New problem with my Sony xperia t2 ultra dual

I have recently discovered this new problem with my Sony xperia t2 ultra dual.it displays" sorry but xperia home is not wotking". And if iclick on OK it displays the same message again.
Can anyone help me solve this problem?
Please reply quickly what to do?

 Repair the phone with PCC PC Companion (PCC)  Bridge (for Mac)   Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355 

Similar Messages

  • Problem with screen after Xperia Z repair.

    Hi friends,
    I have the following problem. I have Sony Xperia Z (c6603) which I purchase on 07.2013. Two months ago the phone broke in my pocket (Display, touch screen also the back panel - all gorila glass parts ). Because there is no official service in my town(Plovdiv, Bulgaria) I give the phone to some service here and they changed the broken parts. Now phone have some other problem: After few (2-3) hours work screen begin to flickr, letters look like they are swimming in water and later part of display turn to black. I am big fan of Sony and have lot of their products (Phones, TVs, Cameras) but I am really in love with this phone and I wonder is there some way to fix this problem or I will have to continue to use Mine Xperia X10. May be later in 2015 will change it with Xperia Z3 but now I dont have this opportunity. Here some images before the reapar:
    http://bgwebdesign.org/xperia/1.JPG
    http://bgwebdesign.org/xperia/2.JPG
    And some images of the new problem:
    http://bgwebdesign.org/xperia/3.JPG  - "swimming" letters
    http://bgwebdesign.org/xperia/4.JPG  - flickering duplicating content on screen
    http://bgwebdesign.org/xperia/5.JPG 
    http://bgwebdesign.org/xperia/6.JPG  - problem on edges with white screens
    http://bgwebdesign.org/xperia/7.JPG
    http://bgwebdesign.org/xperia/8.JPG  - black screen after 3 hours work

    Deratizer wrote:
    Hi guys, Well your problem lies in not reusing all the foils and flex covers from the original display, flex cables are close together and are creating an interference. When changing display make sure you do the following: 1. Turn off the phone. VERY IMPORTANT, you can damage the battery by just unplugging it while phone turned on (also LCD). (Hard turn off is with power button + volume up.2. When disassembling make sure to remember where all the covering foils from flex cables go, do not bend flex cable too much, use common sense and light touch.3. Do not start the phone before you have all the screws in and DO NOT TIGHTEN TOO MUCH, also back cover should be in place, notice two golden dots on the back plate especially on Sony Xperia series4. When backlight flickering (strobe like effect) on sides occur even after following steps above, DO NOT PANIC!, turn on a game or any application that won't turn off the display for a few hours, plug the charger in and burn the LEDs on the backlight, as time passes you will see the flickering disappearing slowly, mine was about 2-3 hours5. Turn off the phone to cool down.6. Voila  Mine worked this way and just because I panicked I torn away the mic flex and all that was needed was a little bit of patience. Hope this helps someone.  btw, the pictures above, that is either interference or damaged flex cable, but I believe you just need to put the foils between the flex cables.Hi I will like to try out what you are saying but would be better if you uploaded a photo or youtube video link or explain better what you mean by the foils. I ordered my xz 6603 from singapore and 3 weeks later after I did and OTA  I had similar problem, I called the supplyer and sent it back for repair I was told it wasnt a hardware problem but that I had installed an incompartible OS version (weird since I did an OTA) but it took 6 months to get my device back, I got it back in Feburary and now thesame problem has occured as i have upgraded to lollipop. I cant wait another 6 months to get the device back again 

  • Double tap to wake up screen function for Sony Xperia Z Ultra

    Hi all, i have a question, how to configure "double tap to wake up screen" on sony xperia z ultra.. thank you so much.. Reo

    It's not supported http://talk.sonymobile.com/t5/Xperia-Z-Ultra/Z-Ultra-4-4-2-14-3-A-0-681-firmware-KitKat-Rolling/m-p/603317/highlight/true#M3921 Xperia Z Ultra KitKat changelog as per users New Homescreen and locksreen wallpapers.Transparent navigation bar and status bar.New Battery icon.No touch to wake up feature.New start up screen.New KitKat Boot animation.Screenshot option in Power menu.Calendar app updated.Answering machine option in call app.Manage notification settings for particular app.Default SMS app settings.Background Defocus app added in camera.

  • Extreme hang problem in Xperia T2 Ultra Dual after Lollipop Update.

    Extreme hang problem in Xperia T2 Ultra Dual after Lollipop Update.Extreme and Irritating hang problem occurs after I have updated T2 Ultra Dual Phone with Lollipop Version.Kindly assist and also if Boot the device will it be solved via flashboot and unlock the bootloader?? Waiting for revert.Kindly revert.

    Flashmode or Fastboot mode is only for those that wish to root and install a custom Rom or firmware, if that's what you want to do then head over to XDA - Howwever have you tried a system repair as this usualy fixes issues after an upgrade.
    Performing a system repair using PC Companion will often fix issues - This will factory reset your phone and erase all data so best to backup before you begin
    Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
    Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
    If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP

  • Two new problems with the Quicktime Plug-in

    I recently discovered two new problems with the current Quicktime Plug-in for Mac OS X.
    First, the Quicktime Plug-in is unable to stream Quicktime media in any internet browsers other than Safari.
    There is just nothing on the spot where the embedded Quicktime player should be.
    Second, the Quicktime Plug-in only shows the message "The operation couldn't be completed. This file is not a movie file (-2048)"
    everytime it should work together with the Flip4Mac Plug-in. The thing is, when facing a webpage where a wmv or wma file is
    embedded, there only shows that error message on the spot where the player should exist. I first thought that it would be a
    problem with Flip4Mac. So I uploaded about this problem on telestream.net, only to hear that the error message above belongs
    to the Quicktime Plug-in.
    Both of these problems did not happen at all only three weeks ago. The embedded Quicktime player showed up without any problem
    in my Firefox and Opera, and wmv or wma files were streamed successfully through the Flip4Mac and Quicktime Plug-ins.
    Then, suddenly, after some point, these two problems began to occur, and there is no information on how to solve them on the web.
    I obviously tried uninstalling and reinstalling Quicktime. I even completely erased the hard disk of my Macbook, and reinstalled the
    whole Mac OS X. But the problems still remained. I borrowed another Macbook from my friend to check whether these problems
    occur in other computers, and they did occur in my friend's Macbook as well. So they are definitely not the matter of my own Macbook only.
    I think these might be the problems with the new Quicktime Plug-in 7.7.1.
    Please check about these problems and solve them on the next version of the Quicktime Plug-in.
    I will give you a couple of hyperlinks so that you can check about the problems directly.
    http://blog.naver.com/dbswhddlf1?Redirect=Log&logNo=130025903581
    ↑ This link is for the first problem (the embedded Quicktime player not showing up in any browsers other than Safari)
    http://blog.daum.net/wellabc/15434322
    ↑ This link is for the second problem (the error message showing up on the spot where a wmv or wma file should be streamed)
    p.s: I am sorry that I am Korean.

    I recommend that you repeat all this via
    http://www.apple.com/feedback/quicktime.html
    to make sure that Apple will see it.

  • New problems with Acrobat 11.03 for Mac

    I'm having new problems with my Adobe Acrobat 11.03 for Mac.  These issues are relatively new and did not occur when I first bought the product about 9 months ago.
    1) When scanning documents from an HP scanner into Adobe on my Mac, the scanning works fine, but a multi-page document (scanned as one) is saved as a separate PDF for each page.  Bothersome to then have to combine all those separate files into one doc.  I can do it, just don't think I should have to take the time.
    2) Occasionally, when working in Adobe, the menu bar at the top will disappear when I click on the Adobe icon or a previously saved PDF.  Very frustrating.  Can't make a note or save the document without knowing the shortcuts, as the menu has disappeared.  Once I click somewhere outside Adobe, the menu bar reappears for the other programs.  This happens over and over. 
    Any ideas?
    Thanks.

    Hey JeffSPHR,
    Please refer this KB doc link mentioned below and try troubleshooting scanner issues:
    Troubleshoot scanning problems | Mac OS
    Let me know if this helps.
    Regards,
    Anubha

  • Problem with:  select 'c' as X from dual

    Problem with 'select 'c' as X from dual'
    I get 2 different results when I execute the above with SQLPlus (or java) depending on the instance I am connected to. For one instance the result is a single character and for the other the character is padded with blanks to 32 chars in the SQLPlus window (and java). Does anyone know what database setting causes this to happen? Is it a version issue ?
    Test #1: Oracle 9.2.0.6 - SQLPlus result is padded with blanks
    SQL*Plus: Release 9.2.0.1.0 - Production on Mon Dec 10 09:27:58 2007
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    Connected to:
    Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
    With the Partitioning option
    JServer Release 9.2.0.6.0 - Production
    SQL> select 'c' as X from dual;
    X
    c
    SQL>
    Test #2 Oracle 9.2.0.1 SQLPlus result is a single character.
    SQL*Plus: Release 9.2.0.1.0 - Production on Mon Dec 10 09:29:27 2007
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    Connected to:
    Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.1.0 - Production
    SQL> select 'c' as X from dual;
    X
    c
    SQL>

    Using 9.2.0.6 On AIX 5.2 I get the single byte result:
    UT1 > select 'c' as X from dual;
    X
    c
    If the databases are on different Oracle Homes you may want to check the sqlplus global logon files for any set commands.
    If you executed the two sql statements from different OS directories you may also want to check your sqlpath for sqlplus .logon files.
    Try issueing clear columns and repeating the statement. Are the results the same?
    HTH -- Mark D Powell --

  • How to turn off Safe Mode in My Xperia T2 Ultra Dual

    i cant disable the safe mode in my xperia T2 ultra dual, please help

    Or simply try this button:
    http://userguide.sonymobile.com/referrer.php?region=global-en&product=xperia-t2-ultra#!Resetting-your-device.html

  • New problem with camera and imovie 08

    i have two questions already posted about my camera not being found by imovie 08 except that it did it the first time and wouldn't any time after that.
    well here's the new problem. as i'm sitting here trying to find some other post that could help me with my dilemna imovie opens and shows my impost screen but says "communication error". with my first joy and imovie working again came confusion about this error. the error makes it so i cannot import video because the next "error" that comes up says my camera is disconnected or off but even this is farther than i've gotten in weeks. i don't know what this error means and i still can't import video. anyone have any suggestions as to how to fix this?

    Hi
    Test another FW-Cable.
    Test Your Camera on another Mac so that DV-in still works OK
    Toogle in iMovie pref: Play-back via Camera (on<->off some times)
    Other ways to import Your miniDV tape:
    Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE Mac OS Exchange formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    What Camcorder ?
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
    Using WHAT ? :
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie 8 (7.1.?) ?
    • iMovie HD 6 (6.0.4/3) ?
    Free space on internal (start-up) hard disk ? (Others don't count)
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK eg recording and playback to TV)
    Delete iMovie pref file may help sometimes. I rather start a new account, log into
    this and have a re-try.
    from LKN 1935:
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten:
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check:
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About../More..
    under Firewire.. what do you read..?
    Yours Bengt W

  • Sony Bridge for Mac doesn't work with my Sony Xperia J

    I have installed Sony Bridge for Mac version 3.7.1, but it won't connect to my Sony Xperia J which I have only had for 3 months.
    I get the error "Could not connect to your Xperia device. Please disconnect and reconnect it again. Restart the device if the problem persists". All the time.
    I have tried all of the suggestions in the error message. I have also tried reinstalling Sony Bridge for Mac, to no avail.
    I am running Mac OS X 10.9.2 on an iMac. I am also using the correct USB lead - the one supplied with the phone.
    The Mac system log shows this error:
    Apr  3 20:42:35 robins-imac.default Sony Ericsson Bridge for Mac[973]: BUG in libdispatch client: kevent[EVFILT_WRITE] delete: "No such file or directory" - 0x2
    I suspect that whoever wrote Sony Bridge for Mac did not try it on OS X 10.9.2.
    I am seriously thinking of getting rid of this phone and getting one that works properly with the Mac - ie, not a Sony phone. Sony always seem to have problems with supporting Macs, for some bizarre reason.

    Hi Yorkshirecomposer,
    I will ask the development crew about the system log error. Additionally, could you provide me with error logs to send them as well?
    Here’s how to get error logs from Sony Bridge for Mac: 
    1. In BfM, hold the "alt" key down while selecting the "Phone" menu. Select "Clear logs" to remove all old logs and get a clean start
    2. Reproduce the problem you're having, whether it's connecting the phone, importing photos, doing backup...
    3. In BfM, hold the "alt" key down while selecting the ”Xperia” menu. Select "Export logs"
    4. On the computers desktop there should now be a file named "SonyBridgeForMacLogs_[date].zip
    5. PM that file to me or post the contents here
    Best Regards,
    David

  • Problems with FuzzyLogic 4 and KT4 Ultra

    I am having problems with the overclocking using the FuzzyLogic 4 and my KT4 Ultra board. It is a new board with a new Athlon 2200 XP processor and 1GB crucial memory. If I use FL4 to overclock using the auto session, it puts the turbo to 1.93GHz after the reboot. After about an hour the system will lock up completely. If used the manual settings of FL4 to lower the increments by 2 all the way back down to the original speed. None of the overclock settings will work for more that a couple of hours! I mean I can't even get this 1.8GHz cpu to overclock to 1.833GHz for more than a couple of hours without crashing. Should I be overclocking in the bios instead of using this program? The memory is 266 DDR.

    Hi, i have a kt4-ultra sr and i have same problems to overclocking stable cpu xp 1800+ (1533 mhz)------to (1566 mhz), i try overcloking again on 1566 mhz- 1600 mhz my system freeze with run games.lamentably kt4 was not what I hoped. :O.
     i buy it model (with a ventilator in chipset )for not to have problems of overclocking, but  paid  expensive and in fact not works of correct way  for anything .I am unconformed with kt4 .I see that you have same problems.
    greetings  

  • New problem with display on Macbook Pro retina (Samsung panel)

    Hello All,
    I am a very new people on your forum but a few weeks ago i bought a new macbook pro retina with samsung panel.
    I haven't ghosting effect on my macbook but i have a new and really bad problem.
    I try to found a some information on Russians forums but nobody can help me with it.
    I can see an artifacts in the form of flashing pixels on all display.
    It occurs in 20-30 minutes after the start of work.
    Today i try to test it on game Dirt 2 and i can see defects after 2 minutes after start. So i think it can be reason with Geforce 650 but when i back to desktop and use HD 4000 i still see a problem.
    This is best seen on a black screen with high backlight.
    When i try to connect TV via HDMI i can't see any problem in my TV.
    So i really don't know what could be the reason.
    I attached the video with issue to video hosting
    http://vimple.ru/579f880e8b7045e09f8fc5bc097c5e2b
    Also i have a many software problem like Crashing safari and iTunes. It can be a few times per day.
    I really disappointed with my new Macbook.
    I haven't any problem with old 2009 Macbook pro with Snow Leopard but Mountain Lion is not working well.

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • New Problems with IPod nano - crackle and clicking

    Hi,
    I got the IPod nano (2GB) a view weeks ago. I haven't changed anything - only copied mp3 songs and photos on it.
    Today suddenly during jogging the nano starts to crackle and click - like an old analog tape. This didn't stop any more even after a lot of resets. I have connected my IPod with USB-2 onto my computer and recharged the accu completely. After disconnecting properly the problem is still the same. Also the buttons and the wheel don't work correctly anymore. Has anybody similar experiences? It seems apple has big trouble and problems with this new product. Maybe the IPod nano isn't fully well-engineered jet.
    I am looking forward for your help and suggestions.
    Thanks in advance!
    Your Stephan

    Hi Mike,
    and what did you do finally?
    Did you bring the Ipod back to
    your dealer for an exchange?
    My IPod didn't get wet during
    jogging I have carefully kept an
    eye on it.
    Is this a general problem with the IPod
    or only with some units?
    Thanks
    Stephan

  • I am facing a new problem with xml schema, plz help me

    Hi @,
    I am facing a problem with xml schema validation. Below is my code.
    public void initialize(String cfgFileName) {
    try {
    try {
    DOMParserWrapper parser = (DOMParserWrapper)Class.forName("dom.wrappers.DOMParser").newInstance();
    parser.setFeature( "http://apache.org/xml/features/dom/defer-node-expansion",true );
    parser.setFeature( "http://xml.org/sax/features/validation",true);
    parser.setFeature( "http://xml.org/sax/features/namespaces",true );
    parser.setFeature( "http://apache.org/xml/features/validation/schema",true );
    parser.setFeature( "http://apache.org/xml/features/validation/schema-full-checking",true );
    Document document = parser.parse(cfgFileName);
    System.out.println("Vijay .. code .. damar\n");
    }catch (org.xml.sax.SAXParseException spe) {
    } catch (org.xml.sax.SAXNotRecognizedException ex ){
    } catch (org.xml.sax.SAXNotSupportedException ex ){
    } catch (org.xml.sax.SAXException se) {
    if (se.getException() != null)
    se.getException().printStackTrace(System.err);
    else
    se.printStackTrace(System.err);
    }catch (Exception e) {
    System.out.println("Caught unknown exception : \n");
    e.printStackTrace(System.err);
    System.out.println("Vijay .. code .. success\n");
    DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
    DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
    //docBuilder.setErrorHandler(myErrorHandler);
    cfg = docBuilder.parse(new File(cfgFileName));
    cfg .getDocumentElement ().normalize ();
    } catch (Exception e) {
    e.printStackTrace();
    In the above code I am parsing the xml file and i am doing schema validation. Schema validation is proper and it is validating correctly. Only problem is that, It is validating and showing error correctly correctly but it is not catching that error.
    For clear understanding I am printing one statement before parsing and after parsing.
    SYSTEM.OUT.PRINTLN("Vijay .. code .. damar\n") this is before parsing
    SYSTEM.OUT.PRINTLN("Vijay .. code .. success\n") this is after parsing
    Here what is happening means, It is validating correctly and showing error :
    [Error] nw_layout-new.xml:800:97: Datatype error: Value 'y' does not match regular expression facet 'yes|no'..
    Vijay .. code .. damar
    Vijay .. code .. success
    Here it is showing error and still continueing not catching.
    Plz give solution for this.
    Thanks
    vijay K

    Hello dipthebe,
    Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Regards,
    -Norm G.

  • New Problem with Premiere Elements 8-Blue overlay over video

    I'm still trying to begin using the trial version of Premiere Elements and have a new problem.  When I add video files to the project, they are displayed with a blue coating over the whole video when it is played, or in many cases it is just black with no video.  If I click in the screen, I see
    the stopped video as it shoiuld be (clear), but as soon as I start playing the video, then nothing works. I hear the audio but the video is either black or has a blue overlay making it difficult  to even see what is on the screen.  I've tried changing to software rendering during playback with no help.  The program is unusable as it is.  I also have problems adding files to the project when I try to add from files and folders.  I can't select multiple files and when I try to add one at a time, the 2nd file replaces the first instead of being added.  I installed using the compatibility options in Win 7 because the application is listed as being incomaptible (even though Adobe claims it is Win 7 compatible.)  I would really love to have this program work.  Any suggestions.  I  have a fairly powerful computer except for the graphics being Intel integrated rather than a separate card.

    To answer my own question, disabling "Enable GPU" seems to eliminate the blue overlay.  I found a reference to it on a page that previously was not available.

Maybe you are looking for