New sales text ID in material master

Hi,
Before posting this query i have searched the forum but couldnt find any suitable answers for my query.
Our requirement is we need to have 3 new sales text ids created for material master with the language "EN".Per sap Standard we have a text id "0001" in material master which can be maintained once per language.Our requirement is to have multiple text ids with one language. Is this possible with standard sap configurations? where we can define a new Sales text id for material master.
Thanks & Regards,
Srini

Hi Srini
Since there is already one text type , so the best choice is to create another 2 text types with say 'ZA' and ZB
and use them.
Try coping the Langauge EN and create another 2 as per your requirement say  A and B. As of my knowledge you can have only one text per language , please check it once again at your end.
So you have to copy the EN and create another two.
Thanks
RB
Edited by: RBhardwaj on Mar 7, 2012 5:56 PM

Similar Messages

  • Adding a new long-text type to Material Master

    We need to add a long-text type to Material master, in addition to Basic, Inspection and Internal comment texts.
    What would be the best way to do this?
    Is there configuration that will allow the generation of a new tab in MM01 - Additional data screen, along with Basic, Inspection etc or should we create a new Screen exit for the new Text type to be edited?
    If a screen Exit is available could you please name it?
    Thanks a lot for the help - in Advance.

    Hi,
    You can add your own tabstrip in material master and put your long texts on it.
    Please have a look at transactions OMT3C, OMT3B, OMT3E.
    All customizing for material master extention can be found in SPRO -> Logistics - General -> Material Master -> Configuring the Material Master.
    Krzys

  • Dump:Sales Text View in Material master for FERT items

    Dear Gurus,
    I am Creating Material MAster record for Fert Item,
    I am trying to maintain the Sales View of it but system is
    giving me dump ,
    I  am getting the following message
    "No text maintained; a blank text has been created in English
    automatically
    Message no. MM630
    Diagnosis
    For your convenience, a blank text has been created in the
    language English automatically.
    Procedure
    You can maintain this text. If you exit text maintenance
    without maintaining it, it will be deleted automatically.
    Name of runtime error
    "LOAD_PROGRAM_NOT_FOUND"
    Error analysis
    On account of a branch in the program
    (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
    or a transaction call, another ABAP/4 program
    is to be loaded, namely " ".
    However, program " " does not exist in the library.
    Possible reasons:
    a) Wrong program name specified in an external PERFORM or
        SUBMIT or, when defining a new transaction, a new
        dialog module or a new function module.
    b) Transport error
    what can be the possible reason
    Please guide me in this context
    regards
    shailesh

    Dear Shailesh
    If this is the problem , then please go through the solution
                                                                                    No text maintained; a blank text has been created in English automatically                                                                               
    Message no. MM 630                                                                               
    Diagnosis                                                                               
    For your convenience, a blank text has been created in the language     
         English automatically.                                                                               
    Procedure                                                                               
    You can maintain this text. If you exit text maintenance without        
         maintaining it, it will be deleted automatically.                                                                               
    This is a standard behivour . No need to worry . it is not an error.It comes because you have to maintain something in sales text view if the sales view is maintained in OMS2 settings.And since it is a finished material then it will come.
    It dosent allow you to go to the next view when you press  enter .
    you have to go to the next view using Mouse .
    Just click on the next view you have to create it will allow.
    then fill all the views and just save the material you will be able to save
    Regards
    Rahul Singh
    Edited by: Rahul Singh on Nov 19, 2008 8:11 AM

  • How to Copy Sales Text Data from Customer Master to Sales Order.

    Hi SAP Guru's
    I have Completed Configuration for Central Text for Customer Master for two texts 1)Additional Attachments 2) Wooden Packing
    I got these two fields in Customer Master.
    I need these data to be copied from  Customer Master to sales order. But i am unable get these two in to sales order.
    Steps which  I have done for Text Determination.
    1) Text Id in for Text Object KNA1
    2)Placed Text Id  in Text Procedure  and assigned   this procedure to Customer Account Group.
    Could you please advice me
    Thanks in Advance.

    Text Control
    In this IMG activity, you define the rules for text determination. You must carry out the following steps:
    Select a text object and define the rules for text determination for this object. Text objects are, for example, the sales texts in the customer master record or the sales document header.
    Define the permitted text types for every text object. If the text types contained in the standard SAP R/3 System are not sufficient, create new ones.
    Define the access sequences. This way, you define how the SAP System should determine the texts for a text type.
    Group the text types together in text determination procedures. The SAP System then proposes the text types from the procedure when you maintain a customer master record or a sales & distribution document. The search for the respective text is carried out using the access sequence which you have stored for each text type in the procedure.
    Allocate the text determination procedures so that a procedure applies to the following criteria in each case:
    account group customer
    sales & distribution document type
    item category

  • Maintain Text Types in Material Master

    Hi,
    Is it possible to maintain different text types in the materials master "Sales text" tab just like we can maintain at the sales order header and item levels.
    In VOTXN there is no option for configuring text types for material master (text object MVKE) so I was wondering that if it is possible at all. Please let me know if you have any idea on the same.
    Regards
    Deepak

    Hi Deepak,
    In Material Master you can maintain the "Basic data text". It can be maintained in Basic data 1 view by selecting the Additional data. This text can also be fetched according to your requirement with the help of developer.
    Thanks,
    Sravan

  • Upload of purchase order text in the material master

    Now we have information of Purchase order text for all the material.
    Is it possible to upload the Purchase order text using LSMW.
    Some friends were telling that LSMW is not possible for Purchase Order text.
    Can anyone suggest how I can upload this purchase order text for all 1000
    material using LSMW program.
    /if not LSMW is there any other method to upload it
    thanks in advance
    deepak.s.goura

    Dear Deepak,
    there is standard direct upload i believe
    go to lsmw
    Execute 1st option
    then inLSMW:Object Attribute screen
    in standard batch/ direct input
    firsr radio button
    select object 005
    and method 003
    Program name RSTXLITF.
    Then go by normal process i.e source field , field mapping...
    In this way u can also upload Text in the Material master.
    Rewards if helpful
    Regards
    Sanjay L

  • Authorisation object for "PO text in the material master"

    Hi,
    My requirement is as below:
    "All users can see the Purchase Order Text as usual, but only a few users should be allowed to create / change the PO Long Text.
    For other users, the same should appear in display mode only (both in creation & in change mode, MM01 & MM02)."
    Please let me know, How to map this.
    As per my knowledge thsi is possible only thru authorisation. But I want to know what is the authorisation object for "PO text in the material master" (Pl note that only for PO text in the material master field). we want control on "PO text of material master"
    Regards.
    Chinna

    Hi,
    The authorisation object is "M_MATE_MAT", pl check
    Regards
    Merwyn

  • Howto create sales text based on material number in VA01any Exit or badi

    Hi All,
    I have to create sales text for each material number entered in sales order which using VA01 tcode .
    i know there is configuration settings in SPRO, but i want to do automatically while using VA01 tcode.
    i need right Exit or Badi for this as soon as i save the sale order.
    can i do this using Function Module CREATE_TEXT in that exit....any Suggestions.
    Regards,
    Sudhakar Reddy.A

    Hi..
    Please check the Availability in MV45AFZZ include of SAPMV45A program.
    If you are able to access the Corresponding table data ..you can set the Text directly at that place.

  • Need the TABLE where SALES TEXT of a material is stored

    I need the table where the sales text of a material is stored. This can be onbtained from MM03 --> SALES TEXT. Here we can pick it up from the language.I need the table where it is stored.

    Hi Gurpreet
    Please follow the below steps:
    1. Go to MM02.
    2. Select View: <b>Sales Text</b>
    3. When you are in the editor, use menupath: Goto->Header
    Here we can get the details of Text-ID, Text Name, Language, Text Object.
    Use these details for FM: READ_TEXT.
    We can retreive all text in the output of the FM.
    Hope this helps you.
    Kind Regards
    Eswar

  • Validation for PO text in the material master.

    Hi experts,
    I am trying to do a validation on the Purchase Order Text (long text) which must always be filled in Language EN and DE.
    Thus if a user tries to edit a material in MM02 or creates a new one in MM01 - this box of long text (PO text) must be filled, else it should throw an error.
    i created a BADI and inside that i am calling the FM read_text , but it check for only existing text already saved in the database.
    WHAT ABOUT THE RUN-TIME (ex  creating a material).
    or what if the user purposely deletes an existing PO long text and then tries to save it (database might already have a PO long text saved for that material).
    Kindly help me if there is any FM which can be called to check in the Runtime if the PO long text is filled or if we can do some customizing and make that PO long text Mandatory.
    Please not we need this field mandatory only for only 03 plants, that's where the problem is coming.
    Many Many thanks in advance.
    Rittik.

    Hi,
    You can maitain the PO text of material master record in english and german. To do this goto POtext view below languages maintained create icon will be there select that give the english language, enter the text in english and save. Again select german and enter the PO text.
    To get the PO text view mandatory , go to SPRO, logistic general, material master, fielld selection,define plant specific feild selection and plant specific screen selection. For 3 plants you can configure here.Hence the POtext view will be mandatory and gives error if not maintained. I hope this will resolve your issue. Thanking you.

  • Text field in material master

    Dear Expert
    How to take field name for Text in material master?
    Thanks for Advance

    Hi
    go to mm01, go to material text field, press f1 than go to technical information, or write that table name n go to se11 find the field name in that table

  • Text linkages from material master to purchase requisition

    I already set the text linkage between basic data text in material master with item text in PR. I left fix indicator blank since I want the text to be adopted automatically.
    I run MRP and create planned orders. Then I convert planned order to purchase requisition. Material master basic data text is not shown in purchase requisition. I tested using N and * and they both show. With N it shows (reading from material master) and I accnot modify it. With * it shows but I have to adopted to actually store the text as part of this document. With blank is not working. We want the text from material master to be automatically adopted in PR without manual intervention as with *.
    Thanks and regards, Jose Oyon.

    Hi
    If got ur query correctly : you want to make short text field in Preq as Display.
    If yes then go to Tcode OLME (or SPRO) -> Purchase requistion->Define Screen layout at doc level->select ME51N--->double click basic data, item and make short text filed as display.
    regards
    rahul.

  • Guideline for Using 40 Char in Short Text Field of Material Master

    Dear Experts & Forum Members,
    In MM01 while creating a Material Master record (spare part) we need to fill in Basic Data. It has a field known as "Short Text Field " This Field has limitation of 40 characters. This is the same field which has Searched associated with it. This description is what we see when we look for Stock Overview of Material in the Stores through MEMBER.
    To use this 40 characters efficiently people usually come up with a guideline so that maximum and meaningful information crucial information for identification of spare part/material is VIEWED when we see it.
    For example for an AC Motor the description may look like
    *MOTOR AC SQ 100KW 1500 RPM 8P CLA FRXYZ
    which describes AC Motor, Squirrel Cage Type, 100 KW, 1500 RPM, 8 Pole, Class A, Frame Size XYZ
    Request the forum members to provide / share any guideline they might have come up with to use these 40 characters to describe different spare parts.
    Thanks in advance for your help.
    Regards
    Vinay
    Edited by: VINAY MAITHANI on Jul 15, 2010 6:51 PM

    Hi Vinay,
    We are also doing the same activity and we are arranging the material description in a manner which is almost simlar to you.
    But, except one thing which is Classification. We have classification feature mapped with material master for the details of Dimension,Brand,Color and Orgin.
    For further commets, rever back.
    Regards,
    NAK
    Edited by: abdul kader on Jul 28, 2010 9:36 AM
    Edited by: abdul kader on Jul 28, 2010 9:38 AM

  • Validation for PO text in the material master :- BADI implementation

    Hi experts,
    I am trying to do a validation on the Purchase Order Text (long text) which must always be filled in Language EN and DE.
    Thus if a user tries to edit a material in MM02 or creates a new one in MM01 - this box of long text (PO text) must be filled, else it should throw an error.
    i created a BADI and inside that i am calling the FM read_text , but it check for only existing text already saved in the database.
    WHAT ABOUT THE RUN-TIME (ex creating a material).
    or what if the user purposely deletes an existing PO long text and then tries to save it (database might already have a PO long text saved for that material).
    Kindly help me if there is any FM which can be called to check in the Runtime if the PO long text is filled or if we can do some customizing and make that PO long text Mandatory.
    Please not we need this field mandatory only for only 03 plants, that's where the problem is coming.
    Many Many thanks in advance.
    Rittik.

    Hello Rittik,
    Please use Exit 'EXIT_SAPLMGMU_001' for your requirement. I checked and below code (READ_TEXT) picks latest text from the transaction in processing and hence can be used for raising any error. Let me know if you face any issues.
    if WMARC-WERKS = '...........' or '...'.
      lv_name = WMARA-matnr.
      CALL FUNCTION 'READ_TEXT'
        EXPORTING
    *   CLIENT                        = SY-MANDT
          id                            = 'BEST'
          language                      = 'E'
          name                          = lv_name
          object                        = 'MATERIAL'
    *   ARCHIVE_HANDLE                = 0
    *   LOCAL_CAT                     = ' '
    * IMPORTING
    *   HEADER                        =
        TABLES
          lines                         = lt_line
        EXCEPTIONS
          id                            = 1
          language                      = 2
          name                          = 3
          not_found                     = 4
          object                        = 5
          reference_check               = 6
          wrong_access_to_archive       = 7
          OTHERS                        = 8
      IF sy-subrc <> 0.
    *    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    *            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    endif.
    Regards,
    Diwakar

  • PO text using lsmw MATERIAL MASTER

    Hi , how to upload PO text trhough LSMW as its only loading 132 char, if i have 400 char how to load.
    there is a structure in lsmw BMMH7, but what to pass in tdformat and tdline and TDSPRASISO
    thanks

    Hi Heilman ,
    thanks for the reply, but is there any other way by which I can upload PO text as I have potext in one column and line. I am using LSMW , where it concatenates to 132 character, but i have to upload full say 400 char text.
    thanks
    bobby

Maybe you are looking for