New Member / Video Card Choice Question

New CS4 Production Premium User Here.
I am building a computer system specifically for Video Editing and production for use with Premier CS4 & Sony Vegas.. Have been doing my usual amount of Over Research here and other places but have a series of issues I am having a little trouble coming to grips with.
I have been into computer editing game for a long time but strictly in the Audio Recording /Mixing area /..
Video is a new interest which has me hooked / Im also a Gear Junkie so I have to watch it. 
I will probably be back with a couple more topics but to keep this thread simple /
My first post question is the topic of Video cards: Adobes Hardware compatibility list seems a little out dated. ?
The system does not have to be an ultimate gaming rig as I am not into that / just SD & HD Video editing & 3d effects.. I need a card which will do what is needed / works well with Premier CS4 / Is not too loud fan wise / can run 24/5 and not overheat.
I also will need the ability to monitor on a HD TV with a good sound monitoring system / Midas / Bryston / Dynaudio etc;
I was considering either of the following / from lowest price to highest.
ASUS GeForce 9600GT Silent 650MHZ 512MB 1.8GHZ DDR3 PCI-E Dual DVI-I HDCP HDTV Out
ASUS GeForce 9800GT Matrix 612MHZ 512MB 1.8GHZ DDR3 PCI-E Dual DVI-I HDCP HDTV Out
ASUS GeForce 9800GTX+ Dk 740MHZ 512MB 2.3GHZ DDR3 PCI-E Dual DVI-I HDCP HDTV Out
Questions:
Is a 512mb card sufficient?
Will all of the above do what is needed for my purpose?
What about noise of heat issues.
My system could be running close to 24/5 at times.
Have not made a final decision on all components but will probably basically start of like this.
Vista 64 Bit/OS
Core I7 940
Asus Rampage 2 Extreme or a plain P6T
Antec 1200 Case / For now I will leave out the hard drives and other things on my list.
My builder suggests to stick with ASUS Video Cards because he has the fastest warranty replacement service on his end for ASUS products / plus I am a total ASUS Motherboard guy with years satisfied experiences.. (in Audio setups).
Any feedback or comments on the above will be appreciated.
Thanks / Orion

Thanks Members for the Feedback:
I am trying to stick just to the Video Card Issues so the topic does not get all over the map / Raid issues have already been researched & I might have a question about that later in another thread.
Witha the video card issue I am just trying to see if I can get a reply which the majority of users agree upon / not an easy task & that is were my confused state of topic started.
b Keith
It seems what you have said about QUADRO cards is the most agreed upon overall from my last three months of research at various locations / The cost is extreme for these cards & I was just trying to determime if I realy needed to go that far : >$2,000.00 and up.
just for the Graphics card..
Perhaps I should start of with one of the cards I first mentioned which are dirt cheep compared to the Quadro series and replace it when I have arrived at the point where my shills are beyond my hardware limitations.
b Charles & Jim.
Thanks for the reference to the . >ASUS GeForce 9800GTX+ Dk 740MHZ 512MB 2.3GHZ DDR3< I was thinking this might be the best to start with / except for the reported could be problems of / Noise / card size and Heat issues if running 24/5?
Other issues you have stated also seem to be agreed upon from mny sources as well / which is why I am considering perhaps not going Raid "o" from the start / perhaps Raid 5.. / or No Raid until I see If realy need it for my own personal use level.
b conclusion to this point in the game:
Looks like If I do a top notch system following all the higher end recomendations it will cost me over $10,000.00 (if I include a capture card / raid card (Areca 1220 or 1240(don't want to get into that topic just yet)& all the extras... This is about double the investment I had planned as this is basically a serious hobby not a business venture. Plus we have not included another $6,000.00 for a half decent peosumer HD camera with a few extras. I was trying to keep the entire setup to 8 to 10 grand total.. Not including the software / so this looks like wishfull thinking at best / Ho Ho.
b remember / unfortunately my pricing reflects Canadian $$ which includes a 25% hike in pricing because our government wants the loonie (Good Name) low valued so businesses can export our products at built in 25% Sale Pricing.
Perhaps,we wont get into that topic/please, but I just couldn't resist / when I start thinking about government issues (anywhere in this world) I tend to go off the deep end as part of why I am going into this video thing is to document the destruction of our environment & the entire democratic process, which is a total farce in my neck of the woods. Nuff Said..
Again Thanks for the input and I will keep watching and perhaps cover another topic later / my goal is to place an order for a build within the next 10 days of so.
B Orion

Similar Messages

  • NEED help on choosing a new VGA video CARD for 875pNEO-LRS mobo.

    I've purchase a GEforce4 MX440SE 4x/2x 128mb DDR (Taiwain base company made it)...however on their manual & web site..I cant find the voltage info. of it. Thats why I worry that if its not 1.5v 4x AGP card, I will ruin my new mobo.  My first question is that if there is a way that I can test the voltage of it.  I really dont want to wast the money I already spent on it.  However if its my only choice is to buy a different one ... Please post what type of Video CARD you guys are using for this mobo.  Your input will be much appreciate it.  

    Hi
    I'am using a Sapphire Radeon 9000 Atlantis PRO 128Mb on my mobo, works fine. One thing. Dont't use the drivers on the cd that comes with the card. Get the fresh stuff from ATI's site.
    MML

  • Early 2008 Video Card Replacement Question

    BACKGROUND
    Hardware Overview:
    Model Name:                       Mac Pro
    Model Identifier:                  MacPro3,1
    Processor Name:                  Quad-Core Intel Xeon
    Processor Speed:                  2.8 GHz
    Number of Processors:         2
    Total Number of Cores:        8
    L2 Cache (per Processor):     12 MB
    Memory:                               10 GB
    Bus Speed:                            1.6 GHz
    Boot ROM Version:                MP31.006C.B05
    SMC Version (system):          1.25f4
    NVIDIA GeForce 8800 GT:part number 630-9898
    Chipset Model:        NVIDIA GeForce 8800 GT
    Type:                       GPU
    Bus:                         PCIe
    Slot:                         Slot-1
    PCIe Lane Width:      x16
    VRAM (Total):           512 MB
    Vendor:                    NVIDIA (0x10de)
    Device ID:                 0x0611
    Revision ID:              0x00a2
    ROM Revision:          3233
    Displays:
    SyncMaster:
      Resolution:                       1920x 1200 @ 60 Hz
      Pixel Depth:                      32-BitColor (ARGB8888)
    SyncMaster:
      Resolution:                       1920x 1080 @ 60 Hz
      Pixel Depth:                      32-BitColor (ARGB8888)
    I run one XP drive for games (primarily Flight Simulators) and music/video (CD/DVD) conversion (Danisoft/SlyFox).  Mostly stuff that I have yet to find an equivalent that will run on Mac OS.  I run one drive with Lion: MSOffice for Mac, iTunes, iPhoto, iMovie, etc (main use drive).  I run one drive with Snow Leopard: still have some stuff that requires Rosetta but is little used.  (Thinking about creating a Snow Leopard partition on my Lion drive and using my current Snow Leopard drive for additional storage.)  I run one drive thatis purely storage.  Everything is backedup to a 2TB Time Capsule using Time Machine. Op systems also backed up to Hitachi 2TB G-Drive using Carbon CopyCloner as well as all important files backed up there as well.
    Video card failed.  Ifixed it using the ‘bake it in the oven’ trick. (http://www.youtube.com/watch?v=T7um_hZYom4)  However, still thinking about replacing the card.  There are three Apple part numbers foravailable/comparable video cards.
    630-9898 – This is the part number ofthe card currently installed.  Best pricefound is $586.37
    661-4642 – This card is listed as newwith no choke.  Best price found is$242.00.
    661-4854 – This card is listed as new‘with Choke’.  Best price found is$246.00.
    Then, I see where some are replacingthe NVIDIA cards with ATI’s.
    5770 – $249.00 from Apple.
    5870 – $449.00 from Apple.
    QUESTION
    Based on my current gaming on the XPdrive and the primary use of the Mac OS drives being general purpose (with moreand more getting into iPhoto and iMovie), what are the feelings of the community on which replacement vid card to purchase?  (Note: To date I have not had any issues with noise or smoothness using the 8800.  But who knows what I might want to do in the future and I want to be prepared as best Ican without spending the $1500 on that really high end card.)
    TIA

    You should look at those Apple version of the ATI Radeon 5770 and 5780 video cards.  They are the current mac pro cards but will work in 2008's.
    The 5770 requires one aux power cable and the 5870 requires two.  Both have two mini-displayports and a dual link DVI port.

  • Trouble with a new iPod video (and a question)

    My new iPod video is causing my computer to freeze when I connect it. I've tried uninstalling and reinstalling iTunes. After that, it seemed to be going OK, but it only downloaded about 500m (of a total of 50g) before iTunes froze again and stopped downloading (of course the "Do Not Disconnect" icon on the iPod stayed there, but I had no choice but to disconnect it!).
    All of my music is on an external Seagate hard drive coming in through one of my USB inputs. The iPod is on the other USB input. Could this be part of the problem? I don't think it's a drive letter issue since it did start downloading the last time before freezing.
    Also, I'm wondering if I can use my old firewire cable from my previous iPod to speed up the transfer process once I actually get the thing working.
    Any help would be much appreciated!

    See Here.  Apple ID: Contacting Apple for help with Apple ID account security
    Ask to speak with the Account Security Team...
    Or Email Here  >  Apple  Support  iTunes Store  Contact

  • K330 Video card upgrade question.

    New to forum and was just about to pull the trigger on a new K330-77471CU (from BB). However, I read a customers comment saying that this unit only had an AGP port, no PCI express slots for upgrading the video card, can this be true??? Does'nt seem possible today.  The desktop overall will fit my needs, but I want to make sure that if I elected to upgrade the video card someday, I could with the latest generation cards. 

    thanks for the reply Duck3. The above desktop is a new release for BB stores and features i3-2100 / 8mgs memory / 1 T HD. Not a high end unit by any means but one that you would think would allow the user to upgrade the integrated vid. card to a dedicated ........ hmmmm , I'm hoping perhaps a rep from Lenovo will jump in and clear this up so I can make a decision on this particular desktop.  I highly doubt our local BB sales rep is going to know the answer to this. These things just hit the shelves here. And yes, the customer was giving his review of the above mentioned model he just purchased.

  • Video Card Upgrade question

    I want to run Apple's new Apature program on my iMac. I currently do not have a video card that will allow me to run this program. Does anyone have any suggestions on the most versitile cost effective card for the G5. I also do a bit of editing and Photoshop.
    iMac G5 1.8   Mac OS X (10.4.3)  

    Hi,
    The iMac's videocard is soldered onto the mainboard and cannot be removed. Therefor, it can also not be upgraded.
    Sorry to bring you the bad news

  • In need of a new Graphics/Video card,..which one?

    My computer stopped booting all the way a couple of days ago. Took it to Apple store where they told me I need a new Graphics card. As of now I have:
    Chipset Model: NVIDIA GeForce 7300 GT
    Bus: PCIe
    PCIe Lane Width: x16
    VRAM (Total): 256 MB
    Vendor: NVIDIA (0x10de)
    ROM Revision: 3011
    Does anybody have a suggestion on which one to get?
    When it comes to that stuff, I have no clue which one is good/better etc.
    Any help would be appreciated. I would be willing to spend $250-$350 unless I get an amazing one for a bit higher.
    I don't do a lot of graphics work on the computer, but, I do like my computer games.
    I was looking at this on OWC:
    http://eshop.macsales.com/item/ATI%20Technologies/100435928/
    (ATI RADEON 3870 256-bit 512MB GDDR4 16x PCIe Video Card for the Mac Pro with two Dual-Link DVI Ports, supports two 30" displays! Supports HDMI output up to 1920x1080!)
    Thanks

    Then, if I look on comments on the Apple website, some people say it does work on older models, some say it does not because this card requires PCI Express 2.0??
    The card is PCI Express 2. Your Mac Pro has just standard PCI Express. However, that doesn't matter , since PCI Express 2 was designed to be compatible with standard PCI Express. Any PCI Express card (2.0 or not) can be used in any PCI Express slot (2.0 or not). Of course you only get 2.0 speed if the card and slot are both 2.0.
    PCI slot 1 (the lower slot) in your Mac Pro is a 16x slot, and will provide plenty of speed for the card. It is unlikely that an older Mac Pro could send data any faster than that slot could handle. The new Mac Pros have faster memory, and might be able to use the extra speed of PCI Express 2.0.

  • When will newer EVGA video cards be approved for Mercury Playback Engine GPU Acceleration?

    I built my system for video editing, Windows 7 Ultimate, i7 920Mhz, 24Gb RAM, ASUS Rampage III Extreme motherboard and EVGA GeForce GTX 570 video card. I decided to upgrade my video card to EVGA 660Ti with many more CUDA processors and 3GB memory, but when I rendered some video I got this message "The project was last used with Mercury Playback Engine GPU Acceleration, which is not available on this system. Mercury Playback Engine Software only will be used." and it seemed the rendering was slower. Even though the EVGA newer Video cards have more memory and processor power and more CUDA cores and score better on Windows Experience Intex, Adobe does not approve them and say they use Merecury Playback Engine GPU Acceleration. Why? The Quadro cards are much more expensive have less memory, fewer CUDA cores but are rated higher by Adobe for Premiere and rendering, why is that? What gives? Why are the EVGA cards that seem more powerful and less expensive rated lower than the Quadro cards? Will this ever change?

    LOL!
    Hunt

  • IMac 24 with Nvidia 7600...bad video card choice?

    Hi folks. I've had my iMac 24 incher for a few days now and I went to try one of my favorite game demos, Unreal Tournament 2004 and the performance I got from the video was a lot less than what I thought it would be. I have the game for my Windows machine which is a 3Ghz P4, 2GB RAM, GeForce 6600GT and the performance on that seems way better than my iMac. Why? I thought the video card it in was suppose to be pretty good (GeForce 7600GT 256mb). I changed the settings in UT to the native res of the mac but it didnt' help. Anything I can do about this? Thanks.

    He said that he was running the demo. I don't
    think
    this has been updated to universal binary.
    It has been updated. Do a search on versiontracker.
    Do you mean this?
    http://www.versiontracker.com/dyn/moreinfo/macosx/22450
    Versiontracker screwed up again. This is a patch that updates the retail release of UT 2004 for Mac to version 3369.2. It isn't the demo. The demo weighs in at nearly 600 MB. If you have a link to a download of an actual UB demo of UT 2004, please feel free to share.
    20" iMac CD (early '06)   Mac OS X (10.4.7)  

  • 600 watt power supply questions and video card upgrade questions

    I am looking to upgrade to a Xfx Radeon 7970 Double D graphics card but i was wondering if the HP 600w psu that came with my Hp Envy Phoenix H9-1350 has a 8 pin and 6 pin Pci-e connector because that is what the Radeon 7970 needs. Also I am wondering if it will fit into the Hp Envy Phoenix H9-1350 because the case seems small but the card is only 9.3" long. I currently have an Amd Radeon 7670 but I think it is time for an upgrade but I am just not sure if the power supply has the correct power connections needed for the Radeon 7970.
    This is the card I am looking to get:
    http://www.newegg.com/Product/Product.aspx?Item=N8​2E16814150665
    This is the computer I have:
    http://www.bestbuy.com/site/HP+-+ENVY+Phoenix+Desk​top+-+12GB+Memory+-+2TB+Hard+Drive/6890832.p?id=12​...

    I understand you want to know if the power supply will have the necessary connectors for the desired video card.
    According to the specifications, it lists the case as a mini-tower which is on the small side.  You may need to use a tape measure to find out exactly how much room the system has in regards to length.  It has become much better, but other components (such as the HDD) were at the end of the PCIe slot limiting the length of a video card.  Sorry I couldn't provide anything more specific.  The manuals are somewhat vague as far as the internal dimensions and I don't have access to one to verify the dimensions.  
    Ordinarily, I can find more information regarding the power supply not that seems not to be the case here.  According to this thread, the PSU has two 6 pin PCIe connectors.  You would need something like this to convert one of the 6pin connectors to 8pin.  As long as the PSU is capable of pushing enough watts, it shouldn't be an issue.  The card needs up to a 500W power supply, so the 600W power supply should be just enough to cover it.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • [SOLVED] video card support question

    Hi Everyone,
    I need to get my dad a new pc with a simple (newbee) linux distro on it and I was thinking of something like mint. He has been using Ubuntu the last 2 years but for some reasons we want to switch. I'm a very satisfied arch user but this is way over his head.
    I'm looking for a system without windows and found something with the following specs:
    Cardreaders     3,5" Spire 51-in-1 zwart
    Processor     AM3 AMD Athlon2 X2 255 65W 3.10GHz / BOX
    Motherboard     Biostar AM3 N68S3+ V/S/L/µATX/DDR3
    RAM                     2048MB DDR3/1333 Kingston CL9
    Graphics        5450 ATI HIS HD 5450 Silence VGA/DVI/HDMI/GDDR3 1024MB
    HDD             500GB Samsung HD502HJ SATA/16MB/7200rpm
    Housing       Codegen P6232-A11 460 Watt / zwart-zilver
    DVD-Burner     Samsung SH-222AB 22x SATA / bulk / zwart
    DVD-player     Sony Optiarc 18x/48x SATA / bulk / zwart
    I'm somewhat worried about the graphics card and after browsing the forums I can't get a satisfying answer whether the card will work with or without problems if at all. Can anyone help out or give some advise?
    Thanx a bunch.
    Last edited by billy-bones (2011-06-10 22:30:53)

    billy-bones wrote:
    karol wrote:
    billy-bones wrote:He is not going to do any heavy gaming and such.
    So why do you need 1 GB RAM card?
    He want's do edit video's and work more intensively with multimedia.
    I would suggest getting some more RAM.
    https://bbs.archlinux.org/viewtopic.php … 97#p934697
    Maybe you can ask mhertz some specific questions as he seems to have a 5450 too. Judging from this one post the situation doesn't seem bad.

  • Dual Video Cards Setup Question & where is MRQ?

    Ok, I have two question. First is that I have a Quadro CX and GeForce 9800 GT and was wondering if there is any special thing I need to do to have PPro CS4 take advantage from the Quadro. From my understanding it automatically picks it up and uses it but do I need to have my monitor running from the Quadro or should I have it run from the 9800 GT? Also, when I render I notice that when I do playback in PPro, the encoding pauses and resumes once I'm done previewing whatever in PPro. I would think that I should be able to preview being plugged into the 9800GT and have that drive the preview while the encoding will use the Quadro CX. Am I missing something here or is that a large programming undertaking? I would think it wouldn't be that difficult.
    Second question is that I've had some pretty rough edges on my output video. The output video is 192x192 FLV On2 Vp6 and the source is 1080 HDV. I've heard that the Maximum Resolution Quality should be turned on. I've poked around and I'm unable to find this and was hoping I could get some help here on the forums. I'm pretty new to this editing thing, but my work gave me a freak'n sweet setup, and I'm just trying to optimize and get things working smoothly. I appreciate all your help in advance. I'm glad to become a part of the community.
    Cheers,
    Drew

  • Video card options question.

    Hello guys, i'm wondering if u can configure your video options like on a PC. I'm using a 15"MPB, when i'm playing WC3 online, it seems so laggy.
    I'm new to Mac computers, please help out.
    Thanks in advance!

    Of course, the most control will be via the in-game settings. But also, there is a tool from ATI called ATI displays. Using it, you can force games to use FSAA and Antistropic filtering (among others), or you can force them to not use those things. However, I'm not sure if this software is compatible with the Intel Macs, as I haven't tried it myself. You can try it if you like: https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&folder ID=27

  • New Member but with a question about my Predator and erecovery disks

    So far I have tried several routes to recover my Predator AG-3620 desktop and so far it's been a "fail"each time. Originally tried to go with the recovery from the USB (will not accept USB for some odd reason),then decided, okay, let's get the erecovery disks from Acer (system specific) and they arrive scratched. Nogo there,...Acer sends a second good set and I go about the recovery steps and get a "Install incomplete. Windowsfailed to fully,..." Sooo, figure okay MAYBE, just maybe, it's the HDD,...go get a NEW HDD, and attempt anotherrun of restore,...again, no go. By this time I am really flustered,...(I've done recoveries on other systems, noproblem) SO I come up on Acer community in the Predator (Gamers) area and get a few good Ideas,...but nonehelp as I still have a dead (in my mind, you can't use it, it's dead) desktop that is a FANTASTIC system,...butnow I am having to resort to using the wife's laptop to look for ANY way I can get my system back up andrunning. I have checked cables, memory, and even gone the Ubutu route and Microsoft sys software down loadjust to get to Windows so I can get that puppy up and going again.  ANY help is appreciated at this point and I mean ANY!!! Please save me from this Compac Celeron Laptop I amhaving to deal with in the meantime!!!

    Hiya!
     It would only use data when either you initiate the data (either connecting to the browser or other apps, or manually poll your email) or when your device pulls the email.
    Now there are many variables to how much data is used, but in my travels of the interwebs, I have come across This data calculator which should help a bit. I'm with Rogers and don't use that carrier, but the tool works nonetheless.
    Hope that helps
    1). Please thank those who help you by clicking the beside the 'Reply' button.
    2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
    3). Remember to have fun! We are all in this together!
    4). Follow me on

  • Video card to cupertino2 mother board

    Cheers!
    I´ve got a HP Pavilion p6-2055sc with a motherboard cupertino2-H61-ua-TX, and i3 processor 2120. I am about to upgrade to a core i5-2500k. I am also considering a new graphics/video card compatible with the mother board. I am not looking for a high end graphics/video card since this would cost to much, require doing something about the power supply, etc (and thus I guess I could go for a new computer altogether). Do you know of an "affordable" and compatible card better than the nvidia gforce 520?
    /Coggers
    This question was solved.
    View Solution.

    What is your BIOS revision? If it's 7, ok.  If it's 8, your into UEFI.  It's possible to get GPU's that do not have UEFI requirements.  Some readings to understand why WIN8 and UEFI are the newer system.
    If you can get over the PSU hurdle, look at this UK seller for example.  Corsair 600W
    If you go to this site, you can run various configurations.  I took the liberty of linking "Assassins Creed IV".  You enter various specs, and it gives you "values" based on these specs.  If you want to enter a different game, either google into the site with that game name, or use the "Can I Run It" tab.  Then you need an account, but it's free.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

Maybe you are looking for