New to Mac questions about software

I am new to Mac. I am in need of a good client database software. The program I was using is not compatible with the Mac. I have found some that say they are Mac compatible but you need to install Windows or another type of software. I have had several people tell me not to install Windows on my Mac. Anyone have any suggestions. Help

Have a look at this thread which may answer your question:
http://discussions.apple.com/thread.jspa?messageID=6186687&#6186687

Similar Messages

New to Macs, Question about media players

Hi
im new to macs we have a macbook air, whats the most popular media player everyone uses for avi,mkv and mp4 files?
also im looking to use this to watch shows and movies at times and i was looking for a remote control hardware or app that will let me control it
but a few things one the remote has to work with whatever media application im using,if its app it has to be android which might be hard for you guys to reccomend me, and whether its hardware or app i want to be able to see my file list from the remote application or physical remote
any help would be greatly appreciated
thank you

I dare say I dont know a single Mac user that doesnt have VLC installed...... Its free and wonderful.
It digests almost everything out there (media wise)
http://www.videolan.org/vlc/download-macosx.html
Congrats on the new macbook AIr

Partitioning External Hard Drive- questions about software & filing system

I just got my macbook and I want to use my older external hard drive to transfer data between the macbook and my PC desktop. I have a Maxtor OneTouch II 300gb with only one partition. I have about 80gb of data already on the Maxtor. So my two questions are . .
1. What is the best software (prefer freeware) to partition my Maxtor and keep the data I already have on it? Or is there a better way?
2. What is the best setup for the filing system for the partitions? NTFS for one and FAT32 for the other or something else? I want to be able to both read & write to the Maxtor from both the PC and Mac. Appreciate any help anyone can throw my way.
Macbook- Black model Mac OS X (10.4.6)

I'm not quite sure of what you mean by:
I would like to avoid
moving all the stuff from the external drive to the
mac, and then having to move it all back onto the
external drive.
But most external drive was formated using fat 32 which theoretically limit to 2 TB and file size limit to 4 GB. Just put a useless file from your pc, and connect your external to your MacBook ,and see if you can copy and or delete that file from your Mac.
You can also check your HD format on PC side by: go to my computer, right click the external HD icon and select properties, and it will shows you the hd was formatted with,...
If you mean you want to format to mac format "on the fly", they might be some utilities for that on Mac side, but I'm not aware of, but why you want to re-format it if the external work for both sides without getting new format, since format that using MAc extended journaled wight result unreadable on your PC side.
Good Luck

TOP questions about Software Updates - start here

How do I update the software of my Nokia device?
You can update the software of most Nokia devices by downloading the software directly to your phone, or by using Nokia Software Updater, Nokia's free PC software.
Learn how and find out which methods are available for your device at
http://www.nokia.com/global/support/software-update/update-your-phone/
How do I know when there is new software available for my Nokia device?
There are several ways to be notified about new sw versions for each Nokia device:
1) Use Nokia Suite
Whenever you connect your device to the latest version of Nokia Suite with a compatible USB cable, Nokia Suite will check if there is an update for your device. Note that this notification only works when you use a USB cable connection.
2) Check online
You can easily check the latest available version on the
Nokia Software Update website.
Currently Nokia does not publish the expected release dates for future software versions.
What has been updated in each new software version?
Main updates are published on the
Nokia Software Update website.
Here are some of the most common questions from the Nokia Software Update FAQ:
Why has my device changed language after updating?
After an update, your Nokia device may restart in its native language. Changing back to your preferred language can be done from the phone settings. Full instructions may vary depending on the phone model, if you need help you can download the full user guide for your phone from the support pages of your country's Nokia web site - visit www.nokia.com/support for more details.
If your Nokia device was originally manufactured for use in another country or region, using Nokia Software Updater may revert the set of available device languages to the original language set.
If your preferred language is no longer available after using Nokia Software Updater, you may need to return your Nokia device to a Nokia Care point to have this language reinstated.
Other people can update their software but I cannot, although we have the same Nokia device model. What's wrong?
Update availability is based on many things, including existing Nokia device firmware version, country, and operator. It may be due to one of these variables that your Nokia device isn't eligible for updates.
Please note that your mobile service provider, operator, or carrier may not have approved the latest Nokia device firmware available.
Nokia produces many different variants of each product (for different countries and languages) and not all variants have the latest Nokia device firmware. It is our priority to update all variants as quickly as possible, and we apologise for any delay. New software may become available at a later date, however, so please check again soon.
Why doesn’t Nokia Suite detect my device?
Sometimes the drivers for your Nokia device and associated connectivity cables can become corrupted.
To resolve this, uninstall and re-install Nokia PC Suite and Nokia Software Updater:
- In your PC’s Control Panel, go to Add/Remove programs
- Uninstall Nokia Suite (if there are more than one entries uninstall all of them)
- Go to www.nokia.com/support to download and install the latest version of Nokia Suite
I am not able to use Nokia Suite on any PC and my device does not support updates directly over the air. Is there an alternative way to update my device's software?
If you are not able to use Nokia Software Updater, you can visit your nearest authorized Nokia Care Point to have your software updated. Note that this may incur a charge. Locations for Nokia Care Points globally are available at the support page for your country, for details please visit http://www.nokia.com/global/support/locations/
I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".

Nokia considers changelogs to be confidential information and does not release them to the public.
If you see any such information, it is leaked information and should therefore be treated with circumspection.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

New to imaging, Questions about ZIS

Hello there. I am a new PC tech at my local school district. I'm just starting to delve into the ever so fascinating world of Zenworks and am currently at an unclear understanding. The admin is ready and waiting to push out a setup that includes Windows Active Directory. As I've read and been lead to understand in the forums here Zenworks imaging by default is suppose to save ISD info when it does an image. Most notable is workstation name of course. I have noticed that when imaging off of the server directly this does not occur. However when I've imaged from one PC as a master to any number of others, it does occur. Is there special criteria that must happen for this to work? What I need to be able to do is image and not worry about losing PC name and the SID info, otherwise everytime we image, we will have to clear the SID info on the server and reset it on said computer(s). Any help is greatly appreciated.

Originally Posted by wsimon
Hello there. I am a new PC tech at my local school district. I'm just starting to delve into the ever so fascinating world of Zenworks and am currently at an unclear understanding. The admin is ready and waiting to push out a setup that includes Windows Active Directory. As I've read and been lead to understand in the forums here Zenworks imaging by default is suppose to save ISD info when it does an image. Most notable is workstation name of course. I have noticed that when imaging off of the server directly this does not occur. However when I've imaged from one PC as a master to any number of others, it does occur. Is there special criteria that must happen for this to work? What I need to be able to do is image and not worry about losing PC name and the SID info, otherwise everytime we image, we will have to clear the SID info on the server and reset it on said computer(s). Any help is greatly appreciated.
Once you computers have been imported into Zenworks the computer name is maintained in the Image Safe Data (ISD) within the first 60ish sectors of the hard drive outside of the partitionable space. When you reimage the machine the zenworks agent picks up on and maintains the name of the computer in the ISD.
And the reverse is true in that changing the computer name, will change the computer name in the ISD on the next reboot. From within windows you can have a look with ziswin and from the bash prompt with zisview.
Likely overly simplified as the "Just Imaged Flag" influences the direction of the synchronization per se.
In short.. you may need to set the computer name once, but not for subsequent times when you reimage. Depending upon your naming scheme you may wish to grab a utility called 'wsname' and have it on your base image, and call it with the cmdlines.txt. This should give your computer a name based upon various criteria such as serial tag.. or IP or Mac Add, etc..
kevgo.

Question about Software Updates in the Netherlands

Hello all,
! am new to the Netherlands and plan to buy the Lumia 1020. I have a question regarding FW updates over here:
Which network delivers the fastest updates generally or does the un-locked (country specific) phone get it first?
Also, if i choose to buy the phone on contract here, after the expiry of the contract, do i have to unlock the phone or will the provider do it for me? (Assuming that the phones are locked to the network in the first place, if not, please let me know!)
PS: I come from India, where we don't have phones on contracts and also receive updates very quickly!

hi mate,
generally if you want to free yourself from the constraints of networks, your best bet is to purchase an unlocked, unbranded handset from in-store or online. bear in mind that if you buy a handset from origin of another country in the EU, the warranty will still apply, but buy a 1020 that has a product code from outside the EU, then the warranty won't apply. something to be careful about.
as for operators delivering updates faster than others, this varies between updates, and really noone is able to predict this. as for the unlocking, that is between you and your network carrier, Nokia has nothing to do with this.

New to Apple, questions about using Windows, and other things

Hello all,
Today is my first day as an Apple owner. It's funny because I'm also a MCSE, MCSA, and MCP.
I purchased a 24" iMac, 2.8GHz, 4GB RAM, and 1TB Hard Drive.
I want to use Windows on my Mac so that I don't have to keep switching over to my PC. My main reason for using Windows is so that I can continue to enjoy my PC Games... mostly racing and D&D games.
So my question is... how does Windows run on bootcamp? Can I still use all of my USB controllers (like my steering wheels, joysticks, etc?)
I really havent even turned on my iMac... been too amazed at just looking at it for the first day (and also rearranging my home office).
I really just want to know from those of you who have PCs AND Macs, if you still find yourself having to go back to your PC because of incompatibilities or performance issues on the iMac?

Using BootCamp, your Windows experience is no different than if running it on a similarly configured PC. If you went with a VM running under Mac OS X (like VMWare or Parallels), there are a number of differences. However, using BootCamp you have a Mac-branded PC.
I'd point out that people have been dual-booting operating systems in this fashion for decades. Windows has no obvious in-built support for doing so, but other operating systems (like Linux, FreeBSD, etc.) have always very clearly and explicitly supported dual-booting (on Macs and regular PCs) from the get go.

New MacBook Air: questions about how to network (AirPlay, Time Capsule, Apple TV, etc)

Hi guys,
I am the new owner of a MacBook Air 13" and I've decided to upgrade my home network. Can one of you please help me identify the additional products I need to purchase in order to achieve my desired goals?
Here is what I want to do:
* I want to have a large, local, networked hard disk where I can store thousands of photos (iPhoto library) - looks like time capsule or possibly Airport Extreme would be good here
* I want to access this iPhoto library from my MBA, MBP, and iPad 2. The photos will not be stored locally on any of these devices. Is this possible, and would I experience significant slowness due to this setup? Basically i want a local cloud with massive storage.
* I could also be tempted to store my iPhoto library in Dropbox but I wonder if the laptops etc would support this? Also this much storage could get pricey.
* I would like to stream music from services like Pandora and Spotify to my home theater system, which has all kinds of optical / coponent connections (Denon receiver). Ideally I'd like to do this from any of my devices including iPad and even iPhone. I do not use iTunes.
* I would like to stream content from my devices to my TV including photos and videos, as well as basic mirroring functionality. Given I currently stream Netflix etc through Xbox this is the least important of all my desires. My tv has things like hdmi connections.
So guys do you think I can do this? Particularly the iPhoto part. Im really looking for a seamless experience in accessing my photos from any laptop.
Any tips on exactly what products I need to buy would be greatly appreciated.

Pappasbike, welcome to the discussions!
"Now my confusion comes from reading about setting the TC in bridge mode."
"The TC is only a foot or two way from the AEBS"
Last item first....if the TC is this close, it might make more sense to connect the two devices together with an ethernet cable. (Always use ethernet connections when possible for faster speeds and more reliable connections.) You would connect one end of the ethernet cable to one of the LAN ports on the Extreme and the other to the WAN port on the Time Capsule.
Bridge Mode....You only want one router doing DHCP and NAT and that is being done by the Extreme according to your post. Since the Time Capsule is also a router, you would want to configure it in Bridge Mode so that you will avoid IP conflicts and double NAT errors on your network. Do this as follows:
Open Airport Utility and click on Manual Setup for the Time Capsule.
Click on the Internet icon at the top of the pane.
Now look for the "Connection Sharing" setting near the bottom of the pane. Select "Off (Bridge Mode)
Click Update to save your new settings.

Newbie question about software installation

I just bought my first mac, testing the waters. I downloaded apple remote desktop, and am unable to install this software. I work from home and VPN to our servers. I have always used a PC. The process goes through the installation until it gets to configuring installation. It gives error unable to install. I have os x tiger 10.4.5, 700 mhz G3. Help?

Hi jasonss, and a warm welcome to the forums!
Did you download the Client or the Admin and what version please?
Have you seen these...
http://www.external.ameslab.gov/is/remote-vpn-osx.html
http://www.shiftmanager.net/~kurt/VTUNONOSX/VTUNonOSX.html
http://www.equinux.com/us/products/vpntracker/index.html

Brand new Dreamweaver user - question about SEND/SUBMIT button

Hello, all. Nice to meet you. I'm brand new to dreamweaver,
but not brand new to Design view in Frontpage - LOL.
I can create the basic website, with teh pictures,
thumbnails, multiple page cross links..etc.
My only question is I'm trying to make an application page -
basically a link from the home page that says APPLICATION.
I am familiar with adding text boxes for FIRST NAME/LAST
NAME/NUMBER/BEST TIME TO CALL...etc.
The only problem is I dont know what to do with that.
I don't think it can automatically send an email without smtp
info in the script, but I wouldnt mind letting it create a txt file
or something on the server so I can view it.
Or maybe it can send me an email, who knows.
Is there a really simple way or code I can use to have teh
send button somehow get to my email for me to view comments, names,
contact information...etc?
Remember, total beginner.
TIA

> Remember, total beginner.
The very best thing you can do is to get a good book on HTML
and CSS and
spend some time learning the underlying technology. DW is
very different
from FP, and will expect you to have some of this
understanding under your
belt.
There are only two ways to process form data -
1. Use mailto:[email protected] as the action of the form
2. Use a server-side scripting method to a) harvest the
form's data, b)
process it in some manner, e.g., enter it into a database, c)
formulate and
send an email to one or more email recipients, and d)
redirect the visitor
to some ending page
Method 1 is quite simple, and is also the least reliable. It
depends both
on your visitor having an email client already installed on
their computer -
this eliminates public computers, or home users without email
clients
installed (more and more it seems) - and on the installed
email client
responding to
the mailto call. It is not possible to use this method *and*
send the
visitor to a
thank you page as well.
Method 2a is the preferred method, since it eliminates the
problems of
method
1, but it means that you have to grapple with
server-scripting somehow (ASP,
CF, PHP, perl, etc.).
Method 2b would be to use some third-party form processing,
like
http://www.bebosoft.com/products/formstogo/.
You would have to decide which of these methods is best for
your needs,
but if it's Method 2a, then start by asking your host what
they provide for
form
processing. If it's 2b, then read their FAQ/instructions
carefully.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"JT6681" <[email protected]> wrote in
message
news:[email protected]...
> Hello, all. Nice to meet you. I'm brand new to
dreamweaver, but not brand
> new
> to Design view in Frontpage - LOL.
> I can create the basic website, with teh pictures,
thumbnails, multiple
> page
> cross links..etc.
>
> My only question is I'm trying to make an application
page - basically a
> link
> from the home page that says APPLICATION.
> I am familiar with adding text boxes for FIRST NAME/LAST
NAME/NUMBER/BEST
> TIME
> TO CALL...etc.
>
> The only problem is I dont know what to do with that.
>
> I don't think it can automatically send an email without
smtp info in the
> script, but I wouldnt mind letting it create a txt file
or something on
> the
> server so I can view it.
>
> Or maybe it can send me an email, who knows.
>
> Is there a really simple way or code I can use to have
teh send button
> somehow
> get to my email for me to view comments, names, contact
information...etc?
>
> Remember, total beginner.
>
> TIA
>

New FIOS Customer Question about hookup

Hello,
After over twenty years of cable service I just signed up for triple play with FIOS. I am very excited and hope the transition in two weeks will be uneventful! My cable company dropped HGTV and Food Network which are my two favorite channels. I work up to 12 hours a day and really looked forward to watching my shows that were TiVo'd while I was at work. After much research I hope I have made the right decision for higher quality and a significant savings.
One thing does puzzle me though. The rep over the phone told me that the FIOS after being brought into the house can connect to my cables already in the house from my old cable company. How can the quality be better than broadband if using the cables from the cable company??
Also is there a number I can call before installation to remind the installer that I have three TiVo boxes and two of them require cable cards??
Thanks
Patty
Solved!
Go to Solution.

You must be a Cablevision subscriber. Many friends and family have asked me if Verizon still has Food and HGTV and of course said yes.
The answer is yes, the existing coax cables are used within the home as long as they provide a good signal from the splitter to the TV. The reason the quality is much much better over Cablevision or any other cable provider is the TV signal comes to your house via Fiber Optics cable. The fiber optic cable then terminates into a box outside the home and then from there is split out between TV, Internet and Phone. The problem with the cable company set up is if your neighbor has a bad connection you can potentially be affected at your home.
Lastly the picture quality between Cablevision HD and FIOS HD is so noticable. My neighbor and I both bought the same TV. He is on Cablevision, I am on FIOS. When we compare the picture between our TV's his picture looks only slightly better than SD plus he also gets pixelization from time to time. My picture is 100% clearn 100% of the time.
I'm not sure about the cable cards. May be worth a call to support at 888-553-1555
Jim

New to apple, question about font sizes on show bookmarks pages

Former windows user, trying to get used to this beautiful new imac! When I am on the safari page, in the show all bookmarks page, the font is so small, and buttons to increase the size are disabled on the page! I know there must be a way to make the print bigger but how?
Thanks to all.. I think I'm learning more from reading these forums than with all the help pages.

Very sound advice (as always) Barry.
I (very briefly) considered offering the Terminal/Defaults route, but thought that Safari Enhancer was the lesser of two evils. Safari Enh does not need to be kept running after changes (like the bookmark font size) are made. & I believe most of it's functions within Safari are made by simply altering the plist file - so getting back a default configuration is very simple.... just reset safari.
keveliz : Barry's is good advice. I wouldn't put safari enhancer in the " ...here be dragons" or 'addicted to haxies' class myself... because it's just a program that you run & close afterwards - it doesn't carry on, (possibly) brewing trouble in the background.
I haven't been using Apples even a year now - but pc's & 6502 / 6800 & onwards micros since err, 1980..... & fwiw I personally think safari-enh is much safer than most 3rd party fixers ( which isn't saying much! - so Yep, I'd recommend it based on my usage )- there's good support, a useful discussions forum; although previous versions ( presumably sorted now?) could be annoying due to setting non-std options that you hadn't specifically checked - a problem if you're just starting & you wouldn't know what was a default setting & what wasn't.
None of which is intended to disagree with Barry's note of caution - be careful out there.

Odd Question about software instruments

Hello, I'm still using GB 2004 (Yes, way back before the flood ;))
I have an Alesis Q49 USB/MIDI Kybrd going to Garageband and does anyone know how to possibly control the parameters of the software instruments? (besides the mouse obiviously)
Example: Double click Classic rock organ - Click on "edit the generator preset"
(pencil icon) - Click on TREMOLO.
I would like to be able to click on the tremolo button remotely with a MIDI Command or something I am not sure what type of commands are needed to turn a 3 mouse click event in a simple on/off command.
Like playing live !!
Sorry, I know I am asking for the sky ! Any guidance is much appreciated.

it sounds like you are lacking those instruments:
http://www.bulletsandbones.com/GB/GBFAQ.html#lackingloopsinstruments
(Let the page FULLY load. The link to your answer is at the top of your screen)

Photoshop Elements 8 for Mac Question about Opening Files

Hi. I somehow must have changed some settings in Photoshop Elements and I don't know how to change them back. Whenever I open an image, it opens at a size of 34.5% and the window is sized accordingly. When I change the view to Actual Pixels, the image gets bigger but the window stays the same size as before so I need to manually resize the window. Anyway, I don't know how I accidentally set these settings as the default. I'd like Photoshop Elements to open images at 100% and have the window size be the same. Does anyone know how I can fix it? Thanks.

Elements will open an image at the largest size it can so that the whole image fits in the Active Image Area. It's the same as Fit on Screen view.
You can make the Active Image Area larger by collapsing Panels and the Project Bin.
To get your window to resize with your photo you need to choose a Preference. Go up to the Photoshop Elements menu (Edit menu for Windows users) and choose Preferences > General and click on the box next to Zoom Resizes Windows. Click OK.
Hope that Helps!
Rick
essential-photoshop-elements.com

Questions about Installing EBS R12 continued

Folks,
Hello. This post is the continue for previous post "Questions about Installing EBS R12".
While installing EBS R12 using "./rapidwiz", the Install Wizard gets to "CD Locator - Select root directory of required Rapid Install Disk. Enter location for the disk labeled. Oracle Applications Rapid Install - Database Disk 1"
I browse the directory where Database Disk 1 is located (file name: V15680-01_1of3/oraAPPDB/Disk1). Then click "OK" button, CD Locator Windows come up again and again. The Install Wizard doesn't proceed !
The above issue means some files in stage area directory are corrupted. Thus, I have deleted the stage area directory (zip files and unzipped files) and try to download a fresh EBS R12 from Oracle Edelivery to install again.
Now, the problem is that when I empty trash (EBS_R12) in Oracle Linux 5, the 3 files (V15680-01_1of3.zip, oraAppDB, oraDB) cannot be deleted from the trash, the error message is:
"You don't have permission to modify its parent folder."
The file V15680-01_1of3.zip is Rapid Install Database Disk 1 on which the install Wizard stop while installing EBS R12.
Can any folks help to solve the issue on file "V15680-01_1of3.zip" ?
that is, how to empty it from Trash ? How to have the Wizard go through it when install again ?

Please update the original thread instead of creating new one -- Re: Questions about Installing EBS R12

New to Mac questions about software

Similar Messages

Maybe you are looking for