run PPC apps on my G4 but it is 8+ years old and seems to be getting noisy. I don't want to tie myself to another old machine. I want a machine that will work with Intel Apps I was hoping that the two hard drives would allow me to boot from the second with Snow Leopard and use Lion on the first drive to be able to keep up to date with all my other universal apps and Mac OS up grades. The application I use the most is my CanvasX app with drawing & vector effects, text & typography, sprite technology, painting, image editing, and multimedia tools are all in this one app but will not be updated to run Intel apps. I am frozen in time because my most valuable Application won't be updated and Apple has cut me off by not supporting PPC in Lion and onward; Apple used to backward support but I guess that they are no longer as user friendly and concerned with a happy user. I have always been a loyal Mac user and I will not migrate to Windows under any circumstance; I hate windows!
Thanks for your prompt response,
Dick Deaton

Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode

Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode
Hello, I am having problems migrating data from my old PC running XP (SP3) to my new Mac Pro 2012 using the Migration Assistant.
- I downloaded and installed the Windows Migration Assistant from Apple
- My Mac recognized PC and displays passcode
- The sasscode does not show / display on my PC
- My Mac is then stuck in "authenticating" loop and the PC is stuck "waiting for Mac to connect."
- Both computers are connected on same network (have connected PC on WIFI and using ethernet to Reuter)
I have looked on support site and only response I saw says to reinstall Windows Migration Assistant (which I have done)
Any ideas? If cant get this to workare there instructions for manually bring across relevant data eg itunes music and apps, photos, picasa data etc?

Why not turn off the Windows firewall and uninstall any other firewall software you have installed?
If you are using a Norton product uninstall it and discard it. To fully unistall most Norton products you have to go to the Norton website and download a soecial program to completely get rid of it. The normal uninstall feature built into the program will not remove all of it.

Scrolling problems on new mac mini

I bought a new mac mini yesterday. Out of the box, it was ready for an update to 10.7.2, which I did. The problem is with scrolling on certain web pages, even when browsing Apple's site, the scroll bar lags or will not move at all. A perfect example would be http://news.google.com/ even after a page has fully loaded, the scroll bar does not respond. After long delay, it might jump to a different scroll position, but definitely NOT smooth scrolling.
I ran disk utility and repaired permissions. I have restarted mac mini.
This is not the case running os 10.7.2 with my 2007 imac.
Any suggestions?

Very interesting....
I restored the entire os lion, no help. Firefox works just fine. Safari is broken, when using screen sharing. I can scroll pages with the mac mini using it's own mouse and display, however, the mini's mouse becomes de-activated when screen sharing is enabled onto it. The mouse controlling the imac cannot scroll safari's browser, nor can it refresh pages when doing such things as 'submit reply'. Lol, I had to reply using Firefox. I do believe it is essentially a refresh issue, during user activity within each page. If you click a scroll postion, and then click outside of the page, it will refresh to the new scroll position. This is the same case as for submitting a reply.
Outside of that, I am disappointed that both the imac's mouse and the mini mac's mouse cannot be used simultaneously during screen sharing with the newest update. Whereas, I can have simultaneous mouse control when accessing a non-lion macbook pro from my lion imac.
I do not see any reason to disallow simultaneous mouse use. This works great for comunnicating to users in other rooms, with direct desktop support.
Actually, I have found that there is still mouse control, it is just not visible on the vnc user's screen. I wish there was a way to re-activate that, it would probably resolve the scrolling issues too. Any know what to replace in what library?

Problem connecting Apple TV to my new Mac Mini iTunes libraries.

I cannot appear to connect via Apple TV to my iTunes libraries on my new Mac Mini. My other iOS devices and MacBook Pro all connect up fine. I have two accounts on my Mac Mini. One is a shadow of my Macbook Pro account and the other is a family account. On the family account, I can see the Airplay icon on the top menu bar but all it gives is the option to open Display Preferences. When I go to my Apple TV on the family account, it attempts to load the iTunes library but hangs for a long time and then states it cannot connect to account. All my software is up-to-date and I have tried a full reset on my Apple TV. On my other account, I don't even get the Airplay icon.
I am at a loss as to what is wrong.

Let me clarify. The computer is on and so is Apple TV (home sharing is switched on both). On one user I see the Airplay mirroring icon (the same one that also appears on my MacBook Pro and my iPad and iPhone). Except that all I get is the "Open Display Preferences". Even in in the display preferences the AirPlay option is greyed out. I have tried resetting options on both the Apple TV and the Mac Mini but to no avail. If my other Apple devices weren't working then would think it was an Apple TV problem. however the problem seems to be in communication. As I said in my original post, the puzzling thing is that Apple TV know what iTunes library on the Mac Mini to connect (as it states it on the TV screen [and it is different to my MacBook Pro library]) and knows it exists but just won't connect to it.

Why does my new Mac mini crash on setup user account ?

Brand new Mac mini i7 with fusion HD. on first time setup, I got as far as the create user account screen & it seemed to be taking along time creating the account (10-15min) so I called apple. the guy asked a few questions & then instructed me to switch off the mini & try again. same result, locks up at the create user account screen with the small wheel turning (slowly) at bottom left next to the text - creating account. after several attempts of turning off & on & trying to setup user accounts with different names & home folder names, the apple guy steped me through a download & erased the hard drive & then started to download OSx. So after a fresh install of OSx, I still have exactly the same trouble. Can get through the initial setup about languages etc but after completing the text fields in the great user account page & clicking next, it says creating account at the bottom left, the wheel turns for 5 min or so then it stops & nothing more happens.
I am very frustrated & disappointed with this. any help appreciated

update:
visit to apple store. the guy turned on the Mac mini & setup an account with apple store defaults, which does not log into the apple server for Apple ID user or password etc...
All works fine. the guy had no idea as to what was causing it to crash, can only assume that it had an issue with loging into the Mac server with the Apple ID. as this was the only thing different to when I & the apple care guys, where trying to set it up at home. happy it works but still very annoyed with the 15hours I had to mess around & the half a day trip to the apple store.

New mac user - problem installing OS X on mac mini 2012

Similar Messages

Maybe you are looking for