New Printout message for Consignment Process

Hello,
I use MRKO for consignment settlement.
However I created a new condition type ZKON by copy of KONS to print out the consignment document.
In message schemas for message MR0003 (Consignment) I created a new line with priority for this new condition type:
1     0     ZKON [Edited by: RMC on Nov 25, 2008 4:01 PM]     Consignment
10     0     KON6     Consignment  EDI
20     0     KONS     Consignment
I created in MRM1 the condition type by vendor and company code.
However when I'm trying to print out the document only standard condition type KONS is available and assigned to my consignment documents. No message for condition ZKON is generated.
Can you help me on this? How can I have the print out for the new condition type?
Edited by: RMC on Nov 25, 2008 4:02 PM

You need to go to the transaction NACE and compare the set up of the output type not working to the set up of the output type that is working.  I recently had this happen and the set up was missing under PROCEDURES-> CONTROL.
Another area to look at is the condition record when you set it up by company code or supplier... make sure the communications screen is set up as well. 
Sandra

Similar Messages

  • "DD8x". Error message for loading process:Operating system error !

    Using the OLE command I receive the following error:
    Cannot load the file "File Name" with the loading process "DD8x". Error message for loading process:
    Operating system error <> !
    strCommand ="DATAFILEIMPORT('J:\ctf\GM\040119-2\dat7.dat','',0)"
    lsuccess = IDIACommand.CmdExecuteSync(strCommand)
    I get the same error with the "DataLoadHdFile" command.
    After the error happens, I cannot load any files in the directory until I
    reboot DIAdem.

    Hi punkmonkey,
    I'm curious why you compare the results of the "DataLoadHdFile" command with that of the "DataFileImport" command. The former is a time-honored DAT-file-specific command for only reading the header file contents-- NOT the data, and the latter is a brand new DIAdem 9.0 function for loading all sorts of data files-- TDM files included.
    If you want to load a DAT file using an OLE command, why don't you try the time-honored "DataLoad" command, which is specifically designed for loading DAT files? The "DataLoadHdFile" command is really only used to do selective loading (specific channels or rows) of part of a DAT file. Do you want to load selectively, or do you want to load all the channels from the DAT file?
    When you get the same error with
    the "DataLoadHdFile" command, are you executing that command also through OLE automation, or directly in DIAdem? What happens if you try both the "DataLoadHdFile" and the "DataFileImport" commands directly from DIAdem (no OLE)?
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • GR out put error :No messages for initial processing exist

    Hi All
    When Im process the out put for GR using T-Code MB90, the following message appears and I'm able to see the out put "No messages for initial processing exist".I have checked the three processing modes even it is giving the same mesaage.Can any body help  to how to see the GR out put.
    thanks and regards,
    Sri.........

    Hi ,
    I think the necessary condition records might not exist.
    You can maintain the same using MN21.
    Also check whether the necessary customising is done using Transaction NACE and by selecting application ME.
    Regards
    Ramesh Ch

  • No messages for initial processing exist in MB90

    Hi friends,
       When i try to take print from MB90 the error "No messages for initial processing exist" for Goods receipt --> others MIGO.
         I maintanin the Print controls in SPRO --> MM --> IM --> Print Control.
          Please help me in this issue.
    Regards,
    Mahi

    Hi Anbalagan,
       Thanks for your Reply.
      Here MM consultant is now not available thats why i post question here.
      Personally i check some forms are assigned to Material document. But i know some is to be configured. but i dont know what it is. If you know the procedures please guide me.
    With Regards,
    Mahi.

  • Std. WF/Bo for consignment process in Sales?

    Hi Friends,
    Is  there any std. WF/Bo for consignment process in Sales?. I will definitly award points for any useful hits.
    Thanks
    Nash

    It should be the same BUS2032, it's basically the doc type which differs.
    Regards, IA

  • VF31 : No messages for initial processing exist

    Hi everybody,
    I have a problem when i want to print an invoice from Tcode VF31
    i enter the required fields and i excute but i have this message :
    "No messages for initial processing exist".
    in Tcode V/40 i had already the output type maintened.
    Please how to solve that
    I need ur help
    Regards.

    Hello,
    try to print it from VF02  transaction
    BR Tarik

  • No messages for repeat processing exist

    Hi All,
    I have been trying to print Intercompany invoices via VF31 using the Output type ZB3I, but I keep getting the following message.
    No messages for repeat processing exist
    Message no. VN109
    Plz guide me.
    Regards,
    Mahavir

    Provide following the input screen for VF31
    - Output Type
    ZB3I
    - Transmission Medium
    1-Print output
    - Processing mode
    2-Repeat processing
    and Billing Doc or range of billing doc to print.
    Regards
    JP

  • No messages for initial processing exist

    Hi All,
    When I use Migo to post GR or GI, I use MB90 to print Output from  Goods Movements but I receive a message "No messages for initial processing exist".
    I must use MB02 to assigned document number to output form.
    How can I set GR auto assign to form A, or GI auto assign to form B ?
    Thanks !

    Check this answered link [No messages for initial processing exist |MB90 (Output from Goods Movements)]

  • VL74-No messages for initial processing exist

    Hello All,
    At the time of executing tcode VL74 i am getting the following message
    No messages for initial processing exist
    Message no. VN108
    Could anyone please let me know what settings I need to maintain for the same, I have maintained the output type determination procedure and also maintained condition records for the same besides assigning output type in the required output procedure.
    Kind Regards
    Atul Keshav.

    Hello Atul,
    You need to check 2 things:
    - In TCode NACE, Application: V6-Handling Units, your output type should be active for Multiple issuing in General Data tab,
    - In TCode VL74 overview. the input parameters for processing mode should be 2 - Repeat processing which 1 by default
    Thanks & Regards
    JP

  • Unable to generate message for Consignment Note

    Dear all,
    I would like to print Consignment Note from MR91, but the system issue message - "No message for initial / repeated processing exist", does anyone know how to solve this issue?
    Do I miss out any setting in IMG or it is due to program error? My application release (SAP_APPL) is 470.
    Thanks.
    Data selection
    Output type = KONS
    Sort order = 01
    Processing mode = 1 or 2
    Document number = 51xxxxxxxx
    Fiscal year = xxxx
    Comany code = xxxx

    Hi LOI ,
    At first check whether the condition records are maintained. If it doesn't exist , maintain the same using MRM1 Transaction.
    Goto Transaction NACE and Click on Application MR and then o/p types.
    Check whether KONS is cofigured properly.
    Regards
    Ramesh Ch

  • FM to create support message for custom process type other than 'SLFN'

    Hi All
    Is there any function module or BAPI which will create support message for the custom process type other than SLFN.
    BAPI_NOTIFICATION_CREATE is posting only for the process type 'SLFN'
    Thanks in advance
    Regards
    Ravi

    Any ideas?

  • Help in forming SOAP message for Bpel process

    Hi,
    I have a following schema file - UnpackMessage.xsd
    <?xml version="1.0" encoding="windows-1252"?>
    <schema xmlns="http://www.w3.org/2001/XMLSchema"
    targetNamespace="http://www.w3.org/2001/XMLSchema/UnpackMessage"
    xmlns:tns="http://www.w3.org/2001/XMLSchema/UnpackMessage"
    elementFormDefault="qualified">
    <complexType name="PackHandlerProcessRequestType">
    <sequence>
    <element name="instanceId" type="string"/>
    <element name="activityName" type="string"/>
    <element name="result" type="string"/>
    </sequence>
    </complexType>
    <element name="PackHandlerProcessRequest" type="tns:PackHandlerProcessRequestType"/>
    </schema>
    and the following wsdl file for a bpel process
    <?xml version = '1.0' encoding = 'UTF-8'?>
    <definitions name="PackManagerWSDL"
    targetNamespace="http://xmlns.oracle.com/PackManager"
    xmlns="http://schemas.xmlsoap.org/wsdl/"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
    xmlns:client="http://xmlns.oracle.com/PackManager"
    xmlns:tns="http://xmlns.oracle.com/PackManager"
    xmlns:ns2="urn:UnpackHandler"
    xmlns:ns3="http://www.w3.org/2001/XMLSchema/UnpackMessage">
    <types>
    <schema attributeFormDefault="qualified" elementFormDefault="qualified"
    targetNamespace="http://xmlns.oracle.com/PackManager"
    xmlns="http://www.w3.org/2001/XMLSchema"
    >
    <import namespace="http://www.w3.org/2001/XMLSchema/UnpackMessage" schemaLocation="UnpackMessage.xsd"/>
    <element name="PackManagerProcessResponse">
    <complexType>
    <sequence>
    <element name="result" type="string"/>
    </sequence>
    </complexType>
    </element>
    </schema>
    </types>
    <message name="PackManagerRequestMessage">
    <part name="payload" type="ns3:PackHandlerProcessRequestType"/>
    </message>
    <message name="PackManagerResponseMessage">
    <part name="payload" element="client:PackManagerProcessResponse"/>
    </message>
    <portType name="PackManager">
    <operation name="initiate">
    <input message="client:PackManagerRequestMessage"/>
    </operation>
    </portType>
    <portType name="PackManagerCallback">
    <operation name="onResult">
    <input message="client:PackManagerResponseMessage"/>
    </operation>
    </portType>
    <plnk:partnerLinkType name="PackManager">
    <plnk:role name="PackManagerProvider">
    <plnk:portType name="client:PackManager"/>
    </plnk:role>
    <plnk:role name="PackManagerRequester">
    <plnk:portType name="client:PackManagerCallback"/>
    </plnk:role>
    </plnk:partnerLinkType>
    </definitions>
    The receive activity in bpel process expects input message "PackManagerRequestMessage" of type "PackHandlerProcessRequestType"
    Now on invoking the Bpel process directly by using the console ... the default input to the process looks like this -
    <payload xmlns="" xmlns:def="http://www.w3.org/2001/XMLSchema/UnpackMessage"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:type="def:PackHandlerProcessRequestType">
    <instanceId xmlns="http://www.w3.org/2001/XMLSchema/UnpackMessage">600</instanceId>
    <activityName xmlns="http://www.w3.org/2001/XMLSchema/UnpackMessage">receive</activityName>
    <result xmlns="http://www.w3.org/2001/XMLSchema/UnpackMessage">ok</result>
    </payload>
    and the receive activity gets the following as input (as taken from Flow in bpel console)
    <ReceiveInput_initiate_InputVariable>
         <part name="payload" >
              <payload xsi:type="def:PackHandlerProcessRequestType" >
                   <instanceId>800</instanceId>
                   <activityName>receive</activityName>
                   <result/>
              </payload>
         </part>
    </ReceiveInput_initiate_InputVariable>
    But when i invoke the same process using a SOAP message which looks like
    <?xml version = "1.0" encoding = "UTF-8"?>
    <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns2="http://www.w3.org/2001/XMLSchema/UnpackMessage" xmlns:xsd="http://www.w3.org/1999/XMLSchema">
    <SOAP:Body>
    <payload xmlns="" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="def:PackHandlerProcessRequestType">
    <ns2:instanceId>600</ns2:instanceId>
    <ns2:activityName>receive</ns2:activityName>
    <ns2:result>OK</ns2:result>
    </payload>
    </SOAP:Body>
    </SOAP:Envelope>
    the receive activity now gets the following as input (taken from Flow in bpel console)
    <ReceiveInput_initiate_InputVariable>
    <part name="payload">
    <ns1:instanceId>600</ns1:instanceId>
    </part>
    </ReceiveInput_initiate_InputVariable>
    So i am losing input data. Can someone help me form appropriate SOAP message for this ?
    Thanks,
    Srini

    Thanks Marc,
    The SoapUI is really useful. The SOAP request as generated by the SoapUI for above case is
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:add="http://schemas.xmlsoap.org/ws/2003/03/addressing" xmlns:pack="http://xmlns.oracle.com/PackManager" xmlns:unp="http://www.w3.org/2001/XMLSchema/UnpackMessage">
    <soapenv:Body>
    <pack:initiate>
    <payload>
    <unp:instanceId>800</unp:instanceId>
    <unp:activityName>receive</unp:activityName>
    <unp:result/>
    </payload>
    </pack:initiate>
    </soapenv:Body>
    </soapenv:Envelope>
    and the input received at BPEL was as expected.
    Thanks a lot.
    Srini.

  • Standard Smartform for consignment process or Invoice verification

    Hi All,
               What is the standard smartform for Invoice verification
    or consignment process.

    hi,
    check these.
    LB_BIL_INVOICE     Invoice     Standard Form
    SF_LB_INVOICE     Invoice     Standard Form

  • No messages for initial processing exist-- GR

    i am trying to take print out for GR document
    but getting the above said error message
    these are the settings which i have already done
    assigned user parameter NDR ,
    created a condition record for message type wee1 thru MN21,NACE
    chcked in the table TNAPR ....for and programe is coming there with output type please suggest
    Edited by: Sap: IN on Jun 3, 2009 9:45 AM

    Hi ,
    The condition types are linked to procedure under the below path ;
    SPRO Materials ManagementInventory Management and Physical InventoryOutput DeterminationMaintain Output Determination Procedures
    Did you create a new message type or using the standard one "WE01 " .
    As per my understanding Message determination of PO is never assigned to document type .
    U only maintain condition records through document type .
    Just check whether u were able to enter the message type manually and process the o/p.
    If yes , then there might be a problem with ur condition records.
    Regards
    Ramesh Ch

  • New SSL certificate for M670 process?

    Can someone help me with the current process for installing a new certificate on an M670 running 8.1.0-476?  Do I still use OPENSSL to generate the private key, and then get the certificate signed and import the certificate via CLI, pem format?
    Can I install a SAN certificate?  I have one DNS name spam.domain.com for the two (internal and external) SPAM quarantine interfaces and another name mspam.domain.com for the management interface.
    Appreciate the input, I only do this every three years and the process has changed the last two times and I find nothing in the documentation. 
    Jason

    Jason -
    You can use a SAN certificate - as long as the machine names are specified and signed off in the cert by your signer.
    Had previous saved notes for similar questions in the past --- see if this helps:
    For full create and install:
    http://tools.cisco.com/squish/39054
    Starting with AsyncOS version 7.1 it is possible to generate a self-signing request on the ESA appliance. This can be used as a workaround to create certificates for SMAs.
    On an ESA, create a self-signed certificate that will be used for the SMA. This can be done under GUI: Network > Certificates
    Detailed description how to generate a certificate can be found within the knowledge base article 1634.
    It is important, when creating a certificate, for common name to use the hostname of the SMA (M-Series) and not of the ESA (C-Series), so that the certificate can be properly used. Submit and commit changes.
    Use GUI: Network > Certificates > Export Certificates to export certificate.
    Give it a file name (e.g. mycert) and password that will be used when converting the certificate. Exported certificate will be in .pfx format. The M-Series only supports .pem format for importing, so this certificate needs to be converted.
    To convert certificate from .pfx format to .pem format, please use the following OpenSSL syntax:
    openssl pkcs12 -in mycert.pfx -out mycert.pem -nodes
    Windows version of OpenSSL can be downloaded from:http://www.slproweb.com/products/Win32OpenSSL.html  Make sure Visual C++ 2008 Redistributable is installed first before the OpenSSL Win32.
    Versions for Mac, Linux, and other operation systems can be downloaded from http://www.openssl.org/source/
    After converting the certificate to the correct format, one should now have available both - the certificate and the corresponding key in .pem format. It is recommended to sign it by a trusted Certification Authority (CA). Cisco doesn't recommend a specific CA, this is up to the choice of the customer.
    To have this signed, simply select "Download certificate signing request" in the GUI of the ESA (Network > Certificates >select the corresponding certificate created for the SMA) and submit it to the trusted CA of choice.
    The signed certificate or the self-signed certificate, and the key in .pem format, can be imported now in the SMA. To learn how to do it, please use the corresponding Installing Certificates on an IronPort Email Security Appliance.
    Let me know!
    -Robert

Maybe you are looking for

  • Error in appdstln.sql during upgrade to 12.1.1

    Hi All, I am upgrading my 11.5.9 ebs to 12.1.1 I have gone through all steps outlined in chapter 3 of Oracle® E-Business Suite Upgrade Guide Release 11i to 12.1.3 Part No. E16342-03. I am now in point number 10 under " Perform the Upgrade" i.e : Run

  • I need a date

    I'm trying to pull a date out of a MS SQL 2000 db and make it readable and place it onto a webpage. What's the best way to separate and obtain the day, the month, and the year from the db retrievel. And once I have those three separate objects, shoul

  • Apple Pro Video Formats 2.0 pkg update for Mac-any issues?

    I have a software update prompt from apple that an update is available for Apple Pro Video Formats 2.0. Mac Pro Tower - Mid 2010 OS 10.8.5 Anyone done this? Are there any issues? What about sharing files exported from my Mac with others using Windows

  • Why can't I find and open a text layer on photo (psd file) for editing using an iMac?

    When I open Photoshop Elements 10 Editor to edit a text layer on a 511KB 412x292 psd photo the text layer is not shown.  How do I open the text layer?  How do I edit the text layer?  How do I save the finished work product?  The background layer is l

  • EIS - OLAP Model - Dimension Joins

    Hi, I know the in EIS OLAP model we need to build a logical STAR schema between dimensions and fact tables with some join condition. Now, can you tell me how the join works while building the dimensions? Do EIS really bother about the joins between d