New StartUp Issue

My new MacBook Pro 17" has been having startup issues recently. After I shut down, leave, and come back, the startup issue occurs.
After pressing the power button, fans will go on, proccessing noises occur, HOWEVER, it just boots to a white/grey screen W/OUT the apple logo or round loading bar. The keyboard does not initialize either.
The only thing that I have found to 'fix' it, is just to leave it powered off for an extended period of time. It will then boot up.
I have tried many non-software related 'cures', and my compuer is completely up to date on all OsX software.
Any ideas guys??

you can try to boot to safe mode ( restart holding Shift )
- you can attempt to boot to install disc and disk utility
- you can boot to AHT ( apple hardware test ) to see what component is failing ( insert disc, restart holding D )
- chances are, this is a hardware issue though. you will probably need repairs.

Similar Messages

Startup issue when having more than one database on machine

Startup issue when having more than one database on machine:
I’ve installed two databases.
When I shutdown one of the database and try to start it up using
Startup pfile=’…location..’;
I get ora-12514: TNS: listener does not currently know of service rquirest in connect descriptor
when I try it again after 3 seconds, I get a new error, ora-01041: internal error. Hostdef extension doesn’t exist
Shutdown and Startup gave no problems when I had one database. Why am I getting problems when I have two databases?
I’m using: show parameter pfile|spfile; to make sure I have the right parameter locations, so the error shouldn’t be from location.
I’ve never installed two databases on one machine, so maybe I’m making a first-timer’s error.
Anyone know how to get this working, i.e. starting and stopping DB without issues?
Using oracle 11gR2 on Windows 7 64bit, all is working normal.
Thanks,
Ayman
Edited by: aymanzone on Jun 15, 2011 9:27 AM

aymanzone wrote:
my oracle_sid is set to the name of one of my databases
echo %oracle_sid%
shows me the name of my first database.
Still not working though.
When I start the services of both databases using Services, I can connect and run queries from both of the database.
Edited by: aymanzone on Jun 15, 2011 11:47 AMFirstly ... the Oracle Service for the instance should be started for the DB you are trying to connect or start.
Next ... from the command prompt:
set oracle_sid=<Instance_Name>
sqlplus sys as sysdba
startup pfile='location of the respective db pfile'
Now, if you want to start or connect to another DB which is on the same server (again assuming the Service is STARTED) ...
From the same command prompt session or other ....
set oracle_sid=<Other_Instance_Name>
sqlplus sys as sysdba
startup pfile='location of the respective db pfile'
Edited by: Srikanth on Jun 16, 2011 12:27 AM

Another startup-issue

I have a problem with system startup. My MacBook is pretty much brand new and the system is not cluttered or anything. And still the startup-process freezes even before the apple logo appears, so I just get the grey screen and that's it. I have read about other startup issues, but in those cases the computer at least booted until the apple logo was shown, so my case is slightly different.
After unplugging my external USB hard drive startup works. It also works when I plug it into the other USB-slot. Other devices plugged into the problematic slot (keyboard, USB-stick) work and do not cause problems during startup.
Any experiences with this problem? Would you say the USB-slot is broken in any way? Is it something that can be fixed?
Ordinarily, I would just use the other slot and be done with it. Since the computer is brand new, however, I'd prefer to be on the safe side.
Thanks in advance,
Timo

Hi
+"Would you say the USB-slot is broken in any way?"+
Possibly? Running an Apple Hardware Test might say?
+"Is it something that can be fixed?"+
Yes. It should be covered under the standard 1 year warranty regardless. Provided the fault is not down to wilful or accidental damage it will be covered under the warranty.
You could connect the external USB hard drive in the affected slot an restart the mac in verbose mode (command+v) at restart. This should display error messages - if any - at the point where the start-up stalls. Possibly giving a clue as to what it's having a problem with? You may see an I/OKit error problem or something similar?
Tony

New iMac has never chimed at startup? Is this the new Startup?

New iMac has never chimed at startup? Is this the new Startup? Im curious becuase my machine runs perfectly, and I know Apple takes some pride in its StartUp Chime.

Not normal,
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.

Startup issue - Process 'Starting Framework'

Hi
I seem to have a startup issue with NM2004s. I get a Half Green/ Half Yellow icon in the MMC. The 01 instance is always yellow and never progresses onto green. I have a process status of 'starting framework'.
Anyone else had this issue?
Cheers
Ian

Hi Ian,
I just installed the J2E on a laptop that already has a NSP instance.I am facing the same issue on the J2E.Do you remember if you could resolve this and how?
Any hints would help.
Thank you

Yosemite 10.10.1 new startup window

i recently turned my mac on and it seems that it has a new startup screen. I'm not sure why this is happening. this just started to occur.

db.mcm14 wrote:
instead of the apple logo and the loading bar it starts up with the apple logo. then it requires my password then the bar appears and starts loading the system.

How to create a new startup-disc?

Hello folks!
I'm working with Leopard (10.5.2) and have a new GeForce 8800Gt installed. Because of this my Leopard-installation disk does not work any more. For the 8800GT one has to use 10.5.2 and on the installation-disk is only 10.5! Another reason is that there must be the graphics update installed. So now I can't use my disk repair software "from outside" also my DiskWarrior startup-CD does not work anymore - for the same reason.
Has anybody got an idea how I can create a new StartUp disk with Leopard 10.5.2 on it? So I could put my DiskWarrior on this CD and repair my start-volume, if necessary?! Any help is extremely welcome!
Jones

Making a bootable DVD or CD is not a trivial task. There was a utility for Panther (10.3) called BootCD that allowed one to easily do this, but it has never worked for any later OS X.
To do it for Leopard is going to need some pretty high-level programming skills. Im pretty sure it's beyond a simple "how-to" guide that one might expect to be able to find online.
Stick with the bootable external drive.

Managed server startup issue!!!

hi all,
i am facing managedserver startup issue
i am start the managed server it will up take the 6 min
how to reduce the time
1)i am trying differnt ways 1)threaddump 2)GCparamets
but no usee
can u see the log and give me suugestions
below log one perticuler area it will load the application 4 min
please see the time stamps 8:31:01 to 8:35:09
please give me suggistions!!
======================================
####<Apr 11, 2010 8:31:00 PM PDT> <Info> <Deployer> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043060997> <BEA-149059> <Module eci.jar of application Agile is transitioning from STATE_PREPARED to STATE_ADMIN on server agwlcrptrn1.>
####<Apr 11, 2010 8:31:01 PM PDT> <Info> <EJB> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-010009> <EJB Deployed EJB with JNDI name com.eigner.eci.EciSession.>
####<Apr 11, 2010 8:31:01 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-000000> <Listener: end ModuleCtx[appId=Agile, modId=eci.jar, type=ejb, Target=Cluster/AgileCluster] STATE_PREPARED>STATE_ADMIN>
####<Apr 11, 2010 8:31:01 PM PDT> <Info> <Deployer> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-149060> <Module eci.jar of application Agile successfully transitioned from STATE_PREPARED to STATE_ADMIN on server agwlcrptrn1.>
####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043309172> <BEA-000000> <Relaying updated state for app, Agile to STATE_ADMIN>
####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043309173> <BEA-000000> < +++ Returning app's state : STATE_ACTIVE>
####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <

hi sandeep,
i take the thread dump 10 times at the start the server can u look into this one...
===============================
CLASSPATH=/local/mnt/agile/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/local/mnt/agile/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/local/mnt/agile/bea/jrockit_160_05/lib/tools.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/weblogic_sp.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/weblogic.jar:/local/mnt/agile/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/webservices.jar:/local/mnt/agile/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/local/mnt/agile/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar::/local/mnt/agile/agile93/agileDomain/lib/jms.jar:/local/mnt/agile/agile93/agileDomain/lib/jndi.jar:/local/mnt/agile/agile93/agileDomain/lib/tibjms.jar
PATH=/local/mnt/agile/bea/wlserver_10.3/server/bin:/local/mnt/agile/bea/modules/org.apache.ant_1.6.5/bin:/local/mnt/agile/bea/jrockit_160_05/jre/bin:/local/mnt/agile/bea/jrockit_160_05/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin
Your environment has been set.
QCHTTPHeaderIdentityAsserter.initialize
AgileAuthenticationProviderImpl.initialize
2010-04-10 20:03:14
Full thread dump Java HotSpot(TM) Server VM (10.0-b19 mixed mode):
"Thread-13" daemon prio=10 tid=0x62a8a800 nid=0x1b6 waiting on condition [0x5f7b8000..0x5f7b9130]
java.lang.Thread.State: WAITING (parking)
 at sun.misc.Unsafe.park(Native Method)
 - parking to wait for <0xf2d78078> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
 at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
 at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
 at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
 at weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
 at weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
 at weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
 at weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
"LDAPCache-TTLTimer" daemon prio=10 tid=0x09277000 nid=0x1b5 in Object.wait() [0x5f90b000..0x5f90bfb0]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
 at java.lang.Object.wait(Native Method)
 - waiting on <0xf2d7c068> (a netscape.ldap.TTLTimer)
 at netscape.ldap.TTLTimer.run(LDAPCache.java:828)
 - locked <0xf2d7c068> (a netscape.ldap.TTLTimer)
 at java.lang.Thread.run(Thread.java:619)
"LDAPConnThread-1 ldaps://qpip.qualcomm.com:389" daemon prio=10 tid=0x5f6fc000 nid=0x1b4 runnable [0x5f95c000..0x5f95d030]
java.lang.Thread.State: RUNNABLE
 at java.net.SocketInputStream.socketRead0(Native Method)
 at java.net.SocketInputStream.read(SocketInputStream.java:129)
 at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
 at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
 - locked <0xf2d820a8> (a java.io.BufferedInputStream)
 at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
 at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:538)
 at java.lang.Thread.run(Thread.java:619)
"Thread-12" daemon prio=10 tid=0x61c2ac00 nid=0x1b3 waiting on condition [0x5f9ad000..0x5f9adeb0]
java.lang.Thread.State: TIMED_WAITING (sleeping)
 at java.lang.Thread.sleep(Native Method)
 at oracle.jdbc.pool.OracleConnectionCacheTimeOutThread.run(OracleConnectionCacheTimeOutThread.java:80)
"LDAPConnThread-0 ldap://10.47.24.141:9001" daemon prio=10 tid=0x61cb5400 nid=0x1b1 runnable [0x5fb55000..0x5fb55db0]
java.lang.Thread.State: RUNNABLE
 at java.net.SocketInputStream.socketRead0(Native Method)
 at java.net.SocketInputStream.read(SocketInputStream.java:129)
 at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
 at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
 - locked <0xf2d920a8> (a java.io.BufferedInputStream)
 at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
 at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:538)
 at java.lang.Thread.run(Thread.java:619)
"DoSManager" daemon prio=10 tid=0x0932a000 nid=0x1b0 waiting on condition [0x5f9fe000..0x5f9fee30]
java.lang.Thread.State: TIMED_WAITING (sleeping)
 at java.lang.Thread.sleep(Native Method)
 at com.octetstring.vde.DoSManager.run(DoSManager.java:433)
"VDE Transaction Processor Thread" daemon prio=10 tid=0x61c07000 nid=0x1ae in Object.wait() [0x5fba6000..0x5fba7130]
java.lang.Thread.State: WAITING (on object monitor)
 at java.lang.Object.wait(Native Method)
 - waiting on <0xf2d70090> (a com.octetstring.vde.backend.standard.TransactionProcessor)
 at java.lang.Object.wait(Object.java:485)
 at com.octetstring.vde.backend.standard.TransactionProcessor.waitChange(TransactionProcessor.java:367)
 - locked <0xf2d70090> (a com.octetstring.vde.backend.standard.TransactionProcessor)
 at com.octetstring.vde.backend.standard.TransactionProcessor.run(TransactionProcessor.java:212)
"ExecuteThread: '16' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a67400 nid=0x1ad waiting for monitor entry [0x5fbf7000..0x5fbf7fb0]
java.lang.Thread.State: BLOCKED (on object monitor)
 at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
 - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
 at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
 at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '15' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a66000 nid=0x1ac waiting for monitor entry [0x5fc48000..0x5fc49030]
java.lang.Thread.State: BLOCKED (on object monitor)
 at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
 - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
 at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
 at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '14' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a65000 nid=0x1ab waiting for monitor entry [0x5fc99000..0x5fc99eb0]
java.lang.Thread.State: BLOCKED (on object monitor)
 at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
 - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
 at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
 at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '13' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a63c00 nid=0x1aa waiting for monitor entry [0x5fcea000..0x5fceaf30]
java.lang.Thread.State: BLOCKED (on object monitor)
 at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
 - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
 at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
 at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '12' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a62c00 nid=0x1a9 runnable [0x5fd3b000..0x5fd3bdb0]
java.lang.Thread.State: RUNNABLE
 at weblogic.socket.PosixSocketMuxer.poll(Native Method)
 at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:102)
 - locked <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
 at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
 at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '11' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a61c00 nid=0x1a8 waiting for monitor entry [0x5fd8c000..0x5fd8ce30]
java.lang.Thread.State: BLOCKED (on object monitor)
 at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
 - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
 at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
 at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '10' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a60800 nid=0x1a7 waiting for monitor entry [0x5fddd000..0x5fdde0b0]
java.lang.Thread.State: BLOCKED (on object monitor)
 at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
 - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
 at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
 at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '9' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a6f400 nid=0x1a6 waiting for monitor entry [0x5fe2e000..0x5fe2f130]
java.lang.Thread.State: BLOCKED (on object monitor)
 at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
 - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
 at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
 at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '8' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928d400 nid=0x1a5 waiting for monitor entry [0x5fe7f000..0x5fe7ffb0]
java.lang.Thread.State: BLOCKED (on object monitor)
 at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
 - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
 at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
 at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '7' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928c000 nid=0x1a4 waiting for monitor entry [0x5fed0000..0x5fed1030]
java.lang.Thread.State: BLOCKED (on object monitor)
 at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
 - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
 at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
 at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '6' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928b000 nid=0x1a3 waiting for monitor entry [0x5ff21000..0x5ff21eb0]
java.lang.Thread.State: BLOCKED (on object monitor)
 at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
 - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
 at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
 at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '5' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0930c400 nid=0x1a2 waiting for monitor entry [0x5ff72000..0x5ff72f30]
java.lang.Thread.State: BLOCKED (on object monitor)
 at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
 - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
 at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
 at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '4' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928dc00 nid=0x1a1 waiting for monitor entry [0x5ffc3000..0x5ffc3db0]
java.lang.Thread.State: BLOCKED (on object monitor)
 at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
 - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
 at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
 at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '3' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x09288c00 nid=0x1a0 waiting for monitor entry [0x60014000..0x60014e30]
java.lang.Thread.State: BLOCKED (on object monitor)
 at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
 - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
 at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
 at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '2' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x092d4800 nid=0x19f waiting for monitor entry [0x60065000..0x600660b0]
java.lang.Thread.State: BLOCKED (on object monitor)
 at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
 - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
 at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
 at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x092d4400 nid=0x19e waiting for monitor entry [0x600b6000..0x600b7130]
java.lang.Thread.State: BLOCKED (on object monitor)
 at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
 - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
 at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
 at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0932d800 nid=0x19d waiting for monitor entry [0x60107000..0x60107fb0]
java.lang.Thread.State: BLOCKED (on object monitor)
 at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
 - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
 at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
 at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x0932c400 nid=0x19c in Object.wait() [0x60158000..0x60159030]
java.lang.Thread.State: WAITING (on object monitor)
 at java.lang.Object.wait(Native Method)
 - waiting on <0xf2daa030> (a weblogic.work.ExecuteThread)
 at java.lang.Object.wait(Object.java:485)
 at weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:157)
 - locked <0xf2daa030> (a weblogic.work.ExecuteThread)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
"Thread-7" daemon prio=10 tid=0x0932e400 nid=0x19b waiting on condition [0x601a9000..0x601a9eb0]
java.lang.Thread.State: WAITING (parking)
 at sun.misc.Unsafe.park(Native Method)
 - parking to wait for <0xf2daa150> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
 at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
 at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
 at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
 at weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
 at weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
 at weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
 at weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
"weblogic.timers.TimerThread" daemon prio=10 tid=0x60467800 nid=0x19a in Object.wait() [0x603fe000..0x603fef30]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
 at java.lang.Object.wait(Native Method)
 - waiting on <0xf2daa2c0> (a weblogic.timers.internal.TimerThread)
 at weblogic.timers.internal.TimerThread$Thread.run(TimerThread.java:267)
 - locked <0xf2daa2c0> (a weblogic.timers.internal.TimerThread)
"weblogic.time.TimeEventGenerator" daemon prio=10 tid=0x60431800 nid=0x199 in Object.wait() [0x60555000..0x60555db0]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
 at java.lang.Object.wait(Native Method)
 - waiting on <0xf2daa380> (a weblogic.time.common.internal.TimeTable)
 at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:286)
 - locked <0xf2daa380> (a weblogic.time.common.internal.TimeTable)
 at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:117)
 at java.lang.Thread.run(Thread.java:619)
"[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x6042e000 nid=0x198 runnable [0x605a5000..0x605a6e30]
java.lang.Thread.State: RUNNABLE
 at java.util.HashMap.<init>(HashMap.java:209)
 at java.util.jar.Manifest.<init>(Manifest.java:37)
 at java.util.jar.JarFile.getManifestFromReference(JarFile.java:160)
 at java.util.jar.JarFile.getManifest(JarFile.java:146)
 at weblogic.utils.classloaders.GenericClassLoader$JarSource.getManifest(GenericClassLoader.java:528)
 at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:310)
 at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:288)
 - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
 at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
 - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
 at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
 at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
 - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
 at java.lang.ClassLoader.defineClass1(Native Method)
 at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
 at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
 at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:335)
 at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:288)
 - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
 at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
 - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
 at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
 at weblogic.ejb.container.deployer.EJBModule.setupEJBToImplClassDependencies(EJBModule.java:1790)
 at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:397)
 at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
 at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
 at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
 at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
 at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
 at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
 at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
 at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
 at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16)
 at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155)
 at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
 at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
 at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
 at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
 at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
 at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
 at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
 at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
 at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
 at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
 at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
"Timer-1" daemon prio=10 tid=0x609e3800 nid=0x197 in Object.wait() [0x605f7000..0x605f80b0]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
 at java.lang.Object.wait(Native Method)
 - waiting on <0xf2d7a2c0> (a java.util.TaskQueue)
 at java.util.TimerThread.mainLoop(Timer.java:509)
 - locked <0xf2d7a2c0> (a java.util.TaskQueue)
 at java.util.TimerThread.run(Timer.java:462)
"Timer-0" daemon prio=10 tid=0x609e0000 nid=0x196 in Object.wait() [0x62350000..0x62351130]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
 at java.lang.Object.wait(Native Method)
 - waiting on <0xf2d7a3b0> (a java.util.TaskQueue)
 at java.util.TimerThread.mainLoop(Timer.java:509)
 - locked <0xf2d7a3b0> (a java.util.TaskQueue)
 at java.util.TimerThread.run(Timer.java:462)
"RMI TCP Accept-9896" daemon prio=10 tid=0x61ebf800 nid=0x194 runnable [0x623ba000..0x623bb030]
java.lang.Thread.State: RUNNABLE
 at java.net.PlainSocketImpl.socketAccept(Native Method)
 at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:384)
 - locked <0xf2d76210> (a java.net.SocksSocketImpl)
 at java.net.ServerSocket.implAccept(ServerSocket.java:453)
 at java.net.ServerSocket.accept(ServerSocket.java:421)
 at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
 at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
 at java.lang.Thread.run(Thread.java:619)
"RMI TCP Accept-0" daemon prio=10 tid=0x61eb6c00 nid=0x193 runnable [0x6240b000..0x6240beb0]
java.lang.Thread.State: RUNNABLE
 at java.net.PlainSocketImpl.socketAccept(Native Method)
 at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:384)
 - locked <0xf2da0170> (a java.net.SocksSocketImpl)
 at java.net.ServerSocket.implAccept(ServerSocket.java:453)
 at java.net.ServerSocket.accept(ServerSocket.java:421)
 at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
 at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
 at java.lang.Thread.run(Thread.java:619)
"Low Memory Detector" daemon prio=10 tid=0x63b01400 nid=0x192 runnable [0x00000000..0x00000000]
java.lang.Thread.State: RUNNABLE
"CompilerThread1" daemon prio=10 tid=0x63901c00 nid=0x191 runnable [0x00000000..0x634f3278]
java.lang.Thread.State: RUNNABLE
"CompilerThread0" daemon prio=10 tid=0x63900800 nid=0x190 runnable [0x00000000..0x635742f8]
java.lang.Thread.State: RUNNABLE
"Signal Dispatcher" daemon prio=10 tid=0x0919e000 nid=0x18f waiting on condition [0x00000000..0x00000000]
java.lang.Thread.State: RUNNABLE
"Finalizer" daemon prio=10 tid=0x09183000 nid=0x18e in Object.wait() [0x63aad000..0x63aae130]
java.lang.Thread.State: WAITING (on object monitor)
 at java.lang.Object.wait(Native Method)
 - waiting on <0xf2d8e2d0> (a java.lang.ref.ReferenceQueue$Lock)
 at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
 - locked <0xf2d8e2d0> (a java.lang.ref.ReferenceQueue$Lock)
 at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
 at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=10 tid=0x09181c00 nid=0x18d in Object.wait() [0x63afe000..0x63afefb0]
java.lang.Thread.State: WAITING (on object monitor)
 at java.lang.Object.wait(Native Method)
 - waiting on <0xf2daa4c8> (a java.lang.ref.Reference$Lock)
 at java.lang.Object.wait(Object.java:485)
 at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
 - locked <0xf2daa4c8> (a java.lang.ref.Reference$Lock)
"main" prio=10 tid=0x0900f000 nid=0x17b in Object.wait() [0xf7f1d000..0xf7f1e208]
java.lang.Thread.State: WAITING (on object monitor)
 at java.lang.Object.wait(Native Method)
 - waiting on <0xf2d723c8> (a weblogic.t3.srvr.SubsystemRequest)
 at weblogic.t3.srvr.SubsystemRequest.rendezvouz(SubsystemRequest.java:100)
 - locked <0xf2d723c8> (a weblogic.t3.srvr.SubsystemRequest)
 at weblogic.t3.srvr.SubsystemRequest.action(SubsystemRequest.java:81)
 at weblogic.t3.srvr.SubsystemRequest.start(SubsystemRequest.java:51)
 at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:457)
 at weblogic.t3.srvr.ServerServicesManager.startInAdminState(ServerServicesManager.java:237)
 - locked <0x6536b220> (a java.lang.Class for weblogic.t3.srvr.ServerServicesManager)
 at weblogic.t3.srvr.T3Srvr.initializeAdmin(T3Srvr.java:738)
 at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:499)
 at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:440)
 at weblogic.Server.main(Server.java:67)
"VM Thread" prio=10 tid=0x0917e800 nid=0x18c runnable
"GC task thread#0 (ParallelGC)" prio=10 tid=0x09015c00 nid=0x17c runnable
"GC task thread#1 (ParallelGC)" prio=10 tid=0x09016c00 nid=0x17d runnable
"GC task thread#2 (ParallelGC)" prio=10 tid=0x09018000 nid=0x17e runnable
"GC task thread#3 (ParallelGC)" prio=10 tid=0x09019000 nid=0x17f runnable
"GC task thread#4 (ParallelGC)" prio=10 tid=0x0901a000 nid=0x180 runnable
"GC task thread#5 (ParallelGC)" prio=10 tid=0x0901b000 nid=0x181 runnable
"GC task thread#6 (ParallelGC)" prio=10 tid=0x0901c400 nid=0x182 runnable
"GC task thread#7 (ParallelGC)" prio=10 tid=0x0901d400 nid=0x183 runnable
"GC task thread#8 (ParallelGC)" prio=10 tid=0x0901e400 nid=0x184 runnable
"GC task thread#9 (ParallelGC)" prio=10 tid=0x0901f400 nid=0x185 runnable
"GC task thread#10 (ParallelGC)" prio=10 tid=0x09020800 nid=0x186 runnable
"GC task thread#11 (ParallelGC)" prio=10 tid=0x09021800 nid=0x187 runnable
"GC task thread#12 (ParallelGC)" prio=10 tid=0x09022800 nid=0x188 runnable
"GC task thread#13 (ParallelGC)" prio=10 tid=0x09023800 nid=0x189 runnable
"GC task thread#14 (ParallelGC)" prio=10 tid=0x09024c00 nid=0x18a runnable
"GC task thread#15 (ParallelGC)" prio=10 tid=0x09025c00 nid=0x18b runnable
"VM Periodic Task Thread" prio=10 tid=0x61ec2000 nid=0x195 waiting on condition
JNI global references: 957
Heap
PSYoungGen total 229376K, used 39147K [0xe4d70000, 0xf4d70000, 0xf4d70000)
eden space 196608K, 8% used [0xe4d70000,0xe5cf3870,0xf0d70000)
from space 32768K, 70% used [0xf2d70000,0xf4427708,0xf4d70000)
to space 32768K, 0% used [0xf0d70000,0xf0d70000,0xf2d70000)
PSOldGen total 1835008K, used 0K [0x74d70000, 0xe4d70000, 0xe4d70000)
object space 1835008K, 0% used [0x74d70000,0x74d70000,0xe4d70000)
PSPermGen total 62208K, used 62093K [0x64d70000, 0x68a30000, 0x74d70000)
object space 62208K, 99% used [0x64d70000,0x68a134a8,0x68a30000)

Looking from the many users complaining, I am a bit scared whether should i proceed update to ios 8.0.2 to my ipad 2 or not? Does any one know news whether issues will be really fixed or should i stay on version 7 only?

looking from the many users complaining, I am a bit scared whether should i proceed update to ios 8.0.2 to my ipad 2 or not? Does any one know news whether issues will be really fixed or should i stay on version 7 only? Can appl,e has any plan to migrate their Ipad 2 customers to use or take new Ipad with some exchange offers ?
please I expect a quick responce to my queries. I am waiting eagerly what to do now?

Ipad Air dead after installing IOS 8.0.2
I have just downloaded and installed this version of IOS on my Ipad Air and it is DEAD.
It won't start up.
When I connect my Ipad to my MacbookPro, Itunes tells me the following:
"iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes."
What now? restore? try to remove 8.0.2?
what a misery!!

I need a new startup disk for my iBook G4, where can I get one?

I need a new startup disk for my iBook G4, where can I get one?

Hi, you might call Apple with it's serial# handy & see if they have original replacement discs, other than that...
http://www.ebay.com/sch/i.html?_kw=ibook+g4+software
iBook G4 OS X Tiger/ OS 9.2 Install...
Disk 1 2Z691-5532-A
DisK 2 2Z691-5533-A
(Mid 2005), (Late 2006) Model (A11133 Early 2006), Machine ID PowerBook6,7
Compatibility  A1133 (12.1 inch), A1134 (14.1 inch), M9846LL/A (12.1 inch), M9848LL/A (14.1 inch)
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
Apple may even have an International version...
https://discussions.apple.com/thread/5231053?tstart=0
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710

New ARB Issue: Button navigation and Declarative States

<[email protected]il.forums.adobe.com>
Message-ID: <C6277898.7F37%[email protected]>
Thread-Topic: New ARB Issue: Button navigation and Declarative States
Thread-Index: AcnOqlv/oTWkTNjMukqDP18VFO76uA==
Mime-version: 1.0
Content-type: multipart/alternative;
 boundary="B_3324475544_8859892"
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--B_3324475544_8859892
Content-type: text/plain;
 charset="US-ASCII"
Content-transfer-encoding: 7bit
A new ARB issue has been posted to the flex open source site:
http://opensource.adobe.com/wiki/display/flexsdk/buttonnavigationand+decla
rative+states
This issue concerns the new state syntax and what it means to leave a value
of a property implicit in one or more states.
Comments, suggestions, and feedback are welcome.
--B_3324475544_8859892
Content-type: text/html;
 charset="US-ASCII"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>New ARB Issue: Button navigation and Declarative States</TITLE=
>
</HEAD>
<BODY>
 
 
 
A new ARB issue has been posted to the flex open source site: 
 
<a href=3D"http://opensource.adobe.com/wiki/display/flexsdk/button+navigation=
anddeclarative+states">http://opensource.adobe.com/wiki/display/flexsdk/bu=
ttonnavigationanddeclarativestates
This issue concerns the new state syntax and what it means to leave a value= of a property implicit in one or more states.
Comments, suggestions, and feedback are welcome.
B_3324475544_8859892

Ned Murphy wrote:
Select the textfield that is inside the movieclip and in the properties panel you should see a dropdown for selecting the type of textfield. If you select Dynamic and then assign an instance name to the textfield you can use that instance name in your code to assign the text when the file runs. If you were to name the textfield "tField", then the code you would use inside an instance of your movieclip named "mClip1" would be...
mClip1.tField.text = "your text";
So, if I have multiple buttons, using your example, would the code read
mClip1.tField.text = "your text";
mClip1.tField2.text = "your text2";
mClip1.tField3.text = "your text3";
mClip1.tField4.text = "your text4";
And my buttons are built inside movieclips, ie
Main Timeline > aboutButton_mc > aboutText_mc > "about"
 > contactsButton_mc > contactsText_mc > "contacts"
can the code be put at any level, or does it need to reside on the Main Timeline to access all the movie clips' text fields?
Just in case this may be too complex to get into via this forum, if you know of any good tutorials, that would be awesome too!
I tried doing a search, but it's so hard to tell if they might be in AS2, or AS3, and if they would apply to newer versions of Adobe Flash (I have CS5)

New format issues

Hi,
I guess these might be issues with incomplete migration to the new format but I'll post them here nevertheless:
Incorrect post count - The "total number of posts" in the user information seems to reflect the total number of posts online at the time of the transition instead of total number of posts to date
Joined date changed - the "date joined" in the user info seems to have changed for me - no biggy but this might point to other problems
Incorrect migration of old formats - the old discussions had the editor shortcuts "ii " at the beginning of a new line to create italic text - all these post now display "i " at the start of such lines (with the text not being in bold)
Level info missing - according to the help file, a user should be able to see his/her level per topic as well as overall - I was not able to find this information at all
But then, I am happy to see that you are keeping to make improvements to this forum and I thank all of you for your work - I am especially happy about the new "Preview" button for new messages!
Andreas

Another items is:
Email Notification do not use subject of topic -
In old system the email notifications showed for example "New Formatting issues", or "Re: New Formatting issues". On new system email notifications so as example:"Apple Discussions forum "Feedback about New Discussions" has been updated by Andreas Amann", or "Apple Discussions forum "Feedback about New Discussions" has been updated by John Smith", and so on. Makes it impossible to thread post by topics because all notifications only change if the post is from another group.

Have any ideas re: G5 startup issues? Long post...

My dual processor G5 (purchased Jan. 2005) is in the shop, and, of course, out of warranty. It's been down for over two weeks. Here is the story of its demise:
Installed 10.4.9 upgrade. Began having "launch systems" and crashdump/usb crash errors thereafter. Not a lot of info online regarding these problems, so I decided to do an archive and re-install of my system software.
Started having intermittent problems restarting the G5. Either it would chime, but not kick on the monitor, chime and kick on the monitor but hang at the grey apple startup screen, or not chime at all, with which only the fans would come on. Apple Extended Hardware Test came back OK. Still had problems after removing my USB devices.
Problems continued after the reinstall of the system software, eventually to the point where I could not even boot from a CD. When the G5 did operate, after a short period of use it would freeze, and I would have to force a restart and pray it would boot up completely. It would reliably freeze after waking it from sleep, but also froze in iPhoto and Finder as well.
I have tried resetting the PMU and the PRAM with no improvement. Took it to an Apple Authorized Service Center, luckily only a couple miles from where I work. They tried booting with the Apple RAM only, then the third party RAM only, no improvement. Hard drive was completely reformatted and system reinstalled, no improvement. I am waiting to hear what else they've tried.
My G5's serial # falls outside of those involved with the power supply issues. Yet, could this be a possibility? Any other ideas as to what the problem could be, or has anyone had similar issues?
I freelance as a graphic designer and this has me in a panic. Now using the hubby's Intel iMac to run CS2 and it's a drag.
Thanks in advance.

Hi and thanks for the input. I just spoke to the Apple service guy and he still insists there is not a hardware issue. Apparently there is an Apple technical doc, available only to authorized techs, that refers to this particular issue, and the fix is a download and install (firmware, perhaps?) He has to contact Apple and confirm my G5 is within the serial # range for this particular fix.
That's my best interpretation of our discussion. He was rather cryptic. But he says it's not the power supply.
I did an archive and install because, like an idiot, I did not have anything backed up at that point. After that failed, I used up my stash of DVDs and copied gigs to our iMac until the G5 gave out. I had run the hardware test several times and each time came back clean.
Permissions were repaired before and after updates; had it freeze a couple times mid-update. Tried booting in safe mode and single-user mode and still had the same startup issues.
To add insult to injury, I purchased a LaCie Porsche external drive as an eventual backup drive whenever the G5 returns. Hooked it up to our iMac to backup the items I saved off the G5. It failed after the second use. Returned for replacement.
Thanks.
G5 Dual 2.5 MHz Mac OS X (10.4.8)

Black Macbook Startup Issues

Hey guys.
I'm having a distressful startup issue with my Macbook (13-inch, black). It's happened to me before, but that was a few months ago and everything was fine. Now it's happening again and I'm getting worried that the workaround I've found won't work anymore.
The first time it happened, I wanted to restart my computer because I had installed a bunch of things and it was running a little slow. After I restarted, I heard the "GONG", the apple appeared, and the spinning gear also appeared. It seemed to be working, but after a few minutes, the apple changed to a "do not enter" sign.
I tried resetting the P-RAM to no avail, and finally ended up starting up in Safe Mode (by holding the Shift Key) which at least allowed me to start up my computer. From there, I was able to reset and my computer started up normally after that just fine.
Now, last night, the same thing started happening. There were a few different things that happened this time. For one, I got a big gray box on my screen that told me I needed to reset my computer in a few different languages. Secondly, (the only thing I can attribute the cause to) was that I had opened iChat for the first time in 5 months or so. Shortly after is when I got the box.
So I reset and started having the same problem. I've reset in safe mode now, and am currently installing an update to OSX 10.6.3.
The only programs running at the time of the incident were:
-Google Chrome
-Text Edit
-iCal
-iTunes
Any help you guys have for me would be GREATLY appreciated! I took it to an Apple store the first time it happened and they didn't know what was wrong with it. :/

Well, after booting in Safe Mode and installing the update, it started up just fine. I am afraid that this is going to happen again, though. Any help you guys have would be GREATLY appreciated.
Thanks.

How do I create a new startup drive?

Once I get a larger drive installed to replace the 80 GB drive that came with my G5, what is the safest way to create the new startup drive?

Gi-
The best way to get going on a new drive is, after formatting the drive with Disk Utility, download SuperDuper and clone the old drive to the new drive.
The free version is excellent, and totally reliable,
The paid version makes keeping backup clones easy.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html

New StartUp Issue

Similar Messages

Maybe you are looking for