New problems with simpledateformat

sorry guys to my previous post i had solved the issue of formatting my date format..
but i have a new problem now is that when i enter the 13 mnth 2006 simpledateformat auto helped me rectify to jan of 2007.. and i look through the simpledateformat class it does not have any methods to help me check the validity of the date i am inputting.. is there any other class i have to use to check the validity??

hmm SimpleDateFormat doesn't have a set lenient
method only calendar has that...Scroll down some more.

Similar Messages

  • Two new problems with the Quicktime Plug-in

    I recently discovered two new problems with the current Quicktime Plug-in for Mac OS X.
    First, the Quicktime Plug-in is unable to stream Quicktime media in any internet browsers other than Safari.
    There is just nothing on the spot where the embedded Quicktime player should be.
    Second, the Quicktime Plug-in only shows the message "The operation couldn't be completed. This file is not a movie file (-2048)"
    everytime it should work together with the Flip4Mac Plug-in. The thing is, when facing a webpage where a wmv or wma file is
    embedded, there only shows that error message on the spot where the player should exist. I first thought that it would be a
    problem with Flip4Mac. So I uploaded about this problem on telestream.net, only to hear that the error message above belongs
    to the Quicktime Plug-in.
    Both of these problems did not happen at all only three weeks ago. The embedded Quicktime player showed up without any problem
    in my Firefox and Opera, and wmv or wma files were streamed successfully through the Flip4Mac and Quicktime Plug-ins.
    Then, suddenly, after some point, these two problems began to occur, and there is no information on how to solve them on the web.
    I obviously tried uninstalling and reinstalling Quicktime. I even completely erased the hard disk of my Macbook, and reinstalled the
    whole Mac OS X. But the problems still remained. I borrowed another Macbook from my friend to check whether these problems
    occur in other computers, and they did occur in my friend's Macbook as well. So they are definitely not the matter of my own Macbook only.
    I think these might be the problems with the new Quicktime Plug-in 7.7.1.
    Please check about these problems and solve them on the next version of the Quicktime Plug-in.
    I will give you a couple of hyperlinks so that you can check about the problems directly.
    http://blog.naver.com/dbswhddlf1?Redirect=Log&logNo=130025903581
    ↑ This link is for the first problem (the embedded Quicktime player not showing up in any browsers other than Safari)
    http://blog.daum.net/wellabc/15434322
    ↑ This link is for the second problem (the error message showing up on the spot where a wmv or wma file should be streamed)
    p.s: I am sorry that I am Korean.

    I recommend that you repeat all this via
    http://www.apple.com/feedback/quicktime.html
    to make sure that Apple will see it.

  • New problem with my Sony xperia t2 ultra dual

    I have recently discovered this new problem with my Sony xperia t2 ultra dual.it displays" sorry but xperia home is not wotking". And if iclick on OK it displays the same message again.
    Can anyone help me solve this problem?
    Please reply quickly what to do?

     Repair the phone with PCC PC Companion (PCC)  Bridge (for Mac)   Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355 

  • New problems with Acrobat 11.03 for Mac

    I'm having new problems with my Adobe Acrobat 11.03 for Mac.  These issues are relatively new and did not occur when I first bought the product about 9 months ago.
    1) When scanning documents from an HP scanner into Adobe on my Mac, the scanning works fine, but a multi-page document (scanned as one) is saved as a separate PDF for each page.  Bothersome to then have to combine all those separate files into one doc.  I can do it, just don't think I should have to take the time.
    2) Occasionally, when working in Adobe, the menu bar at the top will disappear when I click on the Adobe icon or a previously saved PDF.  Very frustrating.  Can't make a note or save the document without knowing the shortcuts, as the menu has disappeared.  Once I click somewhere outside Adobe, the menu bar reappears for the other programs.  This happens over and over. 
    Any ideas?
    Thanks.

    Hey JeffSPHR,
    Please refer this KB doc link mentioned below and try troubleshooting scanner issues:
    Troubleshoot scanning problems | Mac OS
    Let me know if this helps.
    Regards,
    Anubha

  • Problem with SimpleDateFormat.parse()

    Hello
    I have a problem with the parse-function in SimpleDateFormat.
    When i try to parse the date Fri Jul 15 17:23:41 2005 with this pattern EEE MMM d HH:mm:ss yyyy i get the exception java.text.ParseException: Unparseable date: "Fri Jul 15 17:23:41 2005".
    This is my code:
    SimpleDateFormat df=new SimpleDateFormat("EEE MMM d HH:mm:ss yyyy");
    try {
      df.parse(strDate);
    } catch (ParseException e) {
      e.printStackTrace();
    }Can someone explain me what i did wrong?
    Thanks
    Matthias

    Since your name is "Matthias" it is possible that your locale is one that does not use the English language. If that is the case then your problem is that "Fri" or "Jul" are not correct abbreviations in your language.
    Easiest way to test this idea is to format a date (such as now) using that SimpleDateFormat object and see what the output looks like.

  • New problem with display on Macbook Pro retina (Samsung panel)

    Hello All,
    I am a very new people on your forum but a few weeks ago i bought a new macbook pro retina with samsung panel.
    I haven't ghosting effect on my macbook but i have a new and really bad problem.
    I try to found a some information on Russians forums but nobody can help me with it.
    I can see an artifacts in the form of flashing pixels on all display.
    It occurs in 20-30 minutes after the start of work.
    Today i try to test it on game Dirt 2 and i can see defects after 2 minutes after start. So i think it can be reason with Geforce 650 but when i back to desktop and use HD 4000 i still see a problem.
    This is best seen on a black screen with high backlight.
    When i try to connect TV via HDMI i can't see any problem in my TV.
    So i really don't know what could be the reason.
    I attached the video with issue to video hosting
    http://vimple.ru/579f880e8b7045e09f8fc5bc097c5e2b
    Also i have a many software problem like Crashing safari and iTunes. It can be a few times per day.
    I really disappointed with my new Macbook.
    I haven't any problem with old 2009 Macbook pro with Snow Leopard but Mountain Lion is not working well.

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • New problem with camera and imovie 08

    i have two questions already posted about my camera not being found by imovie 08 except that it did it the first time and wouldn't any time after that.
    well here's the new problem. as i'm sitting here trying to find some other post that could help me with my dilemna imovie opens and shows my impost screen but says "communication error". with my first joy and imovie working again came confusion about this error. the error makes it so i cannot import video because the next "error" that comes up says my camera is disconnected or off but even this is farther than i've gotten in weeks. i don't know what this error means and i still can't import video. anyone have any suggestions as to how to fix this?

    Hi
    Test another FW-Cable.
    Test Your Camera on another Mac so that DV-in still works OK
    Toogle in iMovie pref: Play-back via Camera (on<->off some times)
    Other ways to import Your miniDV tape:
    Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE Mac OS Exchange formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    What Camcorder ?
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
    Using WHAT ? :
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie 8 (7.1.?) ?
    • iMovie HD 6 (6.0.4/3) ?
    Free space on internal (start-up) hard disk ? (Others don't count)
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK eg recording and playback to TV)
    Delete iMovie pref file may help sometimes. I rather start a new account, log into
    this and have a re-try.
    from LKN 1935:
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten:
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check:
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About../More..
    under Firewire.. what do you read..?
    Yours Bengt W

  • New Problems with IPod nano - crackle and clicking

    Hi,
    I got the IPod nano (2GB) a view weeks ago. I haven't changed anything - only copied mp3 songs and photos on it.
    Today suddenly during jogging the nano starts to crackle and click - like an old analog tape. This didn't stop any more even after a lot of resets. I have connected my IPod with USB-2 onto my computer and recharged the accu completely. After disconnecting properly the problem is still the same. Also the buttons and the wheel don't work correctly anymore. Has anybody similar experiences? It seems apple has big trouble and problems with this new product. Maybe the IPod nano isn't fully well-engineered jet.
    I am looking forward for your help and suggestions.
    Thanks in advance!
    Your Stephan

    Hi Mike,
    and what did you do finally?
    Did you bring the Ipod back to
    your dealer for an exchange?
    My IPod didn't get wet during
    jogging I have carefully kept an
    eye on it.
    Is this a general problem with the IPod
    or only with some units?
    Thanks
    Stephan

  • I am facing a new problem with xml schema, plz help me

    Hi @,
    I am facing a problem with xml schema validation. Below is my code.
    public void initialize(String cfgFileName) {
    try {
    try {
    DOMParserWrapper parser = (DOMParserWrapper)Class.forName("dom.wrappers.DOMParser").newInstance();
    parser.setFeature( "http://apache.org/xml/features/dom/defer-node-expansion",true );
    parser.setFeature( "http://xml.org/sax/features/validation",true);
    parser.setFeature( "http://xml.org/sax/features/namespaces",true );
    parser.setFeature( "http://apache.org/xml/features/validation/schema",true );
    parser.setFeature( "http://apache.org/xml/features/validation/schema-full-checking",true );
    Document document = parser.parse(cfgFileName);
    System.out.println("Vijay .. code .. damar\n");
    }catch (org.xml.sax.SAXParseException spe) {
    } catch (org.xml.sax.SAXNotRecognizedException ex ){
    } catch (org.xml.sax.SAXNotSupportedException ex ){
    } catch (org.xml.sax.SAXException se) {
    if (se.getException() != null)
    se.getException().printStackTrace(System.err);
    else
    se.printStackTrace(System.err);
    }catch (Exception e) {
    System.out.println("Caught unknown exception : \n");
    e.printStackTrace(System.err);
    System.out.println("Vijay .. code .. success\n");
    DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
    DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
    //docBuilder.setErrorHandler(myErrorHandler);
    cfg = docBuilder.parse(new File(cfgFileName));
    cfg .getDocumentElement ().normalize ();
    } catch (Exception e) {
    e.printStackTrace();
    In the above code I am parsing the xml file and i am doing schema validation. Schema validation is proper and it is validating correctly. Only problem is that, It is validating and showing error correctly correctly but it is not catching that error.
    For clear understanding I am printing one statement before parsing and after parsing.
    SYSTEM.OUT.PRINTLN("Vijay .. code .. damar\n") this is before parsing
    SYSTEM.OUT.PRINTLN("Vijay .. code .. success\n") this is after parsing
    Here what is happening means, It is validating correctly and showing error :
    [Error] nw_layout-new.xml:800:97: Datatype error: Value 'y' does not match regular expression facet 'yes|no'..
    Vijay .. code .. damar
    Vijay .. code .. success
    Here it is showing error and still continueing not catching.
    Plz give solution for this.
    Thanks
    vijay K

    Hello dipthebe,
    Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Regards,
    -Norm G.

  • New Problem with Premiere Elements 8-Blue overlay over video

    I'm still trying to begin using the trial version of Premiere Elements and have a new problem.  When I add video files to the project, they are displayed with a blue coating over the whole video when it is played, or in many cases it is just black with no video.  If I click in the screen, I see
    the stopped video as it shoiuld be (clear), but as soon as I start playing the video, then nothing works. I hear the audio but the video is either black or has a blue overlay making it difficult  to even see what is on the screen.  I've tried changing to software rendering during playback with no help.  The program is unusable as it is.  I also have problems adding files to the project when I try to add from files and folders.  I can't select multiple files and when I try to add one at a time, the 2nd file replaces the first instead of being added.  I installed using the compatibility options in Win 7 because the application is listed as being incomaptible (even though Adobe claims it is Win 7 compatible.)  I would really love to have this program work.  Any suggestions.  I  have a fairly powerful computer except for the graphics being Intel integrated rather than a separate card.

    To answer my own question, disabling "Enable GPU" seems to eliminate the blue overlay.  I found a reference to it on a page that previously was not available.

  • New problem with QT Pro, stopped recognizing .mpg sound files (Muxed)

    Have been playing .mpg & .mpeg files just fine with QT Pro. Today I can only get video, no sound output, and the video 'freeze frames' while the progress bar cursor continues to track. This is with ALL .mpg and .mpeg files. Sound is apparently there because the graphic sound visual is active. The freeze frame will start again by clicking the mouse button, or double strike of the spacebar (pause/unpause) but stops again later. All the files play normally in MPlayer. MOV files play fine for both sound and video with QT Pro. No improvement with re-installing QT Pro (new download). FirstAid - no problems. Currently running new version of Disk Warrior over entire disk but don't expect much improvement.

    That may be a problem with the timecode. Try to fix that with the timecode correction menu item. May not work but this is a freeware:Mpeg StreamClip

  • New Problem with 3.0

    Hello,
    After working with Apple tech "support" and going through several steps to fix all my problems with the new 3.0 "upgrade," I tried to use the Remote app again.
    Before the "upgrade," this app worked great.
    After installing the "upgrade," I had no access to my music library.
    Now, after the "support" call, when I try to access my library using Remote, I get an error in iTunes that says this:
    "An error occurred while connecting to the remote speaker... An unknown error occurred (-15000)."
    I restarted my computer, reset the iPod Touch, reset the network settings, followed every step the tech "support" gave me. The result: a new problem.

    Hello,
    After working with Apple tech "support" and going through several steps to fix all my problems with the new 3.0 "upgrade," I tried to use the Remote app again.
    Before the "upgrade," this app worked great.
    After installing the "upgrade," I had no access to my music library.
    Now, after the "support" call, when I try to access my library using Remote, I get an error in iTunes that says this:
    "An error occurred while connecting to the remote speaker... An unknown error occurred (-15000)."
    I restarted my computer, reset the iPod Touch, reset the network settings, followed every step the tech "support" gave me. The result: a new problem.

  • New problem with iChat

    Good morn
    I still haven resoved my previous post about connection problems with iChat, but hope to do that when I visit my dad next month. Thanks for all the advice anyway.
    A new problem has emerged, and seemed to coincide with the install of Tiger 10.3 last week. Now when I try to connect to various tests sites, I get an "insufficient bandwidth" error.
    Is this likely to be a problem with Tiger, as I have not changed my isp, settings or broadband type?
    Or could it just be the exess load on the system over the Christmas period with all those naughty teenage boys downloading **** and playing games during the school hols?
    Any suggestions and/or fixes greatfully accepted.
    Thanks
    Tim R

    Hi,
    Glad to hear you are up and running.
    New Discussions ReponsesThe new system for discussions asks that after you mark your question as Solved. You should take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
    Alternatively, you can change the status to Answered.
    If we use the forums properly they will work well...
    Ralph

  • New Problem with my mouse

    I use an eMac running Tiger. After upgrading to the newest version of Tiger, I have an intermittent problem with my mouse. It will suddenly only 'control (right) click'. This happens whether I use an apple single button mouse or a Logitech two button mouse. The only way to regain my 'left click' capability is to restart the computer.
    Is there a driver that I need to install with this new update? I've never had this problem before.
    Thanks!

    In other words:
    Since upgrading my G4 eMac to the latest iteration of Tigger, I have been having a problem with mice. Don't matter if it is the Apple one-button mouse or a Logitech two-button mouse.
    What happens is that I lose my 'left click' capability. That is to say, my mouse will only 'control click'. When having this intermittent problem, if I have the Logitech mouse installed, the left button acts as a 'right click' button. If I have the singlt-button mouse installed, it will only 'control (right) click'. Thus, it becomes hard to properly use the 'puter.
    I have to cuss a bit and then restart the 'puter for things to be temporarily put back on track. So far, nobody knows the answer to the problem. Any Mac geniuses out there?
    Thanks!

  • New problem with JSC1 Update 9

    I have just reinstalled JSC1 with update 9, I found a new problem:
    The datasources added to the server navigator does not exist if you exit the IDE and restart it !! (but the newly added server type does exists)
    Any help from anyone will be greatly appreciated.
    Thank you very much.

    Would you be able to retry this with a fresh userdir?
    On Windows, the userdir is at
    C:\Document and Settings\$Username\.Creator\1_0
    On Unices, it is at $UserHome/.Creator/1_0
    Suggest you, rename the userdir (after exiting IDE) to $something rather than deleting it .
    Thanks,
    Sakthi

Maybe you are looking for