New MB too close to MBP

I was ready to pull the trigger on a new MPB, but reading the specs and comparing the new MB to the MBP I am holding off.
Is it me? I can't justify the added expense. I know people will argue Aluminum | 15" better monitor | illuminated keyboard | dedicated graphics | etc. but it all comes down to performance, and I have read performance comparisons - and they are performing similarly. (not including gaming)
I don't know, waiting till January is a long time. I just wish Apple had the 2 models separated more (performance wise).

Found myself facing the same dilemma the day after the new Santa Rosa MB came out, R.
In my own case the graphics chip, backlit keyboard, express card slot, FW800, alu case (my old PB12 actually survived being thrown out of a Nissan Patrol in a vehicle rollover - they are tougher than you might imagine as well as good looking!), bigger screen and extra RAM included in the base price of the MBP clinched the deal.
Horses for courses, though. A well configured MB is hard to beat for value, I reckon, and is a little smaller to cart around (though thicker and not much lighter).
Cheers
Rod
Message was edited by: Rod Hagen

Similar Messages

Text too close to page number in TOC

Most of the time I can take care of unattractive line breaks in the TOC by putting in non-breaking spaces in a paragraph.
However, I sometimes have a situation where the text of a TOC entry is too close to the page number on the right. The text is so close to the page number that in some cases no leader dots show, or only one or two leader dots show.
The entry and its page number fit on a single line, so putting in non-breaking spaces won't solve the problem. I could put in a soft return (Shift-Enter) in the TOC entry to force a line break, but it isn't efficient because I have to put in the soft return manually each time the TOC is updated.
If anyone has a tip on how to handle this problem efficiently, I'd love to know about it.

Van
That is absolutely brilliant. It also seems to prevent multi-line TOC entries from encroaching on the page number area in general.
For ages I thought the only way around this ugly problem would be to wait 200 years for Adobe to give us four different indent options (first line left, left, right, and last line right) instead of the three that we currently have. (Last line right doesn't exist.)
I'll just add one more suggestion that might make your line breaks and page number positions in the TOC 100% automatic instead of merely 98%.
(It doesn't sound like much of an improvement, but if you've ever had to manually adjust the TOCs for 50 manuals every time you regenerated them, then you'll know where I'm coming from.)
If you have any TOC paragraph specifications that use more than one tab, for handling section or chapter numbers at the front of the paragraph for example, then you'll notice that if a TOC entry wraps to two or more lines then the page number will no longer be printed at its intended tab stop, but will use one of the earlier tab stops instead (because in the new line there are no longer any previous tab characters to fill the earlier tab stops).
The cure for this is to go to the TOC specification flow on the Reference pages, and in the problematic paragraph format add an extra tab character in front of the <$pagenum> building block.Then...
If the TOC entry only covers one line, the extra tab character will be ignored.
If the TOC entry covers two or more lines, the extra tab character will be used to fill up the previous stop so the page number settles at its intended tab stop.
If you have TOC specifications that rely on more than two tab positions, just add more tab characters in front of the <$pagenum> building block (and regenerate) until the page number (in multi-line entries) lands at the correct tab stop.
Thank goodness FM uses absolute tabs and not relative ones.

Proximity sensor reacting too close causing droppe...

I have two Nokia Lumia 800 phones and they react too close with proximity sensor causing screen to become active so when I am outdoors in brighter light calls are auto-dropped when my cheek touches the end call button on the screen. I have compared my two Nokias in Diagnostics and they react at exact same distance (around 3 cm) and I have also compared them side-by-side to another LG E900 Windows Phone in their diagnostics where it reacts 2 cm further away (around 5 cm). On the LG calls are never dropped by mistake. Would it be possible for you to change this distance in upcoming firmwares so calls are not dropped as easily?
If I am indoors in darker light or at night it is not common to see it, but during summer time and during more light it is more common I have noticed.
Workaround I have currently is to disable the screen auto on/off feature by pressing power button once after answering or calling. if you do this manually it is disabling proximity sensor screen on/off until you press the power button again.

I find it completely ludicrous that Apple can interject on this thread and say it's received too many posts and has to be shut down and a "new" thread started. Really now? Seriously? Couldn't they also simply pop in and post 'hi guys, we hear you and are working on it' ...or something to that effect? That's my main complaint really is the deafening silence. What they're basically telling us is to complain all we want, if we don't like the phone then return it for a refund ...that is if you still have your original defective phone, for all you that already swapped phones, you're beat and are stuck with our mistake for the next 2 years when you'll be upgrade eligible again. ...WOW, thanks for the statement without technically releasing one. ...I think we're all left in the dark because Apple really doesn't know what is going on with the sensor, they can't and or won't release a statement without getting the facts straight. ...but we all know one fact is straight...the sensor is dysfunctional and that alone deserves an acknowledgement. How are we to have faith in Apple to fix the issue when we're left to believe they don't think there is one.
...btw update on "my fix" ...deleting all your photos and putting the phone in your arm pit and then under your pillow is only a temporary solution, for mine sensor is on the fritz again. ...shaking my head, if only this were
funny.

I in have a product registered an old account, how do i move it to a new account and close the old one?

I in have a product registered an old account, how do i move it to a new account and close the old one?

COntact support by web chat.
Mylenium

Hello I bought my wife a new MacBook Pro, in setting it up for her, I took her Time Machine external drive to migrate onto the new machine but her old MBP not only was on 10.6, it was my old machine which I was still Administrator for. i plugged in the

Hello
I bought my wife a new MacBook Pro, in setting it up for her, I took her Time Machine external drive to migrate onto the new machine but her old MBP not only was on 10.6, it was my old machine which I was still Administrator for.
i plugged in the external drive to start the migration process after entering her name and username from the old machine which gave me the options on transferring the old data over.
I also unchecked the Administrative end that had my info hoping that ONLY her data, files, etc., would be the ones sent over to her new machine which I wanted her to be the ONLY Administrator for. All went like clockwork until the restart.
Normally the screen should show the username and only need the password but both entries were blank, as in ‘Other’ sign in option available only. I entered her name and password, nothing….used her username and password, nothing. Used my old Administrator name and password, NOTHING!
I tried defaulting to factory settings from the Restore feature but it directs me to notify Apple. I tried in Terminal to change the password, nothing. I tried to boot from MY external drive and it doesn’t recognize it. I tried to even use my external drive which actually has the Mavericks upgrade, nothing!
Basically I can only get the startup screen which isn’t accepting the username/password or the Restore feature which doesn’t offer any options helpful!
Please, how do I start from scratch and start over here? Or simply change the Administrator name and password so I can proceed with everything thats already on there? I wish I could even boot from another drive but no luck on anything!

First, on the old machine, make your wife's account an admin one. Log into it and delete yours. Then, update the TM backup. Finally, use Internet recovery mode, ⌘⌥R, erase the HD, and restore the OS. One first boot, follow the steps outlined in Pondini's Setup New Mac guide.

Disply Brightness on new 15" 2.5 GHz MBP Seem Low

Hello - I just bought a new 15" 2.5 GHz MBP, I exchanged it for the 2.4 I bought a week ago. The MBP is connected to a 23" Cinema Display, and all seems good. It seems that the brightness settings on the MBP are darker than on the 23". When I have the brightness slider in the same position for the Display and on the MBP - in the middle lets say, the MBP is noticably darker. It seems that the display was brighter (whiter whites) on the 2.4 that I had previously. Also when I slide the brightness slider all the way to the left on the MBP the screen goes completely dark, where as on the 23" Display it gets dark but I can still see my desktop. I wanted to know if this was normal for the 2.5 MBP or is my display not working properly? Thanks.

Insert you Leopard installer disk and reboot while holding down the 'c' key. Select your language and from the Utilities menu select Disk Utility. Select your hard drive and run Repair Disk.

I made the mistake when configuring a external monitor, of changing the mhz to 75. When I close the MBP I now get a black screen on the monitor. How do I change it back?

I made the mistake when configuring a external monitor, of changing the mhz to 75. When I close the MBP I now get a black screen on the monitor. How do I change it back?
I have a MacBook Pro with the latest operating system, trying to configure a Gateway flat monitor with vga.
Thanks

Apple menu -> System Preferences -> Displays.
System Preferences can also be found in the Hard drive -> Applications folder.
Resetting the PRAM can help bring displays back to factory settings if you can't find what you need:
http://support.apple.com/kb/ht1379

Cannot get all the sounds in library to download. I get this message GarageBand was not able to install the new sounds. Close and re-open GarageBand to download and install them again.

When I attempt to download all the sounds in my Garage Band library, I get this message.
"GarageBand was not able to install the new sounds. Close and re-open GarageBand to download and install them again". When I do this, I get the same message again.
CAn anyone advise how to get all the sounds in my Garageband library?

the same here for the drummers sounds in garageband 10xxx

Text field: First character too close to the margin

Hi there,
I created a form with entry fields. When the user fills in the fields, the first charcater is always too close to the left margin - so that for example it is difficult to distinguish a "3" from an "8" (see attachment).
How can I change that?
Thanks a lot
HeikeK

That's it, thanks a lot! I'd never found that on my own. I thought it was some property of the field, never thought of the paragraph format.
Thanks again.
Heike

I set up my new iPad, then deleted the Pages documents on my old iPad, but this had the effect of deleting them on my new iPad too because they are synced. How do I retrieve the deleted documents?

I set up my new iPad, then deleted the Pages documents on my old iPad, but this had the effect of deleting them on my new iPad too because they are synced. How do I retrieve the deleted documents?

Sorry no. That's how it works.
Check if you still have an old backup and do a restore otherwise it's gone.

In a Quiz the Correct Answer Buttons are too close to the answer letter. How to give more space?

When creating a quiz and previewing, the Buttons to select the correct answer are too close to the letter for the answer. How do I add space between them. Suggestions?

I think what you mean is that the quiz question's Failure action doesn't trigger until the final attempt and that would never happen if attempts is set to Infinite. So if you were only incrementing the variable when the quiz question registered final failure then you'd only get one crack at incrementing the variable. yes. My bad.
However, if you are using Multiple Choice questions, you can also trigger actions using the Advanced Answer Option. This will trigger an action when a particular answer is selected. So if you set this for each incorrect answer, you could increment the variable each time they select the wrong answer.
You can also use this same Advanced Answer action to execute a conditional action that first checks the value of the variable and then shows the rollover caption or increments the variable as needed.
Say you create a variable called WrongAnswer and initialise it with a value of 0. Then you create a Conditional Action called CheckWrongAnswer that looks like this:
If WrongAnswer is equal to 1 assign Wrong Answer with 2, (then on the next line) Show RolloverCaption, ELSE assign Wrong Answer with 1.
This shows the rollover caption after the second attempt resulting in an incorrect answer.

Strange email problem; it started only loading unread emails, but from 3 months ago. It is now loading new emails too, but no emails in the past month, read or unread. It's gmail, set up through the phone, I've restarted restored

Strange email problem; it started only loading unread emails, but from 3 months ago. It is now loading new emails too, but no emails in the past month, read or unread. It's gmail, set up through the phone, I've restarted restored and updated firmware, deleted the account, anything I could think of, but it's just not accurately downloading the most recent emails.

The answer is very simple: You were not the original owner of the phone. Target sold you a phone that had been returned. You can verify the date of the original sale here: Apple - Support - Check Your Service and Support Coverage. I suspect you will find that the warranty expiration date is not one year from the date that you bought it.

Dual Cinema displays, connectors too close

Oh so I have a dual display card and 2 20in cinema displays. The connectors on the video card are too close together to accommodate the fat plugs on the 2 cinema displays. I had to other branded displays and the connectors fit nicely. Is there an extension to fit on these to bring them away from the computer without having to swap out the card?

Your Mac Pro should have come with a short DVI(M) to DVI(F) extension cable with small connectors. Use it for one of the displays.

Printer prints too close to top edge...

Can not align my labels from either of our 2 pcs so it is printer not settings.....?..normally prints too close to top egde losing first line of text from work doc which is a pain. Was fine, suddenly decided not to play fair. Any ideas? My christmas cards need their labels......

What printer are you using?
What OS are you using?
How is the printer connected to the computer?
What program are you trying to print from?
Does it do the same thing from other programs?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

DVI ports too close together

HI, I tried to connect a second display to my Mac Pro (early 2008) last night and it seems that the DVI ports are too close together and I am unable to fit a second DVI cable in the open port. It's very odd, the 2 ports are shifted to the right and not centered.
I have the NVIDIA GeForce 8800 GT upgrade but everything else is untouched. Any thoughts?
I already see myself giving my machine to be "repaired or replaced" by Apple but I really would rather not of course. . .
Thanks,
Gary

Tim - Thanks for the suggestion, it's the answer to the problem. It's not who you know it's what you know.
Thanks,
Gary

New MB too close to MBP

Similar Messages

Maybe you are looking for