New to bridge, preview not showing up... Help!

Please help!
I was using after effects and created a text layer. I was taught to go to Animation --> browse presets and it would open Adobe Bridge. Then I'd click on the 'text' folder then another folder inside of the 'text' folder such as 'Animate In'. When I use the computers at my school and click on one of the tabs in the 'content' panel, the preview of what goes on in that tab plays. But it doesn't play on my computer. Instead there's a small icon with a red square, blue circle and yellow triangle in it. How do I get it to play the preview??
Thanks!

Just needed to install quicktime. = )

Similar Messages

Bridge does not show my Camera Raw Adjustments in previews or thumbnails.

Bridge CS6 on my Mac is not showing my Camera Raw adjustments in a preview pane or thumbnail.
Here's how it worked until recently:
I open a .CR2
I make some adjustments
I click "Done"
The thumbnail and the preview show the adjustments I made
Now, it works like this:
Open a .CR2
Make adjustments
Click "Done"
The preview and thumbnail don't show all the adjustments. I can't see the results of noise removal, but I can see a drastic change in Exposure
If I double-click the CR2 file, it opens in Camera Raw, and I see all my adjustments, including noise removal.
Here's what I've tried, but saw no difference (I restarted Bridge every time):
Purge Cache
Purge Cache for Selection
Replaced Camera Raw plug-in as described here: Camera Raw 8.4 | No metadata or Camera Raw edit
     (Doing so made Camera Raw disappear in Bridge, so I restored the original file)
Reset Preferences
Reset Standard Workspaces
All the above fixes were inspired by this thread: Re: Bridge CS6 not showing Camera Raw adjustments
Why don't I see the noise removal effect in the previews? I am sure I saw it a few weeks ago. I rely on that, to help me sort and cull photos.
I'm hoping there's a preference toggle that I accidentally changed. It's definitely a puzzle. (Version: Bridge CS6 5.0.1.21 5.0.2.4)
Message was edited by: moonatwork after updating Bridge version. I tried all the above fixes again, after updating Bridge. It actually got worse. I tried replacing the Camera Raw plugin, which failed as before. I then restored the previous plugin, as before, but Bridge now fails to honor the preference, "Double-Click Edits Camera Raw Settings in Bridge" and instead always opens Photoshop.

Thanks, Omke. I tried updating, then applying all the same fixes to the updated version. No change.
I can attach a screenshot, but I must block out names and faces. All you'll see is my Bridge interface, not the faces in the portraits. Hope that helps.
My specs:
Bridge CS6 5.0.2.4
Mac OS X 10.6.8
16 GB RAM
65 GB free disk space
2 monitors, 2 graphics cards:
ATI Radeon HD 4870
Type:    GPU
Bus:    PCIe
Slot:    Slot-1
PCIe Lane Width:    x16
VRAM (Total):    512 MB
Chipset Model:    NVIDIA GeForce GT 120
Type:    GPU
Bus:    PCIe
Slot:    Slot-4
PCIe Lane Width:    x4
VRAM (Total):    512 MB

Can anyone help me as to why my raw files in bridge are not showing as thumbnails as they normally do . I can seem to fix it

Can anyone help me as to why my raw files in bridge are not showing as thumbnails as they normally do . I can seem to fix it

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I have a new iphone that is not showing up when I attempt to sync to itunes

I have a new iphone that is not showing up when I attempt to sync with itunes

Windows or Mac?
iOS: Device not recognized in iTunes for Windows
iPhone: Device not recognized in iTunes for Mac OS X
Robert, if you are using a Windows based computer, often disabling anti virus software and turning off the Firewall on the PC can help.
iTunes for Windows: Troubleshooting security software issues

Double clicking a new e-mail does NOT show whole e-mail

double clicking a new e-mail does NOT show whole e-mail unless I go to forward or reply. In other words, I may see a couple sentences, then it's just blank, no scroll bar either. This gets annoying. Anybody else get this or know how to overcome this?
eMac 800mHz Mac OS X (10.4.6)

Well, there is no such thing as an AOL type account in Mail. Such an account must be set up as either POP or IMAP. Nevertheless, knowing that the ISP for one of the accounts is AOL is useful because it seems that other people also have this problem with AOL -- see Chuck Coulson's and smackwell's posts in this thread.
I don't think I'll be able to help you with the AOL account other than telling you to try rebuilding the mailbox -- select the mailbox and choose Rebuild from the Mailbox menu. Have you tried that?
The problem shouldn't happen with the POP account, however. Do you experience the same problem with it as well?

Adobe Bridge will not show items in subfolder even when this option is checked.

Adobe Bridge will not show items in subfolder even when this option is checked. It works on one computer but not the other-both working on the same system/ version of adobe cc.
How can I fix this bug?

Check to see what is different between setups. You may want to reset prefences in the balky computer.

ITunes on new Mac Mini does not show shared libraries on network or songs on NAS drive

iTunes on new Mac Mini does not show shared libraries on network or songs on NAS drive
The latest version of iTunes on a 3-month old Mac Mini (8 gig RAM, OS 10.10.2) does not see any of the shared iTunes libraries on a MacBookPro (MBP) (OS 10.9.5) and a 14-month old Mac Mini (OS 10.9.5). And a network shared drive/media server does not appear as well. I have a Gigabite Ethernet G4 and on it, the MPB and the "old" mini I can see the various shared music libraries and NAS, but not on the new Mini.
The little house with a music note inside it that I see on the upper left corner of the iTunes 12.1 window on my MBP does not appear on iTunes 12.1 on the new Mac Mini. I have gone through all the iTunes preferences and can not find where I can turn on this feature. The new Mac Mini is on the local network and I can reach the internet successfully.
I have been using iTunes since its beginning (still have a PowerTower Pro with a working copy of SoundJam), so I am not a newbie, but this has me baffled.

May I add, that I gave full rights to the user at the Mac Mini to access and change data on the server drive for ITunes Media.

HT204380 I have bought a new iPad mini. its not showing me Facetime Installed. How should I start a Facetime ?

I have bought a new iPad mini. its not showing me Facetime Installed. How should I start a Facetime ?

Where did you buy it? facetime is barred from devices sold in some countries, due to the countries insisting upon it. UAE and other middle eastern countries are examples.
If you bought your iPad in a country that banns its use then you'll never have facetime on that device. It's locked out at the most basic level.

Hi every one if i connect wired headset to my new iPad it is not showing a headphone connected symbol .is it by default not visible or something happen thanks in advance

Hi every one if i connect wired headset to my new iPad it is not showing a headphone connected symbol .is it by default not visible or something happen thanks in advance

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

My iphone 5 is disabled and is not being read by itunes, itunes is giving me a prompt of my passcode, but that screen is not showing, please help me able my iphone.

my iphone 5 is disabled and is not being read by itunes, itunes is giving me a prompt of my passcode, but that screen is not showing, please help me able my iphone.

+Do a DFU recovery:+
+1. Open iTunes.+
+2. Connect the iPhone+
+3 Press both the home and sleep/wake buttons until the Apple icon appears (ignore the red slider if it shows).+
+4. Continue pressing the home button alone until iTunes sees your phone in recovery mode.+
+5. Follow the prompts to restore the iPhone.+
If not, take it down to mobile dealers that can reset your phone for you. All data will be lost.

My new 4S iphone is not showing in itunes and have followed all trouble shooting tips???

My new 4S iphone is not showing in itunes and have followed all trouble shooting tips. It does show in iphoto and wants to download photos. Any suggestions???

I've tried a lot of the stuff mentioned at that link and elsewhere, modifying host files etc. trying to downgrade my iPhone 4 back to 5.1.1 no luck , apple has locked up 5.1.1 for my phone and iPad . one post said I'm "stuck with iOS 6" darn I should have been more careful. I have the 5.1.1 Ispw on my MacBook its a permissions thing I don't understand. I'll post when I find a way around it and I will . iOS 6 took away most of my AirPlay functionality . to hek with iPhone 5 I'm starting to look at android. big bummer apple

BRIDGE does not show every PNG with preview

Hello there,
my CS4-BRIGDE doesn't show my PNGs with a preview thumbnail.
I use to export them from Illustrator files but even if I open them in Fireworks or Photoshop to save them again, there is no preview on my PNGs. The explorer preview shows all PNGs only Bridge does not!
I have some PNG from an unknown source (too long ago to remember) which do have a preview!
Can anyone please! help?
greg

For a quicker response, I reccommend that you post your query on the Bridge forum: http://forums.adobe.com/community/bridge

AE Animation Presets/Templates previews not showing in Bridge

I am running CS5.5 on a Mac (10.6.8) and when I want to preview a text animation preset or project template, Bridge opens and I can click through the various presets/templates, but when they play, there is no preview...only a playhead that moves and the file name:
For example:
I have the .ffx and .aet files on my hard drive where the installer put them. Any thoughts as to why the previews don't show up in Bridge?
I am new to Bridge and thus far only use it for this purpose...
Thanks in advance.
Jonathan

I have the .ffx and .aet files on my hard drive where the installer put them. Any thoughts as to why the previews don't show up in Bridge?
Otherwise then selecting the file and with right mouse click select purge cache for selection from the pop up menu I have no clue.
You might want to ask this question in the dedicated Adobe After Effects Forum, they might have a better insight for the ffx extension files:
http://forums.adobe.com/community/aftereffects_general_discussion?view=discussions&start=0

Bridge does not show image previews anymore on one of my drives

Bridge isn't showing image previews on one of my drives. I have tried resetting the preferences as well as deleting the cache to no avail.

I don't believe so, because it operates as expected in finder. It's only bridge that doesn't seem to want to create the thumbnails. I went to the thread you posted, Robert, but unfortunately I'm not on Windows and don't see any "online" or "offline" options.
Transporter is not a cloud service. It's actually a local hardware device, so it's more a network drive than anything else.

Creating new track - software catalog new product not showing up - Help!!!

Hi,
Creating a new track for custom development.
A new product has been added in the software catalog in SLD.
SLD and NWDI (netweaver 04) are on the same system.
The new product is not showing up when trying to select in the new track, Software Components for Development section. Why??
Does the server need to be restarted after adding a new product? This is difficult for us as SLD has production systems tied to it!!!
Thanks in advance
Regards, Neeta

Thanks - This did the trick. I have awarded points!!!!
Regards, Neeta

New to bridge, preview not showing up... Help!

Similar Messages

Maybe you are looking for