New tax code assignment to company code (sales module)

VAT % IS CHANGED TO 14% FROM 01.04.2011.
NEW TAX CODE IS CREATED BY COPYING EXISTING ONE AND THROUGH THE PRICING CONDITIONS THE VALIDITY IS CHANGED TO OLD CONDITION AS 31.03.2011 AND FOR THE CODE IT IS MAINTAINED FROM 01.04.2011.
HOW TO ASSIGN THIS NEW CODE TO COMPANY CODE?
PL HELP
Rgds,
Parijatha

Hi,
Tax code is not going to be assigned to company code.Tax code will be created for a country.
Condition records will be maintained by using this tax code or percentage/amount will be determined for this tax code which is maintained by using the T.code FTXP.
Regards,
Krishna.

Similar Messages

If Tax code assigned to company code thn in PO Taxes not calcuated properly

Hello friends,
Comapny codes 2001
I have created a New Input tax Code - AP
Desc - Input (10%Excise + 2%Ecess 1%HEcess + 4% Vat )
Basic Excise - 10%
Ecess - 2%
HEcess -1%
Vat - 4%
I have maintained the Tax code in FTXP & also the corresponding Percentage in FV12,
As i wanted to load it on Inventory i have given Acct key as NVV.
I have also assigned the Tax code to Company Code
JMIP Basic Excise     10%             NVV
JEC2 E Cess                2%            NVV
JSEI   HEcess               1%            NVV
JVRD Vat                      4%
Issue - If i select Tax code - AP check on Display Taxes JMIP & JEC2 are not calculated only JSEI & Vat- 1% & 4% is getting
calculated.If i remove the comapny code assignment to Tax Code then it is workign properly but at tiem of Miro will fvce problem
Can any body suggest me how to go around as if is assign to comapny code then i dont get the desired output, if
dont assign tax code then it calcualtes properly.
I need to assign it to comapny code & want the Tax properly calculated
Thanks & Regards
Shashank

Hi,
OBCL settings is already maintained.
& my Key combination is Tax code
Any other cusotmization?

Do we have one corresponding tax company code to one company code or can we have different or any number of tax company codes?

do we have one corresponding tax company code to one company code or can we have different or any number of tax company codes?

Hi Arveen,
Check calculation procedure using T.code OBYZ(IMG > Financial Accounting> Financial Accounting Global Settings--> Tax on Sales/Purchases --> Basic Settings -
> Assign Country to Calculation Procedure.)
Select new entries--Enter tax procedure for India TAXINN-TAx procedure INdia
Save.
Use T.code OBBG....select position...enter IN....against that assign the tax procedure created above and save.
Hope this resolves.Let me know if you still encounter problem.
Thanks
Aravind

How to reassign new chart of accounts to company code

I created company code, assigned fiscal year K4 to 4040 co. code. Later on I created Open/Close Posting period/Assign Company code to Fiscal Year. I prepared new chart of accounts 4040 for Canadian company.
When I tried to assign 4040 chart of accounts to my company code in Fin Actg Global Settings, I notcied that automaticlly CACA (Chart of accounts Canada was already assigned. I tried to replac CACA by 4040 But error message "Reset company code data before changing the chart of accounts"
I tried to delete G/L accounts Tnasaction code OBR1 & OBR2 But nothing changed.
I wish to assignment of chart of accounts in company code in Global settings & wish to re-assign different chart of accounts. I have not created any assignment of company code to controlling area, plant, sales organization, etcu2026 While removing this it says Reset company code data before changing the chart of accounts. Screenshot is attached.
1) When I am trying to remove assignment of K4 fiscal year to company code it does not allow me. SO how to solve this problem.
Should I delete company code & then retry the same?
Please suggest how to reassign chart of accounts to company code as no data like customer, vendor or sales transaction is made.
Pl advise solution THANKS

Hi Paul,
Thanks for the answer. I have not copy any company code to my co. code 4040. Just as new entry I created 4040 company code. In Org object Check everything about table found OK. No seprate G/L A/C is created by me for co. code 4040
To see if company code is productive means Active? In "Enter Global Parameter? Tab-->Cost of Sales Accounting ACTV is 2. When I tried to make it Inactive (Blank), it is not allowing me and showing error msg as below.
You do this in Customizing as follows: Cross-Application Components -> Bank Directory -> Change Message Control.
I checked this but asking for Application Area to put & I do not know hwat area I should put.
Am I going right as suggested by you?
I had deleted G/L accounts earlier but Sales Actg is active so sould not go ahead.
As per Venkat I had decided to delete company code, But I want to solve without deletion.
I am SD guy so asking many Qs of FICO as I am learning now.
Thanks
Reason why you are not able to delete the assignment is that, you have already created GL accounts for the COA. I hope you have not done any posting using those GL accounts.
First of all please make that you company code is not set as productive. if set prodictive you will not be able to delete any master data. So please remove the productive check(if any).
Then you try to delete the GL account that you have created for the COA. once you delete the GL account the system might ask for the deletion of the account group. After that you should be able to change the assignment.

Error " material is not assigned to company code" How do I

Hi
Guys I am getting the error
" material is not assigned to company code" How do I solve it?
Thanks
samuel

hi samuel,
this error is due to the fact that you must have assigned the plant to this material and that plant is not assigned to your company code. or the other case may be the organisational levels whic you have maintained in which you enter your sales org. check if that sales org is assigned to your company code.
in short chec all the assignments related to your enterprise structure.
Regards,
Archit

Changing plant assignment to company code

Hi,
Need your help urgenly!!!
We have a plant AXXXX assigned to company code AXXXX over a year and we have number of open PO's , GR's and delivery etc for this plant and now we want to change the assignment as plant AXXXX to be assigned to company code BXXXX.
Here i want to know the impact on MM as well as FI point of view for changing the company code assignment for the plant.
Regards
Mariappan V

Despite of the fact that OX18 allows it technically to re-assign a plant to another company than before (it must be possible as anybody can make errors which may need to be corrected), I personally would not do this for a plant which was already active. At least I would ask SAP directly for advice.
e.g. if you have stock in this plant, then the stock value will not automatically transfer from company A to company B's General ledger, just because you reassign a plant in OX18.
A purchase order has as well the company code mentioned in the header data. And there are several error messages that may come up when changing those purchase orders after a reassignment, as this company code conflicts with the new company code.

Assignment of company code to the Equipment.

Hi All,
I am new-able in sap pm please guide me.
During creation of Equipment why we are assigning the Company Code, if plant is already assign.
What is the need of company code.
Thanks & Regards,
B.K.Pathak.

You will not assign the company code manually. Once you assign Maintenance plant, system will copy from the Enterprise structure configuration.
To validate the usage of company code in equipment master:-
Asset numbers will be assigned to company code. These assets are created against company code only.
Cost centers will be assigned to equipment. Cost centers are created against company code / controlling area.
To validate the Asset & Cost Center entries in Equipment master, company code should be available in Equipment master.

Removing number assignment across company code

Hi all,
I'm new to FI-AA and am wondering if it's possible to remove the number assignment across company codes in the section "Change View "FI-AA: "Assignmt. to company code providing number range" ?
I've tried leaving the column "No.CoCd" blank as there isn't any delete icon available to remove the assignment but the system will then prompt me to fill in all required fields.
thanks
jazreel

Hi Bernhard,
thanks for the reply
It just prompts me to fill in the required fields (message no. 00055), no other error messages.
It's the same even after i try to save the changes.
regards
jazreeel
Edited by: jazreeel on Jan 10, 2011 3:43 AM

Assign Profit centre of the " X company code" to "Y company code"

Hi!
When I'm creating new "Y company code " from the "X Company code". It's automatically assign "X company code " Profit centre to New "Company code Y ". It's idealy siutation not be happen. what's are other steps r missing?
Thank & regards,
Rupang

Hi,
Check the Company code assignment to Controlling area. You would have assigned same controlling area to both the
Company Codes. In FS00 check whether new company code is displayed in the chart of account list.
Set Controlling Area OKKS and try back.
Regards,
Sadashivan

Is it possible to assign different company code employees(country grouping also different) under same Organizational Unit?

Hi SAP Experts,
In OM side, Org Unit is linked to company code "GB**" cost center, when we tried to assign new cost center(company code is GB**), system throws error "Company Code changes involves Invalid change of country". I know when we try to assign cost center, belongs to another country company code, this error comes. I checked and found that employees under OU belong to 2 different countries.Few of the employees belong to GB** company code while other employees belong to FI** company code.
Is it possible to assign different company code employees(different country code) to the same OU? if yes, how can we do that?
Please reply soon
BR,
RG

Hi RG
"Is it possible to assign different company code employees(different country code) to the same OU? if yes, how can we do that?"
Yes it is possible to assign by creating sub org unit and then assigning cost center based on the company code (and country code)
When the child org unit is created under the Parent org unit - maintain the Account assignment details - cost center details based on the company code of other countries i.e Finland and any positions created it will be under Finland and that way you can choose different countries.
Example :
Root Org unit : XYZ / OU
Sub Org units : GB / Finland / Italy / NL etc with respective cost centers
Sub Org units or positions: GB_HR / GB_Sales etc which will default the cost center from the GB org unit.
In our current clients we have more than 5 + countries under the Root Org unit and then sub org units as each country which are further divided and have respective cost centers assigned.
best wishes
V

Error--Control indicators not assigned to company code

While creating PO in IDEAS following error is coming.
"Control indicators not assigned to company code"
Pl . suggest the remedy,
Thanks a ton,
Regards,
NB

Goto T code OKKP select your co.code on left side click on Activate components.
in first tab " activate components" activate cost center , order mgmt, comm mgmt etc and save it.
Reward if useful;
Rgds
GIrish Kavital

Issue in Assignment of company codes to controlling area TKAO2 and OKKP

Hello Gurus,
I configured company code and controlling area in development client and transport to Testing client.But in QA client I can see in the Table TKA02 and respective assignment of company code to controlling area .But if I am checking in TCode OKKP and selecting Controlling area and checking the company codes assisgment there is no asssisgmnet. is this issue relating to transport as I am FICO consultant not geting solution.
This issue pertain to only one controlling area other controlling area with there company code assignment is correct.
Thanks a lot
Edited by: Manu Rathore on Apr 7, 2011 8:56 AM
Edited by: Manu Rathore on Apr 7, 2011 8:58 AM

Hello Balaji,
But I transport everything through one transport request and I haven't maintain any sequence.can this issue be due to mine non maintaining of sequence in transport request or something else?
if so How to solve it.
Many Many Thanks
Manu

Transfer posting of tax in a cross company code transaction thru' RFBUST10

Hi,
I have a doubt regarding using the program RFBUST10 transferring the tax in a cross company transaction.
I have posted an invoice entry as below and I want to transfer the tax posting of 7.00 from company code 1 to company code 2 using the program RFBUST10.
Cr - 31 - 3rd party vendor - total amount of invoice co code 1 - 214.00
Dr - 40 - expense account - 100.00 co code 1 - C7 (Tax code at 7%)
Dr - 40 - expense account - 100.00 to co code 2 C7 (Tax code at 7%)
I have successfully posted and the tax amount of 7.00 is also transferred from company code 1 to company code2 but now I have 2 problems:
1) The program (RFBUST10) is permitting to transfer tax for the same cross- company code document multiple times. Please let me know how to track whether the cross company code document is already processed for transfer posting of tax.
2) In the transfer posting document as below ,the tax code in the first line item (clearing account) is defaulted to C0 , I would like to know from where this tax code defaults, I have not maintained the default tax code in the GL master.
Dr - 40 clearing Account 107 - C0 (tax code 0%)
Cr- 50 clearing account 100 - C7(tax code at 7%)
Cr - 50 Tax account 7 C7
Please let me know how to resolve these issues.
Tks
SS

hi venkat sri,
gud day, did you manage to solve the transfer intercompany tax using program RFBUST10? Could you share the solution?
Looking forward for your reply.
Regards,
Jay

Error as no calculation procedure assigned to company code

Dear Member,
I am SAP hr Fresher, Im practising in IDES,
When i create Personal Area iam getting
Error as no calculation procedure assigned to company code???
What should i do???????
Help me out experts.......
Thanks
Jose

Please execute t-code OX02 and assign your company code to the country in which it exists.
Hope this helps,

Personnel area without assigning to Company code.

Hi All,
Can you let me know the scenario where it is not mandatory to assign a company code to the personnel area ?
Also, is it possible to configure SAP HR for a personnel area in such a situation?
Thanks & Regards, Swapnil Mishra

Hi Swapnil,
I think assignment of Personnel Area to Company Code is required when SAP HR-Payroll results are posted into Accounts, means it is required for integration of SAP HR and SAP FI. Also you will find a feature 'PPMOD' used during accounting posting also use BUKRS in decision tree.
Regds.
Suman

New tax code assignment to company code (sales module)

Similar Messages

Maybe you are looking for