New objects not appearing in Integration Directory

Created two new Message Interfaces and they aren't appearing in the Integration Directory when I create my Interface Determination. I copied an Interface that was appearing and the copy isn't showing either.
I've checked the change lists in both systems and nothing is left to activate. I just wanted some suggestions as to what else I should check.
Many thanks in advance.

Thanks I performed a cache refresh using SXI_CACHE and there aren't any changes are waiting to be activated.
With regards to the selection you can't delete the 'query' and select all. The select interface dialog just has a list of the interfaces available and an OK or CANCEL box.
What is also interesting is that two interfaces that were deleted earlier today are showing in the list.

Similar Messages

Context Object not found in Integration Directory

Hi experts,
I am trying to do a content based routing scenario using BPM.
The Scenario is
ASYNC -> SYNC -> ASYNC
The synchronous step here refers to a rfc call. The response from this determines the ASYNC systems to which data should be sent.
I have declared container objects REQ and RESP accordingly in the BPM. Also have a Context object for the response.
My issue is, while doing receiver determination, I am unable to find neither RESP message type ( for XPATH ) nor a context object declared in ESR for creating an expression.
Could someone please help/guide me to resolve this.
Please let me know if I was not clear.
Thank you.

Hi,
I am on 7.11.
The problem I am facing is that I am unable to find the corresponding structure to be used for XPATH.
As mentioned, the scenario is
ASYNC -> SYNC -> ASYNC's.
I have two container variables : REq and RESP. RESP is populated after the SYNC call. The message type for the subsequent ASYNC is REQ ( step description ).
So when I do receiver determination for ASYNC, I am able to see only REQ message type for building the expression. ( Obvious )
But I would need RESP to build it.
Please advise.

Design Objects created in Enterprise Services Builder not appearing in Integration Builder

I am fairly new to PI, so hoping someone can help. I have created a number of design objects (DataType, MessageType, ServiceInterface, MessageMapping, OperationMapping). I had also imported an RFC object successfully as well that is used in the creation of the design objects. All have been saved and activated, and there are no apparent errors listed.
After saving and activating the objects, I went into Integration Builder, and created a new Configuration Scenario. However, when trying to add in the Interface Determination, Receiver Determination, Sender Agreement, and Receiver Agreement, I do not see the the RFC object or design objects that were created in the Enterprise Services Builder.
Can someone advise as to whether or not I have missed a step somewhere? Or perhaps there is something else that I need to do before I can get the design objects and imported RFC object to appear in the Integration Builder?.
Thanks in advance.
Tuan.

Hi Tuan,
Are you using Business System or Business Component. If your using Business System you need to assign Software Component Version to Business System in SLD. If your using Business Component you have to add the Interface Name Manually to the Business Component. Please see the Below screen shot, you have to add Sender or Receiver Interface manually to proceed further step.
Thanks,
Satish.

Business systems defined in SLD not visible in Integration Directory.

Hi,
After having finished with the SLD configuration involving defining the product, software component, TS and BS. Then I imported in the Integration Repository from SLD and then defined message interfaces, types etc. After that, in Integration Directory when I am trying to assign new business system (to expose business system of sld as service), it is not showing me the newly defined business systems of SLD in the Integration directory.
Please suggest me a possible solution for this.
Thanks,
noor

Hi,
It happens sometimes due to Meta Data Issue,
Go for SLD Cache :
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
Still If you are not able to see the Business System when trying to import the business system. Go to Objects tab in ID --> Business System and you will find the imported Business System --> Right Click and ADD to Scenario.
Regards
Agasthuri Doss

Adapter engine not found in Integration Directory

Hello All,
We are having a new server installation. The problem I am having is in Integratin Directory --> Communication Channel, no option for Adapter Engine is present in the drop down. I have checked the following options:
1) SAP BASIS Component with Adapter Mata data is present in Repository.
2) In SLD, Content Maintenance, class XI Integration Server. There are 3 associated objects (the last column). XI Sub-System viewed application system is also present.
3) The Technical and Business Systems are already created for XI Integration Server in SLD.
I have also suggested the blog /people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory , to the Basis team, however the problem still persits.
Kindly suggest how we can resolve the issue and start executing our scenarios.
Regards
Pravesh
Edited by: Pravesh Sharma on Mar 9, 2009 10:11 AM
Edited by: Pravesh Sharma on Mar 9, 2009 10:12 AM

Hello,
I think the BASIS Team has gone through or implemented this OSS note as it is mention in the blog above. However the problem still persists.
Regards
Pravesh

Business system from SLD not visible in Integration Directory

Hi,
As on the project I do not have access to the SLD, another team created new business systems there. However, when I try in the Integration Builder(Configuration) to assign the newly created systems, I cannot see them on the "Select business systems" page.
What do you think might be the cause of that? (the SLD and the XI systems are fully customized and have been used successfully until now)
Thanks in advance,
George

Hi,
In Integration directory -> Environment(Menu) ->
Click on Clear SLD Data cache and try again.
If you are unable to get even after doing above step check whether cache is up to date or do full cache refresh. This will solve your problem.
Regards,
Sakthi

Business system is not displaying in Integration Directory

Hi Friends,
i'm doing RFC to RFC scenario.. here.. upto IR(Integration Repository ) i did every thing fine.. but in ID(Integration Directory ) for assiging business systems i did't get one business systesm. in SLD part every thing i'm getting.. but here for adding the system into my scenario only i'm not getting particular one business system in OBJECTS list...
is it any authorisation problem... because for other users it was getting .. plz suggest me the solution.. for getting
thanks
Babu

Hi Babu,
Once the business system is imported from sld then you can assign that business system in any number of scenarios. You are telling tat other users are using it and if so then it should be listed in the object list..check if any one might have deleted the business system instead of removing from their scenario...and if so...you can see the business system in the imported objects from sld.
Thanks,
Prasanthi.

New field not appearing in component configuration for standard web dypro

I'm trying to add a new column to a table in an sap web dynpro component. I've enhanced the view to add in the new column but also noticed that it's using component configuration. When I go into the approriate configuration, however, all of the existing columns are there but my new column does not appear. Is there something else I need to do to pull the new field into the configuration?
thanks,
Malcolm.

Hi Olivier
Standard object 0020 gives fields only available in standard tables MARA , MARC , MBEW, MAKT . I too faced this problem for ML based fields in accounting & costing views ( as these fields are not in MBEW they are in CKMLHD). The said Z field if it does not exist in MARC it cannot be seen through std object. U need to do a saperate recording to upload this field. I dont see any other option to my knowledge.U can up load remaing fields through the std object 0020 & create a saperate recorded LSMW only for this Z field.
regards
prasad
reward if useful

Objects not appearing in build list

Thanks for reading...
I recently downloaded Keynote 3.0 and successfully converted a MS Powerpoint file to Keynote. However, some of the objects are not appearing on my build list. Furthermore, when I try to edit the slide with "new" text, etc they still are not on the build list.
I have tried Web searches and downloaded the manual without resolution of the problem. Any help would be greatly appreciated.
G5 & iBook (G4) Mac OS X (10.4.5)

Joeldn,
welcome to Apple Discussions.
I think it's difficult to help you withoutaccess to your particular file. If you could send me the Powerpoint, I would convert it and try to see what happens.
If it's okay with you, send the file to mre3 (at) mac (dot) com.

New window not appearing

While working on Oracle Discoverer. When the user opens a report and clicks on the search button a new window should appear but it doesn't.

Any JavaScript errors in the Web Console (Firefox/Tools > Web Developer) about this?
You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Interface Mapping Not Found in Integration Directory

Hey guys!
I'am getting this error in the test configuration part of the integration directory:
"Interface Mapping: <Not Found> com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping"
I don't see why I should be getting this error since I have properly defined a message and interface mapping for the receiving interface.
BTW, I get this error when I use XSLT mapping. If I point my interface mapping to a normal message mapping, I get no error. Is there anything I am missing?
Regards,
Glenn

The weird thing is that when I test the the configuration in the Integration Directory, it is still looking for my old message mapping (the one i created using xi editor) even though I already replaced the referenced message mapping in the interface mapping to the XSL one.
Yes, I tested the interface mapping with the same data using the XSL mapping and there's no problem.
When I send the message though, I get an error saying "NO_RECEIVER_CASE_ASYNC" I really don't see why it should not recognize the receiver. I tried refreshing the cache but it still looks for my old mapping program...
:P

SLD Business system not appearinn in Integration Directory Configuration

Hello,
I have configured a business system in SLD(defined a Technical system,assigned it to a business system),but when i go to
Integration directory and assign a business system without a partner,I am not able to see this business system.
can any one please help.
regards
kaushik

environment -> clear SLD cache

Timed objects not appearing

Captivate 7 (Windows 8) - I have added a number of images and smart shapes to slides and changed the timing so that they appear at different places in the slide. Some have limited duration and some last till the end of the slide. Everything works fine when I preview the slide (F3). However, when I preview any other way (5 slides, from this slide, project, in browser) or publish, then those objects do not appear on the slide.
I am able to add highlight boxes OK and change the timing, but not smart shapes or images. If the timing is anything other than the full duration, then they do not appear.
I have checked the objects to ensure they are visible, I have cleared my Captivate Cache, I have duplicated the affected slides.
Any ideas?

What Vikram is hinting at I believe is that your image button is pausing the slide before your other objects appear.
F3 is not a publish preview. It just plays the timeline in Edit mode but interactive objects do not pause the timeline in that mode. When you actually publish for real, at run-time these objects will pause the timeline, which is probably causing you to not see objects that would be added to the screen AFTER the image button's pause point.

New lot not appearing in qa32 - v urgent

Hi all,
I have an urgent issue to resolve. we have developed a report that shows those batches
-for which UD has been done 8 days before but no despatch till date OR
-for which no UD has been done and date of production is 8 days before from today.
User wants that a new lot for above batches should appear for UD again in qa32.
For this i have defined procedure as:
1. Run REPORT Which will identify batches older than 8 days (from the days of production or last UD date).
2.Go to QA07 Enter material codes, Batch numbers, and plant and select the option of Block Batch at lot creation.This will transfer all the mentioned batches to blocked stock and create an inspection lot automatically.simultaneously an inspection lot will start appearing in transaction QA32, against this batch for inspection.
Now the issue is that after QA07, I can see in mb52 that stock of the batch move to restricted, but no inspection lot appears in qa32. a new inspection lot should appear in qa32.
any ideas ? have i missed anything? i have also done changes in inspection plan,
cant figure out what i missed. pls respond.
Regards,
Aisha Ishrat
ICI Pakistan Ltd.

Let me simplify my question:
i have some batches in system for which UD had been done 8 days
before but no despatch has been done against those batches.User
want to give UD again for those batches.
what i advised him to change the inspection plan of those
materials by putting '9' in 'usage' and '4'in 'status' fields in
qp01 and then go to qa07 and enter material codes, Batch
numbers, and plant and select the option of Block Batch at lot
creation.The batches automatically transferred to blocked stock.
Now the issue is that after batches transferrence to block stock,
new lot should appear in qa32 but its not appearing.any ideas??
Have I missed any thing? Kindly give a prompt reply.

New EIT Not appearing for Organization classification

Hi all,
I have set up a new EIT for the organization. I have run the scripts for populatting
the information_type in the hr_org_information_types table and also hr_org_info_types_by_class but the new EIT is not appearing in the new classification.
Can someone help me as to what I have missed out.
Thanks
Shekar.

Shekar,
1. Oracle HRMS Configuring, Reporting, and System Administration Guide (A95418-02)
Setting Up Extra Information Types for an Organization Classification
2. Note 70122.1 -> EIT: Extra Information Type Issues
3. Note 267462.1 -> Organization EIT Not Displayed
Regards,
Greg

New objects not appearing in Integration Directory

Similar Messages

Maybe you are looking for