New Task changes date to 12/31/2031
When entering a new task on my Palm Desktop software (Ver 4.2 installed with Sprint Treo 755p), the software automatically puts the "due date" as 12/31/2031, even when the it's checked as "no due date". Is there a fix? Quite annoying.
thx for the help.
Post relates to: Treo 755p (Sprint)
I just bought a 755p a couple months ago. And I have this same problem - entering tasks on the Desktop will not let me leave the due date blank - it puts one in there anyway. Then, it messes up my sorting, because it won't sort the tasks properly, since I enter tasks on both my device and through the desktop.
This is not only annoying, but a serious flaw. I'm really suprised to not see a solution for this. I've also been disappointed with the fact that my old Palm device (Samsung phone) that I got 4-5 years ago, has better functionality than my current phone. (i.e. Pocket Mirror software/conduits were included in the software for the old phone, allowing me to split my syncronization with Outlook and Desktop: Calendar and Contacts with Outlook, Tasks and Memos with Palm. The new 755p is a step backwards - I have to do all on Outlook or all on Palm. Not interested in trying to buy more software to do this, and possibly cause more problems.)
Very disappointed.
Post relates to: Treo 755p (Sprint)
Similar Messages
-
How can i query new only changed data?
Hi
I'm failry new to using Oracle and have been tasked with producing a feed that gives customers incremental stock updates. What would be a good way of doing this? Are there any tricks i could use to find any records that have been updated since the last time the query was run?
I know this is a fairly open ended question but i just need pointing in the right direction.
Thanks
Siok, being an open ended question there will be many ways to implement what you need and I would expect you will get many replies. Personally I would be inclined to turn the problem around and say , if every time there is an update/change you need to inform people then a database trigger that fires on change , would be a simple and ideal way to implement such a solution. of course i don't know your exact requirements but in any case i hope this will help
-
E2 WILL add a due date to new tasks--can't get it off.
Any suggestions?
Post relates to: Tungsten E2I suppose this is the same old "all non-dated tasks are set to 12/31/2031" bug? I think the only real fix is to pretty much use the desktop software to change the due date to "no due date". Hope this helps.
Post relates to: Tungsten T5 -
Changing To New AT&T Data Plan, Breaks Voice Mail
Sorry, but I'm posting this in several iPhone Hardware Discussions, since I think it applies to all versions of iPhones.
I'm also sorry if this has been posted before, but I'm not looking for help or answers, I'm providing them.
I have been on the $30 per month unlimited data plan with AT&T. Today I decided to change to one of the lower cost, lower monthly data rate plans. I called up AT&T and they made the change.
What I didn't realize is that making this change broke my voice mail. Well, more specifically, it broke the voice mail on all 5 phones in our Family Plan.
By breaking voice mail I mean that people can no longer leave you voice mail messages. If they call you, they will get the standard message that this person does not have a voice mail box and you cannot leave them a message.
Unfortunately, you don't realize it's broke. Since no one can leave you a voice mail, you don't get any voice mail notifications. AT&T doesn't send you a message stating that they just broke your voice mail. Your voice mail is broke and you don't know it.
It was my wife who figured it out. She had several missed call notifications, but no voice mail notifications, which seemed odd. When she clicked on the voice mail icon, she was prompted to Set Up Your Voice Mail. There was no list of her existing voice mail messages. Just a button to click to start the set up process. Which she did. She was asked to enter her PIN and record an outgoing message, even though she had done this the first time she set up her voice mail. She entered both her PIN and outgoing prompt. But when she clicked Save she got an error message stating that she could not set up voice mail. Her voice mail needed to be set up, but it wouldn't let her. There was no suggestion in the prompt telling her what to do or why it was suddenly broken.
So, I called AT&T. The person I spoke said I needed to power down the phone, which I did. After powering the phone back up, voice mail was still broke. I was then transferred to AT&T tech support. That person told me power down the phone. Which I did, but with some skepticism. After powering the phone back up I was told to go back into voice mail, which was still asking me to set up my voice mail. I followed the prompts and entered my PIN and recorded my greeting. This time it worked. Not only did I get voice working again, but I could see all the old voice mails I had. Unfortunately, I cannot get any voice mail messages during the several hours it was broken because none could be recorded.
Technical support person did fix the problem. However, I had to contact all family members and we had to go through this same procedure (power off, wait, power on, re-enter a new PIN and greeting) for each and every phone. This took somewhere close to an hour of my time.
The AT&T technical support person explained to me that since I changed my data plan (from unlimited to 200 MB) new "configuration" data needed to be sent to the phone. To get this data to your phone, you have to turn the phone off so they can send the data. Then you have to renter all your voice mail data.
Incredible.
So, as I said, I'm not looking for help or answers. But I thought posting what I went through might be helpful to anyone else who might change their data plan.
Changing data plans = Broken voice mail .... Which requires a long phone call to technical support and reentering your voice mail data.
Sheesh.I've been a cell phone user since the early days of analog cellular. Back in the days of brick phones, of which I was a user.
I've been a customer of of Cellular One, Ameritech, Verizon, T Mobile, Cingular and AT&T.
I've never experienced loosing my voice mail as I did today.
I considered my voice mail broken since I could not access my visual voice mail on my phone, I could not reset my voice mail on my phone (following the prompts on my phone) and no one could leave me a voice mail message if they called me. I called AT&T customer support and they could not get my voice mail working. I'm not sure what more could be broken, but I would classify my voice mail as broken.
You may find it acceptable to have your voice mail broken (or perhaps cut off) if you change your data plan, but I don't think that's acceptable.
I don't see how I made a major change to my account. I didn't make any changes to the types of data I can send or receive. The only change I made was to opt for a lower cost plan that delivers all the same data. That change resulted in all 5 members of my family plan to loose their voice mail.
You may be correct that all this needed was for it to be reset. But, I can't reset it. The customer service person could not reset it. It took the tech support person to be able to reset it. All of which was about an hour on the phone.
I don't think this experience should be typical. Maybe it isn't. Maybe for some strange reason, in my circumstance something more went wrong. But, that's not what AT&T told me. They told me what I experienced is typical.
So, I thought I would post this for people that might experience this issue, or think about changing their data plan so that they would know what to do.
But, perhaps I was wrong in using this Discussion site to post what I thought might be helpful.
I'm sorry. I will (as I told a previous poster) delete this post. As soon I as I figure out how. -
How do you get a fillable pdf to perform a new calculation if data is changed on form
I have created a form to calculate payment terms. The forms work great however if you make a mistake inputting or change data after calculation has been preformed i need the new data to be calculated. Is there a way to do this?
thanksHi Gilad,
Thank you for the information. Unfortunately the form that I built does not provide the correct number if any data is changed.
Is there something that I am missing?
I am using the form to complete and installment loan contract
Thanks again -
Get last changed date by Program ID/Object type/Object name of a task
Hi to all.
I'm looking for a way to get last changed date of an object by task number(CR). Any SAP function or utility someone has??
For example if I have a task with the object list:
R3TR PROG ZSD_ORD_COND_P
R3TR TABL ZCNDSLCTN
LIMU REPS ZSD_ORD_COND_CLS
R3TR TRAN ZZDIS
R3TR VIEW ZSD_VBAK_KONV
I need to get last changed date for each object.
Thanks,
Yuval Kaduri, Cellcom, Israel.
Edited by: yuval kaduri on Mar 2, 2008 2:59 PMHi Venu, thanks for the input.
In the table I don't have all changes made in objects that the CR is not released. I need to know all changed date of objects even if the CR is not released. There are few tables containing the date and time object last changed for the deferent types but I'm looking for a function or some utility someone wrote that gets the CR line info as - PgmID/Obj/Object name - and gives back last changed date and time.
Thanks,
Yuval Kaduri, Cellcom, Israel. -
Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.
Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123. -
Hi!
I want to know if there's a way to edit the 'New Task' iView from the Collaboration Room.
I want to put a specific group in the field 'Assigned to' and make it fixed, where the user could not change it.
Is it possible ? If possible how can it be done ?
Thanks,
Luisahello!!
have you solved this problem? -
Change Data Capture: Unsubscribed column results in new change set record
I have an installation using Oracle 11g Change Data Capture in synchronous mode. As of writing, I have a single publication and a single subscription. The setup is pretty basic:
PUB_TABLE
PUB_ID*
PUB_NAME*
PUB_USELESS_FLAG
* columns are included in both the PUBLICATION and the SUBSCRIPTION. The final column is of no consequence and is excluded from both the PUBLICATION and SUBSCRIPTION.
My problem is that any time PUB_USELESS_FLAG gets updated (even if no other columns are changed), a record is written to not only the change table but the change table view. The table in question has a significant number of transactions logged against it, but only a subset of those changes are of note to the subscriber (which is why the subscriber does not listen to every column). However, since the subscription is receiving records for every change to the source table, the result is an enormous amount of overhead as the subscriber is forced to sift through numerous records that are of no consequence.
I read the Change Data Capture manual for Oracle 11g; I could not find any reference to the observed functionality. Is this a consequence of using synchronous vs. asynchronous modes of capture? Is there an option to only receive changes on subscribed columns?
Thanks in advanceBring this to the top because I have the same question. This website (http://www.bikinfo.com/HTML/CDC/CDC_Article.html) makes it sound like this problem is unavoidable.
Edited by: nik_m on Nov 10, 2011 8:04 AM
Edited by: nik_m on Nov 10, 2011 8:05 AM -
ABAP Dump when calling Function Module Starting New Task
Hi all. I have a tricky situation now, I am doing a POC on parallel processing.
I am getting an ABAP dump on the following Call Function line which is in class lcl_steer_114numc (See below for full program):
METHOD start.
CALL FUNCTION 'Z_ZZCLS_STEER_114NUMC'
STARTING NEW TASK me->id
CALLING me->finish ON END OF TASK.
ENDMETHOD. "start
However I get the following ABAP dump:
Short text
Statement "CALL FUNCTION .. DESTINATION/STARTING NEW TASK/IN BACKGROUND TASK"
The function module only contains a wait statement to simulate parallel processing. It is strange that it dumps here, because when I change the FM call to another call that has been triggered successfully from other classes, it still produces the same ABAP dump.
The background of the Proof Of Concept is to see if I can get an event to trigger the next process that depends on the outcome of the previous process. Parallel processes are run in the start methods by calling RFC.
<Garbled code removed>
Moderator Message: Please post relevant portions of the code only.
Edited by: Suhas Saha on Jul 17, 2011 1:17 PMWell, the thing is I did manage to run 3 other Function Modules asynchronously succeesfully prior to that function call, with the same exact function call syntax. Further more, I have tried editing it with your suggestion but I get the exact same dump.
The complete function group can be downloaded here (slinkee file):
https://docs.google.com/leaf?id=0B3sua1Bw4XK4ZmFhNzcwMTgtYzQ0Mi00NzQ4LTg5YTMtNDNlNWUxYTM2NTg3&hl=en_US
The complete program can be downloaded here (slinkee file):
https://docs.google.com/leaf?id=0B3sua1Bw4XK4YWJmNjU3ODYtODRmMy00Nzg2LThkNTUtZjNkNDRhZGQ3MTUw&hl=en_US
The complete ST22 dump can be found here:
https://docs.google.com/leaf?id=0B3sua1Bw4XK4ZDU1YmFkZDAtOTU5MS00ZTgwLWFlZTktNWZhMDUxMzJlZWNl&hl=en_US
Basically I ST22 gives me the following:
Runtime Errors RPERF_ILLEGAL_STATEMENT
Date and Time 17.07.2011 05:29:54
|Short text |
| Statement "CALL FUNCTION .. DESTINATION/STARTING NEW TASK/IN BACKGROUND TASK" |
|What happened? |
| Error in the ABAP Application Program |
| |
| The current ABAP program "Z_ZZB1_CLOSE_PERIOD_TEST2" had to be terminated |
| because it has |
| come across a statement that unfortunately cannot be executed. |
And it explains it here (but is not helpful / relevant at all) as I ran the program from SE38.
|Error analysis |
| There is probably an error in the program |
| "Z_ZZB1_CLOSE_PERIOD_TEST2". |
| The program was probably called in a conversion exit |
| or in a field exit. These are implemented by |
| function modules called CONVERSION_EXIT_xxxxx_INPUT/OUTPUT or |
| USER_EXIT_xxxxx_INPUT. |
| Conversion exits are triggered during screen field transports or |
| WRITE statements, field exits during field transports from the |
| screen to the ABAP/4 program. |
| In this connection, the following ABAP/4 statements are not allowed: |
| |
I hope you try to download the slinkee files and you will notice the call function I performed was no different than the other call function RFC calls that really are working. -
Hello ABAPer's,
I have got a task which i am unable to make it, its like i am one screen with Employeeno and DATE as my fields,
And program of this screen is in create, change and display mode. When i am createing Suppose if i am giving Empno as -1 and date as 12/05/2008 and then save it is saving in the table. When they go to change Empno-1 and Date as 14/05/2008 rather than 12/05/2008. In this case i have to store 14/05/2008 also for which the suggestions tht i got is to add a new field in the table to store the changed date i have added the field but i am unable to get the coding part can anyone help wth this issue.
Thkshi
as u have added one extra field in table like date type , then u can do one thing try using UPDATE like this:
UPDATE <table name> SET <field name > = sy-datum where empno = <emp no. from screen field>.
put this code below the code which inserting values to ur ztable for other two fields.
reward if helpful. -
can ny 1 give me a simple example as to WHY call function STARTING NEW TASK is used ???
i need a very very simple example to demonstrate the concepthi there...
Syntax
CALL FUNCTION func STARTING NEW TASK task
DESTINATION {dest
parameter list
{PERFORMING subr}.
Additions:
1. ...DESTINATION IN GROUP { group |DEFAULT}
2. ...{PERFORMING subr}|{CALLING meth} ON END OF TASK
Effect
Asynchronous call of a remote-capable function module specified in func using the RFC interface. You can use the addition DESTINATION to specify a single destination in dest, or to specify a group of application servers by using IN GROUP. The latter supports parallel processing of multiple function modules. The calling program is continued using the statement CALL FUNCTION, as soon as the remotely called function has been started in the target system, without having to wait for its processing to be finished. You can use PERFORMING and CALLINGto specify callback routines for copying results when the remotely called function is finished. Character-type data objects are expected for func and dest.
If the destination has not been specified, the destination NONE is used implicitly. When the destination NONE is used, a new main session is opened for the current user session. The asynchronous RFC does not support communication with external systems or programs written in other programming languages.
A character-type data object must be specified for task, one which contains for the remotely called function module a freely definable task ID that has a maximum eight digits. This task ID must be unique for each call, and is handed to the callback routines for identifying the function. Each task ID defines a separate RFC connection with its own context, meaning that, in the case of repeated function module calls of the same task ID, the global data of the relevant function group can be accessed, if the connection still exists.
In dialog processing, note that the maximum number of six main sessions cannot be exceeded, else an error message is displayed.
Addition 1
... DESTINATION IN GROUP {group|DEFAULT}
Effect
Specifying IN GROUP as a destination allows you to execute multiple function modules in parallel on a predefined group of application servers in the current SAP system.
For group, you must specify a data object of the type RZLLI_APCL from the ABAP Dictionary, one that is either initial, or one that includes the name of an RFC server group created in transaction RZ12. When specifying DEFAULT, or if group is initial, all application servers that are currently available in the current SAP system are used as a group. Only one RFC server group may be used within a program. During the first asynchronous RFC using the addition IN GROUP, the specified RFC server group is initialized. For each asynchronous RFC where the group is specified, the most suitable application server is determined automatically, and the called function module is executed on this.
If the function module cannot be executed on any application server, due to not enough resources being currently available, this leads to the predefined exception RESOURCE_FAILURE, to which a return value can be assigned, in addition to the remaining RFC exceptions. For this exception, the addition MESSAGE is not permitted.
· The parallel processing of function modules using the addition IN GROUP makes optimum use of the resources available, and is preferred to self-programmed parallel processing with destinations that are specified explicitly.
· An application server that is used as part of an RFC server group for parallel processing must have at least three dialog work processes, of which one is currently free. Other resources such as requests in the queue, number of system logons and so on, are also taken into account, and are not allowed to exceed certain limit values.
· To ensure that only those application servers that have enough resources are accessed, we recommend that you work with explicitly defined RFC server groups instead of working with the addition DEFAULT.
· The function modules of the function group SPBT provide service functions for parallel processing, for example, initialization of RFC server groups, determining the used destination, or temporarily removing an application server from an RFC server group.
Addition 2
... {PERFORMING subr}|{CALLING meth} ON END OF TASK
Effect
You can use this addition to specify either a subprogram subr or, as of Release 6.20, a method meth as a callback routine, which is executed after the asynchronously called function module has finished. For subr, you have to directly specify a subprogram of the same program. For meth, you can enter the same details as for the general method call.
The specified subprogram subr can have exactly one SING parameter of type clike only. The method meth must be public, and can have only one non-optional input parameter p_task of type clike. When the RFC interface is called, this parameter is supplied with the task ID of the remotely called function that was specified in the call in task. The results of the remote function can be received in the subprogram subr or method meth using the statement RECEIVE. In the callback routine, no statements can be executed that cause the program run to terminate or end an SAP LUW. Statements for list output are not executed.
Prerequisite for executing a callback routine is that, after the remote function has ended, the calling program is still internally available. It is then executed the next time the work process is changed. If the program has ended, or if it is part of a call sequence in the stack, then the callback routine is not executed. The statement WAIT can be used to stop the program execution until certain or all callback routines have been executed.
CALL FUNCTION - STARTING NEW TASK parameter_list
Syntax
[EXCEPTIONS exc1 = n1 exc2 = n2 ...
Effect
These additions are used to assign actual parameters to the formal parameters of the function module, and return values to exceptions that are not class-based. These additions have the same meaning as for the synchronous RFC. The only exception is that no values can be copied with IMPORTING and CHANGING.
do reward if helpful -
Hi,
I have FM 'update_table' with asynchrounous call(FM which use starting new task). This FM updates the table and commits the work.But when I try to read the datas from table I don't get the updated datas.This happens only in in real scenario.
When I try to debug the program it works fine and I get the updated data.
Let me know how to resolve the issue?
thanks
SuganyaHi,
As you want to update table in the function module, are you calling this fm in UPDATE TASK?
Here are more details about the command.
CALL FUNCTION func IN UPDATE TASK.
Extras:
... EXPORTING p1 = f1 ... pn = fn
... TABLES p1 = itab1 ... pn = itabn
Effect
Flags the function module func for execution in the update task. It is not executed at once, but the data passed with EXPORTING or TABLES is placed in a database table and a subsequent COMMIT WORK then causes the function module to be executed by the update task. Update function modules must be flagged as such in the Function Builder
The return value is not set.
Addition 1
... EXPORTING p1 = f1 ... pn = fn
Effect
Values of fields and field strings specified under EXPORTING are passed from the calling program to the function module. In the function module, the formal parameters are defined as import parameters. In the interface definition, default values must be assigned to all import parameters of the update function module.
Addition 2
... TABLES p1 = itab1 ... pn = itabn
Effect
TABLES passes references to internal tables. All table parameters of the function module must have values.
Note
With update function modules, both import parameters and exceptions are ignored when the call is made.
1. During updating processes of function modules, you may not make any calls using the language statements SUBMIT, CALL DIALOG, CALL SCREEN, CALL TRANSACTION, COMMIT WORK or ROLLBACK WORK . All other language elements that trigger a database Commit (for example, a screen change using the MESSAGE statement) also lead to a runtime error during updating.
ashish -
Facing problem in call function starting new task taskname
Hi all,
when i call a function module using starting new task, it is failing with sy-subrc 3. can anyone guide me in this.
see the code :
DATA lv_taskname(7) TYPE c VALUE 'PEM_EXE'.
CALL FUNCTION 'PEM_SCHEDULE' STARTING NEW TASK lv_taskname
EXPORTING
iv_packid = gv_packid
iv_pebid = ls_alv_out-peb_id
EXCEPTIONS
invalid_state_request = 1
database_error = 2
OTHERS = 3.
Thanks in advance.
Best Regards,
Prashantwhen i change the function module from normal to remote, it gives me a error that the "generic types are not allowed in RFC", but i have not given any generic type in the parameters.
see the signature of the function module.
*" IMPORTING
*" VALUE(IV_PACKID) TYPE CNVMBTPACK-PACKID
*" VALUE(IV_PEBID) TYPE CNVMBTPEB-PEB_ID
*" EXPORTING
*" VALUE(EV_ERROR_DETECTED) TYPE C
*" VALUE(EV_STOP) TYPE C
*" EXCEPTIONS
*" INVALID_STATE_REQUEST
*" DATABASE_ERROR
*" FORIEGN_LOCK
Can u please check it and find out the problem
Thanks,
Prasanth -
Custom Image Capture that Auto Imports the OS WIM and Creates a New Task Sequence
We just finished a consulting project where our customer requested an easy solution to capture thick images. After hearing their reasoning it made sense for their circumstances. The people that
will be managing the system will be non-technical and all they wanted was a very, very simple method of capturing and deploying images with no learning curve. They wanted the ability to Deploy the images via PXE.
This quickly became both our easiest scope project but making MDT simple for non-technical users can be challenging. The MDT capture and staging steps are pretty easy for tech savvy person but for non-technical people it presented a learning
curve that the customer wanted simplified. They didn’t want to understand sysprep, capture, importing an OS and then creating a Task Sequence to reference that new image.
So we changed the scope of our project to automate MDT to perform additional steps following the capture that would:
Automatically Import the Captured OS into the MDT Deployment Share
Automatically Create a new Task Sequence that references the newly imported image
Auto Name the Task Sequence with the Model Name, Date and Time of Capture
The Final Solution:
Customer will setup a Windows PC Thick Image (All software and drivers)
The customer will Kick-off the Sysprep and Capture Task Sequence
The customized Task Sequence will capture, import the new image, and create a new TS with the new image
Customer can then PXE boot a new computer and Deploy the image or stage to media and deploy the image
We were able to remove the import OS and create new task sequence steps and this simplified it for our customer considerably. If anyone is interested in this functionality
let me know and I can send you instructions. We used Vbscript, Powershell and PSExec.exe from PowerShell. It seems to being working pretty good so far
MDT Task Sequence Duplicator https://panaconsulting.egnyte.com/h-s/20130614/61707be809944999 Application Bundle Duplicator https://panaconsulting.egnyte.com/h-s/20130614/405e7d64e5d54610We just finished a consulting project where our customer requested an easy solution to capture thick images. After hearing their reasoning it made sense for their circumstances. The people that
will be managing the system will be non-technical and all they wanted was a very, very simple method of capturing and deploying images with no learning curve. They wanted the ability to Deploy the images via PXE.
This quickly became both our easiest scope project but making MDT simple for non-technical users can be challenging. The MDT capture and staging steps are pretty easy for tech savvy person but for non-technical people it presented a learning
curve that the customer wanted simplified. They didn’t want to understand sysprep, capture, importing an OS and then creating a Task Sequence to reference that new image.
So we changed the scope of our project to automate MDT to perform additional steps following the capture that would:
Automatically Import the Captured OS into the MDT Deployment Share
Automatically Create a new Task Sequence that references the newly imported image
Auto Name the Task Sequence with the Model Name, Date and Time of Capture
The Final Solution:
Customer will setup a Windows PC Thick Image (All software and drivers)
The customer will Kick-off the Sysprep and Capture Task Sequence
The customized Task Sequence will capture, import the new image, and create a new TS with the new image
Customer can then PXE boot a new computer and Deploy the image or stage to media and deploy the image
We were able to remove the import OS and create new task sequence steps and this simplified it for our customer considerably. If anyone is interested in this functionality
let me know and I can send you instructions. We used Vbscript, Powershell and PSExec.exe from PowerShell. It seems to being working pretty good so far
MDT Task Sequence Duplicator https://panaconsulting.egnyte.com/h-s/20130614/61707be809944999 Application Bundle Duplicator https://panaconsulting.egnyte.com/h-s/20130614/405e7d64e5d54610
I would love to get the instructions to this process, as I have a simular client.
Maybe you are looking for
-
Any help would be greatly appreciated. Thank you.
-
Advanced Benefits : How to use Person Selection Rule?
Hi, For processing Open Enrollment we need to run"Participation Process:Scheduled" Concurrent Program for a set of 300 employees.How to create a person Selection Rule for this? thanks.
-
Hi Everybody, What is the Procurement Proposals in Consumption Based Planning. What are situations the It will be created.. Thanks in advance.
-
Several client make use of the normal.dotm as they start Word 2010, The configuration in Word 2010 loads a normal.dotm on a networkshare. I have made a change to the normal.dotm that is changed fonttype and size. Several clients show that change when
-
HT4623 why i am not getting ios7 update in my ipod touch 4g
why iam not getting ios7 update in my ipod 4g